A04_Specs_for_JD_6135E_Tractor.pdf

PDF 128 KB Posted

Attached to
TX-FWS ANAHUAC NWR-FARM MACHINERY UTILITY TRACTOR
Solicitation number
140FS226Q0026
Issued by

About this file

This document contains detailed technical specifications for a cab tractor required for the Texas Chenier Plain Fire Zone. The tractor must feature a diesel inline 4-cylinder engine with turbocharger and air-to-air aftercooler system, rated at 135 horsepower with a minimum of 114 horsepower PTO output and 397 foot-pounds of peak torque. The engine must meet Final Tier 4 emissions standards and operate at a minimum of 2200 rpm. The transmission shall be a PowrReverser 24F/24R with wet clutch and 25 MPH PTO capability. Hydraulic system requirements include open center or gear-driven configuration with minimum 20 gallons per minute pump output and at least three selective control valves with rear break-away couplers.

Additional specifications include a standard mechanical front-wheel drive front axle with electro-hydraulic 4-wheel drive activation, flange-type rear axle with inboard planetary final drive and full locking mechanical differential, and independent 540/1000 rear power take-off. The rear hitch must provide standard category with minimum 5500-pound lift capacity. Tires are specified as 460/85R38 (rear) and 380/85R24 (front), with hydrostatic steering and 90-ampere alternator. The tractor includes a front-end loader with 620-pound bucket, 73-inch bucket length, and maximum 151.7-inch lift height. The unit must weigh approximately 10,240 pounds with maximum ballast weight not exceeding 14,250 pounds, deliver to Winnie Depot in Winnie, Texas, and include a 2-year/2000-hour warranty with service manuals and extended warranty options.

View the file

Other files

File Type Posted
Sol_140FS226Q0026.pdf PDF

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file

Text version

Texas Chenier Plain Fire Zone

Cab Tractor Specifications

Engine System

• Engine Type: Diesel inline 4 cylinder

• Rated Speed: Must be at least 2200 rpm

• Aspiration: Turbo charged w/ air to air aftercooler system

• Emissions level: Final Tier 4

• After treatment type: Diesel oxidation catalyst

• Displacement: must be at least 4.5 L

• Rated power: 135 hp

• Rated PTO: at least 114 hp

• Engine Peak Torque: must be at least 397 ft-lbs

• PTO torque rise: must be at least 30 percent

Transmission

• PowrReverser transmission: 24F/24R

• Wet Clutch

• PTO 25 MPH

Hydraulic System

• Type: Open Center or Gear Driven

• Pump rated output: at least 20 gpm

• Available at rear: at least 20 gpm

• Number of selective control valves: at least 3 SCV’s

• Rear break away couplers

Rear Hitch

• Hitch Category: Standard

• Max. lift Capacity: at least 5500 lbs

Draw bar

• Standard

• Sway chains

• Telescopic Draft links

Rear Power Take off

• Type: Independent 540/1000

• Engine rated: 2085 rpm at 540 and 2067 at 1000 rpm

Rear Axle

• Type: Flange

• Final drive type: Inboard Planetary

• Rear differential lock: Full locking Mechanical

Front Axle

• Type: Standard Mechanical Front Wheel Drive (MFWD)

• Front Axle Mechanical Lock: electro-hydraulic activation (4-wheel drive)

Tires

• 460/85R38 (Rear)

• 380/85R24 (Front)

Steering

• Hydrostatic

Electric System

• Alternator size: 90 am

• Battery options: 12 volts

• Total cold cranking amps: 925 CCA

• Telematics ready

Operator Station

• Cab: Standard

• Air suspension seat with swivel

Dimensions

• Wheelbase: 96.5 inch

• Approx shipment weight: 10,240 lbs

Maximum Weight

• Maximum ballast weight: should not exceed 14,250 lbs

Capacities

• Crankcase volume: 4 gallons

• Fuel tank: 44 gallons

• Cooling system: 4.7 gallons

• Transmission Hydraulic system: 15.3 gallons

Loader

• Bucket weight: 620 lbs

• Bucket length: 73 inches

• Maximum lift height: 151.7 inches

• Maximum lift weight 5595 lbs

• Three functional bucket

• Must have hydraulic hoses and controls

• Crappler oil lines and bracket

• Hood guard

• Ballast box

Other Specifications

• Warranty: 2 year/ 2000 hour

• Delivered to : Winnie Depot in Winnie, Texas

• Option to buy extended warranty

• Service Manuals

File details come from the government source that posted it. Updated .