1391103-event.pdf
PDF 268 KB Posted
- Attached to
- Sanding Material 2 Locations Kalispell Area
- Solicitation number
- MDT-316506-MS
- Issued by
- Flathead County, Judith Gap City, Montana
About this file
This is an Invitation for Bid (IFB) document from the Montana Department of Transportation (MDT) for the procurement of sanding material at two locations in the Kalispell area. The solicitation was opened on May 18, 2026, at 2:00 PM MDT with a bid closing date of June 8, 2026, at 2:00 PM MDT. The IFB number is MDT-316506-MS. Bidders have the option to submit proposals using either of two measurement units: Option #1 requires 4,500 tons of sanding material with one lump sum mobilization fee, or Option #2 requires 3,000 cubic yards of sanding material with one lump sum mobilization fee. Quantities are identified as estimated. No site visits, bidders' conferences, or award dates are specified in the document. The contract term is not explicitly stated.
Pricing is submitted in US dollars with payment terms of Net 30 with 0% discount. Bids totaling $150,000 or greater must be accompanied by bid security equal to 10% of the total bid amount, with failure to submit resulting in automatic disqualification. The solicitation requires bidders to comply with Montana state contract terms and conditions, MDT-specific terms and conditions, Single Point of Contact requirements, and verification of nondiscrimination against firearm entities as required by Montana Code Annotated 30-20-301. Potential bidders must access the eMACS system to submit questions through the Q&A Board, review specifications, and submit bids. The primary contact for the solicitation is Michele Smith at mismith@mt.gov or (406) 444-6033. No incumbent information, set-asides, or specific funding sources are identified in the document.
View the file
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
18 May 2026
Sanding Material 2 Locations Kalispell Area Sanding Material 2 Locations Kalispell Area
18 May 2026
Open 5/18/2026 2:00 PM MDT Type Invitation For Bid Close 6/8/2026 2:00 PM MDT Number MDT-316506-MS Currency US Dollar
Sealed Until 6/8/2026 2:00 PM MDT
Payment Terms 0% 0, Net 30
18 May 2026
Contacts Michele Smith mismith@mt.gov
Phone +1 406-444-6033
18 May 2026
Commodity Codes Commodity Code Description 5027 Transportation Goods & Services - Sanding Material/Chips
18 May 202618 May 202618 May 202618 May 202618 May 202618 May 202618 May 202618 May 202618 May 2026 mailto:mismith@mt.gov
The Montana Department of Transportation (MDT) is accepting bids for Sanding Material 2 Locations Kalispell Area.
Additional details regarding the solicitation can be viewed by logging into eMACS and reviewing the requirements of this solicitation.
Questions or information relating to either specifications or requirements of this solicitation must be asked through the eMACS Q&A Board. Potential bidders must log into eMACS to submit a question on the Q&A Board.
For general assistance with eMACS contact the eMACS Help Desk at emacs@mt.gov or (406) 444-2575. For assistance with vendor registration or responding to events please refer to the eMACS Resources website: https://spb.mt.gov/eMACS-Resources
Be sure to certify and submit your response once completed.
Description mailto:emacs@mt.gov https://spb.mt.gov/eMACS-Resources
Required to View Event
Prerequisites Required to Enter Bid
18 May 2026
1. Please read and agree to comply with Single Point of Contact requirement.
2. Please review and accept the IFB General Information.
3.
Please review and accept the State of Montana contract State Terms and Conditions identified herein.
Bidders requesting additions or exceptions to the State Terms and Conditions must submit them to the procurement officer by the Q&A deadline. The State reserves the right to address nonmaterial requests for exceptions to the State Terms and Conditions and contract language with the lowest bidder during contract negotiation.
4. Please read and agree to comply with MDT Terms and Conditions.
5. Please review any and all question and answer entries for this solicitation by clicking on the Q&A Board and viewing each question and answer.
18 May 202618 May 202618 May 202618 May 202618 May 202618 May 202618 May 2026
Buyer Attachments
1. Kalispell 2 Locations Sanding Material Specifications
18 May 202618 May 202618 May 202618 May 202618 May 202618 May 2026 https://bids01.jaggaer.com/apps/Router/PublicEventDownload?file=U291cmNpbmdldmVudC8xMzkxMTAzLTIwMjczMDk0MDFCaWQgRG9jdW1lbnQgKEV4aGlpdCBBKS5kb2N4&auth=MDpBRVMyI0NQNVp4a2IvSnkxZDNIUm81TGpka2h4M0V4bkpBZDlVSkVFUnk5WnZrK2l5eGZjOVRGNkRHUlU9
Questions Required Questions
Group 1: General Instructions:
1.1 If you wish to receive a copy of the bid tab sheet; please provide your email address.
Group 2: Bid Security Instructions:
2.1 Is your total bid $150,000 or greater?
2.2
Each bid/proposal with a total cost of $150,000 or greater must be accompanied by a bid proposal security based upon 10% of the total bid/offer. Bidders must upload and submit Bid Security, as described in Prerequisites, with their bid submission. Failure to submit Bid Security will automatically disqualify the bidder's bid from further consideration.
Group 3: Verification of Nondiscrimination Against Firearms Entities/Trade Associations.
Instructions:
Offeror’s certification is made in compliance with and in reference to 30-20-301, MCA and the terms defined therein. If Offeror determines the provisions of 30-20-301, MCA do not apply to Offeror or the contract to be awarded under this RFP, Offeror shall submit a statement setting forth in detail the basis for such determination.
3.1
Offeror does not have a practice, policy, guidance, or directive that discriminates against a firearm entity or firearm trade association during the term of any contract it is awarded under this solicitation; and b. Offeror will not discriminate against a firearm entity or firearm trade association during the term of any contract it is awarded as a result of this solicitation.
3.2 The Contractor determines the provisions of 30-20-301, MCA do not apply to the contract, the Contractor shall submit a statement setting forth in detail the basis for such determination.
3.3 Please confirm whether you are a governmental entity, are not a “company” that exists to make a profit or are a company with fewer than 10 full-time employees.
18 May 202618 May 202618 May 202618 May 202618 May 2026
Product Line Items Product Line Items
1. OPTION #1 - TONS
# Item Name, Commodity Code, Description Allow
Alternates Qty. UOM Requested Delivery
P1 Mobilization 1 LS - Lump Sum
P2 Sanding Material 4,500 TN - Ton
Quantities are estimated
2. OPTION #2 - CUBIC YARDS
# Item Name, Commodity Code, Description Allow
Alternates Qty. UOM Requested Delivery
P1 Mobilization 1 LS - Lump Sum
P2 Sanding Material 3,000 CY - Cubic Yard
Quantities are estimated
18 May 202618 May 202618 May 202618 May 2026
Service Line Items Service Line Items
There are no Items added to this event.
18 May 202618 May 202618 May 2026
File details come from the government source that posted it. Updated .