REQUIREMENTS DOCUMENT.pdf

REQUIREMENTS DOCUMENT

Title: 100 MP CMOS cameras for neutron imaging Requesting Lab: 682.03

BACKGROUND INFORMATION

Purpose/Objective: The neutron imaging program requires 3 high resolution (101.99 Megapixel array) CMOS cameras for the three detector systems in regular service. The CMOS cameras are commercial products under the brand name “ZWO ASI461MM Pro USB3.0 Cooled Monochrome Camera”. The large pixel array is required to provide sufficient field of view for high spatial resolution imaging.

SCOPE

The Contractor shall deliver a quantity of 3 ZWO ASI461MM Pro USB3.0 Cooled Monochrome Camera, inclusive of FOB Destination delivery and warranty.

MINIMUM REQUIREMENTS

The Contractor shall provide a system that meets all technical specifications identified below. All items must be new. Used or remanufactured equipment will not be considered for award.

Experimental, prototype, or custom items will not be considered. The use of “gray market” components are not authorized for sale in the U.S. by the Contractor is not acceptable. All line items shall be shipped in the original manufacturer’s packaging and include all original documentation and software, when applicable.

Line Item 0001:

Description: ZWO ASI461MM Pro USB3.0 Cooled Monochrome Camera Quantity: 3

A. Technical Specifications

a. Sensor IMX4611 3.4″ 44*33mm

b. Resolution 11656*8750

c. ADC 16bit

d. Read Noise 1.0e

e. Cooling Tempe 35℃

f. DDR3 Buffer 256MB

g. USB 3.0

h. FPS 3.77

i. Full Well 50300e

j. QE 91%

k. Pixel Size 3.76µm

DELIVERY TERMS

Delivery shall be F.O.B Destination and shall occur in accordance with the Contractor’s established commercial lead time estimated to be 2 weeks.

FOB Destination means: The contractor shall pack and mark the shipment in conformance with carrier requirements, deliver the shipment in good order and condition to the point of delivery specified in the purchase order, be responsible for any loss of and/or damage to the goods occurring before receipt and acceptance of the shipment by the consignee at the delivery point specified in the purchase order; and pay all charges to the specified point of delivery. The contractor shall deliver all Line Items to:

National Institute of Standards and Technology Shipping and Receiving 100 Bureau Drive, Building 301 Gaithersburg, MD 20899

INSPECTION & ACCEPTANCE

In addition to the inspection and acceptance terms articulated in 52.212-4, the Government reserves the right to perform such performance tests and evaluations as defined below to verify specified system performance. Such tests and evaluations, if performed, shall be conducted within the environment that the system is to be operated. The Contractor has the right to be present during the tests and evaluations, if performed, at the Contractor’s expense.

Performance Tests:

Confirm full field of view frame rate and dark current measurements comply with manufacturer’s specifications.

NIST may choose at its discretion to forego this part of acceptance testing.

A visual inspection of the equipment will be performed by the NIST SME to identify surface defects or any form of indication that any equipment was damaged during transport to NIST. The Government shall have sole discretion to require repair or replacement of damaged and/or nonconforming supplies at no cost to the Government. The Government at any time prior to acceptance shall reject the equipment due to defects and/or nonconformance. The vendor is responsible for latent defects discovered any time after final inspection. However, the extent of its liability shall be prorated over the useful life of the equipment.

Ownership of the equipment shall transfer to NIST upon acceptance by the Government.

The Government will test, inspect, and accept or reject the equipment within (insert working days it will take to inspect, accept or reject) of the receipt of the equipment unless otherwise indicated above. The Government reserves the right to conduct quality assurance testing to confirm that a given instrument(s) meets the manufacturer’s and/or the Government’s performance specifications. It is anticipated that the equipment will meet all manufacturer’s specifications and/or the Government’s performance specifications identified in the most recent operations and maintenance manual for each piece of equipment and/or in this document.

WARRANTY

The contractor shall warranty the entire system for a period of a minimum of one year from date of receipt of the equipment and shall be in accordance with terms in FAR 52.212-4. Warranty shall commence upon acceptance of the system by the Government.

PAYMENT

Advance payment is not authorized. The Contractor shall be paid, in accordance with Net 30-day payment terms, upon receipt and acceptance of a proper invoice, completion of the performance/acceptable testing as set forth herein by the TPOC and final acceptance by the Government.