1390306-event.pdf

PDF 268 KB Posted

Attached to
Sanding Material 1B-Location Bozeman Area
Solicitation number
MDT-316497-KB
Issued by
Gallatin County, Montana

About this file

This is an Invitation for Bid (IFB) document issued by the Montana Department of Transportation (MDT) for sanding material procurement in the Bozeman Area. The solicitation seeks bids for mobilization and sanding material delivery, with bidders offered two options: Option #1 requires 3,000 tons of sanding material plus one lump sum mobilization fee, while Option #2 requires 2,000 cubic yards of sanding material plus one lump sum mobilization fee. The IFB opened on May 18, 2026, at 2:00 PM MDT and closes on June 8, 2026, at 2:00 PM MDT. Sealed bids will be accepted until the closure deadline. Quantities listed are estimated, and all bidders must review the attached Bozeman 1B-Location Sanding Material Specifications document for detailed requirements.

The contract is classified under commodity code 5027 (Transportation Goods & Services - Sanding Material/Chips) and is valued in US dollars with payment terms of Net 30. Bids totaling $150,000 or greater require bid security equal to 10% of the total bid amount; failure to submit required bid security will result in automatic disqualification. All bidders must comply with Montana's Single Point of Contact requirement, review and accept the IFB General Information and State Terms and Conditions, acknowledge MDT Terms and Conditions, and review the Q&A Board. Questions must be submitted through the eMACS system, and bidders requesting exceptions to State Terms and Conditions must submit them to the procurement officer by the Q&A deadline. The procurement officer is Richele Parkhurst (rparkhurst@mt.gov, 406-546-8243), and the solicitation number is MDT-316497-KB.

View the file

Other files

File Type Posted
Bozeman 1B-Location Sanding Material Specifications.docx DOCX document

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file

Text version

18 May 2026

Sanding Material 1B-Location Bozeman Area Sanding Material 1B-Location Bozeman Area

18 May 2026

Open 5/18/2026 2:00 PM MDT Type Invitation For Bid Close 6/8/2026 2:00 PM MDT Number MDT-316497-KB Currency US Dollar

Sealed Until 6/8/2026 2:00 PM MDT

Payment Terms 0% 0, Net 30

18 May 2026

Contacts Richele Parkhurst rparkhurst@mt.gov

Phone +1 406-546-8243

18 May 2026

Commodity Codes Commodity Code Description 5027 Transportation Goods & Services - Sanding Material/Chips

18 May 202618 May 202618 May 202618 May 202618 May 202618 May 202618 May 202618 May 202618 May 2026 mailto:rparkhurst@mt.gov

The Montana Department of Transportation (MDT) is accepting bids for Sanding Material 1B-Location Bozeman Area.

Additional details regarding the solicitation can be viewed by logging into eMACS and reviewing the requirements of this solicitation.

Questions or information relating to either specifications or requirements of this solicitation must be asked through the eMACS Q&A Board. Potential bidders must log into eMACS to submit a question on the Q&A Board.

For general assistance with eMACS contact the eMACS Help Desk at emacs@mt.gov or (406) 444-2575. For assistance with vendor registration or responding to events please refer to the eMACS Resources website: https://spb.mt.gov/eMACS-Resources

Be sure to certify and submit your response once completed.

Description mailto:emacs@mt.gov https://spb.mt.gov/eMACS-Resources

Required to View Event

Prerequisites Required to Enter Bid

18 May 2026

1. Please read and agree to comply with Single Point of Contact requirement.

2. Please review and accept the IFB General Information.

3.

Please review and accept the State of Montana contract State Terms and Conditions identified herein.

Bidders requesting additions or exceptions to the State Terms and Conditions must submit them to the procurement officer by the Q&A deadline. The State reserves the right to address nonmaterial requests for exceptions to the State Terms and Conditions and contract language with the lowest bidder during contract negotiation.

4. Please read and agree to comply with MDT Terms and Conditions.

5. Please review any and all question and answer entries for this solicitation by clicking on the Q&A Board and viewing each question and answer.

18 May 202618 May 202618 May 202618 May 202618 May 202618 May 202618 May 2026

Buyer Attachments

1. Bozeman 1B-Location Sanding Material Specifications

18 May 202618 May 202618 May 202618 May 202618 May 202618 May 2026 https://bids01.jaggaer.com/apps/Router/PublicEventDownload?file=U291cmNpbmdldmVudC8xMzkwMzA2LTIwMjY4NDgyNzdCaWQgRG9jdW1lbnQuZG9jeA%3D%3D&auth=MDpBRVMyI0NQNVp4a2IvSnkxZDNIUm81TGpka2h4M0V4bkpBZDlVSkVFUnk5WnZrK2l5eGZjOVRGNkRHUlU9

Questions Required Questions

Group 1: General Instructions:

1.1 If you wish to receive a copy of the bid tab sheet; please provide your email address.

Group 2: Bid Security Instructions:

2.1 Is your total bid $150,000 or greater?

2.2

Each bid/proposal with a total cost of $150,000 or greater must be accompanied by a bid proposal security based upon 10% of the total bid/offer. Bidders must upload and submit Bid Security, as described in Prerequisites, with their bid submission. Failure to submit Bid Security will automatically disqualify the bidder's bid from further consideration.

Group 3: Verification of Nondiscrimination Against Firearms Entities/Trade Associations.

Instructions:

Offeror’s certification is made in compliance with and in reference to 30-20-301, MCA and the terms defined therein. If Offeror determines the provisions of 30-20-301, MCA do not apply to Offeror or the contract to be awarded under this RFP, Offeror shall submit a statement setting forth in detail the basis for such determination.

3.1

Offeror does not have a practice, policy, guidance, or directive that discriminates against a firearm entity or firearm trade association during the term of any contract it is awarded under this solicitation; and b. Offeror will not discriminate against a firearm entity or firearm trade association during the term of any contract it is awarded as a result of this solicitation.

3.2 Please confirm whether you are a governmental entity, are not a “company” that exists to make a profit or are a company with fewer than 10 full-time employees.

3.3 The Contractor determines the provisions of 30-20-301, MCA do not apply to the contract, the Contractor shall submit a statement setting forth in detail the basis for such determination.

18 May 202618 May 202618 May 202618 May 202618 May 2026

Product Line Items Product Line Items

1. OPTION #1 - TONS

# Item Name, Commodity Code, Description Allow

Alternates Qty. UOM Requested Delivery

P1 Mobilization 1 LS - Lump Sum

P2 Sanding Material 3,000 TN - Ton

Quantities are estimated

2. OPTION #2 - CUBIC YARDS

# Item Name, Commodity Code, Description Allow

Alternates Qty. UOM Requested Delivery

P1 Mobilization 1 LS - Lump Sum

P2 Sanding Material 2,000 CY - Cubic Yard

Quantities are estimated

18 May 202618 May 202618 May 202618 May 2026

Service Line Items Service Line Items

There are no Items added to this event.

18 May 202618 May 202618 May 2026

File details come from the government source that posted it. Updated .