1390164-event.pdf
PDF 268 KB Posted
- Attached to
- Sanding Materials 2-Location Great Falls Area
- Solicitation number
- MDT-316490-RP
- Issued by
- Cascade County, Montana
About this file
This is an Invitation for Bid (IFB) document issued by the Montana Department of Transportation (MDT) for sanding materials at two locations in the Great Falls area. The solicitation seeks bids for mobilization and sanding material delivery, with bidders offered two purchasing options: Option #1 requests 12,500 tons of sanding material, while Option #2 requests 8,333 cubic yards of the same material. Both options include a one lump-sum mobilization fee. The IFB opened on May 18, 2026, at 2:00 PM MDT, with bids due by June 10, 2026, at 2:00 PM MDT. All bids must be submitted through the eMACS system, and potential bidders are directed to review the detailed specifications document titled "Great Falls 2-Locations Sanding Material Specifications" prior to submitting their responses. No site visit, bidders' conference, or specific award date is referenced in the solicitation.
Payment terms are established at Net 30 with 0% discount. Bid security is required for all proposals with a total cost of $150,000 or greater, set at 10 percent of the total bid amount, and failure to submit this security will result in automatic disqualification. Bidders must comply with Montana's Single Point of Contact requirements, state contract terms and conditions, and MDT-specific terms and conditions. Additionally, all offerors must certify compliance with Montana Code Annotated 30-20-301 regarding nondiscrimination against firearm entities and trade associations. The procurement officer can be contacted at rparkhurst@mt.gov or (406) 546-8243, and the eMACS Help Desk is available at emacs@mt.gov or (406) 444-2575 for technical assistance.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| Great Falls 2-Locations Sanding Material Specifications.docx | DOCX document |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
18 May 2026
Sanding Materials 2-Location Great Falls Area Sanding Material 2-Locations Great Falls Area
18 May 2026
Open 5/18/2026 2:00 PM MDT Type Invitation For Bid Close 6/10/2026 2:00 PM MDT Number MDT-316490-RP Currency US Dollar
Sealed Until 6/10/2026 2:00 PM MDT
Payment Terms 0% 0, Net 30
18 May 2026
Contacts Richele Parkhurst rparkhurst@mt.gov
Phone +1 406-546-8243
18 May 2026
Commodity Codes Commodity Code Description 5027 Transportation Goods & Services - Sanding Material/Chips
18 May 202618 May 202618 May 202618 May 202618 May 202618 May 202618 May 202618 May 202618 May 2026 mailto:rparkhurst@mt.gov
The Montana Department of Transportation (MDT) is accepting bids for Sanding Material 2-Locations Great Falls Area.
Additional details regarding the solicitation can be viewed by logging into eMACS and reviewing the requirements of this solicitation.
Questions or information relating to either specifications or requirements of this solicitation must be asked through the eMACS Q&A Board. Potential bidders must log into eMACS to submit a question on the Q&A Board.
For general assistance with eMACS contact the eMACS Help Desk at emacs@mt.gov or (406) 444-2575. For assistance with vendor registration or responding to events please refer to the eMACS Resources website: https://spb.mt.gov/eMACS-Resources
Be sure to certify and submit your response once completed.
Description mailto:emacs@mt.gov https://spb.mt.gov/eMACS-Resources
Required to View Event
Prerequisites Required to Enter Bid
18 May 2026
1. Please read and agree to comply with Single Point of Contact requirement.
2. Please review and accept the IFB General Information.
3.
Please review and accept the State of Montana contract State Terms and Conditions identified herein.
Bidders requesting additions or exceptions to the State Terms and Conditions must submit them to the procurement officer by the Q&A deadline. The State reserves the right to address nonmaterial requests for exceptions to the State Terms and Conditions and contract language with the lowest bidder during contract negotiation.
4. Please read and agree to comply with MDT Terms and Conditions.
5. Please review any and all question and answer entries for this solicitation by clicking on the Q&A Board and viewing each question and answer.
18 May 202618 May 202618 May 202618 May 202618 May 202618 May 202618 May 2026
Buyer Attachments
1. Great Falls 2-Locations Sanding Material Specifications
18 May 202618 May 202618 May 202618 May 202618 May 202618 May 2026 https://bids01.jaggaer.com/apps/Router/PublicEventDownload?file=U291cmNpbmdldmVudC8xMzkwMTY0LTIwMjUwNDkwMzJCaWQgRG9jdW1lbnQuZG9jeA%3D%3D&auth=MDpBRVMyI0NQNVp4a2IvSnkxZDNIUm81TGpka2h4M0V4bkpBZDlVSkVFUnk5WnZrK2l5eGZjOVRGNkRHUlU9
Questions Required Questions
Group 1: General Instructions:
1.1 If you wish to receive a copy of the bid tab sheet; please provide your email address.
Group 2: Bid Security Instructions:
2.1 Is your total bid $150,000 or greater?
2.2
Each bid/proposal with a total cost of $150,000 or greater must be accompanied by a bid proposal security based upon 10% of the total bid/offer. Bidders must upload and submit Bid Security, as described in Prerequisites, with their bid submission. Failure to submit Bid Security will automatically disqualify the bidder's bid from further consideration.
Group 3: Verification of Nondiscrimination Against Firearms Entities/Trade Associations.
Instructions:
Offeror’s certification is made in compliance with and in reference to 30-20-301, MCA and the terms defined therein. If Offeror determines the provisions of 30-20-301, MCA do not apply to Offeror or the contract to be awarded under this RFP, Offeror shall submit a statement setting forth in detail the basis for such determination.
3.1
Offeror does not have a practice, policy, guidance, or directive that discriminates against a firearm entity or firearm trade association during the term of any contract it is awarded under this solicitation; and b. Offeror will not discriminate against a firearm entity or firearm trade association during the term of any contract it is awarded as a result of this solicitation.
3.2 The Contractor determines the provisions of 30-20-301, MCA do not apply to the contract, the Contractor shall submit a statement setting forth in detail the basis for such determination.
3.3 Please confirm whether you are a governmental entity, are not a “company” that exists to make a profit or are a company with fewer than 10 full-time employees.
18 May 202618 May 202618 May 202618 May 202618 May 2026
Product Line Items Product Line Items
1. OPTION #1 - TONS
# Item Name, Commodity Code, Description Allow
Alternates Qty. UOM Requested Delivery
P1 Mobilization 1 LS - Lump Sum
P2 Sanding Material 12,500 TN - Ton
Quantities are estimated
2. OPTION #2 - CUBIC YARDS
# Item Name, Commodity Code, Description Allow
Alternates Qty. UOM Requested Delivery
P1 Mobilization 1 LS - Lump Sum
P2 Sanding Material 8,333 CY - Cubic Yard
Quantities are estimated
18 May 202618 May 202618 May 202618 May 2026
Service Line Items Service Line Items
There are no Items added to this event.
18 May 202618 May 202618 May 2026
File details come from the government source that posted it. Updated .