Specifications_-_amendment_1_0001.pdf

John Deere Z950M ZTrak™ Zero-Turn Mower (Brand Name or Equivalent)

KEY SPECS

Engine Manufacturer/model FX850V

Engine Power Gross at 3,600 rpm: 27 hp; 20.1 kW

Fuel tank capacity 11.5 U.S. gal.; 43.5 L

Mower deck Size 72 in.; 183 cm

Blade tip speed Approximately 18,000 fpm; 4,486 m/min

Transmission Hydrostatic

Speed range 0-10 mph; 0-16.1 km/h

Drive wheels 24x12-12

Caster wheels 13x6.5-6

Warranty 36 months or 1200 hours, whichever comes first;; First 24 months, no hour limitation

ENGINE

Manufacturer/Model FX850V

Power Gross at 3,600 rpm: 27 hp; 20.1 kW

Displacement 52 cu in.; 852 cc

Cylinders Two

Crankcase capacity With filter, 2 U.S. qt; 1.9 L

Oil filter Full flow, replaceable

Lubrication Full pressure

Cooling Air

Air cleaner Pre-cleaner; Heavy-duty canister type with safety element

FUEL SYSTEM

Fuel type Gasoline

Fuel consumption Under normal conditions, load, operation, and dependent on loads and operating conditions 1.1-1.9 U.S. gal./hr; 4.2-7.2 L/hr

Fuel tank capacity 11.5 U.S. gal.; 43.5 L

Fuel tank switch/shut-off valve Yes

ELECTRICAL SYSTEM

Charge system 20 amp

Battery voltage 12 V

Cold cranking amp 300 amp

Hour meter Standard, digital

Operator presence starting system Brake-N-Go (hand)

DRIVETRAIN

Transmission Hydrostatic

Wheel motors Tuff Torq heavy-duty integrated piston wheel motor

Travel speed Speed range 0-10 mph 0-16.1 km/h; Forward 0-10 mph 0-16.1 km/h; Reverse 0-4.5 mph 0-7.2 km/h

Speed and direction control Twin levers

Hydraulic capacity 5.9 U.S. qt; 5.6 L

Filter Internal, replaceable

BUYER'S NOTE

Warranty 36 months or 1200 hours, whichever comes first; First 24 months, no hour limitation

TIRES

Drive wheels 24x12-12

Load rating 4 PR

BRAKES

Dynamic braking Twin levers

Park brake Internal wet disk integrated in the transmission

Park brake actuation Hand brake

PTO

Type Electro-magnetic, 225 lb-ft; 305 Nm

Drive V-belt

MOWER DECKS

Size 72 in.; 183 cm

Deck construction 7-Iron PRO, one-piece stamped steel with reinforcements

Deck thickness 7 gauge 0.18 in. 4.6 mm

Discharge Side, MOD

Height-of-cut range Increments 0.25 in. 0.64 cm 1-5.5 in. 2.54-14 cm

Cutting width 72 in.; 183 cm

BLADES

Length Varies by deck size

Thickness 0.25 in.; 0.64 cm

Blade tip speed Approximately 18,000 fpm; 5,486 m/min

Number Three

WHEELS

Caster wheel type Flat free

Caster wheels 13x6.5-6

Front anti-scalp rollers RH, center, LH

Rear anti-scalp rollers Optional

DIMENSIONS

Length 84 in. 213 cm

Width With chute down, 74, 86 in.; 188, 218 cm

Height With ROPS up, 73 in. 185 cm; With ROPS down, 47 in. 119 cm

Weight 1,275 to 1,365 lb; 578 to 619 kg