1305M219QNWWN0113(2).pdf

RFQ IFB RFP

WOMEN-OWNED SMALL BUSINESS

(WOSB) ELIGIBLE UNDER THE WOMEN-OWNED

SOLICITATION/CONTRACT/ORDER FOR COMMERCIAL ITEMS

OFFEROR TO COMPLETE BLOCKS 12, 17, 23, 24, & 30

1. REQUISITION NUMBER PAGE OF

2. CONTRACT NO. 3. AWARD/EFFECTIVE

DATE

4. ORDER NUMBER 5. SOLICITATION NUMBER 6. SOLICITATION ISSUE

DATE

7. FOR SOLICITATION

INFORMATION CALL:

a. NAME b. TELEPHONE NUMBER (No collect calls)

8. OFFER DUE DATE/

LOCAL TIME

9. ISSUED BY

13b. RATING

14. METHOD OF SOLICITATION

CODE

15. DELIVER TO 16. ADMINISTERED BY CODE

18a. PAYMENT WILL BE MADE BY CODEFACILITY

CODE

CODE

TELEPHONE NO.

17b. CHECK IF REMITTANCE IS DIFFERENT AND PUT SUCH ADDRESS IN

OFFER

18b. SUBMIT INVOICES TO ADDRESS SHOWN IN BLOCK 18a UNLESS BLOCK

BELOW IS CHECKED

SEE ADDENDUM

19.

ITEM NO.

20.

SCHEDULE OF SUPPLIES/SERVICES

21.

QUANTITY

22.

UNIT

23.

UNIT PRICE

24.

AMOUNT

(Use Reverse and/or Attach Additional Sheets as Necessary)

25. ACCOUNTING AND APPROPRIATION DATA 26. TOTAL AWARD AMOUNT (For Govt. Use Only)

28. CONTRACTOR IS REQUIRED TO SIGN THIS DOCUMENT AND RETURN

DELIVER ALL ITEMS SET FORTH OR OTHERWISE IDENTIFIED ABOVE AND ON ANY

ADDITIONAL SHEETS SUBJECT TO THE TERMS AND CONDITIONS SPECIFIED

29. AWARD OF CONTRACT: REF.

DATED . YOUR OFFER ON SOLICITATION

(BLOCK 5), INCLUDING ANY ADDITIONS OR CHANGES WHICH ARE

SET FORTH HEREIN, IS ACCEPTED AS TO ITEMS:

30a. SIGNATURE OF OFFEROR/CONTRACTOR

30b. NAME AND TITLE OF SIGNER (Type or print) 30c. DATE SIGNED

31a. UNITED STATES OF AMERICA (SIGNATURE OF CONTRACTING OFFICER)

31b. NAME OF CONTRACTING OFFICER (Type or print) 31c. DATE SIGNED

AUTHORIZED FOR LOCAL REPRODUCTION

PREVIOUS EDITION IS NOT USABLE

STANDARD FORM 1449 (REV. 2/2012)

Prescribed by GSA - FAR (48 CFR) 53.212

COPIES TO ISSUING OFFICE. CONTRACTOR AGREES TO FURNISH AND

OFFER

13a. THIS CONTRACT IS A

RATED ORDER UNDER

DPAS (15 CFR 700)

11. DELIVERY FOR FOB DESTINA-

TION UNLESS BLOCK IS

MARKED

SEE SCHEDULE

12. DISCOUNT TERMS

ARE ARE NOT ATTACHED

ARE ARE NOT ATTACHED

27a. SOLICITATION INCORPORATES BY REFERENCE FAR 52.212-1, 52.212-4. FAR 52.212-3 AND 52.212-5 ARE ATTACHED. ADDENDA

27b. CONTRACT/PURCHASE ORDER INCORPORATES BY REFERENCE FAR 52.212-4. FAR 52.212-5 IS ATTACHED. ADDENDA

17a CONTRACTOR/

OFFEROR.

CODE

8 (A)

SIZE STANDARD:

NAICS:

% FOR:SET ASIDE:UNRESTRICTED OR

SERVICE-DISABLED

VETERAN-OWNED

SMALL BUSINESS

HUBZONE SMALL

BUSINESS

SMALL BUSINESS

10. THIS ACQUISITION IS

EDWOSB

SMALL BUSINESS PROGRAM

STANDARD FORM 1449 (REV. 2/2012) BACK

19.

ITEM NO.

20.

SCHEDULE OF SUPPLIES/SERVICES

21.

QUANTITY

22.

UNIT

23.

UNIT PRICE

24.

AMOUNT

32a. QUANTITY IN COLUMN 21 HAS BEEN

RECEIVED INSPECTED ACCEPTED, AND CONFORMS TO THE CONTRACT, EXCEPT AS NOTED:

41a. I CERTIFY THIS ACCOUNT IS CORRECT AND PROPER FOR PAYMENT

32b. SIGNATURE OF AUTHORIZED GOVERNMENT

REPRESENTATIVE

32c. DATE

41b. SIGNATURE AND TITLE OF CERTIFYING OFFICER 41c. DATE

42a. RECEIVED BY (Print)

42b. RECEIVED AT (Location)

42c. DATE REC'D (YY/MM/DD) 42d. TOTAL CONTAINERS

40. PAID BY

32d. PRINTED NAME AND TITLE OF AUTHORIZED GOVERNMENT

REPRESENTATIVE

32e. MAILING ADDRESS OF AUTHORIZED GOVERNMENT REPRESENTATIVE 32f. TELPHONE NUMBER OF AUTHORZED GOVERNMENT REPRESENTATIVE

32g. E-MAIL OF AUTHORIZED GOVERNMENT REPRESENTATIVE

33. SHIP NUMBER 34. VOUCHER NUMBER 35. AMOUNT VERIFIED

CORRECT FOR

PARTIAL FINAL

37. CHECK NUMBER

38. S/R ACCOUNT NO. 39. S/R VOUCHER NUMBER

36. PAYMENT

COMPLETE PARTIAL FINAL

SCHEDULE Continued

ITEM NO. SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

BASE PERIOD

0001 PROVIDE GROUND MAINTENANCE FOR WFO

PITTSBURGH IN MOON TOWNSHIP, PA. IN

ACCORDANCE WITH THE ATTACHED STATEMENT

OF WORK, CURRENT WAGE DETERMINATION, AND

TERMS AND CONDITIONS.

$________ HOURLY RATE FOR ADDITIONAL WORK

NOT COVERED IN THE STATEMENT OF WORK.

CONTRACTING OFFICER APPROVAL AND

CONTRACT MODIFICATION REQUIRED.

Period of Performance: 05/13/2019 to 11/30/2019

7.00 EA

OPTION PERIOD ONE

OPT

0002 PROVIDE GROUND MAINTENANCE FOR WFO

PITTSBURGH IN MOON TOWNSHIP, PA. IN

ACCORDANCE WITH THE ATTACHED STATEMENT

OF WORK, CURRENT WAGE DETERMINATION, AND

TERMS AND CONDITIONS.

$________ HOURLY RATE FOR ADDITIONAL WORK

NOT COVERED IN THE STATEMENT OF WORK.

CONTRACTING OFFICER APPROVAL AND

CONTRACT MODIFICATION REQUIRED.

Period of Performance: 03/01/2020 to 11/30/2020

9.00 EA

OPTION PERIOD TWO

0003 PROVIDE GROUND MAINTENANCE FOR WFO

PITTSBURGH IN MOON TOWNSHIP, PA. IN

ACCORDANCE WITH THE ATTACHED STATEMENT

OF WORK, CURRENT WAGE DETERMINATION, AND

TERMS AND CONDITIONS.

$________ HOURLY RATE FOR ADDITIONAL WORK

NOT COVERED IN THE STATEMENT OF WORK.

CONTRACTING OFFICER APPROVAL AND

CONTRACT MODIFICATION REQUIRED.

Period of Performance: 03/01/2021 to 11/30/2021

OPTION PERIOD THREE

0004 PROVIDE GROUND MAINTENANCE FOR WFO

PITTSBURGH IN MOON TOWNSHIP, PA. IN

ACCORDANCE WITH THE ATTACHED STATEMENT

OF WORK, CURRENT WAGE DETERMINATION, AND

TERMS AND CONDITIONS.

$________ HOURLY RATE FOR ADDITIONAL WORK

NOT COVERED IN THE STATEMENT OF WORK.

CONTRACTING OFFICER APPROVAL AND

CONTRACT MODIFICATION REQUIRED.

Period of Performance: 03/01/2022 to 11/30/2022

OPTION PERIOD FOUR

0005 PROVIDE GROUND MAINTENANCE FOR WFO

PITTSBURGH IN MOON TOWNSHIP, PA. IN

ACCORDANCE WITH THE ATTACHED STATEMENT

PAGE 3 OF 49 1305M219QNWWN0113

SCHEDULE Continued

ITEM NO. SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

OF WORK, CURRENT WAGE DETERMINATION, AND

TERMS AND CONDITIONS.

$________ HOURLY RATE FOR ADDITIONAL WORK

NOT COVERED IN THE STATEMENT OF WORK.

CONTRACTING OFFICER APPROVAL AND

CONTRACT MODIFICATION REQUIRED.

Period of Performance: 03/01/2023 to 11/30/2023

PAGE 4 OF 49 1305M219QNWWN0113

Table of Contents

OFFEROR INSTRUCTIONS

1352.213-70 EVALUATION UTILIZING SAP

STATEMENT OF WORK

WAGE DETERMINATION

52.204-9 PERSONAL IDENTITY VERIFICATION OF CONTRACTOR PERSONNEL (JAN 2011)

52.212-1 INSTRUCTIONS TO OFFERORS--COMMERCIAL ITEMS (OCT 2018)

52.212-4 CONTRACT TERMS AND CONDITIONS--COMMERCIAL ITEMS (OCT 2018)

52.223-1 BIOBASED PRODUCT CERTIFICATION (MAY 2012)

52.223-2 AFFIRMATIVE PROCUREMENT OF BIOBASED PRODUCTS UNDER SERVICE AND CONSTRUCTION CONTRACTS (SEP

2013)

BIOBASED SPREADSHEET

52.223-3 HAZARDOUS MATERIAL IDENTIFICATION AND MATERIAL SAFETY DATA (JAN 1997)

52.223-5 POLLUTION PREVENTION AND RIGHT-TO-KNOW INFORMATION (MAY 2011)

52.223-10 WASTE REDUCTION PROGRAM (MAY 2011)

52.223-17 AFFIRMATIVE PROCUREMENT OF EPA-DESIGNATED ITEMS IN SERVICE AND CONSTRUCTION CONTRACTS (AUG

2018)

52.232-18 AVAILABILITY OF FUNDS (APR 1984)

52.232-40 PROVIDING ACCELERATED PAYMENTS TO SMALL BUSINESS SUBCONTRACTORS (DEC 2013)

52.237-1 SITE VISIT (APR 1984)

52.237-2 PROTECTION OF GOVERNMENT BUILDINGS, EQUIPMENT, AND VEGETATION (APR 1984)

1352.201-70 CONTRACTING OFFICER´s AUTHORITY (APR 2010)

1352.209-73 COMPLIANCE WITH THE LAWS (APR 2010)

1352.209-74 ORGANIZATIONAL CONFLICT OF INTEREST (APR 2010)

1352.233-71 GAO AND COURT OF FEDERAL CLAIMS PROTESTS (APR 2010)

1352.237-71 SECURITY PROCESSING REQUIREMENTS - LOW RISK CONTRACTS (APR 2010)

52.212-3 OFFEROR REPRESENTATIONS AND CERTIFICATIONS--COMMERCIAL ITEMS (OCT 2018)

52.212-5 CONTRACT TERMS AND CONDITIONS REQUIRED TO IMPLEMENT STATUTES OR EXECUTIVE ORDERS--COMMERCIAL

ITEMS (JAN 2019)

52.217-8 OPTION TO EXTEND SERVICES (NOV 1999)

52.217-9 OPTION TO EXTEND THE TERM OF THE CONTRACT (MAR 2000)

52.252-1 SOLICITATION PROVISIONS INCORPORATED BY REFERENCE (FEB 1998)

52.252-2 CLAUSES INCORPORATED BY REFERENCE (FEB 1998)

1352.228-70 INSURANCE COVERAGE (APR 2010)

1352.228-72 DEDUCTIBLES UNDER REQUIRED INSURANCE COVERAGE- FIXED PRICE (APR 2010)

1352.233-70 AGENCY PROTESTS (APR 2010)

1352.237-75 KEY PERSONNEL (APR 2010)

1352.246-70 PLACE OF ACCEPTANCE (APR 2010)

1352.270-70 PERIOD OF PERFORMANCE (APR 2010)

1330-52.222-70NOAA SEXUAL ASSAULT AND SEXUAL HARASSMENT PREVENTION AND RESPONSE POLICY (MAY 2018)... 44

1330-52.237-71NOAA GOVERNMENT-CONTRACTOR RELATIONS - NON-PERSONAL SERVICES CONTRACT (SEPT 2017)

1330-52.237-72CONTRACTOR ACCESS TO NOAA FACILITIES (SEPT 2017)

1330-52.243-70REQUESTS FOR EQUITABLE ADJUSTMENT (OCT 2017)

1330-52.270-304NOAA ACQUISITION AND GRANTS OFFICE OMBUDSMAN (OCT 2016)

PAGE 5 OF 49 1305M219QNWWN0113

CLAUSES

OFFEROR INSTRUCTIONS

PAGE 6 OF 49 1305M219QNWWN0113

OFFEROR INSTRUCTIONS

FAXED QUOTES WILL NOT BE ACCEPTED. QUOTES SHOULD BE E-MAILED TO

ELLIOTT.WAXMAN@NOAA.GOV

OR

MAILED TO THE BELOW ADDRESS:

NOAA/AGO/ERAD

ATTN: ELLIOTT WAXMAN

601 E 12TH STREET, ROOM 1734

KANSAS CITY MO 64106-2808

MAILED QUOTES MUST BE RECEIVED IN THIS OFFICE BY THE DUE DATE AND TIME TO BE

CONSIDERED WITHIN THE DEADLINE.

QUOTERS MUST SUBMIT ALL QUESTIONS CONCERNING THIS SOLICITATION BY E-MAIL

WITHIN 5 DAYS OF THE ISSUANCE OF THIS SOLICITATION.

A SITE VISIT IS STRONGLY ENCOURAGED. QUOTERS ARE STRONGLY ENCOURAGED TO

INSPECT THE SITE WHERE SERVICES ARE TO BE PERFORMED AND TO SATISFY

THEMSELVES AS TO ALL GENERAL AND LOCAL CONDITIONS THAT MAY AFFECT THE

COST OF THE PERFORMANCE OF THE CONTRACT TO THE EXTENT SUCH INFORMATION

IS REASONABLY OBTAINABLE. IN NO EVENT WILL A FAILURE TO INSPECT THE SITE

CONSTITUTE GROUNDS FOR A CLAIM AFTER AWARD OF THE CONTRACT. PLEASE

CONTACT TO SCHEDULE A SITE VISIT:

MICHELLE MURRELL

michelle.murrell@noaa.gov 412-262-1591

THIS IS A FIRM FIXED PRICE PURCHASE ORDER.

CONTRACTORS MUST BE REGISTERED IN THE SYSTEM FOR AWARD

MANAGEMENT TO SUBMIT A QUOTE. YOU MAY REGISTER AT

HTTPS://WWW.SAM.GOV/PORTAL/PUBLIC/SAM/. A DUNS NUMBER IS REQUIRED.

THERE IS NO CHARGE FOR REGISTERING IN SAM.

THE FOLLOWING INFORMATION IS TO BE RETURNED:

1) PAGE 1 (COMPLETE BLOCKS 17A, 30A, 30B, AND 30C).

2) PAGE 3 & 4 (FILL IN YOUR QUOTE/PRICES).

3) YOUR DUN & BRADSTREET (D&B) DUNS NUMBER. IF YOU DO NOT HAVE A DUNS

NUMBER, YOU MAY REQUEST ONE AT HTTP://FEDGOV.DNB.COM/WEBFORM THERE IS

NO CHARGE FOR GETTING A DUNS NUMBER.

4) CONTRACTOR REPRESENTATIONS AND CERTIFICATIONS SHALL BE COMPLETED IN

THE SYSTEM FOR AWARD MANAGEMENT WWW.SAM.GOV. CONTRACTORS SHALL

PROVIDE A STATEMENT THAT THEY EITHER ARE OR ARE NOT REGISTERED AND

ACTIVE IN SAM.

PAGE 7 OF 49 1305M219QNWWN0113

5) YOUR RESPONSE TO 1352.209-74(C), ORGANIZATIONAL CONFLICT OF INTEREST.

CONTRACTORS SHALL PROVIDE A STATEMENT THAT THEY EITHER DO OR DO NOT

HAVE A CONFLICT OF INTEREST.

6) AS REQUESTED IN 1352.237-75, PROVIDE YOUR KEY PERSONNEL

NAME, TITLE, AND TELEPHONE NUMBER.

7) AS REQUESTED IN 1352.213-70, PROVIDE YOUR RESPONSE TO THE FACTORS USED

TO EVALUATE QUOTES.

8) AS REQUESTED IN 1352.228-70, PROVIDE PROOF OF PROPERTY DAMAGE LIABILITY

INSURANCE IN THE AMOUNT OF $50,000.00

9) IN ACCORDANCE WITH THE STATEMENT OF WORK ON PAGE 15, SUBMIT A QUALITY

CONTROL PLAN.

10)AN E-MAIL ADDRESS AND TELEPHONE NUMBER WHERE YOU CAN BE REACHED FOR

FUTURE CORRESPONDENCE.

IF 1 THROUGH 10 ARE NOT RESPONDED TO, THE QUOTE MAY BE

CONSIDERED NON-COMPLIANT WITH THE REQUIREMENTS OF THE

SOLICITATION AND NO FURTHER CONSIDERATION SHALL BE GIVEN FOR

AWARD.

1352.213-70 EVALUATION UTILIZING SAP

PAGE 8 OF 49 1305M219QNWWN0113

1352.213-70 EVALUATION UTILIZING SIMPLIFIED ACQUISITION PROCEDURES

(APR 2010)

The Government will issue a purchase order resulting from this Request for Quotation (RFQ) to the responsible offeror whose quotation results in the best value to the Government, considering both price and non-price factors considered.

Evaluation will be made based on the lowest priced, technically acceptable quote received. The following factors will be used to evaluate quotations:

1) Technical Capabilities

(a) Provide information that demonstrates a level of applicable experience with ground maintenance contracts in accordance with the Statement of Work.

(b) Provide a statement that they do or do not agree that any portion of the work performed that fails the quality control inspection shall be remediated by the contractor at no additional cost to the Government.

(c) Contractors shall provide a statement that they acknowledge clause 1330-52.222-70, NOAA Sexual Assault and Sexual Harassment Prevention and Response Policy and agree to provide documentation of training (http://www.ago.noaa.gov/quicklinks/harassment_training.html) completion for all on-site employees to the Contracting Officer ten (10) business days prior to the start date.

2) Past Performance. The offeror's past performance on related contracts will be evaluated to determine, as appropriate, successful performance of contract requirements, quality and timeliness of delivery of goods and services, cost management, communications between contracting parties, proactive management and customer satisfaction.

The contractor shall provide a list of at least two but no more than three contacts, including phone numbers, of past performance references that you have successfully accomplished services similar to size and scope of those listed in the statement of work.

(3) Price. The Government will evaluate offers for award purposes by adding the total price for all options to the total price for the basic requirement. The Government may determine that an offer is unacceptable if the option prices are significantly unbalanced. Evaluation of options shall not obligate the Government to exercise the option(s).

(End of clause)

STATEMENT OF WORK

PAGE 9 OF 49 1305M219QNWWN0113

STATEMENT OF WORK

1. SCOPE OF WORK

A. Place of performance shall be as follows: National Weather Service, Forecast Office, 192

Shafer Road, Moon Township, PA 15108. The project site consists of approximately 9.7 acres, parts of which are occupied by buildings, roads, walkways, and other paved surfaces.

B. All work performed under this contract shall meet the quality and performance standards as identified. The Contractor shall provide all personnel, equipment, tools, material, supervision, and other items and services necessary to perform Grounds

Maintenance from May 1, 2019 to November 30, 2023. Work shall be in a manner that shall maintain healthy grass, shrubs, and plants, and present a neat and professional appearance.

C. It is the responsibility of the contractor to comply with all applicable state and federal laws governing the health and safety of its employees, including all regulations promulgated under the Occupational Safety and Health Act (OSHA). Such compliance shall include, but not be limited to, ensuring that all employees are properly trained for the work to be performed and have been supplied with all necessary protective and safety equipment. The Government, at its discretion, may request written safety plans or guidelines for its records.

D. If services cannot be performed due to adverse weather, the Contractor shall perform any and all scheduled services the next duty day with no degradation to existing scheduled services.

2. SUPPLIES, MATERIALS, EQUIPMENT, AND UTILITIES.

A. Government Furnished:

Electrical power shall be provided on grounds for the Contractor to operate such equipment, as necessary, in the performance of this contract.

B. Contractor Furnished:

i. The Contractor shall furnish all supplies, materials, and employee training necessary to achieve the quality performance standards of the work in this contract, unless otherwise specified herein.

a. Training shall include all applicable OSHA and other related standards.

The Contractor shall submit all Material Safety Data Sheets (MSDS) for any materials used under this contract containing dangerous or warning labels to the Government Contact Point (GCP) within ten (10) days after contract award date.

b. Furnish employees with appropriate Personal Protection Equipment to meet OSHA standard 1910.132(a) which states: Protective equipment, PAGE 10 OF 49 1305M219QNWWN0113 including personal protective equipment for eyes, face, head, and extremities, protective clothing, respiratory devices, and preotective shields and barriers, shall be provided, used, and maintained in a sanitary and reliable condition wherever it is necessary by reason of hazards of processes or environment, chemical hazards, radiological hazards, or mechanical irritants encountered in a manner capable of causing injury or impairment in the function of any part of the body through absorption, inhalation, or physical contact.

ii. The Contractor shall furnish all equipment necessary to accomplish the work under this contract. All equipment shall meet all applicable OSHA standards.

Contractor shall not use any unsafe equipment or any equipment in need of repair.

3. CONTRACTOR PERSONNEL

A. Within five days of the contract start date, the Contractor shall submit in writing, the name of the Site Manager and an alternate to the GCP. The Contractor shall supply telephone, cell phone, and/or pager numbers to the GCP for use in contacting the Site

Manager. The Site Manager shall conduct overall management coordination and shall be the central point of contact with the Government for performance of all work under this contract. The Site Manager shall be authorized to receive any notices of deficiency in contract performance. The notices may include, but not be limited to, the following:

non-performance of work, deficiencies in work performed, and notices of proposed payment deductions due to the above. This may be in the form of written and/or verbal communications. The Site Manager shall be available weekdays between the hours of

8:00am and 3:00pm, within twenty-four (24) hours to meet at the facility to discuss problems.

B. All personnel employed by the Contractor shall be experienced in the type of work involved and familiar with the specifications of this contract.

C. Contractor personnel shall conduct all operations in such a manner as to minimize any inconvenience in the use of the facilities to the occupants.

D. Contractor personnel shall wear all appropriate personal protection equipment as required by OSHA standards.

E. Contractors shall provide documentation of training completion for all on-site employees to the Contracting Officer ten (10) business days prior to the start date in accordance with 1330-52.222-70, NOAA Sexual Assault and Sexual Harassment

Prevention and Response Policy.

(http://www.ago.noaa.gov/quicklinks/harassment_training.html). Training shall be retaken and documentation shall be provided to the Contracting Officer within ten (10) business days prior to the start of each exercised option year.

4. SCHEDULING WORK AND REPORTING REQUIREMENTS

PAGE 11 OF 49 1305M219QNWWN0113

Within five (5) work days of the contract start date, and annually thereafter for option periods, the Contractor shall submit to the GCP, schedules and plans to accomplish required services throughout the year. If changes need to be made to reduce conflicts with Government operations, special events, or other occurrences, the Contractor shall meet with the GCP and revise the schedule as necessary. The GCP can request changes to the monthly work schedule so spacing of services is distributed to meet the needs of the Government. The Contract shall not deviate from this schedule without prior approval from the GCP.

5. SECURITY

A. The Contractor shall be responsible for the following security aspects of work performed under this contract.

i. Contractor’s Security Point of Contact

The contractor shall submit a point of contact for security related matters.

ii. Physical Security

The contractor shall safeguard all Government property provided for Contractor use. The Contractor shall maintain physical security management of all operational areas, equipment, data, forms, and products.

iii. The Contractor and/or employee(s) should sign in on the security log sheet when entering the property and should sign out when leaving the property.

PERFORMANCE STANDARDS AND GUIDELINE REQUIREMENTS

NOTE: All services provided under this contract are required to meet the quality and performance standards described herein.

1. The Contractor shall provide all labor, equipment, materials, supplies, and supervision to perform grounds maintenance and landscape services as identified in the Statement of Work.

A. The following guidelines describe what is considered to be the normal industry quality and performance standards for intended services under this type of contract.

B. The following guidelines are for references only and final results shall be the determining factor for the success of failure of this contract. Performance shall be based on the Contractor’s effort in meeting the performance and quality standards, not the frequency or method of performance.

i. Mowing and Trimming Operations: The Contractor shall be responsible for monitoring the growth of the grass and scheduling cutting/mowing operations

PAGE 12 OF 49 1305M219QNWWN0113

as required. The Contractor shall prevent scalping, uneven contractor operations. The Contractor shall replace shrubs and trees damaged during mowing operations. Precautions shall include removal or repair of equipment causing unnecessary damage or procedures causing unsatisfactory mowing. The

Government is not responsible for damage to contractor’s equipment due to trash, debris, or uneven terrain. Contractor shall maintain all open drainage systems; open culverts under driveways and roads free of debris, trash, limbs, leaves, and grass clippings. Grass shall be cut from May through October and maintained between 2” and 3” height. The frequency of mowing may vary depending on weather conditions. Grass and weeds shall be trimmed around trees, shrubs, buildings, fences, poles, posts, fire hydrants, paring lot bumper blocks, and other fixed obstacles. Trimming height shall match surrounding area grass height. Grass clippings shall be removed or mulched to provide a uniform appearance after mowing. All improved grounds shall look well manicured at all times. All areas shall be trimmed concurrent with mowing.

Damage to trees and shrubs from trimming caused by the Contractor shall be repaired by the Contractor at no additional cost to the Government. If a plant should ide or become unhealthy due to damage caused by the Contractor, the

Contractor shall be responsible for replacing the damaged plant or tree with a plant or tree of the same specifies and size. Plant or tree replacement shall occur within fifteen (15) days of noticed damage. It is the Contractor’s responsibility to ensure their trimming and mowing services does not damage trees. Sod shall be completely removed from around base of all trees in lawn area and twenty-four (24) inches away from edge of trunk to form an even circle around the tree. If grass seeding is needed to repair damaged areas, use a compatible grass seed mixture.

ii. Fertilize Grounds: The Contractor shall furnish and apply a slow release fertilizer in three (3) separate treatments; once in the spring, once in mid-summer, and once again in the fall.

iii. Over seed: In the spring of each year, the Contractor shall furnish and spread grass seed over the entire lawn. Seed shall be a mix that does well in northern

Maine’s climate and is weed free at a minimum of 2 lbs. per 1,000 sq. ft.

iv. Edging: Grass shall be cut back from all edges 0.5” or 1.5” and not cut deeper than1.5” to 2”. Edging shall include removal of vegetation from cracks, and expansion joints in sidewalks, driveways, stone landscaping, and curbs. Grass shall not extend over the edge of parking lots, concrete streets, pads, sidewalks, driveways, paved areas, or curbs in all areas. During the first year of this contract, edging shall be established around evergreen trees where the grass intersects the mulch bed. During the option years of this contract, this edging shall be maintained.

PAGE 13 OF 49 1305M219QNWWN0113

v. Weed Control: Lawns shall be maintained to show continual progress in removal of annual and perennial weeds, including all clover and coarse grass species.

Parking lots, plant beds, walkways, stone landscaping, and patio area shall be kept free of weeds, grasses, leaves, and debris. Planting beds shall be kept free of weeds, grasses, leaves, and debris. Sprays specific for problem vegetation are permitted.

vi. Lime Application: The Contractor shall furnish and apply pelletized lime once in the fall at a minimum rate of 40 lbs. per 1,000 sq. ft.

vii. Tree Pruning: Remove dead, damaged, or diseased wood from all trees (within

6 feet from the ground). This is a continuous requirement.

viii. Dark Mulching: During the month of May, the Contractor shall provide and place bark mulch around evergreen trees and plant beds. Quantities suppled must be sufficient to maintain planting bed areas with a minimum mulch depth of four (4) inches, and tree mounds with a minimum depth of six (6) inches. A sample of mulch shall be submitted to the GCP prior to application.

ix. Cleanup: All grass clippings, weeds, and pruning shall be removed from the project premises as necessary. Walks and driveways shall be kept free of equipment and debris. Exterior walls of building shall be kept free of soil.

When on the job site, police entire grounds to remove all trash, debris, and leaves. This shall include the vehicle parking lots, walkways, and lawn areas.

x. Aeriation and Dethatching: During the spring and again in the late summer/early fall, the entire lawn area shall be aerated using a powered aerator set to remove cores cleanly without tearing or otherwise damaging the turf. Coring tines shall be at least 2” in depth. In the spring only, following aeration, the entire lawn shall be dethatched using a powered vertical mower.

Thatch shall be removed to within ¼” of the ground surface. Contractor shall remove and dispose of all debris at an approved public or commercial dumpsite.

xi. Dormant Oil Spray: In the fall, evergreens shall be sprayed with a dormant oil spray.

xii. Final Work: During the last two weeks of the contract, the Contractor shall leave all tree mounds and rock beds in a weed free condition. Grass shall be mowed, weather conditions permitting, regardless of height.

ADDITIONAL WORK OUTSIDE THE STATEMENT OF WORK

Additional work not covered in specifications on an “as needed” and “requested” basis. Additional work shall be approved by the Contracting Officer prior to performance. With an approved modification to

PAGE 14 OF 49 1305M219QNWWN0113

the purchase order, the contractor shall be compensated for the additional work at an hourly rate, to be included in the contract, plus materials, if applicable. Materials shall be itemized on the invoice and not exceed published price listing.

ITEMIZED SERVICES REQUIREMENT SHEET

The following are service INCLUDED under this contract. The following are major service items and therefore some minor or sub item services may not be listed.

1. Aeration and Dethatching

2. Edging

3. Fertilizing

4. Grass Mowing

5. Lime

6. Mulching

7. Pruning

8. Trimming

9. Weeding

10. Bed Preparation and Maintenance

INSPECTION AND ACCEPTANCE OF WORK

The government reserves the right to inspect for quality control. Inspection of work performed under the contract shall be accomplished jointly with the Contractor’s supervisor and the GCP once a month.

The GCP and Contractor shall determine the specific date for inspection. Any corrective action required as a result of an inspection shall be accomplished prior to the monthly billing for that period. The GCP, may at any time, request correction or improvement of maintenance practices if they are found to fall below the standards of the contract specifications. The Contractor shall be notified of deficiencies in performance, in writing. Prompt corrective action shall be taken by the Contractor upon written notice of any deficiency.

The preferred method of resolving deficiencies is to allow re-performance to correct the deficiencies.

The Contractor shall be provided with the opportunity to correct substandard performance within one business day. When substandard performance is not corrected within the specified timeframe or the

Contractor refuses to re-perform the service, the unsatisfactory service is logged as a deficiency.

Deductions for deficiencies shall be calculated as 1/30th of the monthly unit price for each day that the

Contractor fails to correct.

WAGE DETERMINATION

WD 15-4235 (Rev.-9) was first posted on www.wdol.gov on 01/01/2019

REGISTER OF WAGE DETERMINATIONS UNDER | U.S. DEPARTMENT OF LABOR

THE SERVICE CONTRACT ACT | EMPLOYMENT STANDARDS ADMINISTRATION

By direction of the Secretary of Labor | WAGE AND HOUR DIVISION

| WASHINGTON D.C. 20210

| Wage Determination No.: 2015-4235 Daniel W. Simms Division of | Revision No.: 9 Director Wage Determinations| Date Of Revision: 12/26/2018 Note: Under Executive Order (EO) 13658, an hourly minimum wage of $10.60 for calendar year 2019 applies to all contracts subject to the Service Contract Act for which the contract is awarded (and any solicitation was issued) on or after January 1, 2015. If this contract is covered by the EO, the contractor must pay all workers in any classification listed on this wage determination at least $10.60 per hour (or the applicable wage rate listed on this wage determination, if it is higher) for all hours spent performing on the contract in calendar year 2019. The EO minimum wage rate will be adjusted annually.

Additional information on contractor requirements and worker protections under the EO is available at www.dol.gov/whd/govcontracts.

State: Pennsylvania

Area: Pennsylvania Counties of Allegheny, Armstrong, Beaver, Butler, Fayette, Washington, Westmoreland **Fringe Benefits Required Follow the Occupational Listing**

OCCUPATION CODE - TITLE FOOTNOTE RATE

01000 - Administrative Support And Clerical Occupations 01011 - Accounting Clerk I 14.66 01012 - Accounting Clerk II 16.92 01013 - Accounting Clerk III 20.33 01020 - Administrative Assistant 25.62 01035 - Court Reporter 17.78 01041 - Customer Service Representative I 12.78 01042 - Customer Service Representative II 14.38 01043 - Customer Service Representative III 15.69 01051 - Data Entry Operator I 13.01 01052 - Data Entry Operator II 14.19 01060 - Dispatcher, Motor Vehicle 20.06 01070 - Document Preparation Clerk 14.27 01090 - Duplicating Machine Operator 14.27 01111 - General Clerk I 13.05 01112 - General Clerk II 14.59 01113 - General Clerk III 16.37 01120 - Housing Referral Assistant 19.31 01141 - Messenger Courier 13.87 01191 - Order Clerk I 14.49 01192 - Order Clerk II 16.58 01261 - Personnel Assistant (Employment) I 16.18 01262 - Personnel Assistant (Employment) II 18.09 01263 - Personnel Assistant (Employment) III 20.18 01270 - Production Control Clerk 22.20 01290 - Rental Clerk 15.53 01300 - Scheduler, Maintenance 15.48 01311 - Secretary I 15.48 01312 - Secretary II 17.32 01313 - Secretary III 19.31 01320 - Service Order Dispatcher 18.32 01410 - Supply Technician 25.62 01420 - Survey Worker 16.06 01460 - Switchboard Operator/Receptionist 12.47

PAGE 15 OF 49 1305M219QNWWN0113

01531 - Travel Clerk I 13.87 01532 - Travel Clerk II 14.89 01533 - Travel Clerk III 15.97 01611 - Word Processor I 13.79 01612 - Word Processor II 15.53 01613 - Word Processor III 17.37 05000 - Automotive Service Occupations 05005 - Automobile Body Repairer, Fiberglass 19.63 05010 - Automotive Electrician 17.78 05040 - Automotive Glass Installer 17.10 05070 - Automotive Worker 17.10 05110 - Mobile Equipment Servicer 15.85 05130 - Motor Equipment Metal Mechanic 18.70 05160 - Motor Equipment Metal Worker 17.10 05190 - Motor Vehicle Mechanic 18.70 05220 - Motor Vehicle Mechanic Helper 15.23 05250 - Motor Vehicle Upholstery Worker 16.47 05280 - Motor Vehicle Wrecker 17.10 05310 - Painter, Automotive 19.03 05340 - Radiator Repair Specialist 17.10 05370 - Tire Repairer 13.96 05400 - Transmission Repair Specialist 18.70 07000 - Food Preparation And Service Occupations 07010 - Baker 12.08 07041 - Cook I 12.73 07042 - Cook II 14.27 07070 - Dishwasher 9.25 07130 - Food Service Worker 11.04 07210 - Meat Cutter 16.01 07260 - Waiter/Waitress 9.48 09000 - Furniture Maintenance And Repair Occupations 09010 - Electrostatic Spray Painter 16.37 09040 - Furniture Handler 12.62 09080 - Furniture Refinisher 17.27 09090 - Furniture Refinisher Helper 13.89 09110 - Furniture Repairer, Minor 15.47 09130 - Upholsterer 18.59 11000 - General Services And Support Occupations 11030 - Cleaner, Vehicles 9.51 11060 - Elevator Operator 13.61 11090 - Gardener 16.24 11122 - Housekeeping Aide 13.61 11150 - Janitor 13.61 11210 - Laborer, Grounds Maintenance 13.18 11240 - Maid or Houseman 11.50 11260 - Pruner 12.96 11270 - Tractor Operator 15.18 11330 - Trail Maintenance Worker 13.18 11360 - Window Cleaner 13.78 12000 - Health Occupations 12010 - Ambulance Driver 15.94 12011 - Breath Alcohol Technician 19.16 12012 - Certified Occupational Therapist Assistant 22.87 12015 - Certified Physical Therapist Assistant 23.98 12020 - Dental Assistant 17.16 12025 - Dental Hygienist 27.50 12030 - EKG Technician 23.39 12035 - Electroneurodiagnostic Technologist 23.39 12040 - Emergency Medical Technician 15.94 12071 - Licensed Practical Nurse I 17.17 12072 - Licensed Practical Nurse II 19.21 12073 - Licensed Practical Nurse III 21.42 12100 - Medical Assistant 14.34 12130 - Medical Laboratory Technician 19.03 12160 - Medical Record Clerk 15.54 12190 - Medical Record Technician 17.64 12195 - Medical Transcriptionist 18.08

PAGE 16 OF 49 1305M219QNWWN0113

12210 - Nuclear Medicine Technologist 28.24 12221 - Nursing Assistant I 11.52 12222 - Nursing Assistant II 12.96 12223 - Nursing Assistant III 14.14 12224 - Nursing Assistant IV 15.87 12235 - Optical Dispenser 17.49 12236 - Optical Technician 15.71 12250 - Pharmacy Technician 13.63 12280 - Phlebotomist 16.38 12305 - Radiologic Technologist 23.28 12311 - Registered Nurse I 23.50 12312 - Registered Nurse II 28.75 12313 - Registered Nurse II, Specialist 28.75 12314 - Registered Nurse III 34.78 12315 - Registered Nurse III, Anesthetist 34.78 12316 - Registered Nurse IV 41.68 12317 - Scheduler (Drug and Alcohol Testing) 23.74 12320 - Substance Abuse Treatment Counselor 18.77 13000 - Information And Arts Occupations 13011 - Exhibits Specialist I 21.25 13012 - Exhibits Specialist II 27.77 13013 - Exhibits Specialist III 29.81 13041 - Illustrator I 19.11 13042 - Illustrator II 24.36 13043 - Illustrator III 27.75 13047 - Librarian 25.93 13050 - Library Aide/Clerk 10.34 13054 - Library Information Technology Systems 23.28 Administrator 13058 - Library Technician 16.06 13061 - Media Specialist I 16.89 13062 - Media Specialist II 18.90 13063 - Media Specialist III 21.07 13071 - Photographer I 14.91 13072 - Photographer II 18.25 13073 - Photographer III 21.51 13074 - Photographer IV 25.29 13075 - Photographer V 30.59 13090 - Technical Order Library Clerk 12.19 13110 - Video Teleconference Technician 19.30 14000 - Information Technology Occupations 14041 - Computer Operator I 15.90 14042 - Computer Operator II 17.79 14043 - Computer Operator III 19.84 14044 - Computer Operator IV 22.05 14045 - Computer Operator V 24.41 14071 - Computer Programmer I (see 1) 22.35 14072 - Computer Programmer II (see 1) 14073 - Computer Programmer III (see 1) 14074 - Computer Programmer IV (see 1) 14101 - Computer Systems Analyst I (see 1) 14102 - Computer Systems Analyst II (see 1) 14103 - Computer Systems Analyst III (see 1) 14150 - Peripheral Equipment Operator 15.90 14160 - Personal Computer Support Technician 22.05 14170 - System Support Specialist 28.26 15000 - Instructional Occupations 15010 - Aircrew Training Devices Instructor (Non-Rated) 28.48 15020 - Aircrew Training Devices Instructor (Rated) 34.45 15030 - Air Crew Training Devices Instructor (Pilot) 41.30 15050 - Computer Based Training Specialist / Instructor 28.12 15060 - Educational Technologist 30.25 15070 - Flight Instructor (Pilot) 41.30 15080 - Graphic Artist 22.25 15085 - Maintenance Test Pilot, Fixed, Jet/Prop 41.30 15086 - Maintenance Test Pilot, Rotary Wing 41.30 15088 - Non-Maintenance Test/Co-Pilot 41.30

PAGE 17 OF 49 1305M219QNWWN0113

15090 - Technical Instructor 22.99 15095 - Technical Instructor/Course Developer 28.13 15110 - Test Proctor 18.56 15120 - Tutor 18.56 16000 - Laundry, Dry-Cleaning, Pressing And Related Occupations 16010 - Assembler 9.94 16030 - Counter Attendant 9.94 16040 - Dry Cleaner 12.40 16070 - Finisher, Flatwork, Machine 9.94 16090 - Presser, Hand 9.94 16110 - Presser, Machine, Drycleaning 9.94 16130 - Presser, Machine, Shirts 9.94 16160 - Presser, Machine, Wearing Apparel, Laundry 9.94 16190 - Sewing Machine Operator 13.20 16220 - Tailor 14.02 16250 - Washer, Machine 10.76 19000 - Machine Tool Operation And Repair Occupations 19010 - Machine-Tool Operator (Tool Room) 19.35 19040 - Tool And Die Maker 22.78 21000 - Materials Handling And Packing Occupations 21020 - Forklift Operator 20.33 21030 - Material Coordinator 22.13 21040 - Material Expediter 22.13 21050 - Material Handling Laborer 18.10 21071 - Order Filler 13.89 21080 - Production Line Worker (Food Processing) 20.33 21110 - Shipping Packer 16.07 21130 - Shipping/Receiving Clerk 16.07 21140 - Store Worker I 14.71 21150 - Stock Clerk 18.67 21210 - Tools And Parts Attendant 20.33 21410 - Warehouse Specialist 20.33 23000 - Mechanics And Maintenance And Repair Occupations 23010 - Aerospace Structural Welder 31.24 23019 - Aircraft Logs and Records Technician 26.33 23021 - Aircraft Mechanic I 30.00 23022 - Aircraft Mechanic II 31.24 23023 - Aircraft Mechanic III 32.74 23040 - Aircraft Mechanic Helper 23.72 23050 - Aircraft, Painter 29.40 23060 - Aircraft Servicer 26.33 23070 - Aircraft Survival Flight Equipment Technician 29.40 23080 - Aircraft Worker 27.83 23091 - Aircrew Life Support Equipment (ALSE) Mechanic 27.83 I 23092 - Aircrew Life Support Equipment (ALSE) Mechanic 30.00

II

23110 - Appliance Mechanic 21.91 23120 - Bicycle Repairer 13.96 23125 - Cable Splicer 33.52 23130 - Carpenter, Maintenance 24.81 23140 - Carpet Layer 19.73 23160 - Electrician, Maintenance 29.33 23181 - Electronics Technician Maintenance I 25.05 23182 - Electronics Technician Maintenance II 26.39 23183 - Electronics Technician Maintenance III 27.63 23260 - Fabric Worker 22.01 23290 - Fire Alarm System Mechanic 21.02 23310 - Fire Extinguisher Repairer 20.66 23311 - Fuel Distribution System Mechanic 28.53 23312 - Fuel Distribution System Operator 22.93 23370 - General Maintenance Worker 18.17 23380 - Ground Support Equipment Mechanic 30.00 23381 - Ground Support Equipment Servicer 26.33 23382 - Ground Support Equipment Worker 27.83 23391 - Gunsmith I 20.66 23392 - Gunsmith II 23.31

PAGE 18 OF 49 1305M219QNWWN0113

23393 - Gunsmith III 25.70 23410 - Heating, Ventilation And Air-Conditioning 22.47 Mechanic 23411 - Heating, Ventilation And Air Contidioning 23.28 Mechanic (Research Facility) 23430 - Heavy Equipment Mechanic 22.71 23440 - Heavy Equipment Operator 23.49 23460 - Instrument Mechanic 25.70 23465 - Laboratory/Shelter Mechanic 24.55 23470 - Laborer 14.78 23510 - Locksmith 20.25 23530 - Machinery Maintenance Mechanic 23.04 23550 - Machinist, Maintenance 20.36 23580 - Maintenance Trades Helper 16.43 23591 - Metrology Technician I 25.70 23592 - Metrology Technician II 26.63 23593 - Metrology Technician III 27.79 23640 - Millwright 25.25 23710 - Office Appliance Repairer 19.71 23760 - Painter, Maintenance 21.29 23790 - Pipefitter, Maintenance 29.62 23810 - Plumber, Maintenance 27.78 23820 - Pneudraulic Systems Mechanic 25.70 23850 - Rigger 23.24 23870 - Scale Mechanic 23.31 23890 - Sheet-Metal Worker, Maintenance 31.34 23910 - Small Engine Mechanic 17.11 23931 - Telecommunications Mechanic I 26.90 23932 - Telecommunications Mechanic II 27.85 23950 - Telephone Lineman 30.54 23960 - Welder, Combination, Maintenance 20.72 23965 - Well Driller 21.05 23970 - Woodcraft Worker 25.70 23980 - Woodworker 20.66 24000 - Personal Needs Occupations 24550 - Case Manager 15.51 24570 - Child Care Attendant 10.71 24580 - Child Care Center Clerk 13.14 24610 - Chore Aide 11.29 24620 - Family Readiness And Support Services 15.51 Coordinator 24630 - Homemaker 15.51 25000 - Plant And System Operations Occupations 25010 - Boiler Tender 26.81 25040 - Sewage Plant Operator 26.28 25070 - Stationary Engineer 26.81 25190 - Ventilation Equipment Tender 19.85 25210 - Water Treatment Plant Operator 26.28 27000 - Protective Service Occupations 27004 - Alarm Monitor 16.32 27007 - Baggage Inspector 11.08 27008 - Corrections Officer 27.48 27010 - Court Security Officer 27.76 27030 - Detection Dog Handler 14.84 27040 - Detention Officer 27.48 27070 - Firefighter 28.03 27101 - Guard I 11.08 27102 - Guard II 14.84 27131 - Police Officer I 27.34 27132 - Police Officer II 30.37 28000 - Recreation Occupations 28041 - Carnival Equipment Operator 11.56 28042 - Carnival Equipment Repairer 12.36 28043 - Carnival Worker 9.28 28210 - Gate Attendant/Gate Tender 13.83 28310 - Lifeguard 10.94 28350 - Park Attendant (Aide) 15.47

PAGE 19 OF 49 1305M219QNWWN0113

28510 - Recreation Aide/Health Facility Attendant 11.29 28515 - Recreation Specialist 18.70 28630 - Sports Official 12.32 28690 - Swimming Pool Operator 18.27 29000 - Stevedoring/Longshoremen Occupational Services 29010 - Blocker And Bracer 23.40 29020 - Hatch Tender 23.40 29030 - Line Handler 23.40 29041 - Stevedore I 22.11 29042 - Stevedore II 24.66 30000 - Technical Occupations 30010 - Air Traffic Control Specialist, Center (HFO) (see 2) 39.13 30011 - Air Traffic Control Specialist, Station (HFO) (see 2) 26.99 30012 - Air Traffic Control Specialist, Terminal (HFO) (see 2) 29.72 30021 - Archeological Technician I 18.25 30022 - Archeological Technician II 20.41 30023 - Archeological Technician III 24.87 30030 - Cartographic Technician 25.30 30040 - Civil Engineering Technician 23.33 30051 - Cryogenic Technician I 26.59 30052 - Cryogenic Technician II 27.01 30061 - Drafter/CAD Operator I 18.25 30062 - Drafter/CAD Operator II 20.41 30063 - Drafter/CAD Operator III 22.77 30064 - Drafter/CAD Operator IV 28.00 30081 - Engineering Technician I 16.06 30082 - Engineering Technician II 18.06 30083 - Engineering Technician III 20.98 30084 - Engineering Technician IV 24.78 30085 - Engineering Technician V 30.31 30086 - Engineering Technician VI 36.67 30090 - Environmental Technician 21.50 30095 - Evidence Control Specialist 22.08 30210 - Laboratory Technician 21.12 30221 - Latent Fingerprint Technician I 24.45 30222 - Latent Fingerprint Technician II 27.01 30240 - Mathematical Technician 25.30 30361 - Paralegal/Legal Assistant I 19.93 30362 - Paralegal/Legal Assistant II 24.70 30363 - Paralegal/Legal Assistant III 30.21 30364 - Paralegal/Legal Assistant IV 33.89 30375 - Petroleum Supply Specialist 27.01 30390 - Photo-Optics Technician 26.70 30395 - Radiation Control Technician 27.01 30461 - Technical Writer I 23.84 30462 - Technical Writer II 29.16 30463 - Technical Writer III 35.28 30491 - Unexploded Ordnance (UXO) Technician I 24.87 30492 - Unexploded Ordnance (UXO) Technician II 30.09 30493 - Unexploded Ordnance (UXO) Technician III 36.07 30494 - Unexploded (UXO) Safety Escort 24.87 30495 - Unexploded (UXO) Sweep Personnel 24.87 30501 - Weather Forecaster I 26.60 30502 - Weather Forecaster II 29.74 30620 - Weather Observer, Combined Upper Air Or (see 2) 22.77 Surface Programs 30621 - Weather Observer, Senior (see 2) 25.30 31000 - Transportation/Mobile Equipment Operation Occupations 31010 - Airplane Pilot 30.09 31020 - Bus Aide 19.42 31030 - Bus Driver 24.49 31043 - Driver Courier 13.74 31260 - Parking and Lot Attendant 10.82 31290 - Shuttle Bus Driver 14.65 31310 - Taxi Driver 11.16 31361 - Truckdriver, Light 14.65 31362 - Truckdriver, Medium 17.07

PAGE 20 OF 49 1305M219QNWWN0113

31363 - Truckdriver, Heavy 21.65 31364 - Truckdriver, Tractor-Trailer 21.65 99000 - Miscellaneous Occupations 99020 - Cabin Safety Specialist 14.67 99030 - Cashier 9.00 99050 - Desk Clerk 10.36 99095 - Embalmer 27.76 99130 - Flight Follower 24.87 99251 - Laboratory Animal Caretaker I 13.44 99252 - Laboratory Animal Caretaker II 14.32 99260 - Marketing Analyst 29.87 99310 - Mortician 27.76 99410 - Pest Controller 17.08 99510 - Photofinishing Worker 14.07 99710 - Recycling Laborer 20.42 99711 - Recycling Specialist 23.52 99730 - Refuse Collector 18.88 99810 - Sales Clerk 12.12 99820 - School Crossing Guard 12.83 99830 - Survey Party Chief 21.94 99831 - Surveying Aide 13.07 99832 - Surveying Technician 19.94 99840 - Vending Machine Attendant 14.01 99841 - Vending Machine Repairer 16.78 99842 - Vending Machine Repairer Helper 14.01

Note: Executive Order (EO) 13706, Establishing Paid Sick Leave for Federal Contractors, applies to all contracts subject to the Service Contract Act for which the contract is awarded (and any solicitation was issued) on or after January 1, 2017. If this contract is covered by the EO, the contractor must provide employees with 1 hour of paid sick leave for every 30 hours they work, up to 56 hours of paid sick leave each year. Employees must be permitted to use paid sick leave for their own illness, injury or other health-related needs, including preventive care; to assist a family member (or person who is like family to the employee) who is ill, injured, or has other health-related needs, including preventive care; or for reasons resulting from, or to assist a family member (or person who is like family to the employee) who is the victim of, domestic violence, sexual assault, or stalking. Additional information on contractor requirements and worker protections under the EO is available at www.dol.gov/whd/govcontracts.

ALL OCCUPATIONS LISTED ABOVE RECEIVE THE FOLLOWING BENEFITS:

HEALTH & WELFARE: $4.48 per hour or $179.20 per week or $776.53 per month

HEALTH & WELFARE EO 13706: $4.18 per hour, or $167.20 per week, or $724.53 per month*

*This rate is to be used only when compensating employees for performance on an SCA-covered contract also covered by EO 13706, Establishing Paid Sick Leave for Federal Contractors. A contractor may not receive credit toward its SCA obligations for any paid sick leave provided pursuant to EO 13706.

VACATION: 2 weeks paid vacation after 1 year of service with a contractor or successor, 3 weeks after 8 years, and 4 weeks after 15 years. Length of service includes the whole span of continuous service with the present contractor or successor, wherever employed, and with the predecessor contractors in the performance of similar work at the same Federal facility. (See 29 CFR 4.173)

HOLIDAYS: A minimum of ten paid holidays per year: New Year's Day, Martin Luther King Jr.'s Birthday, Washington's Birthday, Memorial Day, Independence Day, Labor Day, Columbus Day, Veterans' Day, Thanksgiving Day, and Christmas Day. (A contractor may substitute for any of the named holidays another day off with pay in accordance with a plan communicated to the employees involved.) (See 29 CFR 4.174)

PAGE 21 OF 49 1305M219QNWWN0113

THE OCCUPATIONS WHICH HAVE NUMBERED FOOTNOTES IN PARENTHESES RECEIVE THE FOLLOWING:

1) COMPUTER EMPLOYEES: Under the SCA at section 8(b), this wage determination does not apply to any employee who individually qualifies as a bona fide executive, administrative, or professional employee as defined in 29 C.F.R. Part 541. Because most Computer System Analysts and Computer Programmers who are compensated at a rate not less than $27.63 (or on a salary or fee basis at a rate not less than $455 per week) an hour would likely qualify as exempt computer professionals, (29 C.F.R. 541.

400) wage rates may not be listed on this wage determination for all occupations within those job families. In addition, because this wage determination may not list a wage rate for some or all occupations within those job families if the survey data indicates that the prevailing wage rate for the occupation equals or exceeds $27.63 per hour conformances may be necessary for certain nonexempt employees. For example, if an individual employee is nonexempt but nevertheless performs duties within the scope of one of the Computer Systems Analyst or Computer Programmer occupations for which this wage determination does not specify an SCA wage rate, then the wage rate for that employee must be conformed in accordance with the conformance procedures described in the conformance note included on this wage determination.

Additionally, because job titles vary widely and change quickly in the computer industry, job titles are not determinative of the application of the computer professional exemption. Therefore, the exemption applies only to computer employees who satisfy the compensation requirements and whose primary duty consists of:

(1) The application of systems analysis techniques and procedures, including consulting with users, to determine hardware, software or system functional specifications;

(2) The design, development, documentation, analysis, creation, testing or modification of computer systems or programs, including prototypes, based on and related to user or system design specifications;

(3) The design, documentation, testing, creation or modification of computer programs related to machine operating systems; or

(4) A combination of the aforementioned duties, the performance of which requires the same level of skills. (29 C.F.R. 541.400).

2) AIR TRAFFIC CONTROLLERS AND WEATHER OBSERVERS - NIGHT PAY & SUNDAY PAY: If you work at night as part of a regular tour of duty, you will earn a night differential and receive an additional 10% of basic pay for any hours worked between 6pm and 6am.

If you are a full-time employed (40 hours a week) and Sunday is part of your regularly scheduled workweek, you are paid at your rate of basic pay plus a Sunday premium of 25% of your basic rate for each hour of Sunday work which is not overtime (i.e. occasional work on Sunday outside the normal tour of duty is considered overtime work).

** HAZARDOUS PAY DIFFERENTIAL **

An 8 percent differential is applicable to employees employed in a position that represents a high degree of hazard when working with or in close proximity to ordnance, explosives, and incendiary materials. This includes work such as screening, blending, dying, mixing, and pressing of sensitive ordnance, explosives, and pyrotechnic compositions such as lead azide, black powder and photoflash powder.

All dry-house activities involving propellants or explosives. Demilitarization, modification, renovation, demolition, and maintenance operations on sensitive ordnance, explosives and incendiary materials. All operations involving re-grading and cleaning of artillery ranges.

A 4 percent differential is applicable to employees employed in a position that represents a low degree of hazard when working with, or in close proximity to ordnance, (or employees possibly adjacent to) explosives and incendiary materials which involves potential injury such as…