13021m1306 REV 1.pdf
PDF 1 MB Posted
- Attached to
- Aircraft Prototype Systems Division (ASPD) procurement of CH-53K Cargo Roller Rail Anodizing Service
- Solicitation number
- N00421-22-Q-0273
View the file
Other files
| File | Type | Posted |
|---|---|---|
| 13021M1307 REV 1.pdf | ||
| Cargo Roller Rail Anodizing Service Solicitation.pdf | ||
| N00421-22-Q-0273 Released.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
A
2345678
C
B
D
A
C
B
5 1
D
37 468 DWG
NO
SH REV
36.330
10X 4.020
.25
.25
.25
.25
2.470.775
2X .094
2X 1.450
2X .325
3X .080 3X R
ALL AROUND
.063
.37
4X R.25
2X .125
2X .137
2X .093
2X .094
A7
A52
A7
A2
A5
NOTES:
1. REMOVE ALL BURRS AND SHARP EDGES.
2. ANODIZE PER MIL-A-8625, TYPE 1, CLASS 1.
3. PRIOR TO PRIME AND PAINT, MASK AREAS APPROXIMATELY AS SHOWN.
4. PRIME IAW NAVAIR 01-1A-509-2 USING MIL-PRF-23377, TYPE 1,
CLASS C2 EPOXY PRIMER.
5. FINAL FINISH IAW NAVAIR 01-1A-509-2 USING TWO (2) COATS
MIL-PRF-85285 TYPE 1 POLYURETHANE TOPCOAT, COLOR NO. 37038
(BLACK) IAW FED-STD-595.
6. AT LOCATION INDICATED, FINAL FINISH IAW NAVAIR 01-1A-509-2 USING
TWO (2) COATS MIL-PRF-85285 TYPE 1 POLYURETHANE TOPCOAT,
COLOR NO. 12197 (INTERNATIONAL ORANGE) IAW FED-STD-595.
7. APPLY A-A-59166 TYPE II, COLOR 37038 (BLACK), NON-SLIP COATING
TO AREA INDICATED IAW MANUFACTURER'S INSTRUCTIONS.
8. MARK WITH INDELIBLE INK OF CONTRASTING COLOR IAW MIL-STD-130
AT LOCATION INDICATED: 02591-13021M1306-01, -03, AND -05, RESPECTIVELY.
9. #8-32, HELICAL COIL INSERT THREAD IAW NASM33537. INSTALL .75 TO 1.50
TURNS BELOW SURFACE AND REMOVE TANG.
REVISION HISTORY
DATEAPPROVERORIGINATORDESCRIPTIONREV
APPLICATION
NEXT ASSY USED ON
13021M1212 CH-53K
AIRCRAFT PROTOTYPE SYSTEMS DIVISION (APSD)
INTERPRET DRAWING IAW ASME Y14.100-2017
UNLESS OTHERWISE SPECIFIED,
DIM ARE IN INCHES.
TOL ON ANGLE �#�1�$�
2X �#�.03, 3X �#�.010
SURFACE FINISH 125
PROJECT NUMBER
NAVAL AIR WARFARE CENTER - AIRCRAFT DIVISION
PATUXENT RIVER, MARYLAND 2067013021
DRAFTER K. ENGEL 2022-01-12
TITLE:
CARGO ROLLER RAIL ASSY
CH-53K ROLLER RAIL FABRICATION
CHECKER SIGNATURE ON FILE
ENGR C. HUNSICKER 2022-01-12
STRESS
THIRD ANGLE PROJECTION MECH
APPVL
ELEC
APPVL
SIZE CAGE CODE DRAWING NO. REV
D 02591 13021M1306 1
SCALE:1/2 SHEET 1 OF 3RESERVED FOR CM
DISTRIBUTION STATEMENT C:
DISTRIBUTION AUTHORIZED TO U.S.
GOVERNMENT AGENCIES AND THEIR
CONTRACTORS ONLY PER DOD 5230.24,
(10-04-14). OTHER REQUESTS SHALL
BE REFERRED TO CHIEF ENGINEER,
AIRCRAFT PROTOTYPE SYSTEMS
DIVISION.
DESTRUCTION NOTICE:
DESTROY BY ANY METHOD THAT WILL
PREVENT DISCLOSURE OF CONTENTS OR
RECONSTRUCTION OF THE DOCUMENT.
13021M1306 1 1
SEE DETAIL F
SEE DETAIL ASEE DETAIL B SEE DETAIL C
BS
BS
ALL AROUND -101 CARGO ROLLER RAIL
SECTION D-D
SCALE 2/1
-101 23 PLACES
-103 11 PLACES
-105 21 PLACES
DETAIL F
SCALE 1/1
-01 CARGO ROLLER RAIL ASSY
SEE DETAIL ASEE DETAIL B SEE DETAIL C
PARTS LIST
SPECIFICATIONDESCRIPTION PART NUMBERCAGEFN
QTY
-01-03-05
CARGO ROLLER RAIL ASSY13021M1306-0102591-\
7050-T7451 AL ALY (AMS4050)CARGO ROLLER RAIL13021M1306-1010259111
HELICAL COIL, #8-32 X 2 DIAMS1221599690621
CARGO ROLLER RAIL ASSY13021M1306-0302591-\
7050-T7451 AL ALY (AMS4050)CARGO ROLLER RAIL13021M1306-1030259131
HELICAL COIL, #8-32 X 2 DIAMS1221599690641
CARGO ROLLER RAIL ASSY13021M1306-0502591-\
7050-T7451 AL ALY (AMS4050)CARGO ROLLER RAIL13021M1306-1050259151
HELICAL COIL, #8-32 X 2 DIAMS1221599690661
REFERENCE ONLY
THIS DOCUMENT IS UNDER
CONFIGURATION
MANAGEMENT
CONTROL
2345678
C
B
D
A
C
B
5 1
D
37 468 DWG
NO
SH REV
2X BS.94
3X .750
2X .75
.250
2X R BS.13 BS.94
BS.380
+.005 -.000
BS1.075
+.000 -.020
2X R BS.13
BS.65
BS.38
6X .063
18X R.13
2X R.06
4X R
TOPSIDE AND UNDERSIDE
.06 2X R.13
3X .750
3X 1.500
2X .75
BS.380
+.005 -.000
BS1.075
3X 1.500
24X R.13
6X .063
4X R.13
2X 1.50
2X ( ).093
2X X 45�$�.050
BS.38
2.10
4X R.13
2X .25
2X .66
.96
.75
4X R
TOPSIDE AND UNDERSIDE
.06
.080
.75
.580
.313 -.171.166
.813
R.06
2X BS.250
4X R BS.13
2X BS.81
.13
R ALL AROUND.06
3X 1.500
3X .750
2X .75
2X R.13
22X R.13
6X .063
BS.380
+.005 -.000
BS.94
2X R BS.13
BS1.075
+.000 -.020
.250
2X R BS.13
BS.65
R.13
B6
B7
B5
C4
SIZE CAGE CODE DRAWING NO. REV
D 02591 13021M1306 1
SCALE:2/1 SHEET 2 OF 3
RESERVED FOR CM
13021M1306 2 1
DETAIL A
SCALE 2/1
-101 10 PLACES
-103 4 PLACES
-105 9 PLACES
INSIDE HOLE SURFACE
DETAIL B
SCALE 2/1
INSIDE HOLE SURFACE
DETAIL C
SCALE 2/1
INSIDE HOLE SURFACE
SECTION E-ESECTION G-G
ALL AROUND
CONFIGURATION
2345678
C
B
D
A
C
B
5 1
D
37 468 DWG
NO
SH REV
.063
.063
.375
R.19
R.19
(R ).25
6X 4.020
16.840
11X 4.020
33.690
B4
1 6
SIZE CAGE CODE DRAWING NO. REV
D 02591 13021M1306 1
SCALE:1/2 SHEET 3 OF 3
RESERVED FOR CM
13021M1306 3 1
-103 CARGO ROLLER RAIL
IDENTICAL TO -101 EXCEPT AS NOTED
-105 CARGO ROLLER RAIL
IDENTICAL TO -101 EXCEPT AS NOTED
SECTION H-H
SCALE 2/1
-03 CARGO ROLLER RAIL ASSY
-05 CARGO ROLLER RAIL ASSY
CONFIGURATION
File details come from the government source that posted it. Updated .