B08_ATCH_1_SALIENTS.pdf
PDF 80 KB Posted
- Attached to
- PFTE Churn Sample Splitters (8L) IAW Salients Federal contract opportunity
- Solicitation number
- 140G0125Q0015
About this file
This is a Salient Characteristics document specifying requirements for 8-liter PTFE Churn Splitters needed by the USGS Hydrologic Instrumentation Facility (HIF) to support sediment data collection activities at rivers and streams nationwide.
The document details precise technical specifications for the churn splitters, requiring construction from polytetrafluoroethylene (PTFE) with a high density polyethylene (HDPE) carry handle. Key dimensions include an 11.25-inch height, 8.8125-inch outer diameter, and 8.3125-inch inner diameter. Additional requirements specify an integral agitator alignment rib, a 3-inch filler hole with snap-on cap, a 1-inch center hole for the agitator handle, and a push-pull type spigot valve. All parts must be interchangeable with US SS-4 churn splitters. The equipment will be used to contain sampled water for quality analysis and restock the HIF warehouse.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| Sol_140G0125Q0015_Amd_0003.pdf | ||
| Sol_140G0125Q0015_Amd_0002.pdf | ||
| Sol_140G0125Q0015_Amd_0001.pdf | ||
| Sol_140G0125Q0015.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Salient Characteristics
The Hydrologic Instrumentation Facility (HIF) needs to procure 8-liter churn splitters to support sediment data collection activities. The units will be used at rivers and streams all over the country as needs arise.
8-Liter PTFE Churn Splitter
The Hydrologic Instrumentation Facility (HIF) needs to procure PTFE 8 liter Churn Splitter needed to re-stock the HIF warehouse. The units are used contain sampled water for quality analysis
Requirements: Churn Splitter, 8L, PTFE
Parts are manufactured using polytetrafluoroethylene (PTFE) except for the carry handle which is constructed using high density polyethylene (HDPE).
Bucket dimensions are 11.25 inches tall by 8.8125 inches outer diameter and 8.3125 inches inside diameter.
Bucket shall have an integral agitator alignment rib installed as part of the bucket
The lid has a 3 inch filler hole and has a snap on filler cap.
Top shall include a center hole of 1 inch for agitator handle to pass through
Valve shall be push-pull type spigot
Parts shall be interchangeable with all of US SS-4 churn splitters
File details come from the government source that posted it. Updated .