C04b Performance Work Statement 1284LM27Q0012.docx

DOCX document 27 KB Posted

Download DOCX, 27 KB

Attached to
USDA Forest Service Dakota Skipper Habitat Survey and Mapping
Solicitation number
1284LM27Q0012
Issued by

About this file

This is a Performance Work Statement for USDA Forest Service Solicitation 1284LM27Q0012, a small business set-aside Request for Quote for Dakota Skipper habitat survey and mapping services within the McKenzie Ranger District on the Little Missouri National Grassland in McKenzie County, North Dakota. The project involves surveying approximately 80,000 acres across designated township and range sections to identify and map suitable Dakota Skipper butterfly habitat based on the presence of requisite native grass and forb species. The contractor must use desktop analysis employing ArcGIS, LiDAR, satellite imagery, and other tools to identify potential habitat areas and eliminate unsuitable terrain, then conduct field surveys to map habitat perimeters by walking boundaries and recording GPS coordinates of polygons as small as one square meter, supported by photographic documentation. Drones are expressly prohibited for all contract work.

The field season runs from May 15, 2027, through September 30, 2027, with work completed during the appropriate phenological window to identify requisite plants. The contractor must submit a survey plan prior to field work, monthly progress reports via email to the Contracting Officer Representative, GPS polygon files in UTM NAD83 format, and a professional final report in Microsoft Word or PDF format. The draft report is due by November 30, 2027, with Forest Service comments returned by December 31, 2027, and the final report submitted by January 31, 2028. The government will provide access instructions and consider applications for off-road vehicle permits; the contractor must furnish all equipment, labor, materials, transportation, and lodging. All data and reports become property of the USDA Forest Service, with data publication prohibited without prior Forest Service consent. Questions must be directed to joanne.meiers@usda.gov no later than December 7, 2026.

View the file

Other files

File Type Posted
C04c Area Map 1284LM27Q0012.pdf PDF
C04a SF1449 CSS 1284LM27Q0012.pdf PDF
C04d Wage Determination 1284LM27Q0012.pdf PDF

On GovTribe

Work with this file

  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file

Text version

Solicitation 1284LM27Q0012 Performance Work Statement

Dakota skipper habitat mapping– Little Missouri National Grassland Project Location: The project location is within the McKenzie Ranger District in McKenzie County, North Dakota on the Little Missouri National Grassland (LMNG). Generally speaking, mapping will occur on National Grasslands parcels withinT147N R100W, T147N R101W, T146N R99W, T146N R100W, T146N R101W, T145N R99W, T145N R100W, T145N R101W; located east of the Little Missouri River, south of the North Unit of TRNP, west of Hwy 85, and north of the southern McKenzie County border. Please note that only portions of these areas contain suitable habitat for the Dakota Skipper; therefore, there is not an expectation that all 80,000 available acres are physically mapped for suitable habitat. Survey areas have been selected based on general awareness of the areas available suitable habitat paired with a need to identify specific locations within the survey boundaries. Quoters should plan to survey all potentially suitable habitat within the designated areas, regardless of the distance from the road, unless those areas are determined to not meet the criteria for suitable habitat based on desktop reconnaissance.

There are 3 non-motorized areas within the survey area. These areas can be accessed by the contractor with motorized vehicles under a site-specific off-road permit issued to the successful bidder if needed. Other areas off of existing roads that are open to motorized travel may also be accessed with an off-road permit.

GOVERNMENT-FURNISHED PROPERTY AND SERVICES

The Government will provide access instructions and consider application for off-road vehicle use if needed.

The Contractor must furnish all equipment, labor, materials (except government furnished items), transportation, lodging, supervision, and incidentals necessary to conduct the rare plant survey.

Data collected and reports prepared under this contract are the property of the USDA Forest Service. Data publication is prohibited without prior consent of the Forest Service and the Forest Service reserves the right to edit any potential publications. The Forest Service will be acknowledged in any publications using such data.

CONTRACTOR TASKS

1. Habitat Mapping

a. Use desktop analysis to identify areas of potential suitable habitat Using tools such as ArcGIS, Lidar, satellite images, and others as applicable, the successful applicant should identify areas within the survey boundaries that would not be considered suitable habitat by identifying things like rugged terrain, barriers to dispersal, and woody vegetation. The USFWS HAPET suitability model may also be used to determine likelihood of suitable habitat in a particular area, acknowledging that this model was designed to determine habitat suitability over a coarse area. The desktop analysis should be completed to determine areas to eliminate from surveys and prioritize areas for on-the-ground survey efforts.

NOTE: Drones may NOT be used for any portion of the contract

b. Identify presence of Requisite Plant Species Native grasses and native flowering forbs for larval and adult food and shelter, specifically: 1) One or more of the following native grasses to provide larval food and shelter: little bluestem (Schizachyrium scoparium), Prairie dropseed (Sporobolus heterolepis), needle-and-thread grass (Hesperostipa comata), Porcupine grass (Hesperostipa spartea)

2) One or more of the following forbs in bloom to provide nectar and water sources during the flight period: Purple coneflower (Echinacea angustifolia), bluebell bellflower (aka harebell, Campanula rotundifolia), white prairie clover (Dalea candida), upright prairie coneflower (aka yellow coneflower, Ratibida columnifera),fleabane (Erigeron spp.), blanket flower (Gaillardia spp., including common gaillardia G. aristata), black-eyed Susan (Rudbeckia hirta), yellow sun drops (Calylophus serrulatus), prairie milkvetch (Astragalus adsurgens).

Site contains potential Dakota skipper habitat if both bullets below are met:

▪ If the % Type B Habitat dominant requisite species >50%

▪ Habitat contains > one of the requisite grass species and > one of the requisite forb species listed above The percent of species to calculate greater than 50% is based on percent cover of the species listed as requisite species in this document. These should be documented as ocular estimates of percent cover by area for each polygon.

In western North Dakota, Dakota skippers inhabit a variant of ‘Type B’ habitats on rolling terrain over gravelly glacial moraine dominated by most commonly by little bluestem (Schizachyrium scoparium), as well as big bluestem, needlegrasses, or porcupine grasses (Hesperostipa spp.) (Royer et al. 2008). Western wheatgrass (Pascopyrum smithii) is also typical of a variant of ‘Type B’ habitat in western North Dakota (Royer et al. 2014).These habitats are often invaded by Kentucky bluegrass (Poa pratensis) (Royer and Marrone 1992). More information regarding Habitat types can be found in the 2026 Dakota Prairie Grasslands Biological Survey and Reporting Guidelines. https://www.fs.usda.gov/sites/nfs/files/r01/dpg/publication/2026%20Biological%20Survey%20and%20Reporting%20Guidelines.pdf

c. Mapping the perimeter of habitat When areas with requisite plant species are identified to meet abundance specifications above, surveyor should then map the habitat by walking the perimeter, determined based on continuity of requisite plant species/advance of non-requisite species, and any limiting factors to dispersal, including topography, woody vegetation, extensive crop fields, etc. While walking the perimeter of suitable habitat patches, record GPS to create a polygon feature. A data dictionary and specific map areas will be provided.

The contractor is expected to complete desktop reconnaissance of the entire provided area to determine non-suitable habitat. Once in the field, habitat surveys should be based on ocular field observations collected by mapping the perimeter of suitable habitat polygons. Quantifiable surveys are not required, but determination of suitable habitat should be supported with photos. There is no need to examine or document areas that are not potential habitat. Quantitative sampling effort is not required for this survey mapping. Habitat polygons should be identified, mapped, and supported with photos.

Mapping should be completed at a fine scale to include patches as small as 1 sq meter. If small patches are in proximity with each other without barriers to dispersal, they should be mapped together to show connectivity.

d. Record the incidental observation of any rare or TES or RFSS pollinators including Dakota Skipper using a Global Positioning System (GPS). GPS coordinates will be stored in UTM, NAD83. Photos should be taken to document occurrences.

DELIVERABLES

1. Survey Plan

Prior to doing field surveys, provide the COR with a survey plan and identify and provide rationale for any areas eliminated from on-the-ground survey efforts after desktop reconnaissance is completed (see Contractor Task 1.a.). After the field season start date, the contractor shall provide monthly reports in the form of e-mail addressed to the Contracting Officer Representative and District Contact. At a minimum, these monthly reports shall include a description of where, how, and when surveys were conducted, and any problems encountered.

2. GPS Files of Mapped Habitat GPS polygon files in UTM, NAD83 format

3. Final summary Report The contractor must submit a report summarizing the results of the field survey. The report must be in Microsoft Word, will accept PDF in addition to Word. No hard copy reports are needed. The final report shall meet professional standards and shall be subject to review by the COR. If the report does not meet professional standards, the contractor may be required to edit or resubmit the final report.

Final report must include:

1. An introduction summarizing the purpose of this project.

2. A description of the survey areas, methods, and techniques used.

3. Summary of rare, TES & RFSS Pollinator species observed

SCHEDULE

The field season for this project is defined as the period from May 15, 2027, through September 30, 2027. Work shall be completed during the appropriate phenological window to accurately identify the requisite plants. NOTE: Surveys are not required to be completed during the Dakota Skipper Flight period. Observations for pollinators are incidental observations, not official occupancy data.

By November 30, 2027, the contractor shall submit to the Contracting Officer Representative (COR) a draft report for review. The Forest Service shall return comments on the draft report by December 31, 2027. The contractor will submit the final report in electronic format (Word or PDF), by January 31, 2028.

File details come from the government source that posted it. Updated .