Amendment 1.pdf
PDF 143 KB Posted
- Attached to
- Optical Table
- Solicitation number
- 1333ND25QNB030101-1
About this file
This is Amendment 0001 to RFQ Number 1333ND25QNB030101-1 issued by the Department of Commerce National Institute of Standards and Technology (NIST) Office of Acquisition and Agreements Management. The amendment contains two questions and answers regarding the installation location and technical specifications for an optical table, along with an extension of the response deadline.
The amendment clarifies that the optical table will be installed in building 217, Lab C112, which is at street level approximately 200 feet from the main entrance, with no elevator requirement. It confirms that both passive tuned mass damping and active damping are required for the table. The response deadline has been extended to March 11, 2025, at 12:00 PM ET. All questions and quotations must be submitted via email to both the Contract Specialist and Contracting Officer to be considered.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| CSS Optical Table.pdf | ||
| Statement of Work.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Department of Commerce National Institutes of Standards and Technology Office of Acquisition and Agreements Management Acquisition Management Division 100 Bureau Drive
MS 1640
Gaithersburg, MD 20899
RFQ Number: 1333ND25QNB030101-1/Amendment 0001
Date: 2025 FEB 28
Amendment 0001 incorporates the following questions and answers, and also extends the response date for the solicitation as below:
1. Question: Provide the location of the laboratory. Building/room number and if there are elevators large enough to accommodate the table.
a. Answer: The table will be installed in building 217, Lab C112. The lab is street level and about 200 ft from the main entrance. No elevator will be required.
2. Question: Your specs call for passive tuned mass damping and active damping. We would like to make sure that the term "Active Damping" is being properly applied.
a. Answer: We require both passive tuned mass damping and active damping.
3. The response date for the solicitation has been extended to Tuesday, March 11, 2025, at 12:00 PM
ET.
Please direct any additional questions, and all quotations via e-mail to both Jenna Bortner, Contract Specialist at jenna.bortner@nist.gov, and Donald Collie, Contracting Officer, at Donald.collie@nist.gov. Responses must include the Contracting Officer to be considered.
[End of Amendment 0001] mailto:jenna.bortner@nist.gov mailto:Donald.collie@nist.gov
| RFQ Number: 1333ND25QNB030101-1/Amendment 0001 |
| 1. Question: Provide the location of the laboratory. Building/room number and if there are elevators large enough to accommodate the table. |
| a. Answer: The table will be installed in building 217, Lab C112. The lab is street level and about 200 ft from the main entrance. No elevator will be required. |
| 2. Question: Your specs call for passive tuned mass damping and active damping. We would like to make sure that the term "Active Damping" is being properly applied. |
| a. Answer: We require both passive tuned mass damping and active damping. |
File details come from the government source that posted it. Updated .