A06_-_Specifications_-_Agricultural_Disk_Harrow.pdf
PDF 79 KB Posted
- Solicitation number
- 140FS225Q0163
About this file
This document is a Specifications sheet for an Agricultural Disk Harrow for the Sherburne National Wildlife Refuge (NWR) in Princeton, Minnesota. The specifications detail a general-purpose agricultural disk harrow with specific technical requirements, including a PTO horsepower range of 129-159hp, working width of 12 ft, maximum operating weight of 6500 lbs, 27 blades with 10.5-inch spacing, and maximum penetration of 9 inches. Additional requirements include notched front disks, smoothed rear disks, a single offset rigid frame, and necessary safety features like lights and safety markings.
The document outlines delivery and installation terms, specifying FOB Destination to the Sherburne National Wildlife Refuge, with delivery hours limited to Monday-Thursday from 6:00-4:30, excluding federal holidays. The contractor is responsible for delivery, pickup of a trade-in unit, and complete installation, with no government assistance provided. The technical point of contact is Kris Larson, District Fire Management Officer, who can be reached at (763)260-3473 or kris_larson@fws.gov to arrange specific delivery and pickup details.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| Sol_140FS225Q0163.pdf | ||
| B08_-_Trade-In_Form.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Specifications
Agricultural Disk Harrow
Sherburne National Wildlife Refuge (NWR)
1. Salient Specifications
• Duty Class General Purpose
• PTO Horsepower requirement 129-159hp
• Drawbar Horsepower 110-135hp
• Front hitch type Spade
• Working width 12ft.
• Transport max width 13ft
• Operating weight 6500lb max
• Number of blades 27
• Maximum penetration 9in
• Blade spacing 10.5in
• Notched front disks and Smoothed rear disks 26In preferred
• Frame type single offset ridged
• Wheel hub bearings Dual tapered roller bearings
• Tires 4 Implement 9.5L x 15in 8Ply 6 bolt
• Disk gang axle size 1.63in or 2.13in
• Rigid Scrappers
• Roller Basket on rear or Attached Harrow
• Lighting and safety Markings SMV, Safety tow chain, Lights
2. Delivery of New Unit & Pick up of (1) Trade-in
FOB Destination to:
Sherburne National Wildlife Refuge
19099 313th Avenue NW
Princeton, MN 55371
One (1) trade-in shall be picked up at:
Sherburne National Wildlife Refuge
19099 313th Avenue NW
Princeton, MN 55371
No later than seven days prior to delivery, awardee shall contact the Point of
Contact listed below, to arrange a specific time for delivery. Unloading and loading the products are the sole responsibility of the delivery carrier. No labor or equipment will be provided by the government to unload and load the supplies.
Hours are Monday-Thursday 6:00-4:30 – deliveries will not be accepted outside of these hours or on Federal Holidays.
Contact: Kris Larson (763)260-3473, kris_larson@fws.gov to arrange delivery and pickup
3. Installation:
Quotes shall include installation. All labor and parts associated with and required for installation are the sole responsibility of the contractor. No assistance or equipment will be provided by the government. Installation shall be completed according to industry standards.
4. Technical Point of Contact (POC):
Kris Larson
District Fire Management Officer
(763)260-3473
Kris_larson@fws.gov
File details come from the government source that posted it. Updated .