Procurement_of_parts_for_the_modification_of_SDD_engines__SOW_Draft_11_May_2017.docx

Procurement of parts for the modification of E-2D System Development & Demonstration (SD&D) T56-A-427A Engines Statement of Work (SOW)

Approved By: ___________________ Title: PMA-231 Propulsion and Power IPT Lead Dated: 11 May 2017

E-2D Avionic Units Under Test (UUTs). February 25, 2011

Attachment (1)

Table of Contents

3.2 Contractor Responsibilities 2

3.3. Handling and Storage Requirements………….………………………………………

3.4 Program Security

4.0 ACRONYM LIST 4

i

INTRODUCTION

This Statement of Work (SOW) defines the efforts to be performed by the Contractor as part of the United States Navy’s (USN’s) modification of the System Development & Demonstration (SD&D) T56-A-427A engines to a production configuration which will support management of one engine configurations in the Fleet and provide flexibility for TYCOM’s to support Fleet and Flight test aircraft engines.

1.1 Objective

The objective of this SOW is to procure required material to support modification of the T56-A-427A SD&D flight test engines. This modification reduces cost/management and increases availability of material in support of one configuration for the T56-A-427A fleet/flight test aircraft.

APPLICABLE DOCUMENTS

Precious Metals Recovery Program RR Engineering Department Report (EDR) 20391

REQUIREMENTS

The Contractor shall procure, package and deliver the following items for the modification of the T56-A-427A SDD flight test engines to be production representative.

Engine Unit: 114710

3.1 Technical Data

3.1.1 The Contractor shall comply with the applicable documents listed in Section 2.0 of this SOW.

3.2 Contractor Responsibilities

3.2.1 The Contractor shall procure, package and deliver the material required to modify a T56-A-427A SDD engine. The contractor shall procure the current approved configuration material of a T56-A-427A production engine. When the material is packaged for shipment to the depot repair site, the package shall contain a copy of the parts drawing.

3.2.2 The Contractor shall perform the following activities for the procurement and Packaging, Handling, Storage, and Transportation (PHS&T) for the T56-A-427A aircraft engine parts.

3.3. Handling and Storage Requirements

The Contractor shall ensure that system components are handled by common equipment (e.g., forklifts, hand trucks, loaders, and associated equipment, in preparation for shipment and storage).

3.4 Program Security

The Contractor shall maintain security procedures and controls to prevent unauthorized disclosure of controlled unclassified information and to control distribution of controlled unclassified information in accordance with DoD 5220.22-M, National Industrial Security Program Operating Manual (NISPOM), DoDM 5200.01,DoD Information Security Program Manual and SECNAV M-5510.36A, Department of the Navy Information Security Program. All Contractor facilities shall provide an appropriate means of storage for controlled unclassified and classified information and materials.

All controlled unclassified information shall be appropriately identified and marked as For Official Use Only in accordance with DoDM 5200.01, Information Security Program: Controlled Unclassified Information (CUI) Volume 4 (enclosure 3) and DoD 5400.7-R (Freedom of Information Act Regulation) (Chapter 3). For Official Use Only information generated and/or provided under this contract shall be marked and safeguarded. All controlled unclassified technical information shall be appropriately identified and marked as For Official Use Only with the following distribution statement:

DISTRIBUTION STATEMENT D:

DISTRIBUTION STATEMENT D: Distribution authorized to the Department of Defense and U.S. DoD Contractors only (critical technology) (see Note). Other requests shall be referred to Program Executive Officer Tactical (PEO (T)), PMA-231, 47123 Buse Rd., RADM William A Moffett Building, Patuxent River, MD 20670-1547. Note: Use date of current Security Classification Guide.

Public Release. No controlled unclassified information pertaining to this contract shall be released for public dissemination, including posting to any social media sites such as Facebook or Twitter, unless it has been approved for public release by appropriate U.S. Government authority. Proposed public releases shall be submitted for approval prior to release through PEO (T), Public Affairs Office, 47123 Buse Road, RADM William A. Moffett Building, Patuxent River, MD 20670-1547.

3.4.1 Operational Security (OPSEC)

The Contractor shall maintain an OPSEC program to protect controlled unclassified and classified activities, information, equipment, and material used or developed by the Contractor and any subcontractor during performance of the contract. The OPSEC program shall be in accordance with National Security Decision Directive (NSDD) 298 and DoD 5205.02-M, and at a minimum shall include:

1) Assignment of responsibility for OPSEC direction and implementation.

2) Issuance of procedures and planning guidance for the use of OPSEC techniques to identify vulnerabilities and apply applicable countermeasures.

3) Establishment of OPSEC education and awareness training.

4) Provisions for management, annual review, and evaluation of OPSEC programs.

5) Flow down of OPSEC requirements to subcontractors when applicable.

The Contractor is responsible for subcontractor implementation of the OPSEC program requirements for this contract and shall be guided by the Critical Information list.

4.0 ACRONYM LIST

EDSN Rolls-Royce Engineering Department Numbering System

OPSEC Operational Security PHS&T Packaging, Handling, Storage and Transportation SDD Systems Development and Demonstration THO Rolls-Royce Technical Home Office Letters TYCOM Type Commander image1.emf