1333ND25QNB640404 Minimum Specs.pdf

PDF 102 KB Posted

Attached to
Field-Programmable Gate Array (FPGA) Servo Controller
Solicitation number
1333ND25QNB640404
Issued by

About this file

This document is a Request for Quote (RFQ) No. 1333ND25QNB640404 specifying minimum requirements for a Field-Programmable Gate Array (FPGA) Servo Controller under Contract Line Item Number (CLIN) 0001. The required device must have advanced technical capabilities including a function generator with input and output from DC to 500 MHz, output voltage of +-5 V, a native PID controller with 4 channels and 16-bit DAC resolution, Pound-Drever-Hall type locking ability, and at least four BNC or SMA ports for input and output. Additional specifications include supporting an external 10 MHz reference signal, containing an integrated Spectrum Analyzer and Phasemeter, enabling four simultaneous digital instrument operations, providing a Graphical User Interface (GUI) for function control, and supporting LabVIEW programmability.

View the file

Other files

File Type Posted
1333ND25QNB640404 RFQ.pdf PDF

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file

Text version

RFQ NO. 1333ND25QNB640404 MINIMUM SPECIFICATIONS

Contract Line Item Number (CLIN) 0001 shall meet the following minimum requirements:

The Contractor shall provide one Field-Programmable Gate Array (FPGA) Servo Controller that meets the following minimum specifications:

a. Function generator with input and output from DC to 500 MHz

b. Output voltage of at least +-5 V

c. Native PID controller with minimum 4 channels, 16-bit DAC resolution, and programmable PID parameters

d. Native Pound-Drever-Hall type locking ability

e. Minimum of four BNC or SMA type ports for both input and output

f. Allow for external 10 MHz reference signal in and out

g. Contain integrated Spectrum Analyzer and Phasemeter for signal analysis

h. Minimum of four simultaneously operating digital instruments

i. Graphical User Interface (GUI) for control of all specified functions

j. Shall support LabVIEW programmability.

File details come from the government source that posted it. Updated .