Class_B_SOW_0001.docx

Statement of Work

Specifications for a law enforcement vehicle upfit:

We would like to upfit 1 Chevy truck to the following law enforcement specifications. Installation of the following;

Radio Ready Wiring:

APX 8500 VHF radio wiring and mounting for receipt of radio head and “brain box” equipment, and the installation of a customer provided satellite radio system per BLM SOP. Wiring should meet BLM Vehicle Installation SOP as provided in attached document. Vendor to provide supplies and needed mounting hardware.

A custom modular police package wiring harness The wiring harness required will be a custom modular wiring harness & fuse panel with labeled wire, integrated built-in timer to eliminate battery drain, integrated “Super-Relay” to shut down all emergency lighting connections during vehicle servicing. It shall be constructed with weatherproof wiring. In addition, this unit will require a single AWG battery connection with an integrated high-amp thermal circuit breaker, contain MIL-SPEC wire crimps, MIL-SPEC 300 Amp relay and is required to be built with vehicle specific housing. This “vacation mode” will provide for the ease of servicing, security of the vehicle during servicing, non-invasive to the vehicle computer and radio systems, and reduce the chance of vehicle damage in the event of an up-fitting component electrical failure.

360° Front and Rear Intersection Lights All lights are to be mounted in inconspicuous places and should provide 360° coverage.

Take down lights.

Two 4” high intensity LED lights installed in the front grill.

Front grill guard or winch mount An installed front grill guard or mounting point to support the installation of an aftermarket winch.

Console If needed, a console that should hold the following vehicle equipment: radios, siren, light controller, and auxiliary radios specific to DRLESW specifications. It shall be of appropriate size for the vehicle.

Siren Controller and Speaker The standard plug-in siren unit is an electronic siren and integrated light controller with individually programmable switches. Switch button map will be provided to DRLESW. External speaker is to be mounted behind the OEM grill when possible.

Headlight Flasher The lights are inserts in the headlights and taillights of the law enforcement vehicle and will enhance the visibility when in use. These lights shall be weatherproof and will be installed to ensure the greatest light reflection for greater visibility. It has an in-line flasher and the ability to synchronize with other flasher units.

Tailgate Strip Lighting Two Alternating programmable 4” LED lights will be mounted in the gap between the bumper and tailgate. Light pattern will be red/blue. These lights should also have the ability to turn white when the vehicle is operated in reverse.

Vertical gun mount.

M4 securement. Gun rack must be wired hot, with vehicle off. Vertically mounted on floor with specific steps taken to limit vibration. Two hidden gun lock buttons will be installed in the forward cab, both black in color. One at the bottom driver side of the center consul, the second on the inside of the B pillar on the driver side.

Programmable battery saver & kill switch.

Set to 2 hrs. as not to interfere with radio code programming. An emergency equipment master kill switch mounted near the battery under the hood.