P03 1132134 Specs rev1_Truck Bed TX.pdf
PDF 59 KB Posted
- Attached to
- Purchase and Install Truck Flat Beds Federal contract opportunity
- Solicitation number
- 12FPC324Q0077
About this file
This document is a product specification for the purchase and installation of truck bed units on seven 2024 RAM Single Wheel Long Wheelbase trucks and three 2024 RAM Cab & Chassis Single Wheel trucks. The required truck bed units are CM brand RD model or equal, with specific dimensions, features, and requirements.
The contract requires the successful contractor to purchase and install the truck beds at their own facility within 3-5 months of contract award. As the new trucks arrive at the USDA's locations, the USDA technical point of contact will coordinate with the contractor to schedule delivery of the trucks for the bed installation. Upon completion, the contractor will coordinate with the USDA technical point of contact. This contract opportunity is being issued by the USDA's Farm Production and Conservation division, with Solicitation Number 12FPC324Q0077.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| S01 Combined Synopsis 12FPC324Q0077 8Jul24.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Product Description (Brand Name or Equal)
Purchase and install seven (7) flat beds on 2024 RAM Single Wheel Long Wheelbase. Flat beds are long bed CM brand (model RD beds (or equal) (Length 102" x Width 84" 42"Runners). Beds shall have a gooseneck hitch (GN) and wiring for a gooseneck in the hitch box.
Purchase and install three (3) flat beds on 2024 RAM Cab & Chassis Single Wheel. Flat beds are long bed CM brand model RD beds (or equal) (Length 112" x Width 84", 34" Runners for 60" Cab to Axle). Beds shall have a gooseneck hitch (GN) and wiring for a gooseneck in the hitch box.
This is a brand name or equal product description.
CM TRUCK BEDS RD Steel Flat Deck Body
Salient characteristics that an equal product must meet are listed below.
Specs & Features
Seven (7)
LENGTH 102”
WIDTH 84”
RUNNERS 42”
HEADACHE RACK Steel Tube DECK 1/8" Treadplate FRAME RAILS 4" Structural Channel Steel CROSSMEMBERS 3" x 3/16" Channel REAR SKIRT Solid One Piece with Tapered Corners GN HITCH 30K B&W Hitch with Welded Ball BP HITCH 24K B&W 2 ½” receiver hitch with receiver tube FUEL FILL Angled 12V TRAILER PLUG 12V Round 7 Pin in GN Box, Round 7 Pin/4 Way Flat on Rear REAR LIGHTING Clear LED Oval LIGHT BOX (REAR SKIRT) Steel MARKER LIGHTING Bullet DOT Approved LED
Three (3)
LENGTH 112”
WIDTH 84”
RUNNERS 34”
CAB TO AXLE 60”
HEADACHE RACK Steel Tube DECK 1/8" Treadplate FRAME RAILS 4" Structural Channel Steel CROSSMEMBERS 3" x 3/16" Channel REAR SKIRT Solid One Piece with Tapered Corners GN HITCH 30K B&W Hitch with Welded Ball
BP HITCH 24K B&W 2 ½” receiver hitch with receiver tube FUEL FILL Angled 12V TRAILER PLUG 12V Round 7 Pin in GN Box, Round 7 Pin/4 Way Flat on Rear REAR LIGHTING Clear LED Oval LIGHT BOX (REAR SKIRT) Steel MARKER LIGHTING Bullet DOT Approved LED
Delivery and Installation of Truck beds
The Contractor shall complete this project in approximately 3 – 5 months after the issuance of the contract award has been submitted to the Contractor.
The Contractor shall purchase and install the truck beds at their place of business. Once the contract has been awarded, the contractor shall coordinate with the USDA technical point of contact for the delivery of the trucks to the contractor location for installation of the truck beds.
NOTE: Not all the trucks needing beds are currently on hand. As the new trucks arrive at USDA Region, the USDA technical point of contact will coordinate with the contractor to schedule delivery of the truck for the truck bed installation. Upon completion of the installation of the truck beds, the contractor shall coordinate with the USDA technical point of contact.
File details come from the government source that posted it. Updated .