Sol_1333MF25Q0022.pdf

COMBINED SYNOPSIS/SOLICITATION

PURCHASE OF ON-SITE ANALYTICAL BALANCE AND MICROBALANCE CALIBRATION

SERVICES AT THE NOAA FISHERIES AUKE BAY LAB IN JUNEAU, ALASKA, AS SPECIFIED

IN THE ATTACHED STATEMENT OF WORK.

(i) This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice and in accordance with the simplified acquisition procedures authorized in FAR Part 13. This announcement constitutes the only solicitation; quotes are being requested and a written solicitation will not be issued.

(ii) This solicitation is issued as a request for quotation (RFQ). Submit written quotes on RFQ Number 1333MF25Q0022.

(iii) The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2025-03 (Jan 2025).

(iv) This solicitation is being issued as a total Small Business Set-Aside. The associated NAICS code is 811210. The small business size standard is $34.0M.

(v) This combined solicitation/synopsis is for purchase of the following commercial services:

CLIN 0001 – Base Period Services, non-personal, to provide all equipment, labor and materials (unless otherwise provided herein) for up to 40 analytical balance and microbalance calibration services on-site at the NOAA Fisheries, Alaska Fisheries Science Center, Auke Bay Laboratory located in Juneau, Alaska, in accordance with the attached statement of work. The Period of Performance is May 1, 2025 through April 30, 2026.

NO FUNDING WILL BE PROVIDED FOR THE OPTION PERIOD UNLESS THE OPTION PERIOD

IS EXERCISED BY A MODIFICATION TO THIS PURCHASE ORDER. NO WORK SHALL START

UNTIL NOTIFIED IN WRITING BY THE CONTRACTING

CLIN 1001 – Option Year 1 Services, non-personal, to provide all equipment, labor and materials (unless otherwise provided herein) for up to 40 analytical balance and microbalance calibration services on-site at the NOAA Fisheries, Alaska Fisheries Science Center, Auke Bay Laboratory located in Juneau, Alaska, in accordance with the attached statement of work. The Period of Performance is May 1, 2026 through April 30, 2027.

CLIN 2001 – Option Year 2 Services, non-personal, to provide all equipment, labor and materials (unless otherwise provided herein) for up to 40 analytical balance and microbalance calibration services on-site at the NOAA Fisheries, Alaska Fisheries Science Center, Auke Bay Laboratory located in Juneau, Alaska, in accordance with the attached statement of work. The Period of Performance is May 1, 2027 through April 30, 2028.

CLIN 3001 – Option Year 3 Services, non-personal, to provide all equipment, labor and materials (unless otherwise provided herein) for up to 40 analytical balance and microbalance calibration services on-site at the NOAA Fisheries, Alaska Fisheries Science Center, Auke Bay Laboratory located in Juneau, Alaska, in accordance with the attached statement of work. The Period of Performance is May 1, 2028 through April 30, 2029.

(vi) Description of requirements is as follows:

See attached Statement of Need which applies to Base Period and 3 Option Periods, and Department of Labor Wage Rates: WD 2015-5685, Revision No. 24, dated 12/23/2024, which can be found on: https://sam.gov/content/wage-determinations https://sam.gov/content/wage-determinations

INVOICES TO BE BILLED IN ARREARS. PROVIDE ANNUAL PRICING FOR THE BASE AND

EACH OPTION PERIOD. QUOTE PRICING MAY BE PROVIDED ON ATTACHED SF18 FORM OR

ON COMPANY LETTERHEAD.

(vii) Date(s) and place(s) of delivery and acceptance:

Base Year for a twelve month period May 1, 2025 through April 30, 2026 Option Period 1 for a twelve month period May 1, 2026 through April 30, 2027 Option Period 2 for a twelve month period May 1, 2027 through April 30, 2028 Option Period 3 for a twelve month period May 1, 2028 through April 30, 2029

Place of Performance is NOAA Fisheries, Alaska Fisheries Science Center, Ted Stevens Marine Research Institute (TSMRI) 17109 Point Lena Loop Road Juneau, AK 99801.

(viii) FAR provision 52.212-1, Instructions to Offerors-Commercial Products and Commercial Services (Sept 2023), applies to this acquisition and can be found on the Request for Quote form SF18 attachment.

(ix) FAR provision 52.212-2, Evaluation-Commercial Products and Commercial Services (Nov 2021), applies to this acquisition and can be found on the Request for Quote form SF18 attachment.

(x) FAR provision 52.212-3, Offeror Representations and Certifications-Commercial Products and Commercial Services (May 2024) (Deviation 20235-02) (Deviation 20235-03) (Feb 2025), applies to this acquisition and can be found on the Request for Quote form SF18 attachment. Offerors are advised to include a completed copy of the provision with its offer, unless the offeror’s Reps & Certs section on SAM.gov is accurate and current.

Per Deviation 2025-02/03: System updates may lag policy updates. The System for Award Management (SAM) may continue to require entities to complete representations based on provisions that are not included in agency solicitations, including 52.223-22, Public Disclosure of Greenhouse Gas Emissions and Reduction Goals—Representation, and paragraph (t) of 52.212-3, Offeror Representations and Certifications—Commercial Products and Commercial Services. Examples include 52.222-25, Affirmative Action Compliance, and paragraph (d) of 52.212-3, Offeror Representations and Certifications—Commercial Products and Commercial Services. Contracting officers will not consider these representations when making award decisions or enforce requirements. Entities are not required to, nor are they able to, update their entity registration to remove these representations in SAM.

(xi) FAR clause at 52.212-4, Contract Terms and Conditions-Commercial Products and Commercial Services (Nov 2023), applies to this acquisition and can be found on the Request for Quote form SF18 attachment.

(xii) FAR clause at 52.212-5, Contract Terms and Conditions Required To Implement Statutes or Executive Orders-Commercial Products and Commercial Services (Jan 2025) (Deviation 20235-02) (Deviation 20235-03) (Feb 2025), applies to this acquisition and can be found in full text on the Request for Quote form SF18 attachment.

(xiii) Any additional contract requirement(s) or terms and conditions that apply can be found on the Request for Quote form SF18 attachment.

(xiv) Defense Priorities and Allocations System (DPAS) and assigned rating does not apply.

(xv) Quotes are required to be received in the contracting office no later than 5:00PM EST/EDT on March 13, 2025. All quotes must be submitted electronically via email to christie.lang@noaa.gov and jason.jenks@noaa.gov.

https://www.acquisition.gov/far/part-52#FAR_52_212_1 https://www.acquisition.gov/far/part-52#FAR_52_212_2 https://www.acquisition.gov/far/part-52#FAR_52_212_3 https://www.acquisition.gov/far/part-52#FAR_52_212_4 https://www.acquisition.gov/far/part-52#FAR_52_212_5

(xvi) Any questions regarding this solicitation should be submitted electronically via email to christie.lang@noaa.gov and jason.jenks@noaa.gov.

UTILIZATION OF FEDCONNECT® FOR CONTRACT ADMINISTRATION

The Department of Commerce will utilize the FedConnect® web portal in administering this award. The contractor must be registered in FedConnect® and have access to the FedConnect® website located at https://www.fedconnect.net/Fedconnect/. For assistance in registering or for other FedConnect® questions please call the FedConnect® Help Desk at (800) 899-6665 or email at support@fedconnect.net.

There is no charge for registration in or use of FedConnect®.

(End)

1352.215-72 Inquiries (Apr 2010)

OFFERORS MUST SUBMIT ALL QUESTIONS CONCERNING THIS SOLICITATION IN WRITING

VIA EMAIL TO christie.lang@noaa.gov and jason.jenks@noaa.gov. QUESTIONS SHOULD BE RECEIVED NO LATER THAN 5:00PM EST/EDT on March 7, 2025. Any responses to questions will be made in writing, without identification of the questioner, and will be included in an amendment to the solicitation. Even if provided in other form, only the question responses included in the amendment to the solicitation will govern performance of the contract.

(End of clause)

52.237-1 Site Visit (Apr 1984) Offerors or quoters are urged and expected to inspect the site where services are to be performed and to satisfy themselves regarding all general and local conditions that may affect the cost of contract performance, to the extent that the information is reasonably obtainable. In no event shall failure to inspect the site constitute grounds for a claim after contract award.

(End of provision)

A site visit is highly recommended but not required. Offerors are urged and expected to inspect the site where services are to be performed and to satisfy themselves regarding all general and local conditions that may affect the cost of contract performance, to the extent that the information is reasonably obtainable. In no event shall failure to inspect the site constitute grounds for a claim after contract award.

Please contact christie.lang@noaa.gov and jason.jenks@noaa.gov to set up a time to visit the site. All questions during the site visit should be submitted electronically to christie.lang@noaa.gov and jason.jenks@noaa.gov.

FAR 52.212-1 Instructions to Offerors-Commercial Products and Commercial Services (Sep 2023) NOTICE TO OFFERORS: Instructions for submitting quotations under this request for quote must be followed. Failure to provide all information to aid in the evaluation may be considered non-responsive. Offers that are non-responsive may be excluded from further evaluation and rejected without further notification to the offeror.

1. Submit PDF or Microsoft Word format quotations to the office specified in this solicitation at or before the time specified in the solicitation. Email quotes are required and can be sent to christie.lang@noaa.gov and jason.jenks@noaa.gov.

2. Offeror shall have an active registration for All Awards in the System for Award Management (SAM found at https://sam.gov/content/home) in order to provide a quote and be eligible for award. Must provide their UEID/CAGE CODE with their quote.

3. Offerors shall assume that the Government has no prior knowledge of them or their capability.

4. Offerors must provide all evaluation criteria in accordance with FAR 52.212-2. Offerors who do not provide all evaluation criteria will not be accepted.

A. At a minimum the contractor shall provide the following information:

i. Point of contact name, telephone and E-mail address.

https://sam.gov/content/home

ii. SAM UEI Number

THE GOVERNMENT DOES NOT ACCEPT RESPONSIBILITY FOR NON-RECEIPT OF

QUOTES. IT IS THE CONTRACTOR’S RESPONSIBILITY TO REQUEST AND RECEIVE A

CONFIRMATION OF THE QUOTE RECEIPT.

FAR 52.212-2 Evaluation- Commercial Products and Commercial Services (Nov 2021) Offers will be evaluated based on price and the factors set forth in paragraph (a).

The evaluation will consider the Non-Price Technical Solution (Technical Approach and Past Performance) to be significantly more important than price. However, as quotes are determined to be more equal in the non-price evaluation factor, price becomes more important and may become the determining factor for award. If, at any stage of the evaluation, all vendors are determined to have submitted equal, or virtually equal, Non-Price Technical Solutions, price could become the factor in determining which vendor will receive the award.

The Government intends to evaluate the quotes and award a purchase order based on the Offeror’s initial quote; therefore, the Offeror’s initial quote should contain the Offeror’s best terms from a Non-Price Technical Solution and price standpoint.

The Government reserves the right not to award a purchase order depending on the quality of the quote(s) submitted and the availability of funds. Furthermore, the Government may waive informalities and minor irregularities or omissions in quotes received.

The Government may make award to other than the lowest-priced Offeror or the Offeror with the highest technical rating if the Contracting Officer determines that to do so would result in the best value to the Government. The Government will not make an award at a significantly higher overall price to achieve only slightly superior performance capability.

(a) The Government will award a contract resulting from this solicitation to the responsible offeror whose offer conforming to the solicitation will be most advantageous to the Government, price and other factors considered.

Paragraph (a) is hereby completed as follows: Evaluation will be based on the following:

1. Technical Approach and Capability.

The Offeror’s overall technical approach will be evaluated to assess the Government's level of confidence in the Offeror’s understanding of, approach to, and ability to successfully perform the requirements as described in the Statement of Work. Provide a detailed description of the company’s experience performing similar services. A detailed technical approach write-up describing how the Offeror will perform this service is required to be submitted with the quote regardless of whether a site visit was made or not. The technical approach write-up must not be a reiteration of the Statement of Work, but how your company plans on performing the tasks listed in the attached Statement of Work.

(i.e. performance checklists, anticipated number of employees, anticipated hours at the facility and/or confirmation of supplies being provided, etc.)

2. Past Performance.

Quote shall include at least two references from at least two separate contracts for similar and relevant recent services within the past two years including the name, phone number, full address, and e-mail address of the reference to demonstrate the offeror’s capability to successfully perform the services listed in the Statement of Work.

The Offeror's past performance on related contracts will be evaluated to determine, as appropriate, successful performance of contract requirements, quality and timeliness of delivery of goods and services, cost management, communications between contracting parties, proactive management and customer satisfaction. The Government will use its discretion to determine the sources of past performance information used in the evaluation, and the information may be obtained from references provided by the Offeror, the agency’s knowledge of Offeror performance, other government agencies or commercial entities, or past performance databases, and will be based on responsiveness, quality, and customer services.

Offerors lacking relevant past performance history, or for whom past performance information is either not available or has not been submitted to the Government, will receive a neutral rating for past performance. A good past performance rating provides higher confidence than a neutral or satisfactory rating.

3. Price.

The Government will evaluate the price quote for completeness and reasonableness in relation to the RFQ requirements. Quoted prices must be entirely compatible with the Non-Price Technical Solution.

4. Accreditation or Certification Quote shall include identification of Accredited or Certified Technicians specific for calibration of laboratory analytical balances and microbalances.

The Government intends to award a trade-off, single firm fixed-price purchase order on an all or none basis with payment terms of Net 30.

(b) Options. The Government will evaluate offers for award purposes by adding the total price for all options to the total price for the basic requirement. The Government may determine that an offer is unacceptable if the option prices are significantly unbalanced. Evaluation of options shall not obligate the Government to exercise the option(s).

(c) A written notice of award or acceptance of an offer, mailed or otherwise furnished to the successful offeror within the time for acceptance specified in the offer, shall result in a binding contract without further action by either party. Before the offer’s specified expiration time, the Government may accept an offer (or part of an offer), whether or not there are negotiations after its receipt, unless a written notice of withdrawal is received before award.

(End of provision)

1333MF25Q0022

1. REQUEST NO.

5a. ISSUED BY

NAME

a. NAME

c. STREET ADDRESS

d. CITY

10. PLEASE FURNISH QUOTATIONS TO

THE ISSUING OFFICE IN BLOCK 5a ON

OR BEFORE CLOSE OF BUSINESS (Date)

2. DATE ISSUED 3. REQUISITION/PURCHASE REQUEST NO. 4. CERT. FOR NAT. DEF.

UNDER BDSA REG. 2

AND/OR DMS REG.1

RATING

6. DELIVERY BY (Date)

7. DELIVERY

9. DESTINATION

a. NAME OF CONSIGNEE

b. STREET ADDRESS

PAGE OF PAGES

5b. FOR INFORMATION CALL: (No collect calls)

TELEPHONE NUMBER

AREA CODE NUMBER

8. TO:

b. COMPANY

e. STATE f. ZIP CODE

c. CITY

d. STATE e. ZIP CODE

IMPORTANT: This is a request for information, and quotations furnished are not offers. If you are unable to quote, please so indicate on this form and return it to the address in Block 5a. This request does not commit the Government to pay any costs incurred in the preparation of the submission of this quotation or to contract for supplies or services. Supplies are of domestic origin unless otherwise indicated by quoter. Any representations and/or certifications attached to this Request for Quotations must be completed by the quoter.

11. SCHEDULE (Include applicable Federal, State and local taxes)

THIS RFQ

REQUEST FOR QUOTATION

(THIS IS NOT AN ORDER)

IS IS NOT A SMALL BUSINESS SET ASIDEX

02/26/2025

1 50

601 EAST 12TH STREET SUITE 1746

KANSAS CITY MO 64106

NMFS Field Delegates

ALASKA FISHERIES SCIENCE CTR

7600 SAND POINT WAY NE

/F/AKC

SEATTLE

WA 98115-6349

206 526-6715CHRISTIE LANG

03/13/2025 1700 ED

FOB DESTINATION

OTHER

(See Schedule)X

ITEM NO.

(a)

SUPPLIES/SERVICES

(b)

QUANTITY

(c)

UNIT

(d)

UNIT PRICE

(e)

AMOUNT

(f)

Period of Performance: 05/01/2025 to 04/30/2026

Services, non-personal, to provide all equipment, labor and materials (unless otherwise provided herein) for up to 40 analytical balance and microbalance calibration services on-site at the NOAA Fisheries, Alaska Fisheries Science Center, Auke Bay Laboratory located in Juneau, Alaska, in accordance with the attached statement of work.

0001 Base Year On-site analytical Balance and microbalance calibration services at the Auke Bay Laboratories in Juneau, Alaska up to 40 balances/microbalances Product/Service Code: J066 Continued ...

12. DISCOUNT FOR PROMPT PAYMENT

a. 10 CALENDAR DAYS (%) b. 20 CALENDAR DAYS (%) c. 30 CALENDAR DAYS (%) d. CALENDAR DAYS

NUMBER PERCENTAGE

NOTE: Additional provisions and representations

13. NAME AND ADDRESS OF QUOTER

b. STREET ADDRESS

c. COUNTY

d. CITY e. STATE f. ZIP CODE

14. SIGNATURE OF PERSON AUTHORIZED TO

SIGN QUOTATION

16. SIGNER

a. NAME (Type or print)

c. TITLE (Type or print)

a. NAME OF QUOTER

AREA CODE

NUMBER

15. DATE OF QUOTATION

b. TELEPHONE are are not attached

AUTHORIZED FOR LOCAL REPRODUCTION

Previous edition not usable

STANDARD FORM 18 (REV. 6-95)

Prescribed by GSA - FAR (48 CFR) 53.215-1(a)

ITEM NO. SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

NAME OF OFFEROR OR CONTRACTOR

2 50

CONTINUATION SHEET

REFERENCE NO. OF DOCUMENT BEING CONTINUED PAGE OF

(A) (B) (C) (D) (E) (F)

1333MF25Q0022

NO FUNDING WILL BE PROVIDED FOR THE OPTION PERIOD

UNLESS THE OPTION PERIOD IS EXERCISED BY A

MODIFICATION TO THIS PURCHASE ORDER. NO WORK

SHALL START UNTIL NOTIFIED IN WRITING BY THE

CONTRACTING

1001 Option Year 1

On-site analytical Balance and microbalance calibration services at the Auke Bay Laboratories in Juneau, Alaska up to 40 balances/microbalances

(Option Line Item)

Product/Service Code: J066

Period of Performance: 05/01/2026 to 04/30/2027

2001 Option Year 2

On-site analytical Balance and microbalance calibration services at the Auke Bay Laboratories in Juneau, Alaska up to 40 balances/microbalances

(Option Line Item)

Product/Service Code: J066

Period of Performance: 05/01/2027 to 04/30/2028

3001 Option Year 3

On-site analytical Balance and microbalance calibration services at the Auke Bay Laboratories in Juneau, Alaska up to 40 balances/microbalances

(Option Line Item)

Product/Service Code: J066

Period of Performance: 05/01/2028 to 04/30/2029

NSN 7540-01-152-8067 OPTIONAL FORM 336 (4-86)

1333MF25Q0022 BASE

Section C - Description/Specifications Section I - Contract Clauses Section L - Instructions,Conditions, and Notices to Bidders

Section C - Description/Specifications

Statement of Work

National Oceanic and Atmospheric Administration (NOAA) National Marine Fisheries Service (NMFS) Auke Bay Laboratories (ABL) Lab balance calibration services

PR 143061-25-0042

Background The National Marine Fisheries Service (NMFS) conducts fisheries oceanographic research in the marine waters of Southeast Alaska, the Gulf of Alaska, and the Bering Sea in order to understand the influence of biophysical forcing and climate on the recruitment of marine fish including: the effects of ocean currents on transporting juvenile fish to nursery grounds; the effects of food availability on productivity of marine fish populations; aging and life history conditions for salmonids; and the energetic requirements for overwinter survival of marine fish.

The NMFS office, Auke Bay Labs, in Juneau, Alaska has a need for on-site, annual analytical balance calibration services to ensure that laboratory balances are in good working condition.

Tasks Under this award, the contractor shall provide annual analytical balance calibration services at the Auke Bay Labs, located in Juneau, Alaska. Specific tasks are listed below.

Key tasks include the following:

1. Provide onsite analytical balance maintenance & calibration services

a. Clean balance (usually only a light cleaning is required)

b. Service up to 40 analytical balances

2. List of balance make/models provided in Table 1, however this list may be amended as units are purchased or retired.

a. Repair (when necessary and possible)

3. Provide onsite microbalance calibration services

a. Service up to 2 microbalances

b. Repair (when necessary and possible)

Table 1.

Make Model # of units

AND SK-10KWP 1

Mettler AB54-S 1 Mettler AE100 1 Mettler AE50 1 Mettler PM2000 1

Mettler UMX5 (microbalance) 1 Mettler Xs32000L 1 Ohaus adventurer SL 3 Ohaus AR3130 2 Ohaus AS313 1 Ohaus AX124 5 Ohaus AX423/E 1 Ohaus E400 1 Ohaus T51XW 11 Phillips Scales Bench FG-60K 2 Radwag XA110.4Y 1 Sartorius BP310S 2 Sartorius CP124S 1 Sartorius CP224S 1 Sartorius CP3202S 1 Sartorius CP323S 1 Sartorius CP64 1 Sartorius CPA224S 2 Sartorius Cubis (microbalance) 1 Sartorius LA620S 1 Sartorius MC210S 1 Sartorius Quintix 3102-1S 2

Requirements -- Services will be performed on-site at the NOAA Fisheries Auke Bay Lab in Juneau, Alaska -- Vendor is to provide Accredited or Certified Technicians specific for calibration of laboratory analytical balances and microbalances -- The proposed Contractor shall provide documented past performance in servicing analytical and micro-balances including Ohaus, Sartorius, and Mettler brands

Deliverables -- Cleaned and calibrated analytical balances and microbalances, with a completed calibration certificate for each device.

-- Comprehensive test report for each balance serviced including needed repairs.

Government Furnished Resources The Contractor shall use Government furnished facilities, property, equipment and supplies only for the performance of work under this contract, and shall be responsible for returning all Government furnished facilities, property, and equipment in good working condition, subject to normal wear and tear.

The Government will provide to the Contractor the following equipment, supplies, and similar, necessary to conduct these services and anticipates facility and security access as follows:

Services Contractor will work primarily: X On-Site Off-Site Services Contractor requires access to NOAA facilities: X Required Services Contractor requires a PIV or CAC: X Not Required

Services Contractor requires a NOAA email address: X Not Required Services Contractor requires use of DOC-Owned IT equipment (laptop or desktop computer) X Not Required

Services Contractor requires non-Government IT equipment to connect to a DOC network: X Not Required

Services Contractor requires access to non-public DOC/NOAA data: X Not Required

Services Contractor will be provided on-site office space with incidental Government Property (desk, chair, phone, and other similar equipment that remains onsite, per FAR 45.000 (5)

X Not Provided

For Services Contractors doing laboratory work, the government will provide typical lab supplies and equipment for use:

X Not Provided

For Services Contractors doing field work, the Government will provide typical field equipment, gear, and supplies for use:

X Not Provided

Description of other access or equipment requirements not already addressed above:

Requirements The proposed Contractor shall provide documented past performance in servicing analytical and micro-balances including Ohaus, Sartorius, and Mettler brands. Additionally, certifications of the technicians shall be provided.

Period of Performance:

The base period is expected to be from May 1, 2025 through April 30, 2026. Exact dates of service will be agreed upon at the post award meeting.

Option 1 will be from May 1, 2026 through April 30, 2027.

Option 2 will be from May 1, 2027 through April 30, 2028.

Option 3 will be from May 1, 2028 through April 30, 2029.

Operational Hours: All service must be performed during normal operating hours of the facility, Monday through Friday, 8am – 5pm.

Place of Performance: On-Site at Auke Bay Labs located at 17109 Point Lena Loop Road, Juneau Alaska

Project Lead/Contracting Officer’s Representative: to be provided at time of award

Contractors invoice Per NAM 1330-52.232-71 electronic submission of payment requests (FEB 2023) The Contractor must submit payment requests electronically through the U.S. Department of the Treasury's Invoice Processing Platform System (IPP). The Contractor must use the IPP website to register, access, and submit payment requests. The IPP website address is https://www.ipp.gov.

"Payment request" means any request for contract financing payment or invoice payment to the Contractor. To be considered proper, invoices must be prepared in accordance with, and contain all elements specified in, the contract payment clause (e.g., FAR 52.212-4(g), FAR 52.232-25(a)(3), FAR https://www.ipp.gov/

52.232-26(a)(2), FAR 52.232-27(a)(2)).

The Contractor must include the following documents as attachments to payment requests submitted through the IPP: [Contracting Officer list required invoice attachment(s); none if left blank].

If the Contractor is unable to comply with the requirement to submit payment requests through the IPP due to a threat to national security; a matter of unusual or compelling urgency; or because the political, financial, or communications infrastructure of a foreign country does not support access to the IPP, the Contractor must request an exception in writing. Contact the Contracting Officer for more information about requesting an exception. (End of Clause)

Section I - Contract Clauses

FAR 52.212-3 Offeror Representations and Certifications-Commercial Products and Commercial Services

FAR 52.212-3 Offeror Representations and Certifications-Commercial Products and Commercial Services. (MAY 2024) (DEVIATION FEB 2025) The Offeror shall complete only paragraph (b) of this provision if the Offeror has completed the annual representations and certification electronically in the System for Award Management (SAM) accessed through https://www.sam.gov. If the Offeror has not completed the annual representations and certifications electronically, the Offeror shall complete only paragraphs (c) through (v) of this provision.

(a) Definitions. As used in this provision- Covered telecommunications equipment or services has the meaning provided in the clause 52.204-25, Prohibition on Contracting for Certain Telecommunications and Video Surveillance Services or Equipment.

Economically disadvantaged women-owned small business (EDWOSB) concern means a small business concern that is at least 51 percent directly and unconditionally owned by, and the management and daily business operations of which are controlled by, one or more women who are citizens of the United States and who are economically disadvantaged in accordance with 13 CFR part 127, and the concern is certified by SBA or an approved third-party certifier in accordance with 13 CFR 127.300. It automatically qualifies as a women-owned small business eligible under the WOSB Program.

Forced or indentured child labor means all work or service-

(1) Exacted from any person under the age of 18 under the menace of any penalty for its nonperformance and for which the worker does not offer himself voluntarily; or

(2) Performed by any person under the age of 18 pursuant to a contract the enforcement of which can be accomplished by process or penalties.

Highest-level owner means the entity that owns or controls an immediate owner of the offeror, or that owns or controls one or more entities that control an immediate owner of the offeror. No entity owns or exercises control of the highest level owner.

Immediate owner means an entity, other than the offeror, that has direct control of the offeror.

Indicators of control include, but are not limited to, one or more of the following: Ownership or interlocking management, identity of interests among family members, shared facilities and equipment, and the common use of employees.

Inverted domestic corporation means a foreign incorporated entity that meets the definition of an inverted domestic corporation under 6 U.S.C. 395(b), applied in accordance with the rules and definitions of 6 U.S.C. 395(c).

Manufactured end product means any end product in product and service codes (PSCs) 1000-9999, except-

(1) PSC 5510, Lumber and Related Basic Wood Materials;

(2) Product or Service Group (PSG) 87, Agricultural Supplies;

(3) PSG 88, Live Animals;

(4) PSG 89, Subsistence;

(5) PSC 9410, Crude Grades of Plant Materials;

(6) PSC 9430, Miscellaneous Crude Animal Products, Inedible;

(7) PSC 9440, Miscellaneous Crude Agricultural and Forestry Products;

(8) PSC 9610, Ores;

(9) PSC 9620, Minerals, Natural and Synthetic; and

(10) PSC 9630, Additive Metal Materials.

Place of manufacture means the place where an end product is assembled out of components, or otherwise made or processed from raw materials into the finished product that is to be provided to the Government. If a product is disassembled and reassembled, the place of reassembly is not the place of manufacture.

Predecessor means an entity that is replaced by a successor and includes any predecessors of the predecessor.

Reasonable inquiry has the meaning provided in the clause 52.204-25, Prohibition on Contracting for Certain Telecommunications and Video Surveillance Services or Equipment.

Restricted business operations means business operations in Sudan that include power production activities, mineral extraction activities, oil-related activities, or the production of military equipment, as those terms are defined in the Sudan Accountability and Divestment Act of 2007 (Pub. L. 110-174).

Restricted business operations do not include business operations that the person (as that term is defined in Section 2 of the Sudan Accountability and Divestment Act of 2007) conducting the business can demonstrate-

(1) Are conducted under contract directly and exclusively with the regional government of southern Sudan;

(2) Are conducted pursuant to specific authorization from the Office of Foreign Assets Control in the Department of the Treasury, or are expressly exempted under Federal law from the requirement to be conducted under such authorization;

(3) Consist of providing goods or services to marginalized populations of Sudan;

(4) Consist of providing goods or services to an internationally recognized peacekeeping force or humanitarian organization;

(5) Consist of providing goods or services that are used only to promote health or education; or

(6) Have been voluntarily suspended.

Sensitive technology

(1) Means hardware, software, telecommunications equipment, or any other technology that is to be used specifically-

(i) To restrict the free flow of unbiased information in Iran; or

(ii) To disrupt, monitor, or otherwise restrict speech of the people of Iran; and

(2) Does not include information or informational materials the export of which the President does not have the authority to regulate or prohibit pursuant to section 203(b)(3) of the International Emergency Economic Powers Act (50 U.S.C. 1702(b)(3)).

Service-disabled veteran-owned small business (SDVOSB) concern means a small business concern- (1)(i) Not less than 51 percent of which is owned and controlled by one or more service disabled veterans or, in the case of any publicly owned business, not less than 51 percent of the stock of which is owned by one or more service-disabled veterans; and

(ii) The management and daily business operations of which are controlled by one or more service-disabled veterans or, in the case of a service-disabled veteran with permanent and severe disability, the spouse or permanent caregiver of such veteran; or

(2) A small business concern eligible under the SDVOSB Program in accordance with 13 CFR part 128 (see subpart 19.14).

(3) Service-disabled veteran, as used in this definition, means a veteran as defined in 38 U.S.C. 101(2), with a disability that is service-connected, as defined in 38 U.S.C. 101(16), and who is registered in the Beneficiary Identification and Records Locator Subsystem, or successor system that is maintained by the Department of Veterans Affairs' Veterans Benefits Administration, as a service-disabled veteran.

Service-disabled veteran-owned small business (SDVOSB) concern eligible under the SDVOSB Program means an SDVOSB concern that-

(1) Effective January 1, 2024, is designated in the System for Award Management (SAM) as certified by the Small Business Administration (SBA) in accordance with 13 CFR 128.300; or

(2) Has represented that it is an SDVOSB concern in SAM and submitted a complete application for certification to SBA on or before December 31, 2023.

Service-disabled veteran-owned small business (SDVOSB) Program means a program that authorizes contracting officers to limit competition, including award on a sole-source basis, to SDVOSB concerns eligible under the SDVOSB Program.

Small business concern-(1) Means a concern, including its affiliates, that is independently owned and operated, not dominant in its field of operation, and qualified as a small business under the criteria in 13 CFR part 121 and size standards in this solicitation.

(2) Affiliates, as used in this definition, means business concerns, one of whom directly or indirectly controls or has the power to control the others, or a third party or parties control or have the power to control the others. In determining whether affiliation exists, consideration is given to all appropriate factors including common ownership, common management, and contractual relationships. SBA determines affiliation based on the factors set forth at 13 CFR 121.103.

Small disadvantaged business concern, consistent with 13 CFR 124.1001, means a small business concern under the size standard applicable to the acquisition, that-

(1) Is at least 51 percent unconditionally and directly owned (as defined at 13 CFR 124.105) by-

(i) One or more socially disadvantaged (as defined at 13 CFR 124.103) and economically disadvantaged (as defined at 13 CFR 124.104) individuals who are citizens of the United States; and

(ii) Each individual claiming economic disadvantage has a net worth not exceeding the threshold at 13 CFR 124.104(c)(2) after taking into account the applicable exclusions set forth at 13 CFR 124.104(c)(2);

and

(2) The management and daily business operations of which are controlled (as defined at 13.CFR 124.106) by individuals, who meet the criteria in paragraphs (1)(i) and (ii) of this definition.

Subsidiary means an entity in which more than 50 percent of the entity is owned-

(1) Directly by a parent corporation; or

(2) Through another subsidiary of a parent corporation.

Successor means an entity that has replaced a predecessor by acquiring the assets and carrying out the affairs of the predecessor under a new name (often through acquisition or merger). The term "successor" does not include new offices/divisions of the same company or a company that only changes its name. The extent of the responsibility of the successor for the liabilities of the predecessor may vary, depending on State law and specific circumstances.

Veteran-owned small business concern means a small business concern-

(1) Not less than 51 percent of which is owned and controlled by one or more veterans (as defined at 38 U.S.C. 101(2)) or, in the case of any publicly owned business, not less than 51 percent of the stock of which is owned by one or more veterans; and

(2) The management and daily business operations of which are controlled by one or more veterans.

Women-owned business concern means a concern which is at least 51 percent owned by one or more women; or in the case of any publicly owned business, at least 51 percent of its stock is owned by one or more women; and whose management and daily business operations are controlled by one or more women.

Women-owned small business concern means a small business concern-

(1) That is at least 51 percent owned by one or more women; or, in the case of any publicly owned business, at least 51 percent of the stock of which is owned by one or more women; and

(2) Whose management and daily business operations are controlled by one or more women.

Women-owned small business (WOSB) concern eligible under the WOSB Program (in accordance with 13 CFR part 127), means a small business concern that is at least 51 percent directly and unconditionally owned by, and the management and daily business operations of which are controlled by, one or more women who are citizens of the United States, and the concern is certified by SBA or an approved third-party certifier in accordance with 13 CFR 127.300.

(b)(1) Annual Representations and Certifications. Any changes provided by the Offeror in paragraph (b)(2) of this provision do not automatically change the representations and certifications in SAM.

(2) The offeror has completed the annual representations and certifications electronically in SAM accessed through http://www.sam.gov. After reviewing SAM information, the Offeror verifies by submission of this offer that the representations and certifications currently posted electronically at FAR 52.212-3, Offeror Representations and Certifications-Commercial Products and Commercial Services, have been entered or updated in the last 12 months, are current, accurate, complete, and applicable to this solicitation (including the business size standard(s) applicable to the NAICS code(s) referenced for this solicitation), at the time this offer is submitted and are incorporated in this offer by reference (see FAR 4.1201), except for paragraphs _________. [Offeror to identify the applicable paragraphs at (c) through (v) of this provision that the offeror has completed for the purposes of this solicitation only, if any. These amended representation(s) and/or certification(s) are also incorporated in this offer and are current, accurate, and complete as of the date of this offer. Any changes provided by the offeror are applicable to this solicitation only, and do not result in an update to the representations and certifications posted electronically on SAM.]

(c) Offerors must complete the following representations when the resulting contract is for supplies to be delivered or services to be performed in the United States or its outlying areas, or when the contracting officer has applied part 19 in accordance with 19.000(b)(1)(ii). Check all that apply.

(1) Small business concern. The offeror represents as part of its offer that

(i) It ___ is, ___ is not a small business concern; or

(ii) It ___ is, ___ is not a small business joint venture that complies with the requirements of 13 CFR 121.103(h) and 13 CFR 125.8(a) and (b). [The offeror shall enter the name and unique entity identifier of each party to the joint venture: _________.]

(2) Veteran-owned small business concern. [Complete only if the offeror represented itself as a small business concern in paragraph (c)(1) of this provision.] The offeror represents as part of its offer that it ___ is, ___ is not a veteran-owned small business concern.

(3) SDVOSB concern. [Complete only if the offeror represented itself as a veteran-owned small business concern in paragraph (c)(2) of this provision.] The offeror represents that it ___ is, ___ is not an SDVOSB concern.

(4) SDVOSB concern joint venture eligible under the SDVOSB Program. The offeror represents that it ___ is, ___ is not an SDVOSB joint venture eligible under the SDVOSB Program that complies with the requirements of 13 CFR 128.402. [Complete only if the offeror represented itself as an SDVOSB concern in paragraph (c)(3) of this provision.] [The offeror shall enter the name and unique entity identifier of each party to the joint venture:__.]

(5) Small disadvantaged business concern. (Complete only if the offeror represented itself as a small business concern in paragraph (c)(1) of this provision.) The offeror represents that it ___ is, ___ is not a small disadvantaged business concern as defined in 13 CFR 124.1001.

(6) Women-owned small business concern. (Complete only if the offeror represented itself as a small business concern in paragraph (c)(1) of this provision.) The offeror represents that it ___ is, ___ is not a women-owned small business concern.

(7) WOSB joint venture eligible under the WOSB Program. The offeror represents that it ___ is, ___ is not a joint venture that complies with the requirements of 13 CFR 127.506(a) through (c). [The offeror shall enter the name and unique entity identifier of each party to the joint venture: _______________.]

(8) Economically disadvantaged women-owned small business (EDWOSB) joint venture. The offeror represents that it ___ is, ___ is not a joint venture that complies with the requirements of 13 CFR 127.506(a) through (c). [The offeror shall enter the name and unique entity identifier of each party to the joint venture: _____________.] Note to paragraphs (c)(9) and (10): Complete paragraphs (c)(9) and (10) only if this solicitation is expected to exceed the simplified acquisition threshold.

(9) Women-owned business concern (other than small business concern). (Complete only if the offeror is a women-owned business concern and did not represent itself as a small business concern in paragraph (c)(1) of this provision.) The offeror represents that it ___ is, a women-owned business concern.

(10) Tie bid priority for labor surplus area concerns. If this is an invitation for bid, small business offerors may identify the labor surplus areas in which costs to be incurred on account of manufacturing or production (by offeror or first-tier subcontractors) amount to more than 50 percent of the contract price: _________________.

(11) HUBZone small business concern. [Complete only if the offeror represented itself as a small business concern in paragraph (c)(1) of this provision.] The offeror represents, as part of its offer, that-

(i) It ___ is, ___ is not a HUBZone small business concern listed, on the date of this representation, as having been certified by SBA as a HUBZone small business concern in the Dynamic Small Business Search and SAM, and will attempt to maintain an employment rate of HUBZone residents of 35 percent of its employees during performance of a HUBZone contract (see 13 CFR 126.200(e)(1)); and

(ii) It ___ is, ___ is not a HUBZone joint venture that complies with the requirements of 13 CFR 126.616(a) through (c). [The offeror shall enter the name and unique entity identifier of each party to the joint venture: _________.] Each HUBZone small business concern participating in the HUBZone joint venture shall provide representation of its HUBZone status.

(e) Certification Regarding Payments to Influence Federal Transactions (31 U.S.C. 1352). (Applies only if the contract is expected to exceed $150,000.) By submission of its offer, the offeror certifies to the best of its knowledge and belief that no Federal appropriated funds have been paid or will be paid to any person for influencing or attempting to influence an officer or employee of any agency, a Member of Congress, an officer or employee of Congress or an employee of a Member of Congress on his or her behalf in connection with the award of any resultant contract. If any registrants under the Lobbying Disclosure Act of 1995 have made a lobbying contact on behalf of the offeror with respect to this contract, the offeror shall complete and submit, with its offer, OMB Standard Form LLL, Disclosure of Lobbying Activities, to provide the name of the registrants. The offeror need not report regularly employed officers or employees of the offeror to whom payments of reasonable compensation were made.

(f) Buy American Certificate. (Applies only if the clause at Federal Acquisition Regulation (FAR) 52.225-1, Buy American-Supplies, is included in this solicitation.)

(1)(i) The Offeror certifies that each end product, except those listed in paragraph (f)(2) of this provision, is a domestic end product and that each domestic end product listed in paragraph (f)(3) of this provision contains a critical component.

(ii) The Offeror shall list as foreign end products those end products manufactured in the United States that do not qualify as domestic end products. For those foreign end products that do not consist wholly or predominantly of iron or steel or a combination of both, the Offeror shall also indicate whether these foreign end products exceed 55 percent domestic content, except for those that are COTS items. If the percentage of the domestic content is unknown, select "no".

(iii) The Offeror shall separately list the line item numbers of domestic end products that contain a critical component (see FAR 25.105).

(iv) The terms "commercially available off-the-shelf (COTS) item," "critical component," "domestic end product," "end product," "foreign end product," and "United States" are defined in the clause of this solicitation entitled "Buy American-Supplies."

(2) Foreign End Products: Line item No. Country of origin Exceeds 55% domestic content (yes/no) [List as necessary]

(3) Domestic end products containing a critical component:

Line Item No. ____________ [List as necessary]

(4) The Government will evaluate offers in accordance with the policies and procedures of FAR part 25.

(g)(1) Buy American-Free Trade Agreements-Israeli Trade Act Certificate. (Applies only if the clause at FAR 52.225-3, Buy American-Free Trade Agreements-Israeli Trade Act, is included in this solicitation.)

(i)(A) The Offeror certifies that each end product, except those listed in paragraph (g)(1)(ii) or (iii) of this provision, is a domestic end product and that each domestic end product listed in paragraph (g)(1)(iv) of this provision contains a critical component.

(B) The terms "Bahraini, Moroccan, Omani, Panamanian, or Peruvian end product," "commercially available off-the-shelf (COTS) item," "critical component," "domestic end product," "end product," "foreign end product," "Free Trade Agreement country," "Free Trade Agreement country end product," "Israeli end product," and "United States" are defined in the clause of this solicitation entitled "Buy American-Free Trade Agreements-Israeli Trade Act."

(ii) The Offeror certifies that the following supplies are Free Trade Agreement country end products (other than Bahraini, Moroccan, Omani, Panamanian, or Peruvian end products) or Israeli end products as defined in the clause of this solicitation entitled "Buy American-Free Trade Agreements-Israeli Trade Act." Free Trade Agreement Country End Products (Other than Bahraini, Moroccan, Omani, Panamanian, or Peruvian End Products) or Israeli End Products:

Line item No. Country of origin [List as necessary]

(iii) The Offeror shall list those supplies that are foreign end products (other than those listed in paragraph (g)(1)(ii) of this provision) as defined in the clause of this solicitation entitled "Buy American- Free Trade Agreements-Israeli Trade Act." The Offeror shall list as other foreign end products those end products manufactured in the United States that do not qualify as domestic end products. For those foreign end products that do not consist wholly or predominantly of iron or steel or a combination of both, the Offeror shall also indicate whether these foreign end products exceed 55 percent domestic content, except for those that are COTS items. If the percentage of the domestic content is unknown, select "no".

Other Foreign End Products: Line item No. Country of origin Exceeds 55% domestic content (yes/no) [List as necessary]

(iv) The Offeror shall list the line item numbers of domestic end products that contain a critical component (see FAR 25.105).

Line Item No. ____________ [List as necessary]

(v) The Government will evaluate offers in accordance with the policies and procedures of FAR part 25.

(2) Buy American-Free Trade Agreements-Israeli Trade Act Certificate, Alternate II. If Alternate II to the clause at FAR 52.225-3 is included in this solicitation, substitute the following paragraph (g)(1)(ii) for paragraph (g)(1)(ii) of the basic provision:

(g)(1)(ii) The offeror certifies that the following supplies are Israeli end products as defined in the clause of this solicitation entitled "Buy American-Free Trade Agreements-Israeli Trade Act":

Israeli End Products: Line item No.

[List as necessary]

(3) Buy American-Free Trade Agreements-Israeli Trade Act Certificate, Alternate III. If Alternate III to the clause at 52.225-3 is included in this solicitation, substitute the following paragraphs (g)(1)(i)(B) and (g)(1)(ii) for paragraphs (g)(1)(i)(B) and (g)(1)(ii) of the basic provision:

(g)(1)(i)(B) The terms "Korean end…