Sol_140FS126Q0091_Amd_0001.pdf

PDF 2 MB Posted

Attached to
ID-L SNAKE RIV COMP-SFH WASTE POND DREDG
Solicitation number
140FS126Q0091
Issued by

About this file

This document is an Amendment to Solicitation/Modification of Contract (Standard Form 30) for waste pond dredging services at Sawtooth Fish Hatchery, issued by the U.S. Fish and Wildlife Service under contract number 140FS126Q0091.

The solicitation is a small business set-aside Request for Quotation (RFQ) conducted under FAR Part 12 procedures for commercial items. The NAICS code is 562998 (All Other Miscellaneous Waste Management Services) with a product/service code of S222 (Housekeeping Waste Treatment/Storage). The work involves dredging two earthen fish waste settling ponds (approximately 20,000 square feet each with 2,600 cubic yards of sludge) and one earthen total flow sedimentation pond (approximately 75,000 square feet). The contractor must remove and properly dispose of all accumulated fish waste materials in compliance with state and local environmental requirements. The performance period runs from July 10, 2026, to September 30, 2027, with preferred construction timeframe of mid-May through mid-June or after mid-September. Site location is at Sawtooth Fish Hatchery, 10 Fish Hatchery Drive, Stanley, Idaho 83278. Quotes are due July 8, 2026, at 1700 eastern time via email to Kathy Coltran (kathryn_coltran@ios.doi.gov), with solicitation questions due by July 6, 2026. The contract will be awarded as firm-fixed-price based on best value, evaluating technical capabilities, prior experience, and price, with technical qualifications and past performance weighted significantly more than price. Respondents must provide three examples of similar past projects and be registered in SAM as active vendors with no active exclusions at time of award.

View the file

Other files

File Type Posted
Sol_140FS126Q0091_Amd_0002.pdf PDF
Sol_140FS126Q0091.pdf PDF

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file

Text version

Offers must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended, by one of the following methods:

(a) By completing items 8 and 15, and returning or (c) By separate letter or electronic communication which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDGMENT TO BE RECEIVED AT THE PLACE DESIGNATED FOR THE RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN REJECTION OF YOUR OFFER. If by virtue of this amendment you desire to change an offer already submitted, such change may be made by letter or electronic communication, provided each letter or electronic communication makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified.

E. IMPORTANT: is not is required copies to the issuing office.

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT 1. CONTRACT ID CODE

2. AMENDMENT/MODIFICATION NUMBER 3. EFFECTIVE DATE 4. REQUISITION/PURCHASE REQUISITION NUMBER 5. PROJECT NUMBER (If applicable)

7.ADMINISTERED BY (If other than Item 6) CODE

STANDARD FORM 30 (REV. 11/2016)

Prescribed by GSA FAR (48 CFR) 53.243

FACILITY CODE

9A. AMENDMENT OF SOLICITATION NUMBER

9B. DATED (SEE ITEM 11)

10A. MODIFICATION OF CONTRACT/ORDER NUMBER

10B. DATED (SEE ITEM 13)

11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS

The above numbered solicitation is amended as set forth in Item 14. is extended. is not extended.

12. ACCOUNTING AND APPROPRIATION DATA (If required) copies of the amendment; (b) By acknowledging receipt of this amendment on each copy of the offer submitted;

13. THIS ITEM APPLIES ONLY TO MODIFICATIONS OF CONTRACTS/ORDERS.

IT MODIFIES THE CONTRACT/ORDER NUMBER AS DESCRIBED IN ITEM 14.

CHECK ONE A. THIS CHANGE ORDER IS ISSUED PURSUANT TO: (Specify authority) THE CHANGES SET FORTH IN ITEM 14 ARE MADE IN THE CONTRACT ORDER

NUMBER IN ITEM 10A.

B. THE ABOVE NUMBERED CONTRACT/ORDER IS MODIFIED TO REFLECT THE ADMINISTRATIVE CHANGES (such as changes in paying office, appropriation data, etc.) SET FORTH IN ITEM 14, PURSUANT TO THE AUTHORITY OF FAR 43.103(b).

C. THIS SUPPLEMENTAL AGREEMENT IS ENTERED INTO PURSUANT TO AUTHORITY OF:

D. OTHER (Specify type of modification and authority)

Except as provided herein, all terms and conditions of the document referenced in Item 9A or 10A, as heretofore changed, remains unchanged and in full force and effect.

15C. DATE SIGNED

15A. NAME AND TITLE OF SIGNER (Type or print)

16C. DATE SIGNED

16A. NAME AND TITLE OF CONTRACTING OFFICER (Type or print)

14. DESCRIPTION OF AMENDMENT/MODIFICATION (Organized by UCF section headings, including solicitation/contract subject matter where feasible.)

PAGE

6. ISSUED BY CODE

8. NAME AND ADDRESS OF CONTRACTOR (Number, street, county, State and ZIP Code) (X)

CODE

15B. CONTRACTOR/OFFEROR

(Signature of person authorized to sign)

16B. UNITED STATES OF AMERICA

(Signature of Contracting Officer)

Previous edition unusable

PAGESOF

Contractor

The hour and date specified for receipt of Offers to sign this document and return

William Fluharty

See continuation page

FWS SAT 1

FWS, SAT Team 1 5275 Leesburg Pike Falls Church VA 22041

FS1

140FS126Q0091

06/25/2026

04/29/2026

1 22

CONTINUATION SHEET

REFERENCE NO. OF DOCUMENT BEING CONTINUED PAGES

NAME OF OFFEROR OR CONTRACTOR

SUPPLIES/SERVICES

(B)

UNIT

(D)

UNIT PRICE

(E)

AMOUNT

(F)

OPTIONAL FORM 336 (4-86)

Sponsored by GSA FAR (48 CFR) 53.110

ITEM NO.

(A)

QUANTITY

(C)

NSN 7540-01-152-8067

140FS126Q0091/0001

ID-FWS, Lower Snake River Compensation

PPR2107357_LR 1 SOLICITATION REVISION

Sawtooth FH Waste Pond Dredging

Tech POC: Brian Devlin brian_devlin@fws.gov

(986) 210-6445 Alt POC: Nathan Wiese nathan_wiese@fws.gov (208) 296-8759

Contract POC: Kathy Coltran kathryn_coltran@ios.doi.gov

Change Item 00010 to read as follows(amount shown is the obligated amount):

00010 Waste Pond Dredging

Period of Performance: 07/10/2026 to

09/30/2027

This announcement constitutes the only solicitation; quotes are being requested and a separate written solicitation will not be issued. The location for delivery and or location of services is located at -

FWS Lwr Snake Riv Cmpnstn Plan OFC, 1387 S Vinnell Way Ste 343, Boise, ID 83709- 1657.

This Request for Quotation (RFQ) is a small business set aside and is conducted under the procedures of FAR Part 12, incorporating provisions and clauses in effect through Federal Acquisition Circular 2023-04. The NAICS Code is -

562998 All Other Miscellaneous Waste Management Services $16.50, and the Primary Product/Service Code is S222 Housekeeping Waste Treatment/Storage.

Instructions

All responsible small business sources may submit a quote, which shall be considered by the agency. Award will be made as a firm-fixed-price contract. This contract will be awarded as a firm fixed price purchase order and trade off will be used to select the quote representing the best value to the government. The evaluating factors are technical capabilities, prior experience and price. When combined technical capabilities and prior experience are more important than price. Please demonstrate your technical capabilities for this requirement, and provide three examples of past experiences similar in size and scope to this requirement. You must complete and submit the attached BID SCHEDULE & OFFER EVALUATION FORM. Award will be made to a responsible source pursuant to FAR subpart 9.1. Refer to FAR provision 52.212-1 Instructions to Offerors – Commercial Items for additional submission guidance. In order to have a quote considered for award, respondent must be registered at the System for Award Management (SAM) website (https://www.sam.gov) as an active vendor by the time an award decision is necessary.

Solicitation Questions Due: July 6, 2026. to Kathy Coltran: kathryn_coltran@ios.doi.gov

Quotes Due: July 8, 2026, at 1700 eastern time. E-Mail Quote Submission to Kathy Coltran: kathryn_coltran@ios.doi.gov mailto:kathryn_coltran@ios.doi.gov mailto:kathryn_coltran@ios.doi.gov

BID SCHEDULE & OFFER EVALUATION FORM

Total Quoted Price: $__________________________

Notes:

When submitting your quote, please list the subject line as the solicitation number followed by your company name. Please also label your quote attachment the same way. For example:

140FS126Q0091 – U.S. Fish and Wildlife Service. This will ensure easy identification of emails and help prevent any submissions from being missed. If you do not receive an email response confirming that the Government has received your quote within 24 hours after the closing date and time, please follow up by emailing Kathryn_coltran@ios.doi.gov.

Vendor Information & Declarations:

Company Name: __________________________

SAM.gov UEI: __________________________

Valid Email Address: __________________________

Confirmation of Active SAM Registration with no active exclusions (Yes/No): ______________

CLIN Description Dates Price

Disposal of waste 07/2026 – 09/30/2027

Dredge 2

Settling ponds

Dredge 1

Sediment pond

Total $

United States Department of the Interior

United States Fish and Wildlife Service

Lower Snake River Compensation Plan

Sawtooth Fish Hatchery 10 Fish Hatchery Drive

Stanley, ID 83278 Phone: 208.774.3684

Subject: Dredge Settling Ponds, Sawtooth Hatchery

1. GENERAL

a. Any vendor wishing to submit a bid for this work is encouraged to make a site visit to Sawtooth Fish Hatchery to see the requirements and the constraints of the project prior to submitting a bid. The contact for this project walk-thru is Tony Folsom or Sylvia Hamilton, Sawtooth Fish Hatchery. See contact information listed under Technical Coordinators.

b. Physical Project Work Site

10 Fish Hatchery Drive, Stanley, ID 83278

c. Performance Period: 90 days from Notice to Proceed (NTP). Preferred construction time frame is mid-May through mid-June, or after mid-September for any excavation work. Contractor will coordinate with hatchery staff on specific dates of dredging due to trapping adult salmon and steelhead and the sensitivity of that process.

2. DEFINITIONS

USFWS United States Fish and Wildlife Service SFH Sawtooth Fish Hatchery LSRCP Lower Snake River Compensation Plan IDFG Idaho Fish and Game

3. SCOPE

a. The contractor is responsible for proper disposal of all waste from the project site, no exceptions.

b. Contractor will dredge two earthen fish waste settling ponds to remove accumulated fish waste. These ponds settle fish raceway cleaning water containing fish waste. Each pond is approximately 20,000 square feet and sludge volume is 2600 yd3, however dredging area could be less, contractor to verify all dimensions. Sludge material is primarily fish waste and uneaten feed; it also includes sand, silt, aquatic vegetation, and other decomposing organic materials. All removed material will be disposed of according to state and local requirements.

c. Contractor will dredge one earthen total flow sedimentation pond. This pond settles fish production water before it flows off station to the Salmon River. This pond is approximately 75,000 square feet. All removed material will be disposed of according to state and local requirement.

d. Ponds are earthen and have a hard pan bottom. Contractor will not dredge into hard pan bottom or sides.

e. The preferred approach to dredging is to use a suction dredge. Alternative methods that minimize suspended materials, may be considered; only with a detailed, written description

4. DELIVERABLES

a. The Contractor shall supply all labor, equipment, materials and supplies necessary (whether indicated or not) to perform the work and remove and dispose of any work debris.

b. The Contractor shall coordinate and perform the work to the satisfaction of the USFWS, LSRCP and IDFG in accordance with the Scope of this project.

c. The Contractor shall comply with Federal and State OSHA regulations, environmental regulations, and other local authorities having jurisdiction.

d. The Contractor will take precautions for the safety of adjacent equipment including fish being reared in nearby ponds to ensure debris, contaminants or other materials are contained to protect the surrounding environment. Including installation of floating silt fence near exit of fish waste settling pond to minimize discharge of suspended materials.

e. A written sludge material disposal plan must be submitted for approval. The plan must include how the material will be treated and moved off site. It also must include how and where final disposal will occur (this must be a disposal method generally recognized / accepted by IDEQ). Geotubes may be used to de-water sludge materials, on site; number and locations of the geotubes must be approved by the Hatchery Manager. If geotubes are used, erosion control barriers must direct decant water back to settling pond.

f. Storm water and erosion controls will be required for the project, and the Contractor will be required to obtain all necessary permits. A written stormwater and erosion control plan must be submitted and approved, prior to the Contractor beginning any active dredging.

5. INSPECTION AND ACCEPTANCE

a. The Contractor in coordination with the COR will discuss and document work activities on a daily basis and review all final work upon completion of the project.

b. The contractor must have a foreman on site when work is being performed.

c. The Contractor will, when onsite and conducting all contract tasks, mark off work areas with appropriate warning signs or barriers to preclude entry by Hatchery visitors or other unauthorized individuals.

d. Upon completion of the contract, Contractor shall remove from the vicinity all unused materials, debris, and other materials belonging to him or used under his control during construction.

e. Greening Policies and Programs: In accordance with Executive Order 13101 “Greening the Government Through Waste Prevention, Recycling and Federal Acquisition,” and with the details pertaining with this statement of work recipients of grants/cooperative agreements and/or sub-awards are to actively and systematically protect the natural processes that sustain life by whenever possible, incorporating environmentally preferable products in their activities. These measures include, but are not limited to, re-refined oil for all vehicles and heavy equipment, diverting solid waste from disposal in landfills through recycling and use of materials that reduce greenhouse gas emissions.

f. Qualifications: Expertise in excavation.

6. WARRANTY

a. If warranty repairs are made, the repairs are then under warranty for 1 year from the date of repair completion.

b. If warranty repairs are made, the repairs are then under warranty for 1 year from the date of repair completion.

7. GOVERNMENT FURNISHED MATERIALS / INFORMATION

a. Work Site and Staging Area: Coordinate with Technical Coordinators

b. The Hatchery will provide electric power and water for use in construction.

8. PLACE AND PERIOD OF PERFORMANCE:

a. The contractor may begin work June 1, 2026, and will complete all work by COB September 30, 2027.

b. The site is available from existing paved roads.

c. The contractor will be allowed to conduct this work outside of the facilities normal business hours through coordination with the Hatchery Manager and/or the Contracting Officer’s Representative given the specifications for application of the various products.

Schedules must be communicated, coordinated, and approved in advance of the work week.

9. TECHNICAL COORDINATORS

a. COR, Brian Devlin U.S. Fish and Wildlife Service Lower Snake River Compensation Plan 1387 S. Vinnell Way, Ste 343 Boise, Idaho 83709

Mobile: (986) 210-6445 Email: brian_devlin@fws.gov mailto:brian_devlin@fws.gov

b. Tony Folsom, Hatchery Manager or Sylvia Hamilton, Assistant Manager: Sawtooth 10 Fish Hatchery Drive, Stanley, ID 83278 Phone: 208.774.3684 anthony.folsom@idfg.idaho.gov, sylvia.hamilton@idfg.idaho.gov

Figure 1. Sawtooth Settling Pond, August 2025.

mailto:anthony.folsom@idfg.idaho.gov

Figure 2. Sawtooth Settling Pond, August 2025.

C – Contract Clauses

DOI ELECTRONIC INVOICING Electronic Invoicing and Payment Requirements - Invoice Processing Platform (IPP) (February 2021)

Payment requests must be submitted electronically through the U. S. Department of the Treasury's Invoice Processing Platform System (IPP).

"Payment request" means any request for contract financing payment or invoice payment by the Contractor. To constitute a proper invoice, the payment request must comply with the requirements identified in the applicable Prompt Payment clause included in the contract, or the clause 52.212-4 Contract Terms and Conditions - Commercial Items included in commercial item contracts. The IPP website address is: https://www.ipp.gov.

Under this contract, the following documents are required to be submitted as an attachment to the IPP invoice [Contracting Officer to edit and include the documentation required under this contract]:

The Contractor must use the IPP website to register access and use IPP for submitting requests for payment. The Contractor Government Business Point of Contact (as listed in SAM) will receive enrollment instructions via email from the Federal Reserve Bank of St. Louis (FRBSTL) within 3 - 5 business days of the contract award date. Contractor assistance with enrollment can be obtained by contacting the IPP Production Helpdesk via email IPPCustomerSupport@fiscal.treasury.gov or phone (866) 973-3131.

If the Contractor is unable to comply with the requirement to use IPP for submitting invoices for payment, the Contractor must submit a waiver request in writing to the Contracting Officer with its proposal or quotation.

(End of Local Clause)

52.217-8 Option To Extend Services. (NOV 1999)

The Government may require continued performance of any services within the limits and at the rates specified in the contract. These rates may be adjusted only as a result of revisions to prevailing labor rates provided by the Secretary of Labor. The option provision may be exercised more than once, but the total extension of performance hereunder shall not exceed 6 months. The Contracting Officer may exercise the option by written notice to the Contractor within 15 days.

(End of clause)

52.217-9 Option To Extend the Term of the Contract. (MAR 2000)

(a) The Government may extend the term of this contract by written notice to the Contractor within 15 days; provided that the Government gives the Contractor a preliminary written notice of its intent to extend at least 30 days before the contract expires. The preliminary notice does not commit the Government to an extension.

(b) If the Government exercises this option, the extended contract shall be considered to include this option clause.

(c) The total duration of this contract, including the exercise of any options under this clause, shall not exceed 5 years.

(End of clause)

52.222-90 Addressing DEI Discrimination by Federal Contractors (DEVIATION MAR 2026)

(a) Definitions. As used in this clause—

Program participation means membership or participation in, or access or admission to: training, mentoring, or leadership development programs; educational opportunities; clubs; associations; or similar opportunities that are sponsored or established by the contractor or subcontractor.

Racially discriminatory diversity, equity, and inclusion (DEI) activities means disparate treatment based on race or ethnicity in the recruitment, employment (e.g., hiring, promotions), contracting (e.g., vendor agreements), program participation, or allocation or deployment of an entity's resources.

(b) In connection with the performance of work under this contract, the Contractor agrees as follows:

(1) The Contractor will not engage in any racially discriminatory DEI activities;

[Type here]

(2) The Contractor will furnish all information and reports, including providing access to books, records, and accounts, as required by the Contracting Officer, for purposes of ascertaining compliance with this clause;

(3) In the event of the Contractor's or a subcontractor's noncompliance with this clause, this contract may be canceled, terminated, or suspended in whole or in part, and the Contractor or subcontractor may be declared ineligible for further Government contracts;

(4) The Contractor will report any subcontractor's known or reasonably knowable conduct that may violate this clause to the Contracting Officer and take any appropriate remedial actions directed by the Contracting Officer; and

(5) The Contractor will inform the Contracting Officer if a subcontractor sues the Contractor and the suit puts at issue, in any way, the validity of this clause.

(6) The Contractor recognizes that compliance with the requirements of this clause are material to the Government's payment decisions for purposes of 31 U.S.C. 3729(b)(4).

(c) The Contractor must include the substance of this clause, including this paragraph (c), in subcontracts at any tier, including those for commercial products and commercial services, except those where the place of delivery or performance is outside the United States.

(End of clause)

52.252-2 Clauses Incorporated by Reference. (FEB 1998)

This contract incorporates one or more clauses by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. Also, the full text of a clause may be accessed electronically at this/these address(es):

https://www.acquisition.gov/far https://www.acquisition.gov/diar https://www.acquisition.gov/far-overhaul

(End of clause)

52.203-6 Restrictions on Subcontractor Sales to the Government (JUN 2020), with Alternate I (NOV 2021) (41 U.S.C. 4704 and 10 U.S.C. 4655).

52.203-11 Certification and Disclosure Regarding Payments to Influence Certain Federal Transactions

52.203-17 Contractor Employee Whistleblower Rights (NOV 2023) (41 U.S.C. 4712); this clause does not apply to contracts of DoD, NASA, the Coast Guard, or applicable elements of the intelligence community-see FAR 3.900(a).

52.203-19 Prohibition on Requiring Certain Internal Confidentiality Agreements or Statements (JAN 2017) (section 743 of Division E, Title VII, of the Consolidated and Further Continuing Appropriations Act, 2015 (Pub. L. 113-235) and its successor provisions in subsequent appropriations acts (and as extended in continuing resolutions)).

52.204-9 Personal Identity Verification of Contractor Personnel. (JAN 2011)

52.204-13 System for Award Management Maintenance. (DEVIATION MAR 2026)

52.209-6 Protecting the Government's Interest When Subcontracting With Contractors Debarred, Suspended, Proposed for Debarment, or Voluntarily Excluded. (DEVIATION MAY 2026) (31 U.S.C. 6101 note).

52.209-10 Prohibition on Contracting with Inverted Domestic Corporations (DEVIATION MAY 2026)

52.212-4 Terms and Conditions - Commercial Products and Commercial Services. (DEVIATION MAR 2026)

52.219-6 Notice of Total Small Business Set-Aside (DEVIATION JAN 2026) (15 U.S.C. 644).

52.219-9 Small Business Subcontracting Plan (DEVIATION FEB 2026) (15 U.S.C. 637(d)(4)).

52.219-14 Limitations on Subcontracting (DEVIATION JAN 2026) (15 U.S.C. 657s).

52.219-33 Nonmanufacturer Rule (DEVIATION JAN 2026) (15 U.S.C. 637(a)(17)).

52.222-3 Convict Labor (JUN 2003) (E.O. 11755).

52.222-35 Equal Opportunity for Veterans (DEVIATION MAY 2026) (38 U.S.C. 4212).

52.222-36 Equal Opportunity for Workers with Disabilities (DEVIATION MAY 2026) (29 U.S.C. 793).

52.222-37 Employment Reports on Veterans (DEVIATION MAY 2026) (38 U.S.C. 4212).

52.222-41 Service Contract Labor Standards (AUG 2018) (41 U.S.C. chapter 67).

52.222-42 Statement of Equivalent Rates for Federal Hires (MAY 2014) (29 U.S.C. 206 and 41 U.S.C. chapter 67).

52.222-43 Fair Labor Standards Act and Service Contract Labor Standards-Price Adjustment (Multiple Year and Option Contracts) (AUG 2018) (29 U.S.C. 206 and 41 U.S.C. chapter 67).

52.222-44 Fair Labor Standards Act and Service Contract Labor Standards-Price Adjustment (MAY 2014) (29 U.S.C 206 and 41 U.S.C. chapter 67).

52.222-50 Combating Trafficking in Persons (DEVIATION MAY 2026) (22 U.S.C. chapter 78 and E.O. 13627).

52.222-51 Exemption from Application of the Service Contract Labor Standards to Contracts for Maintenance, Calibration, or Repair of Certain Equipment-Requirements (MAY 2014) (41 U.S.C. chapter 67).

52.222-53 Exemption from Application of the Service Contract Labor Standards to Contracts for Certain Services- Requirements (DEVIATION MAY 2026) (41 U.S.C. chapter 67).

52.222-54 Employment Eligibility Verification (DEVIATION MAY 2026) (Executive Order 12989). (Not applicable to the acquisition of commercially available off-the-shelf items or certain other types of commercial products or commercial services as prescribed in FAR 22.1803.)

52.222-62 Paid Sick Leave Under Executive Order 13706 (JAN 2022) (E.O. 13706).

52.223-9 Estimate of Percentage of Recovered Material Content for EPA-Designated Items (MAY 2008) (42 U.S.C.

6962(c)(3)(A)(ii)). (Not applicable to the acquisition of commercially available off-the-shelf items.)

52.223-23 Sustainable Products (DEVIATION MAY 2026) (E.O. 14057, 7 U.S.C. 8102, 42 U.S.C. 6962, 42 U.S.C. 8259b, and 42 U.S.C. 7671l).

52.224-3 Privacy Training (JAN 2017) (5 U.S.C. 552a).

52.229-12 Tax on Certain Foreign Procurements (FEB 2021).

52.232-29 Terms for Financing of Purchases of Commercial Products and Commercial Services (NOV 2021) (41 U.S.C.4505, 10 U.S.C. 3805).

52.232-30 Installment Payments for Commercial Products and Commercial Services (NOV 2021) (41 U.S.C. 4505, 10 U.S.C.

3805).

52.232-33 Payment by Electronic Funds Transfer-System for Award Management (OCT 2018) (31 U.S.C. 3332).

52.232-36 Payment by Third Party (MAY 2014) (31 U.S.C. 3332).

52.233-3 Protest After Award (AUG 1996) (31 U.S.C. 3553).

52.233-4 Applicable Law for Breach of Contract Claim (OCT 2004) (Public Laws 108-77 and 108-78 (19 U.S.C. 3805 note)).

52.240-91 Security Prohibitions and Exclusions (DEVIATION MAR 2026)

52.244-6 Subcontracts for Commercial Products and Commercial Services (DEVIATION MAY 2026)

52.245-1 Government Property (SEP 2021)

D – Solicitation Provisions

52.212-2 Evaluation - Commercial Products and Commercial Services. (DEVIATION MAR 2026)

(a) The Government will award a contract resulting from this solicitation to the responsible offeror whose offer conforming to the solicitation will be most advantageous to the Government, price and other factors considered. The following factors shall be used to evaluate offers:

• Technical experience, capacity, and expertise to perform the required tasks within the period of performance and to meet all goals and objectives on schedule. Demonstrated experience with Hazardous Fuel Reduction Services, specifically within the size, location, and proximity of the current requirement.

• Technical approach to performing the required tasks as described in the statement of work addendum within the period of performance. The proposal shall include a narrative explaining how the work will be carried out in terms of the techniques, procedures, and schedule.

• Management Plan: Key Personnel shall be addressed and identified in proposals to be considered responsive. If use of a Subcontractor is part of your response to the solicitation, they should be identified in the response to the solicitation.

• Past performance. The proposal shall include three examples of successful, timely completion of similar work. The examples may come from federal, state, or local government. A Past Performance Questionnaire is attached to this solicitation. The following information shall be included:

o Name of the job (to include address) o Project Prime's name o Issuing agency or company o Contract/Identification number o Start and completion dates o Brief description of the scope of work o How the work is substantially similar to the proposed project o No less than two (2) valid references that includes: Agency name, Point of Contact, Phone Number, Email

Address

• Technical Capabilities & Past Performance when combined is significantly more than price.

(b) Options. The Government will evaluate offers for award purposes by adding the total price for all options to the total price for the basic requirement. The Government may determine that an offer is unacceptable if the option prices are significantly unbalanced. Evaluation of options shall not obligate the Government to exercise the option(s).

(c) A written notice of award or acceptance of an offer, mailed or otherwise furnished to the successful offeror within the time for acceptance specified in the offer, shall result in a binding contract without further action by either party. Before the offer's specified expiration time, the Government may accept an offer (or part of an offer), whether or not there are negotiations after its receipt, unless a written notice of withdrawal is received before award.

(End of provision)

52.252-1 Solicitation Provisions Incorporated by Reference. (FEB 1998)

This solicitation incorporates one or more solicitation provisions by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. The offeror is cautioned that the listed provisions may include blocks that must be completed by the offeror and submitted with its quotation or offer. In lieu of submitting the full text of those provisions, the offeror may identify the provision by paragraph identifier and provide the appropriate information with its quotation or offer. Also, the full text of a solicitation provision may be accessed electronically at this/these address(es):

https://www.acquisition.gov/far https://www.acquisition.gov/diar https://www.acquisition.gov/rfo

(End of provision)

52.203-11 Certification and Disclosure Regarding Payments to Influence Certain Federal Transactions (SEP 2024)

52.203-18 Prohibition on Contracting with Entities that Require Certain Internal Confidentiality Agreements or Statements— Representation (JAN 2017)

52.204-7 System for Award Management (DEVIATION MAR 2026)

52.212-1 Instructions to Offerors—Commercial Products and Commercial Services (DEVIATION MAR 2026)

52.222-18 Certification Regarding Knowledge of Child Labor for Listed End Products (FEB 2021)

52.240-90 Security Prohibitions and Exclusions Representations and Certifications (DEVIATION MAR 2026)

REGISTER OF WAGE DETERMINATIONS UNDER | U.S. DEPARTMENT OF LABOR

THE SERVICE CONTRACT ACT | EMPLOYMENT STANDARDS ADMINISTRATION

By direction of the Secretary of Labor | WAGE AND HOUR DIVISION

| WASHINGTON D.C. 20210

| Wage Determination No.: 2015-5503 Daniel W. Simms Division of | Revision No.: 28 Director Wage Determinations| Date Of Last Revision: 5/13/2026

State: Idaho

Area: Idaho Counties of Ada, Boise, Canyon, Gem and Owyhee

**Fringe Benefits Required Follow the Occupational Listing**

OCCUPATION CODE - TITLE FOOTNOTE RATE

01000 - Administrative Support And Clerical Occupations 01011 - Accounting Clerk I 18.06 01012 - Accounting Clerk II 20.28 01013 - Accounting Clerk III 22.68 01020 - Administrative Assistant 29.00 01035 - Court Reporter 24.93 01041 - Customer Service Representative I 16.77 01042 - Customer Service Representative II 18.30 01043 - Customer Service Representative III 20.54 01051 - Data Entry Operator I 17.73 01052 - Data Entry Operator II 19.35 01060 - Dispatcher, Motor Vehicle 23.46 01070 - Document Preparation Clerk 16.60 01090 - Duplicating Machine Operator 16.60 01111 - General Clerk I 16.53 01112 - General Clerk II 18.04 01113 - General Clerk III 20.24 01120 - Housing Referral Assistant 23.24 01141 - Messenger Courier 17.96 01191 - Order Clerk I 20.31 01192 - Order Clerk II 22.16 01261 - Personnel Assistant (Employment) I 18.90 01262 - Personnel Assistant (Employment) II 21.14 01263 - Personnel Assistant (Employment) III 23.56 01270 - Production Control Clerk 28.06 01290 - Rental Clerk 18.37 01300 - Scheduler, Maintenance 18.63 01311 - Secretary I 18.63 01312 - Secretary II 20.84 01313 - Secretary III 23.24 01320 - Service Order Dispatcher 20.98 01410 - Supply Technician 29.00 01420 - Survey Worker 19.56 01460 - Switchboard Operator/Receptionist 17.37 01531 - Travel Clerk I 18.67 01532 - Travel Clerk II 20.59 01533 - Travel Clerk III 23.03 01611 - Word Processor I 16.22 01612 - Word Processor II 18.21 01613 - Word Processor III 20.37

05000 - Automotive Service Occupations 05005 - Automobile Body Repairer, Fiberglass 23.40 05010 - Automotive Electrician 21.46 05040 - Automotive Glass Installer 20.21 05070 - Automotive Worker 20.21 05110 - Mobile Equipment Servicer 17.53 05130 - Motor Equipment Metal Mechanic 22.88 05160 - Motor Equipment Metal Worker 20.21 05190 - Motor Vehicle Mechanic 22.88 05220 - Motor Vehicle Mechanic Helper 16.08 05250 - Motor Vehicle Upholstery Worker 18.94 05280 - Motor Vehicle Wrecker 20.21 05310 - Painter, Automotive 21.46 05340 - Radiator Repair Specialist 20.21 05370 - Tire Repairer 18.51 05400 - Transmission Repair Specialist 22.88

07000 - Food Preparation And Service Occupations 07010 - Baker 17.27

07041 - Cook I 16.48 07042 - Cook II 18.99 07070 - Dishwasher 13.33 07130 - Food Service Worker 15.64 07210 - Meat Cutter 21.87 07260 - Waiter/Waitress 13.60

09000 - Furniture Maintenance And Repair Occupations 09010 - Electrostatic Spray Painter 21.94 09040 - Furniture Handler 12.57 09080 - Furniture Refinisher 20.52 09090 - Furniture Refinisher Helper 15.37 09110 - Furniture Repairer, Minor 18.11 09130 - Upholsterer 19.71

11000 - General Services And Support Occupations 11030 - Cleaner, Vehicles 17.45 11060 - Elevator Operator 17.22 11090 - Gardener 25.83 11122 - Housekeeping Aide 17.22 11150 - Janitor 17.22 11210 - Laborer, Grounds Maintenance 19.37 11240 - Maid or Houseman 16.73 11260 - Pruner 17.00 11270 - Tractor Operator 23.69 11330 - Trail Maintenance Worker 19.37 11360 - Window Cleaner 19.62

12000 - Health Occupations 12010 - Ambulance Driver 19.95 12011 - Breath Alcohol Technician 28.11 12012 - Certified Occupational Therapist Assistant 33.75 12015 - Certified Physical Therapist Assistant 28.78 12020 - Dental Assistant 20.32 12025 - Dental Hygienist 40.89 12030 - EKG Technician 42.70 12035 - Electroneurodiagnostic Technologist 42.70 12040 - Emergency Medical Technician 19.95 12071 - Licensed Practical Nurse I 25.13 12072 - Licensed Practical Nurse II 28.11 12073 - Licensed Practical Nurse III 31.33 12100 - Medical Assistant 21.64 12130 - Medical Laboratory Technician 23.91 12160 - Medical Record Clerk 22.38 12190 - Medical Record Technician 25.03 12195 - Medical Transcriptionist 22.95 12210 - Nuclear Medicine Technologist 49.84 12221 - Nursing Assistant I 13.55 12222 - Nursing Assistant II 15.25 12223 - Nursing Assistant III 16.64 12224 - Nursing Assistant IV 18.68 12235 - Optical Dispenser 20.01 12236 - Optical Technician 22.47 12250 - Pharmacy Technician 21.76 12280 - Phlebotomist 20.78 12305 - Radiologic Technologist 37.64 12311 - Registered Nurse I 27.39 12312 - Registered Nurse II 33.51 12313 - Registered Nurse II, Specialist 33.51 12314 - Registered Nurse III 40.54 12315 - Registered Nurse III, Anesthetist 40.54 12316 - Registered Nurse IV 48.59 12317 - Scheduler (Drug and Alcohol Testing) 34.82 12320 - Substance Abuse Treatment Counselor 30.83

13000 - Information And Arts Occupations 13011 - Exhibits Specialist I 16.78 13012 - Exhibits Specialist II 20.80 13013 - Exhibits Specialist III 25.44 13041 - Illustrator I 16.78 13042 - Illustrator II 20.80 13043 - Illustrator III 25.44 13047 - Librarian 23.03 13050 - Library Aide/Clerk 15.35 13054 - Library Information Technology Systems Administrator 20.80 13058 - Library Technician 14.89 13061 - Media Specialist I 15.00 13062 - Media Specialist II 16.78 13063 - Media Specialist III 18.71 13071 - Photographer I 17.86 13072 - Photographer II 20.28 13073 - Photographer III 25.00 13074 - Photographer IV 30.59 13075 - Photographer V 37.02 13090 - Technical Order Library Clerk 19.27 13110 - Video Teleconference Technician 23.69

14000 - Information Technology Occupations 14041 - Computer Operator I 21.10 14042 - Computer Operator II 23.60 14043 - Computer Operator III 26.30 14044 - Computer Operator IV 29.23 14045 - Computer Operator V 32.38 14071 - Computer Programmer I (see 1) 23.44 14072 - Computer Programmer II (see 1) 14073 - Computer Programmer III (see 1) 14074 - Computer Programmer IV (see 1)

14101 - Computer Systems Analyst I (see 1) 14102 - Computer Systems Analyst II (see 1) 14103 - Computer Systems Analyst III (see 1) 14150 - Peripheral Equipment Operator 21.10 14160 - Personal Computer Support Technician 29.23 14170 - System Support Specialist 32.38

15000 - Instructional Occupations 15010 - Aircrew Training Devices Instructor (Non-Rated) 33.22 15020 - Aircrew Training Devices Instructor (Rated) 40.19 15030 - Air Crew Training Devices Instructor (Pilot) 48.19 15050 - Computer Based Training Specialist / Instructor 33.22 15060 - Educational Technologist 31.70 15070 - Flight Instructor (Pilot) 48.19 15080 - Graphic Artist 24.11 15085 - Maintenance Test Pilot, Fixed, Jet/Prop 48.19 15086 - Maintenance Test Pilot, Rotary Wing 48.19 15088 - Non-Maintenance Test/Co-Pilot 48.19 15090 - Technical Instructor 23.64 15095 - Technical Instructor/Course Developer 28.91 15110 - Test Proctor 19.08 15120 - Tutor 19.08

16000 - Laundry, Dry-Cleaning, Pressing And Related Occupations 16010 - Assembler 11.90 16030 - Counter Attendant 11.90 16040 - Dry Cleaner 14.21 16070 - Finisher, Flatwork, Machine 11.90 16090 - Presser, Hand 11.90 16110 - Presser, Machine, Drycleaning 11.90 16130 - Presser, Machine, Shirts 11.90 16160 - Presser, Machine, Wearing Apparel, Laundry 11.90 16190 - Sewing Machine Operator 14.98 16220 - Tailor 15.82 16250 - Washer, Machine 12.47

19000 - Machine Tool Operation And Repair Occupations 19010 - Machine-Tool Operator (Tool Room) 29.43 19040 - Tool And Die Maker 35.79

21000 - Materials Handling And Packing Occupations 21020 - Forklift Operator 22.94 21030 - Material Coordinator 28.06 21040 - Material Expediter 28.06 21050 - Material Handling Laborer 18.83 21071 - Order Filler 17.93 21080 - Production Line Worker (Food Processing) 22.94 21110 - Shipping Packer 19.47 21130 - Shipping/Receiving Clerk 19.47 21140 - Store Worker I 13.65 21150 - Stock Clerk 19.98 21210 - Tools And Parts Attendant 22.94 21410 - Warehouse Specialist 22.94

23000 - Mechanics And Maintenance And Repair Occupations 23010 - Aerospace Structural Welder 33.91 23019 - Aircraft Logs and Records Technician 26.59 23021 - Aircraft Mechanic I 32.12 23022 - Aircraft Mechanic II 33.91 23023 - Aircraft Mechanic III 35.43 23040 - Aircraft Mechanic Helper 22.57 23050 - Aircraft, Painter 30.13 23060 - Aircraft Servicer 26.59 23070 - Aircraft Survival Flight Equipment Technician 30.13 23080 - Aircraft Worker 28.37 23091 - Aircrew Life Support Equipment (ALSE) Mechanic I 28.37 23092 - Aircrew Life Support Equipment (ALSE) Mechanic II 32.12 23110 - Appliance Mechanic 22.08 23120 - Bicycle Repairer 16.48 23125 - Cable Splicer 54.46 23130 - Carpenter, Maintenance 22.67 23140 - Carpet Layer 27.19 23160 - Electrician, Maintenance 27.40 23181 - Electronics Technician Maintenance I 28.86 23182 - Electronics Technician Maintenance II 30.65 23183 - Electronics Technician Maintenance III 34.82 23260 - Fabric Worker 25.98 23290 - Fire Alarm System Mechanic 23.88 23310 - Fire Extinguisher Repairer 24.04 23311 - Fuel Distribution System Mechanic 36.20 23312 - Fuel Distribution System Operator 28.46 23370 - General Maintenance Worker 22.74 23380 - Ground Support Equipment Mechanic 32.12 23381 - Ground Support Equipment Servicer 26.59 23382 - Ground Support Equipment Worker 28.37 23391 - Gunsmith I 24.04 23392 - Gunsmith II 27.71 23393 - Gunsmith III 31.37 23410 - Heating, Ventilation And Air-Conditioning Mechanic 25.60 23411 - Heating, Ventilation And Air Contidioning Mechanic (Research Facility) 27.03

23430 - Heavy Equipment Mechanic 30.84 23440 - Heavy Equipment Operator 28.45 23460 - Instrument Mechanic 31.37 23465 - Laboratory/Shelter Mechanic 29.43 23470 - Laborer 18.83 23510 - Locksmith 24.75 23530 - Machinery Maintenance Mechanic 29.99 23550 - Machinist, Maintenance 27.96 23580 - Maintenance Trades Helper 19.80 23591 - Metrology Technician I 31.37 23592 - Metrology Technician II 33.12 23593 - Metrology Technician III 34.61 23640 - Millwright 29.02 23710 - Office Appliance Repairer 21.16 23760 - Painter, Maintenance 21.90 23790 - Pipefitter, Maintenance 30.48 23810 - Plumber, Maintenance 28.59 23820 - Pneudraulic Systems Mechanic 31.37 23850 - Rigger 31.37 23870 - Scale Mechanic 27.71 23890 - Sheet-Metal Worker, Maintenance 30.83 23910 - Small Engine Mechanic 23.87 23931 - Telecommunications Mechanic I 30.47 23932 - Telecommunications Mechanic II 32.16 23950 - Telephone Lineman 23.55 23960 - Welder, Combination, Maintenance 23.41 23965 - Well Driller 25.49 23970 - Woodcraft Worker 31.37 23980 - Woodworker 24.04

24000 - Personal Needs Occupations 24550 - Case Manager 22.08 24570 - Child Care Attendant 13.44 24580 - Child Care Center Clerk 16.78 24610 - Chore Aide 15.82 24620 - Family Readiness And Support Services Coordinator 22.08 24630 - Homemaker 22.08

25000 - Plant And System Operations Occupations 25010 - Boiler Tender 26.52 25040 - Sewage Plant Operator 24.88 25070 - Stationary Engineer 26.52 25190 - Ventilation Equipment Tender 18.64 25210 - Water Treatment Plant Operator 24.88

27000 - Protective Service Occupations 27004 - Alarm Monitor 25.44 27007 - Baggage Inspector 17.49 27008 - Corrections Officer 25.60 27010 - Court Security Officer 25.79 27030 - Detection Dog Handler 19.57 27040 - Detention Officer 25.60 27070 - Firefighter 26.76 27101 - Guard I 17.49 27102 - Guard II 19.57 27131 - Police Officer I 31.01 27132 - Police Officer II 34.46

28000 - Recreation Occupations 28041 - Carnival Equipment Operator 17.04 28042 - Carnival Equipment Repairer 18.59 28043 - Carnival Worker 12.23 28210 - Gate Attendant/Gate Tender 17.61 28310 - Lifeguard 13.56 28350 - Park Attendant (Aide) 19.70 28510 - Recreation Aide/Health Facility Attendant 14.38 28515 - Recreation Specialist 24.40 28630 - Sports Official 15.69 28690 - Swimming Pool Operator 21.42

29000 - Stevedoring/Longshoremen Occupational Services 29010 - Blocker And Bracer 34.45 29020 - Hatch Tender 34.45 29030 - Line Handler 34.45 29041 - Stevedore I 32.30 29042 - Stevedore II 36.58

30000 - Technical Occupations 30010 - Air Traffic Control Specialist, Center (HFO) (see 2) 46.07 30011 - Air Traffic Control Specialist, Station (HFO) (see 2) 31.77 30012 - Air Traffic Control Specialist, Terminal (HFO) (see 2) 34.99 30021 - Archeological Technician I 19.77 30022 - Archeological Technician II 22.11 30023 - Archeological Technician III 27.40 30030 - Cartographic Technician 27.40 30040 - Civil Engineering Technician 29.43 30051 - Cryogenic Technician I 30.34 30052 - Cryogenic Technician II 33.51 30061 - Drafter/CAD Operator I 19.77 30062 - Drafter/CAD Operator II 22.11 30063 - Drafter/CAD Operator III 24.65 30064 - Drafter/CAD Operator IV 30.34 30081 - Engineering Technician I 16.00 30082 - Engineering Technician II 17.96

30083 - Engineering Technician III 20.09 30084 - Engineering Technician IV 24.89 30085 - Engineering Technician V 30.45 30086 - Engineering Technician VI 36.84 30090 - Environmental Technician 27.98 30095 - Evidence Control Specialist 27.40 30210 - Laboratory Technician 25.01 30221 - Latent Fingerprint Technician I 29.04 30222 - Latent Fingerprint Technician II 32.08 30240 - Mathematical Technician 27.65 30361 - Paralegal/Legal Assistant I 22.17 30362 - Paralegal/Legal Assistant II 27.47 30363 - Paralegal/Legal Assistant III 33.61 30364 - Paralegal/Legal Assistant IV 40.65 30375 - Petroleum Supply Specialist 33.51 30390 - Photo-Optics Technician 27.40 30395 - Radiation Control Technician 33.51 30461 - Technical Writer I 25.14 30462 - Technical Writer II 30.75 30463 - Technical Writer III 37.20 30491 - Unexploded Ordnance (UXO) Technician I 29.28 30492 - Unexploded Ordnance (UXO) Technician II 35.43 30493 - Unexploded Ordnance (UXO) Technician III 42.46 30494 - Unexploded (UXO) Safety Escort 29.28 30495 - Unexploded (UXO) Sweep Personnel 29.28 30501 - Weather Forecaster I 30.34 30502 - Weather Forecaster II 36.90 30620 - Weather Observer, Combined Upper Air Or Surface Programs (see 2) 24.65 30621 - Weather Observer, Senior (see 2) 27.40

31000 - Transportation/Mobile Equipment Operation Occupations 31010 - Airplane Pilot 35.43 31020 - Bus Aide 16.38 31030 - Bus Driver 23.60 31043 - Driver Courier 21.27 31260 - Parking and Lot Attendant 15.57 31290 - Shuttle Bus Driver 16.69 31310 - Taxi Driver 13.02 31361 - Truckdriver, Light 23.33 31362 - Truckdriver, Medium 25.21 31363 - Truckdriver, Heavy 27.12 31364 - Truckdriver, Tractor-Trailer 27.12

99000 - Miscellaneous Occupations 99020 - Cabin Safety Specialist 17.27 99030 - Cashier 14.92 99050 - Desk Clerk 15.19 99095 - Embalmer 29.65 99130 - Flight Follower 29.28 99251 - Laboratory Animal Caretaker I 17.39 99252 - Laboratory Animal Caretaker II 18.96 99260 - Marketing Analyst 29.15 99310 - Mortician 29.65 99410 - Pest Controller 21.66 99510 - Photofinishing Worker 15.39 99710 - Recycling Laborer 27.45 99711 - Recycling Specialist 33.56 99730 - Refuse Collector 24.09 99810 - Sales Clerk 16.29 99820 - School Crossing Guard 19.46 99830 - Survey Party Chief 26.78 99831 - Surveying Aide 18.15 99832 - Surveying Technician 24.35 99840 - Vending Machine Attendant 20.66 99841 - Vending Machine Repairer 25.96 99842 - Vending Machine Repairer Helper 20.66

Note: Executive Order (EO) 13706, Establishing Paid Sick Leave for Federal Contractors, applies to all contracts subject to the Service Contract Act for which the contract is awarded (and any solicitation was issued) on or after January 1, 2017. If this contract is covered by the EO, the contractor must provide employees with 1 hour of paid sick leave for every 30 hours they work, up to 56 hours of paid sick leave each year. Employees must be permitted to use paid sick leave for their own illness, injury or other health-related needs, including preventive care; to assist a family member (or person who is like family to the employee) who is ill, injured, or has other health-related needs, including preventive care; or for reasons resulting from, or to assist a family member (or person who is like family to the employee) who is the victim of, domestic violence, sexual assault, or stalking. Additional information on contractor requirements and worker protections under the EO is available at www.dol.gov/whd/govcontracts.

Note: Executive Order 13658 generally applies to contracts subject to the Service Contract Act that were awarded on or between January 1, 2015 and January 29, 2022, and that have not been renewed or extended on or after January 30, 2022. If a contract is subject to Executive Order 13658, the contractor must pay all covered workers at least $13.65 per hour (or the applicable wage rate listed on this wage determination, if it is higher) for all hours spent performing on the con Additional information on contractor requirements and worker protections under Executive Order 13658 is available at www.dol.gov/whd/govcontracts.

ALL OCCUPATIONS LISTED ABOVE RECEIVE THE FOLLOWING BENEFITS:

HEALTH & WELFARE: $5.55 per hour, up to 40 hours per week, or $222.00 per week or $962.00 per month

HEALTH & WELFARE EO 13706: $5.09 per hour, up to 40 hours per week, or $203.60 per week, or $882.27 per month*

*This rate is to be used only when compensating employees for performance on an SCA-covered contract also covered by EO 13706, Establishing Paid Sick Leave for Federal Contractors. A contractor may not receive credit toward its SCA obligations for any paid sick leave provided pursuant to EO 13706.

VACATION: 2 weeks paid vacation after 1 year of service with a contractor or successor, 3 weeks after 5 years, and 4 weeks after 15 years. Length of service includes the whole span of continuous service with the present contractor or successor, wherever employed, and with the predecessor contractors in the performance of similar work at the same Federal facility. (Reg. 29 CFR 4.173)

HOLIDAYS: A minimum of eleven paid holidays per year: New Year's Day, Martin Luther King Jr.'s Birthday, Washington's Birthday, Memorial Day, Juneteenth National Independence Day, Independence Day, Labor Day, Columbus Day, Veterans' Day, Thanksgiving Day, and Christmas Day. (A contractor may substitute for any of the named holidays another day off with pay in accordance with a plan communicated to the employees involved.) (See 29 CFR 4.174)

THE OCCUPATIONS WHICH HAVE NUMBERED FOOTNOTES IN PARENTHESES RECEIVE THE FOLLOWING:

1) COMPUTER EMPLOYEES: This wage determination does not apply to any individual employed in a bona fide executive, administrative, or professional capacity, as defined in 29 C.F.R. Part 541. (See 41 C.F.R. 6701(3)). Because most Computer Systems Analysts and Computer Programmers who are paid at least $27.63 per hour (or at least $684 per week if paid on a salary or fee basis) likely qualify as exempt computer professionals under 29 U.S.C. 213(a)(1) and 29 U.S.C. 213(a)(17), this wage determination may not include wage rates for all occupations within those job families. In such instances, a conformance will be necessary if there are nonexempt employees in these job families working on the contract.

Job titles vary widely and change quickly in the computer industry, and are not determinative of whether an employee is an exempt computer professional. To be exempt, computer employees who satisfy the compensation requirements must also have a primary duty that consists of:

(1) The application of systems analysis techniques and procedures, including consulting with users, to determine hardware, software or system functional specifications;

(2) The design, development, documentation, analysis, creation, testing or modification of computer systems or programs, including prototypes, based on and related to user or system design specifications;

(3) The design, documentation, testing, creation or modification of computer programs related to machine operating systems; or

(4) A combination of the aforementioned duties, the performance of which requires the same level of skills. (29 C.F.R. 541.400).

Any computer employee who meets the applicable compensation requirements and the above duties test qualifies as an exempt computer professional under both section 13(a)(1) and section 13(a)(17) of the Fair Labor Standards Act. (Field Assistance Bulletin No. 2006-3 (Dec. 14, 2006)). Accordingly, this wage determination will not apply to any exempt computer employee regardless of which of these two exemptions is utilized.

2) AIR TRAFFIC CONTROLLERS AND WEATHER OBSERVERS - NIGHT PAY & SUNDAY PAY: If you work at night as part of a regular tour of duty, you will earn a night differential and receive an additional 10% of basic pay for any hours worked between 6pm and 6am.

If you are a full-time employed (40 hours a week) and Sunday is part of your regularly scheduled workweek, you are paid at your rate of basic pay plus a Sunday premium of 25% of your basic rate for each hour of Sunday work which is not overtime (i.e. occasional work on Sunday outside the normal tour of duty is considered overtime work).

** HAZARDOUS PAY DIFFERENTIAL **

An 8 percent differential is applicable to employees employed in a position that represents a high degree of hazard when working with or in close proximity to ordnance, explosives, and incendiary materials. This includes work such as screening, blending, dying, mixing, and pressing of sensitive ordnance, explosives, and pyrotechnic compositions such as lead azide, black powder and photoflash powder.

All dry-house activities involving propellants or explosives. Demilitarization, modification, renovation, demolition, and maintenance operations on sensitive ordnance, explosives and incendiary materials. All operations involving re-grading and cleaning of artillery ranges.

A 4 percent differential is applicable to employees employed in a position that represents a low degree of hazard when working with, or in close proximity to…

This is the start of the file's text. The full file is on GovTribe.

File details come from the government source that posted it. Updated .