B08_ATCH_2_UPDATED_SPECIFICATIONS_5-28-2025_0001.pdf
PDF 99 KB Posted
- Attached to
- Polyethylene Tubing IAW Workmanship and Specs Federal contract opportunity
- Solicitation number
- 140G0125Q0120
About this file
This document is a U.S. Geological Survey (USGS) specification for polyethylene tubing and packaging, detailing precise technical requirements for hydrologic instrumentation. The specification covers black polyethylene tubing with 3/8" outside diameter and 1/8" inside diameter, with +/- 0.005 tolerance, available in continuous rolls of 500 or 1000 feet. Packaging requirements mandate that tubing be coiled inside white plastic corrugated boxes with hand-hold cutouts, sized specifically for 500 ft (16 x 16 x 11) or 1000 ft (18 x 18 x 13) tube lengths, with a USGS-supplied bar code label placed on the top outside panel of each box.
The related federal contract opportunity (Solicitation Number 140G0125Q0120) is a small business set-aside for delivering polyethylene tubing to Tuscaloosa, AL within 60 days of purchase order receipt. The solicitation will be issued on 4/16/2025 with quotes due 4/22/2025 at 11:00 AM ED, targeting NAICS code 326121 with a 600-employee size standard. The anticipated contract award date is 5/30/2025, and vendors must be registered in SAM.gov. Potential bidders can submit questions to Cynthia Nicanor at cnicanor@usgs.gov before 4/18/2025 at 11:00 AM ED.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| B08_ATCH_1_UPDATED_WORKMANSHIP_5-28-2025_0001.pdf | ||
| Sol_140G0125Q0120_Amd_0001.pdf | ||
| B08_ATCH_2_SPECIFICATIONS.pdf | ||
| B08_ATCH_1_WORKMANSHIP.pdf | ||
| Sol_140G0125Q0120.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
HIF-P-01F
05-27-25
U.S. GEOLOGICAL SURVEY
WATER RESOURCES DIVISION
HYDROLOGIC INSTRUMENTATION FACILITY
SPECIFICATION
FOR
POLYETHYLENE TUBING AND PACKAGING
1. SCOPE
1.1 This specification contains the requirements for the manufacture of the polyethylene tubing used by the U.S. Geological Survey in conjunction with an orifice and conoflow sight feed assembly and a pressure sensor to receive data of changing water levels.
2. SPECIFICATIONS
. 2.1 Polyethylene tubing specifications:
Tubing, polyethylene, black, 3/8 [9.53] O.D. X 1/8 [3.18] I.D.
Tolerances are +/- .005 [0.13].
Dimensions are in inches unless otherwise noted and dimensions in [ ] are millimeters.
Tubing may be ordered as continuous rolls in lengths of:
500 feet [152.4 meters] 1000 feet [304.8 meters]
2.2 Packaging requirements:
Tubing is to be coiled inside box whereby it can be pulled from the center on the box freely, without any binding or kinking.
USGS supplied bar code label is to be placed on the top, outside panel of each box.
HIF-P-01F
05-27-25
2.3 Box specifications:
Boxes are to be white plastic corrugated material with a hand hold cut out on two (2) opposite side panels.
Box sizes required:
500 ft. tube = 16 X 16 X 11 [406 X 406 X 279] 1000 ft. tube = 18 X 18 X 13 [457 X 457 X 330]
File details come from the government source that posted it. Updated .