13042072A - Detonating Cord Table.PDF

This is a technical drawing specification for cordage detonating products manufactured by the U.S. Army Armament Research, Development and Engineering Center (ARDEC) at Picatinny Arsenal, New Jersey. The document provides detailed engineering specifications for various types of detonating cord configurations in a tabular format with 18 line items.

The drawing specifies multiple cordage detonating products with varying weights (ranging from approximately 3.37 to 28.51 pounds per 1,000 feet), construction types (textile, plastic sheath, counter-wrapped synthetic textile, and braided configurations), and performance characteristics. Products are constructed with materials including plastic, textile with plastic sheath, and synthetic textile. Key specifications include maximum or finished conduit per 1,000 feet, minimum breaking strength, and diameter measurements. The cord types are designated with classes and types, including textile finishes, plastic construction variants, and specialty configurations with colored olive drab finishes. The document notes that all type III detonating cord shall be loaded with PETN powder and finished to specifications, with color designation dependent on construction type and similarity requirements. The drawing includes mechanical properties specifications, tolerance information on angles and measurements, and references to third-angle projection methodology. Design approvals are dated 12-06-25, with the document marked as sheet 2 of 2 and cage code 13042072.