Sol_140A0126Q0017_Amd_0001.pdf

Offers must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended, by one of the following methods:

(a) By completing items 8 and 15, and returning or (c) By separate letter or electronic communication which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDGMENT TO BE RECEIVED AT THE PLACE DESIGNATED FOR THE RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN REJECTION OF YOUR OFFER. If by virtue of this amendment you desire to change an offer already submitted, such change may be made by letter or electronic communication, provided each letter or electronic communication makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified.

E. IMPORTANT: is not is required copies to the issuing office.

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT 1. CONTRACT ID CODE

2. AMENDMENT/MODIFICATION NUMBER 3. EFFECTIVE DATE 4. REQUISITION/PURCHASE REQUISITION NUMBER 5. PROJECT NUMBER (If applicable)

7.ADMINISTERED BY (If other than Item 6) CODE

STANDARD FORM 30 (REV. 11/2016)

Prescribed by GSA FAR (48 CFR) 53.243

FACILITY CODE

9A. AMENDMENT OF SOLICITATION NUMBER

9B. DATED (SEE ITEM 11)

10A. MODIFICATION OF CONTRACT/ORDER NUMBER

10B. DATED (SEE ITEM 13)

11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS

The above numbered solicitation is amended as set forth in Item 14. is extended. is not extended.

12. ACCOUNTING AND APPROPRIATION DATA (If required) copies of the amendment; (b) By acknowledging receipt of this amendment on each copy of the offer submitted;

13. THIS ITEM APPLIES ONLY TO MODIFICATIONS OF CONTRACTS/ORDERS.

IT MODIFIES THE CONTRACT/ORDER NUMBER AS DESCRIBED IN ITEM 14.

CHECK ONE A. THIS CHANGE ORDER IS ISSUED PURSUANT TO: (Specify authority) THE CHANGES SET FORTH IN ITEM 14 ARE MADE IN THE CONTRACT ORDER

NUMBER IN ITEM 10A.

B. THE ABOVE NUMBERED CONTRACT/ORDER IS MODIFIED TO REFLECT THE ADMINISTRATIVE CHANGES (such as changes in paying office, appropriation data, etc.) SET FORTH IN ITEM 14, PURSUANT TO THE AUTHORITY OF FAR 43.103(b).

C. THIS SUPPLEMENTAL AGREEMENT IS ENTERED INTO PURSUANT TO AUTHORITY OF:

D. OTHER (Specify type of modification and authority)

Except as provided herein, all terms and conditions of the document referenced in Item 9A or 10A, as heretofore changed, remains unchanged and in full force and effect.

15C. DATE SIGNED

15A. NAME AND TITLE OF SIGNER (Type or print)

16C. DATE SIGNED

16A. NAME AND TITLE OF CONTRACTING OFFICER (Type or print)

14. DESCRIPTION OF AMENDMENT/MODIFICATION (Organized by UCF section headings, including solicitation/contract subject matter where feasible.)

PAGE

6. ISSUED BY CODE

8. NAME AND ADDRESS OF CONTRACTOR (Number, street, county, State and ZIP Code) (X)

CODE

15B. CONTRACTOR/OFFEROR

(Signature of person authorized to sign)

16B. UNITED STATES OF AMERICA

(Signature of Contracting Officer)

Previous edition unusable

PAGESOF

Contractor

The hour and date specified for receipt of Offers to sign this document and return

Teihahnietuh McCargo

See continuation page

BIA GPRO 00001

115 4TH AVENUE SE

Contracting Office Aberdeen SD 57401-4382

A01

140A0126Q0017

01/09/2026

01/09/2026

1 4

CONTINUATION SHEET

REFERENCE NO. OF DOCUMENT BEING CONTINUED PAGES

NAME OF OFFEROR OR CONTRACTOR

SUPPLIES/SERVICES

(B)

UNIT

(D)

UNIT PRICE

(E)

AMOUNT

(F)

OPTIONAL FORM 336 (4-86)

Sponsored by GSA FAR (48 CFR) 53.110

ITEM NO.

(A)

QUANTITY

(C)

NSN 7540-01-152-8067

140A0126Q0017/0001

The purpose of this solicitation amendment is to replace the specifications attached to the original Solicitation. Please see "Updated

Specs" for the correct requirements.

Solicitation close date remains unchanged.

200 Gallon Skid Unit Required Specifications

• All aluminum construction with bright aluminum diamond plate and aluminum tubing sub-frame

• All stainless steel piping and 1/4 turn brass valves

• Two Stage High Pressure Pump: Twin impeller with water pressure gauge

• 13 HP Engine w/ electric start

• Pump able to self-prime to 19′

• Low oil protection system

• 1 gated 1-1/2″ discharge

• 1 gated 1″ pump to tank refill

• 1 gated 1″ to booster reel

• 1 gated 1-1/2″ auxiliary suction

• 1 gated 1-1/2″ tank to pump – all NST threads

• Pump that flows: 120 GPM @ 60 PSI, 100 GPM @ 85 PSI, 23 GPM @ 225 PSI

• 200 gallon poly water tank with integrated 5 gallon foam cell and baffles –

• Foam System

• Electric hose reel with 50′ of 1″ booster hose with wildland adjustable fog nozzle

• Integrated water tank sight gauge

• Adapter to refill water backpacks in the field without starting pump

• Reinforced skid plate bottom for fork lifts

• Water drafting kit that includes hand primer installed on skid; 20’ of 1.5” suction hose; Foot Valve / Strainer

• Dimensions 48”W x 94”L x 45”H with pump on pump platform

As for the UTV amendment, here are the specs:

UTV Skid Unit required Specifications

• All aluminum construction

• All stainless steel piping & brass valves

• Two Stage High-Pressure Pump: Twin impeller with water pressure gauge

• Gas-driven pump 6.5 HP engine with electric start and able to self-prime to 19′

• Hand Primer

• Nitrile rubber seal & casing “O” rings

• Low oil protection

• Flows 65 GPM @ 48 PSI; 50 GPM @ 81 PSI; 20 GPM @ 120 PSI

• 1 gated 1-1/2″ discharge

• 1 gated 1″ discharge

• 1 gated 1″ pump to tank refill

• 1 gated 1″ to booster reel

• 1 gated 1-1/2″ auxiliary suction

• 1 gated 1-1/2″ tank to pump

• 70 gallon poly water tank

• Hose Reel manual crank with 100′ of 3/4″ Booster Hose

• Around the pump 1-1/2″ line with shut off for water pack refill

• Water tank sight gauge

• Dimensions: 48”W x 34”L x 38”H or 48"W x 55"L x 38"H

Sponsored by GSA FAR (48 CFR) 53.110