1390696-event.pdf

13 May 2026

Sheet Roller Bakery Sheeter

13 May 2026

Open 5/13/2026 4:00 PM CDT Type RFB - Request for Bids Close 5/27/2026 4:00 PM CDT Number 246-RFB-2773-2026 Currency US Dollar

Sealed Until 5/27/2026 4:00 PM CDT

Contacts Shelly Masterson shelly.masterson@iowa.gov

Phone +1 319-385-6806

Commodity Codes Commodity Code Description

16500 CAFETERIA AND KITCHEN EQUIPMENT, COMMERCIAL

9000 BAKERY EQUIPMENT, COMMERCIAL

13 May 202613 May 202613 May 202613 May 202613 May 202613 May 202613 May 202613 May 202613 May 2026 mailto:shelly.masterson@iowa.gov

Mount Pleasant Correctional Facility is requesting pricing on an ACME (or equivalent) RS88 Rol-Sheeter with 3' table. The sheeter must have a 24" roller width. The sheeter must have a 3' long and 24" wide conveyor table. Automatic shut-off across rollers. Rear safety switch, saddle/molding attachment. Two curling chains. Variable speed control. Please include shipping to 1200 E Washington Street Mount Pleasant IA 52641.

The purpose of this Request for Bids (RFB) is to solicit bids from qualified providers to provide the goods and/or services described further in this RFB to the Lead Agency and any Participating Agencies. The Lead Agency intends to award a contract(s) beginning and ending on the dates listed in the solicitation, and the Lead Agency may extend the contract(s) for up to the number of annual extensions identified in the solicitation at the sole discretion of the Lead Agency. Any contract(s) resulting from the RFB shall not be an exclusive contract.

This RFB is designed to provide Bidders with the information necessary for the preparation of competitive Bids. The RFB process is for the Lead Agency’s and Participating Agencies’ benefit and is intended to provide the Lead Agency with competitive information to assist in the selection process. It is not intended to be comprehensive. Each Bidder is responsible for determining all factors necessary for the submission of a comprehensive Bid.

It is advised to "Save Progress" often and especially after uploading documents.

NOTE: Anytime the Bidder opens their bid after the initial submission, they MUST certify and resubmit. No information will be lost from the initial submission.

NOTE: Bidder must approve and resubmit their bid after an amendment has been posted by the Issuing Officer. If the bid was submitted before the amendment, all information will be saved. The Bidder only needs to read and acknowledge the amendment.

Instructions for Amendments: Answer the newly posted question in the Questions Section, and CERTIFY and SUBMIT your bid again (if previously submitted).

Description

Required to View Event

Prerequisites Required to Enter Bid

13 May 2026

1. Bidder shall read and make certifications of the their Bid.

2. Bidder shall read and authorize to release information for their Bid.

13 May 202613 May 202613 May 202613 May 202613 May 202613 May 202613 May 2026

Buyer Attachments There are no Buyer Attachments added to this event.

13 May 202613 May 202613 May 202613 May 202613 May 202613 May 2026

Questions Required Questions

Group 1: Form of Bid

Instructions: Bidder shall read and answer the following questions. If there are exceptions to the terms, submit a question(s) in the Question and Answer Section with your exception.

1.1 Enter the Bidder's contact name, telephone number, and email address for questions regarding this solicitation.

1.2 Enter the Bidder's State or Foreign Country of Residence.

1.3 Enter the number of years the Bidder has been in business in the text box.

1.4 Enter the number of years of experience the Bidder has with providing the types of goods and/or services sought by the solicitation.

1.5 Bidder shall read, fill-out and upload the Terminations, Litigation, Debarment document.

1.6 The State of Iowa requires shipping to be FOB Destination, Freight Prepaid. Does the Bidder agree to the terms?

Group 2: Terms and Conditions

Instructions: Bidder shall read and answer the following questions. If there are exceptions to the terms, submit a question(s) in the Question and Answer Section with your exception.

2.1 Bidder shall read the RFB Definitions and enter a response.

2.2 Bidder shall read the Administrative Terms and enter a response.

2.3 Bidder shall read the Specification Terms and enter a response.

2.4 Bidder shall read the Terms and Conditions for GOODS and enter a response.

Group 3: Payment Terms

Instructions: Bidder shall read and answer the following questions. If there are exceptions to the terms, submit a question(s) in the Question and Answer Section with your exception.

3.1 Payment Terms - Per Iowa Code § 8A.514 the State of Iowa is allowed sixty (60) days to pay an invoice submitted by a Bidder. Does the Bidder agree to the terms?

3.2 What discount will the Bidder give for payment in 30 days? Enter the discount in the text box. If none, enter zero.

3.3 Terms of Pcard Acceptance - The State of Iowa prefers to pay Bidders using its Purchasing Card Program (Pcard) whenever possible. Bidders accepting Pcard payments shall comply with the Terms of Pcard Acceptance.

Group 4: Security

Instructions: Bidder shall read and answer the following questions. If there are exceptions to the terms, submit a question(s) in the Question and Answer Section with your exception.

Group 5: Bidder Conference

Instructions: Bidder shall read and answer the following questions. If there are exceptions to the terms, submit a question(s) in the Question and Answer Section with your exception.

13 May 202613 May 202613 May 202613 May 202613 May 2026

Product Line Items Product Line Items

1. Bid Specifications. Bidder must satisfy all the specifications to be deemed a Responsible Bidder # Item Name, Commodity Code, Description Allow

Alternates Qty. UOM Requested Delivery

P1 Sheeter 1 EA - Each 6/26/2026

Acme

P2 Shipping 1 EA - Each

Shipping to Mount Pleasant Correctional Facility

13 May 202613 May 202613 May 202613 May 2026

Service Line Items Service Line Items

There are no Items added to this event.

13 May 202613 May 202613 May 2026