13032542 (M2A2).pdf
PDF 180 KB Posted
- Attached to
- RECTANGULAR POLYMER AMMUNITION CONTAINERS
- Solicitation number
- W15QKN-25-Q-19GK
About this file
This document is a detailed engineering drawing for the Box, Ammunition, M2A2 Assembly, produced by the US Army Armament Research, Development and Engineering Center at Picatinny Arsenal. The technical drawing provides comprehensive specifications for an ammunition container, including precise dimensional details of 11+1/32 x 5 9/16+1/64 x 6 25/32+1/64 inches, with specific requirements for gasket compression, paint thickness, and assembly tolerances. The drawing includes key notes about applicable military standards (ASME Y14.5M-1994, MIL-A-2550, MIL-DTL-3060), paint touch-up procedures, and manufacturing specifications. The document covers two primary components: a body assembly (Part No. 13032548) and a cover assembly (Part No. 13032549), with design approval dated 2012-07-25 and a distribution statement allowing unlimited public release.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| MIL-STD-1904C.pdf | ||
| 7553315 (M19A1).pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
D
C
B
A
D
C
B
A
8 7 6 5 4 3 12
DESIGN ACTIVITY
SIZE CAGE CODE
SCALE UNIT WT.
DRAWN BY DATE(YEAR-MO-DA)
CHECKER ENGINEER
ENGINEER QUALITY ENGINEER
DRAWING APPROVAL
DESIGN APPROVALMATL ENGR MODELED BY
CONTRACT NUMBER
CONTRACTOR
SHEET
DRAWING SIZE D
TOLERANCES ON ANGLES �# �$
2 PLACE DECIMALS �#
3 PLACE DECIMALS �#
FORMAT: D_TACOM_ENG_1_0 12345678
DWG NO.
7 1/2
MAX
12 1/32 MAX
6 3/32 MAX
NOTE 4
WHEN BOX IS ASSEMBLED WITH COVER CLOSED
BODY HINGE SHALL BUTT AGAINST COVER HINGE
WITH CENTER LINE OF BODY COINCIDING WITH
CENTER LINE OF COVER.
REVISIONS
APPROVEDDATE(YEAR-MO-DA)DESCRIPTIONDRAWING REVMODEL REV
BMG2012-07-26
PRODUCT BASELINE
ERR R12K2024
1 OF 1 3/4
1303254219200D
BOX, AMMUNITION,
M2A2 ASSEMBLY
US ARMY
ARMAMENT RESEARCH, DEVELOPMENT AND ENGINEERING CENTER
PICATINNY ARSENAL, NEW JERSEY 07806-5000
2012-07-25T. CORADESCHI
2012-07-25J. RUNELL
J. SLIKER
2011-10-13A.Z.
APPLICATION
USED ONNEXT ASSY
SEE ENGINEERING RECORDS
FINAL
PMIC
MECHANICAL
PROPERTIES
YP
TS
EL2
RA
BH
RH A. ZIOBRO
THIRD ANGLE PROJECTION
UNLESS OTHERWISE SPECIFIED
DIMENSIONS ARE IN INCHES
DO NOT SCALE DRAWING
PART NO. 13032542
THIS DRAWING WAS GENERATED FROM A SOLID MODEL
AND IS CAD MAINTAINED. CHANGES SHALL BE
INCORPORATED BY THE DESIGN ACTIVITY.
NSN NONE
REMARKSNOMENCLATURE
OR DESCRIPTION
PART NO. OR
IDENTIFYING NO.
CAGE
CODE
QTY.
REQ.
ITEM OR
FIND NO.
BODY ASSEMBLY, M2A2130325481920011
COVER ASSEMBLY, M2A2130325491920012
NOTES
1. APPLICABLE STANDARDS/SPECIFICATIONS:
A. ASME Y14.5M-1994
B. MIL-A-2550
C. MIL-DTL-3060
2. GASKET REQUIREMENTS:
.090�#.020 COMPRESSION OF GASKET WHEN CLOSED.
3. ANY PAINT DAMAGE PRIOR TO OR DURING THIS ASSEMBLY MUST BE RETOUCHED
TO MAINTAIN A 1.0 MIL THICKNESS OF PAINT, DRAWING 9347108 (SEE NOTE 5).
4. AN ADDITIONAL 1/64 INCH TOLERANCE PER SIDE MAY BE ADDED TO COVER
WIDTH AT CORNERS. TOLERANCE TO EXTEND FOR 1/2 INCH FROM CORNER.
5. IF ALTERNATE PAINT IS USED, TOUCH UP ANY DAMAGED PAINT AREAS
USING COMPATIBLE PAINT IN THE PROPER THICKNESS AS APPROVED
BY THE CONTRACTING OFFICER.
DISTRIBUTION STATEMENT A.
APPROVED FOR PUBLIC RELEASE:
DISTRIBUTION IS UNLIMITED.
FRACTIONS �# 1/16
INSIDE DIMENSIONS
11+1/32 X 5 9/16+1/64 X 6 25/32+1/64
SCALE 1/2
| Sheet 1 |
| Views |
| main_view |
| right_1 |
| left_1 |
| top_1 |
| new_view_5 |
File details come from the government source that posted it. Updated .