1284LM24Q0120 BNF UTILITY BED BUILD UP.pdf

SEE ADDENDUMIS CHECKED

CODE 18a. PAYMENT WILL BE MADE BY

CODE

FACILITYCODE

17b. CHECK IF REMITTANCE IS DIFFERENT AND PUT SUCH ADDRESS IN OFFER

OFFEROR

84LM

OGDEN UT 84401-2310

324 25TH ST

USDA-FS CSA INTERMOUNTAIN 2

0351 CODE 16. ADMINISTERED BYCODE

X

X

X

336211

SIZE STANDARD:

100.00 % FOR:SET ASIDE:UNRESTRICTED OR84LM

REQUEST FOR

PROPOSAL

(RFP)

INVITATION

FOR BID (IFB)

10. THIS ACQUISITION ISCODE

REQUEST FOR

QUOTE (RFQ)

14. METHOD OF SOLICITATION

13b. RATING

NORTH AMERICAN INDUSTRY

CLASSIFICATION STANDARD

(NAICS):

SMALL BUSINESS

08/28/2024 1000 MD

08/15/2024

BRENDA DWYER

(No collect calls)

INFORMATION CALL:

FOR SOLICITATION 8. OFFER DUE DATE/LOCAL TIMEb. TELEPHONE NUMBERa. NAME

4. ORDER NUMBER3. AWARD/ 6. SOLICITATION

1284LM24Q0120

5. SOLICITATION NUMBER

SOLICITATION/CONTRACT/ORDER FOR COMMERCIAL ITEMS 1. REQUISITION NUMBER PAGE OF

1 23 1136061OFFEROR TO COMPLETE BLOCKS 12, 17, 23, 24, & 30

TELEPHONE NO.

17a. CONTRACTOR/

HAMILTON MT 59840

1801 NORTH 1ST STREET

BITTERROOT NATIONAL FOREST

15. DELIVER TO

OGDEN UT 84401-2310

324 25TH ST

9. ISSUED BY

7.

2. CONTRACT NO.

EFFECTIVE DATE

1,000

18b. SUBMIT INVOICES TO ADDRESS SHOWN IN BLOCK 18a UNLESS BLOCK BELOW

ISSUE DATE

DELIVERY FOR FREE ON BOARD

(FOB) DESTINATION UNLESS

BLOCK IS MARKED

11.

SEE SCHEDULEX

12. DISCOUNT TERMS THIS CONTRACT IS A RATED

ORDER UNDER THE DEFENSE

PRIORITIES AND ALLOCATIONS

SYSTEM - DPAS (15 CFR 700)

13a.

SERVICE-DISABLED

VETERAN-OWNED

SMALL BUSINESS

(SDVOSB)

HUBZONE SMALL

BUSINESS

8(A)

USDA-FS CSA INTERMOUNTAIN 2

WOMEN-OWNED SMALL

BUSINESS (WOSB)

ECONOMICALLY DISADVANTAGED

WOMEN-OWNED SMALL

BUSINESS (EDWOSB)

24.

AMOUNT

23.

UNIT PRICE

22.

UNIT

21.

QUANTITY

20.

SCHEDULE OF SUPPLIES/SERVICES

19.

ITEM NO.

Bitterroot National Forest

Delivery: 12/31/2024

0001 EN 0103-4148 BUILDUP SERVICES OF UTILITY BODY. 1 EA

See attached for details.

(Use Reverse and/or Attach Additional Sheets as Necessary)

HEREIN, IS ACCEPTED AS TO ITEMS:

X

XX

DATED . YOUR OFFER ON SOLICITATION (BLOCK 5),

INCLUDING ANY ADDITIONS OR CHANGES WHICH ARE SET FORTH

COPIES TO ISSUING OFFICE. CONTRACTOR AGREES TO FURNISH AND DELIVER

ARE

ARE

31c. DATE SIGNED

27b. CONTRACT/PURCHASE ORDER INCORPORATES BY REFERENCE FAR 52.212-4. FAR 52.212-5 IS ATTACHED. ADDENDA

31a. UNITED STATES OF AMERICA (SIGNATURE OF CONTRACTING OFFICER)

30c. DATE SIGNED 31b. NAME OF CONTRACTING OFFICER (Type or print)

ALL ITEMS SET FORTH OR OTHERWISE IDENTIFIED ABOVE AND ON ANY ADDITIONAL

SHEETS SUBJECT TO THE TERMS AND CONDITIONS SPECIFIED.

27a. SOLICITATION INCORPORATES BY REFERENCE (FEDERAL ACQUISITION REGULATION) FAR 52.212-1, 52.212-4. FAR 52.212-3

AND 52.212-5 ARE ATTACHED. ADDENDA

26. TOTAL AWARD AMOUNT (For Government Use Only)

OFFER

STANDARD FORM 1449 (REV. 11/2021)

Prescribed by GSA - FAR (48 CFR) 53.212

ARE NOT ATTACHED.

ARE NOT ATTACHED.

AUTHORIZED FOR LOCAL REPRODUCTION

PREVIOUS EDITION IS NOT USABLE

30b. NAME AND TITLE OF SIGNER (Type or print)

30a. SIGNATURE OF OFFEROR/CONTRACTOR

28. CONTRACTOR IS REQUIRED TO SIGN THIS DOCUMENT AND RETURN

25. ACCOUNTING AND APPROPRIATION DATA

29. AWARD OF CONTRACT: REFERENCE

32e. MAILING ADDRESS OF AUTHORIZED GOVERNMENT REPRESENTATIVE

32c. DATE 32b. SIGNATURE OF AUTHORIZED GOVERNMENT REPRESENTATIVE

ACCEPTED, AND CONFORMS TO THE CONTRACT, EXCEPT AS NOTED:

32a. QUANTITY IN COLUMN 21 HAS BEEN

RECEIVED INSPECTED

40. PAID BY39. S/R VOUCHER NUMBER38. S/R ACCOUNT NUMBER

37. CHECK NUMBER

FINALPARTIAL

36. PAYMENT

FINALPARTIAL

35. AMOUNT VERIFIED

CORRECT FOR

34. VOUCHER NUMBER33. SHIP NUMBER

COMPLETE

32g. E-MAIL OF AUTHORIZED GOVERNMENT REPRESENTATIVE

42d. TOTAL CONTAINERS42c. DATE REC'D (YY/MM/DD)

42b. RECEIVED AT (Location)

42a. RECEIVED BY (Print)

41c. DATE41b. SIGNATURE AND TITLE OF CERTIFYING OFFICER

41a. I CERTIFY THIS ACCOUNT IS CORRECT AND PROPER FOR PAYMENT

STANDARD FORM 1449 (REV. 11/2021) BACK

24.

AMOUNT

23.

UNIT PRICE

22.

UNIT

21.

QUANTITY

20.

SCHEDULE OF SUPPLIES/SERVICES

19.

ITEM NO.

32f. TELEPHONE NUMBER OF AUTHORIZED GOVERNMENT REPRESENTATIVE

32d. PRINTED NAME AND TITLE OF AUTHORIZED GOVERNMENT REPRESENTATIVE

23 2 of

Solicitation Number: 1284LM24Q0120

(i) This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in subpart 12.6 of the Federal Acquisition Regulation (FAR), as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; proposals are being requested and a written solicitation will not be issued.

(ii) This solicitation is issued as a Request for Quotation (RFQ).

(iii) The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2024-05.

(iv) This procurement is set aside for SMALL BUSINESS. The NAICS code is 336211.

(v) Schedule of Items/Price Schedule

Project Description: Fabrication and Installation of Utility Body for asset EN 0103-4148

Vendor Name: __________________________________Vendor UEI:___________________

Item Supplies/Services Qty Unit of

Issue Unit Price Total Price

0001 Purchase and Installation of Utility body for 2024 Ford F-350 Cab &

Chassis EN0103-4148

1 EA $ $

Total Price $

Schedule Notes:

a) Total Price includes delivery and installation costs.

b) One award will be made from this solicitation; contractors must submit pricing for all items.

(vi) Description of Requirement (including a list of any attachments)

Purchase and installation of a custom utility body for a 2024 Ford F-350 Cab and Chassis, white

(VIN1FD8W3HN4RED64999) in accordance with minimum required specifications below:

UTIL Bed with Superstructure

Bed Length 105-108”

Bed Height min 40”

Compartment Depth 19-21”

Cargo Floor width Min 54”

Rear Door Width Opening Minimum of 48”

Superstructure Width same as bed

Superstructure Height 67-69” overall from Bed

Utility bed painted white to match existing cab

Heavy duty bumper with Hitch Recess

Class IV Hitch compatible with supplied bumper

All Delete/Install kits pertinent to specific Utility Body, Cab, & Chassis

Full LED lighting for Brake, Turn, Running, Rev, Side markers. Internal lighting with switches near the entry point. 1ea flood/work light at rear & both sides.

HD Mudflaps mounted & secured so the exhaust will not be impeded or melt the flaps

Dual port trailer plug (7-Round RV Blade & 4-Flat)

Backup Camera with 7” minimum screen

Labor to include complete installation of Util body, electrical, & camera with screen.

Similar utility bodies that provide the durability & reliability and standardization within the

Helitack Programs across the region is the Knapheide Bodies.

General Requirements: Bed shall be fully complete and ready to use with all accessories installed as described in the technical specifications. Manufacturer’s heavy-duty utility bed shall be furnished. Bed shall be of welded, unitized, galvanic steel construction. All materials, parts and assemblies shall be new and of current manufacture. Workmanship, fabrication, and assembly shall be of the highest quality and in conformance with standard manufacturing practices.

Understructure: Full width cross sills shall be at least 7 gauge preformed structural steel tube 2-inch by 4-inch or 4-inch, 5.4-pound structural steel channel. Provide two full width cross sills.

One cross sill shall be located forward of the rear wheel, and one shall be located behind the rear wheel. Support shall be provided at the front of the body by a full width cross member or the front box header. If the front box header is to support the front of the body it shall extend the full width of the body, the full height of the compartments or to the bottom of the vehicles rear window and securely attached to the inner and outer front corners of the compartments. Support at the rear of the body can be provided by a full width cross member or the rear bumper if attached the full width of the body. The floor shall be adequately supported to prevent sagging under heavy use. The floor shall be supported by minimum 14-gauge preformed channel 1/2-inch by 3-inch or 3-inch structural steel channel on a maximum of 16-inch centers.

Panels: Exterior panels shall be fabricated from mar-clad galvanized steel with a minimum material thickness of 14-gauge. The front box header shall have a minimum thickness of 14-gauge. Interior panels shall be fabricated from mar-clad galvanized steel with a minimum material thickness of 14-gauge.

Compartments: Body style shall be one style on the curb side and a different style on the street side. On the curb side, the style shall consist of one full height vertical compartment ahead of the wheel, one horizontal compartment extending over the wheel from the front vertical compartment to the rear of the body, and a vertical compartment below the horizontal compartment behind the wheel. On the street side, the style shall consist of one full height vertical compartment ahead and behind the wheel. A horizontal compartment shall be above the wheel between the vertical compartments. Compartments shall be accessible only from the exterior side of the bed. There shall be adjustable shelves in all compartments. Shelves shall be minimum 14-gauge galvanized steel with 14-gauge dividers. Bed compartments shall be fully enclosed and weather and dust tight, except rearmost streetside compartment which must have a

3” to 5” stainless steel louvered vent installed in the rear of the compartment within 3” of compartment top.

Compartment Doors: All doors shall be double paneled, mar-clad galvanized steel, with material thickness not thinner than 20-gauge on the outer panel and 20-gauge on the inner panel.

Doors shall be properly aligned and suitably reinforced for rigidity. Doors shall have a continuous hinge. Folding stainless steel hinges are acceptable. The door hinge rod shall be a full-length stainless-steel rod with a minimum diameter of 5/16 inches and have nylon bushings at all hinges and replaceable hinge blocks. Vertical opening doors shall be equipped with a spring-loaded or pneumatic door closer. Each horizontal opening door on both sides shall have one limit chain at each end of the door to hold it horizontally open. Horizontal doors shall have a chain and shall be able to drop flat on the bed against bumper stops. Limit chains shall be anti-rattle. Door latches shall be rotary style with easy open handles (not T handles). All latch mechanisms shall be stainless steel and protected from damage by an interior cover. Strikers shall be adjustable to ensure a weathertight fit. All doors shall be individually locked and keyed alike with non-corrosive cylinders. A minimum of 4 keys shall be furnished with each bed. A neoprene moisture and dust strip with minimum dimensions of 3/8-inch wide X 1/8-inch thick shall be attached to the inside face of the door or compartment. The seal shall be applied after the finish coat of paint has thoroughly dried.

Superstructure: Shall comply with measurements listed on page 1. There shall be no windows in the superstructure panels or doors except for one bulkhead window to allow visibility between cab and bed. The window shall have a metal screen or cage installed inside the cargo compartment to protect the window from breakage. There shall be vertical double entry doors on the rear of the superstructure with gas struts to hold them open. Doors shall be double paneled, mar-clad galvanized steel, with material thickness not thinner than 20-gauge on the outer panel and 20-gauge on the inner panel. There shall be 2 side access doors on each side of the superstructure (total of 4) with a minimum door size of 16” high by 40” wide and gas struts to hold them open. All door latches shall be rotary style with easy open handles (not T handles).

All latch mechanisms shall be stainless steel and protected from damage by an interior cover.

Strikers shall be adjustable to ensure a weathertight fit. Unless not possible, do not include the rear conduit chute or other auxiliary doors.

Rock Shields: The front corners of the bed, which extend beyond the cab, shall be covered full height with unpainted aluminum diamond deck, it shall be installed after the bed is painted and held in place with rivets.

Mud Flaps: Provide 3/8-inch-thick rubber mud flaps on the rear of bed. Mud flaps shall be a maximum of 10 inches from the ground and comply with height and width requirements. There shall be enough clearance between the mud flaps and the tire to prevent the mud flaps from being caught between the tire and a large pothole when backing. Mud flaps shall not touch the exhaust pipe at any time during normal vehicle use.

Exhaust Tail Pipe: The exhaust tailpipe shall be even with or beyond the outside edge of the bed not including the bumper. If an extension is necessary, it shall be made from the same grade of material as the existing tailpipe and fastened by welds.

Rear Bumper: The rear bumper shall be the heavy-duty straight type with lowered center step and with a non-slip safety tread pattern (diamond plate) on the horizontal surfaces. Material thickness shall not be less than 12-gauge. The rear face of the body directly above the bumper shall be protected by a minimum 4-inch-high kick plate. The kick plate and bumper may be black.

Trailer Hitch: Reuse existing OEM hitch receiver. If not possible then, a minimum class IV hitch shall be installed so that the receiver is flush with the rear bumper. A 7-pin (flat or blade pins) RV connector shall be wired and solidly mounted in an appropriate location near the hitch.

Wiring and Electrical: Electrical connections shall be mechanically secure, bolted, crimped, or soldered. All parts of the electrical system shall be protected against corrosion and mechanical wear. Grommets shall be used where wires pass through metal. Wiring shall be kept a minimum of 4 inches away from fuel systems and exhaust systems. Wiring shall be encased in plastic wire loom or metal tubing and clipped at no more than 18-inch intervals to prevent rubbing or chafing. Crimped or soldered connections shall be sealed with silicone dielectric compound or equivalent. All connections shall be protected with heat shrink insulation. Wiring shall be protected by a split plastic loom and minimal wiring shall be inside the bed compartments. Wiring that is inside the compartments shall be secured on no more than 6-inch centers and routed in the comers and ceiling. No wiring shall be located against the compartment floors.

Lights: The body shall be supplied with all lights, reflectors, and wiring required for a complete and finished unit. Lights and reflectors shall meet Federal Motor Vehicle Safety Standard 108. A rubber-mounted backup light and a combination stop, tail, and directional light shall be flush mounted on the rear of the body on each side. Space for a license plate shall be provided below the tail and backup light on the driver’s side with a light above it is reflecting down onto the plate area. Clearance lights and reflectors shall conform to US DOT Standards. Forward most clearance lights on the body shall be mounted on the side of the body rather than on the front and positioned where they will not shine in the rear-view mirrors.

Painting: Components shall be painted to match the manufactures color code of the vehicle delivered; except for the rear bumper it can be black. Prior to painting, all metal surfaces shall be cleaned of rust, grease, weld slag and splatter, and other foreign material. All edges shall be deburred and free of sharp edges. Bodies with steel floors shall have the understructure and underside of the floor completely sealed with a heavy coat of protective petroleum or oil-based undercoating. Fuel filler caps and plastic fuel filler bezels shall not be painted. Bed shall be warrantied against rust-through for a minimum of 6 years.

Installation: The bed shall be designed by the bed manufacturer for the vehicle it is being installed on using off-road body mounting. There shall be no welding on the frame ahead of the rearmost spring hangers. There shall be no drilling or grinding on frame flanges ahead of the rearmost spring hangers. Mounting bolts shall be minimum of 1/2-inch Grade 5 with flat washers and self-locking nuts. Provide a minimum of six mounting points, two in the front outboard, two in the middle, and two in the rear outboard. The middle mounting point shall be attached to the bed, but only rest on the vehicle’s frame so it transfers only the vertical load. Provide a minimum of two crash restraint barriers to prevent forward movement of the bed. Clearance between cab and bed shall be a minimum of 1 inch and a maximum of 3 inches. Tire Chain

Clearance - minimum vertical clearance shall be equal to maximum suspension travel plus 2 inches. Maximum suspension travel will be the distance between the axle and the rubber bumper on the frame plus 1 inch. Minimum horizontal clearance shall be 3 inches on the inside of the wheel wells and 2 inches on the outside of the wheel wells. It is not acceptable to extend the outer edges of the wheel wells beyond the width of the compartments. Gas tank filler shall be mounted in accordance with Federal Motor Vehicle Safety Standard (FMVSS) 301. There shall be no kinks nor restrictions in the hose between the tank and filler connection, so that fuel station pumps do not shut off until the tank is full, and if closer than 12 inches to the rear tire, have a shield made of minimum 14-gauge steel to protect it from objects thrown by the rear tire.

Minimum clearance between the filler hose and rear tire, with any amount of suspension travel, shall be 6 inches.

The final product shall be a complete, fully operational, and certified vehicle. After installation of the bed and allied equipment, the Contractor shall certify the entire vehicle and place any required sticker on the vehicle (final stage certification label). The label will show the manufacturer’s name, date, weight information, and verification that no Federal Motor Vehicle

Safety Standards have been altered.

ADDITIONAL EQUIPMENT TO BE INSTALLED

Backup alarms: Reuse existing equipment on the vehicle if equipped. If not equipped, install a new alarm.

Backup Camera: Reuse existing equipment on the vehicle if equipped or if supplied install/mount camera.

Tie-down rings: A minimum of 6 wall-mounted, protruding no more than 1” and positioned with one in each corner and two in the middle (one on each side). All must be within 1” of the bed floor. Rated at 2,000 lbs each.

Bedliner: Must be applied by spray to the utility body cargo area sides and floor excluding the superstructure.

Additional Lighting: All lights should be LED. Must have two dome lights mounted to the ceiling with a single switch inside the cargo area near the rear doors. Must have five work lights installed with two on each side and one on the rear of the superstructure. Work lights should be near flush with the body and be angled toward the ground, Lights cannot be taller than the top of the superstructure. A lighted power switch should be located inside the truck cab.

Equipment hooks: Adjustable hook system on both sides of bed inside cargo compartment mounted as high as possible. Provide a minimum of 10 hooks suitable for hanging packs weighing 60 lbs. Hooks shall not be larger than 2” in size. Hooks shall fold to the side when not in.

Grab Handles: None unless automatically included.

Spare tire mount: None if the tire is mounted under the vehicle with an OEM mount. If not, then install a vertical mount on the inside of the bed at the front.

(vii) Date(s) and Place(s) of Delivery and Acceptance/Location

Government will deliver and pick up the vehicle at a service facility within 275 miles from

Hamilton, MT. Installation to be completed by 12/31/2024.

(viii) FAR 52.212-1 Instructions to Offerors – Commercial Products and Commercial

Services (SEP 2023) (Provision)

Addenda to provision FAR 52.212-1:

1) Offerors must have an active entity registration in the System for Award Management in order to submit an offer. https://www.sam.gov/SAM/

2) Offers submitted in response to this solicitation shall include a technical proposal, a price proposal, and contractor representations and certifications.

a) Price Proposal – Include the following: 1) the completed Schedule of Items from Section B of this solicitation, and 2) acknowledgement of any amendments to this solicitation by following the instructions that accompany the amendment(s).

(b) Technical Proposal- 1) Provide detailed description of product(s) that demonstrate that the minimum specifications have been met. 2) Provide Estimated date of Installation 3)

Provide facility address and POC to complete installation within 275 miles from Hamilton

MT.

c) Representations and Certifications – Fill in the check boxes for provisions FAR 52.204-26, FAR 52.204-24, and FAR 52.212-3, found in paragraph(x) of this solicitation and include a copy with your offer.

3) Submit offer by email to Brenda Dwyer at Brenda.dwyer@usda.gov so that it is delivered into this inbox by 10AM MT ON 8/28/2024. It is the offerors responsibility to confirm receipt of the offer.

4) Address questions about this solicitation to Brenda Dwyer at Brenda.dwyer@usda.gov.

Please submit your questions in writing at least 5 days prior to the closing date to allow adequate time to review and respond. Any questions submitted less than the number of days stated above may not be responded to by the Government.

(End of provision)

(ix) FAR 52.212-2 Evaluation – Commercial Products and Commercial Services (NOV

2021) (Provision)

(a) The Government will award a contract resulting from this solicitation to the lowest priced offeror whose offer conforms to the solicitation and will be the most advantageous to the

Government, price and other factors considered. The following factors shall be used to evaluate offers: price, acceptability of proposed product, installation schedule of product and location of facility

(b) A written notice of award or acceptance of an offer, mailed or otherwise furnished to the successful offeror within the time for acceptance specified in the offer, shall result in a binding contract without further action by either party. Before the offer’s specified expiration time, the Government may accept an offer (or part of an offer), whether or not there are negotiations after its receipt, unless a written notice of withdrawal is received before award.

(End of provision) https://www.sam.gov/SAM/

(x) Representations and Certifications (complete highlighted items in this section and return with your offer)

VENDOR NAME: _____________________________________________

VENDOR UEI: _____________________________________________

FAR 52.204-26 Covered Telecommunications Equipment or Services-Representation (OCT

2020) (Provision)

(a) Definitions. As used in this provision, "covered telecommunications equipment or services" and "reasonable inquiry" have the meaning provided in the clause FAR 52.204-25, Prohibition on Contracting for Certain Telecommunications and Video Surveillance Services or Equipment.

(b) Procedures. The Offeror shall review the list of excluded parties in the System for Award

Management (SAM) (https://www.sam.gov) for entities excluded from receiving federal awards for "covered telecommunications equipment or services".

(c) (1) Representation. The Offeror represents that it □ does, □ does not provide covered telecommunications equipment or services as a part of its offered products or services to the

Government in the performance of any contract, subcontract, or other contractual instrument.

(2) After conducting a reasonable inquiry for purposes of this representation, the offeror represents that it □ does, □ does not use covered telecommunications equipment or services, or any equipment, system, or service that uses covered telecommunications equipment or services.

(End of provision)

FAR 52.204-24 Representation Regarding Certain Telecommunications and Video

Surveillance Services or Equipment (NOV 2021) (Provision)

The Offeror shall not complete the representation at paragraph (d)(1) of this provision if the

Offeror has represented that it "does not provide covered telecommunications equipment or services as a part of its offered products or services to the Government in the performance of any contract, subcontract, or other contractual instrument" in paragraph (c)(1) in the provision at FAR 52.204-26, Covered Telecommunications Equipment or Services—Representation, or in paragraph (v)(2)(i) of the provision at FAR 52.212-3, Offeror Representations and Certifications-

Commercial Products or Commercial Services. The Offeror shall not complete the representation in paragraph (d)(2) of this provision if the Offeror has represented that it "does not use covered telecommunications equipment or services, or any equipment, system, or service that uses covered telecommunications equipment or services" in paragraph (c)(2) of the provision at FAR

52.204-26, or in paragraph (v)(2)(ii) of the provision at FAR 52.212-3.

(a) Definitions. As used in this provision—

Backhaul, covered telecommunications equipment or services, critical technology, interconnection arrangements, reasonable inquiry, roaming, and substantial or essential https://www.acquisition.gov/far/52.204-25#FAR_52_204_25 https://www.sam.gov/ https://www.acquisition.gov/far/52.204-26#FAR_52_204_26 https://www.acquisition.gov/far/52.212-3#FAR_52_212_3 https://www.acquisition.gov/far/52.204-26#FAR_52_204_26 https://www.acquisition.gov/far/52.204-26#FAR_52_204_26 https://www.acquisition.gov/far/52.212-3#FAR_52_212_3 component have the meanings provided in the clause FAR 52.204-25, Prohibition on

Contracting for Certain Telecommunications and Video Surveillance Services or Equipment.

(b) Prohibition. (1) Section 889(a)(1)(A) of the John S. McCain National Defense

Authorization Act for Fiscal Year 2019 (Pub. L. 115-232) prohibits the head of an executive agency on or after August 13, 2019, from procuring or obtaining, or extending or renewing a contract to procure or obtain, any equipment, system, or service that uses covered telecommunications equipment or services as a substantial or essential component of any system, or as critical technology as part of any system. Nothing in the prohibition shall be construed to—

(i) Prohibit the head of an executive agency from procuring with an entity to provide a service that connects to the facilities of a third-party, such as backhaul, roaming, or interconnection arrangements; or

(ii) Cover telecommunications equipment that cannot route or redirect user data traffic or cannot permit visibility into any user data or packets that such equipment transmits or otherwise handles.

(2) Section 889(a)(1)(B) of the John S. McCain National Defense Authorization Act for

Fiscal Year 2019 (Pub. L. 115-232) prohibits the head of an executive agency on or after

August 13, 2020, from entering into a contract or extending or renewing a contract with an entity that uses any equipment, system, or service that uses covered telecommunications equipment or services as a substantial or essential component of any system, or as critical technology as part of any system. This prohibition applies to the use of covered telecommunications equipment or services, regardless of whether that use is in performance of work under a Federal contract. Nothing in the prohibition shall be construed to—

(i) Prohibit the head of an executive agency from procuring with an entity to provide a service that connects to the facilities of a third-party, such as backhaul, roaming, or interconnection arrangements; or

(ii) Cover telecommunications equipment that cannot route or redirect user data traffic or cannot permit visibility into any user data or packets that such equipment transmits or otherwise handles.

(c) Procedures. The Offeror shall review the list of excluded parties in the System for Award

Management (SAM) ( https://www.sam.gov) for entities excluded from receiving federal awards for "covered telecommunications equipment or services".

(d) Representation. The Offeror represents that—

(1) It ☐ will, ☐ will not provide covered telecommunications equipment or services to the

Government in the performance of any contract, subcontract or other contractual instrument resulting from this solicitation. The Offeror shall provide the additional disclosure information required at paragraph (e)(1) of this section if the Offeror responds

"will" in paragraph (d)(1) of this section; and

(2) After conducting a reasonable inquiry, for purposes of this representation, the Offeror represents that— https://www.acquisition.gov/far/52.204-25#FAR_52_204_25 https://www.sam.gov/

It ☐ does, ☐ does not use covered telecommunications equipment or services, or use any equipment, system, or service that uses covered telecommunications equipment or services. The Offeror shall provide the additional disclosure information required at paragraph (e)(2) of this section if the Offeror responds "does" in paragraph (d)(2) of this section.

(e) Disclosures. (1) Disclosure for the representation in paragraph (d)(1) of this provision. If the Offeror has responded "will" in the representation in paragraph (d)(1) of this provision, the Offeror shall provide the following information as part of the offer:

(i) For covered equipment—

(A) The entity that produced the covered telecommunications equipment (include entity name, unique entity identifier, CAGE code, and whether the entity was the original equipment manufacturer (OEM) or a distributor, if known);

(B) A description of all covered telecommunications equipment offered (include brand; model number, such as OEM number, manufacturer part number, or wholesaler number; and item description, as applicable); and

(C) Explanation of the proposed use of covered telecommunications equipment and any factors relevant to determining if such use would be permissible under the prohibition in paragraph (b)(1) of this provision.

(ii) For covered services—

(A) If the service is related to item maintenance: A description of all covered telecommunications services offered (include on the item being maintained:

Brand; model number, such as OEM number, manufacturer part number, or wholesaler number; and item description, as applicable); or

(B) If not associated with maintenance, the Product Service Code (PSC) of the service being provided; and explanation of the proposed use of covered telecommunications services and any factors relevant to determining if such use would be permissible under the prohibition in paragraph (b)(1) of this provision.

(2) Disclosure for the representation in paragraph (d)(2) of this provision. If the Offeror has responded "does" in the representation in paragraph (d)(2) of this provision, the

Offeror shall provide the following information as part of the offer:

(i) For covered equipment—

(A) The entity that produced the covered telecommunications equipment (include entity name, unique entity identifier, CAGE code, and whether the entity was the

OEM or a distributor, if known);

(B) A description of all covered telecommunications equipment offered (include brand; model number, such as OEM number, manufacturer part number, or wholesaler number; and item description, as applicable); and

(C) Explanation of the proposed use of covered telecommunications equipment and any factors relevant to determining if such use would be permissible under the prohibition in paragraph (b)(2) of this provision.

(ii) For covered services—

(A) If the service is related to item maintenance: A description of all covered telecommunications services offered (include on the item being maintained:

Brand; model number, such as OEM number, manufacturer part number, or wholesaler number; and item description, as applicable); or

(B) If not associated with maintenance, the PSC of the service being provided;

and explanation of the proposed use of covered telecommunications services and any factors relevant to determining if such use would be permissible under the prohibition in paragraph (b)(2) of this provision.

(End of provision)

FAR 52.212-3 Offeror Representations and Certifications – Commercial Products and

Commercial Services (MAY 2024) (Provision)

[If Offeror Representations and Certifications are not complete in SAM the offeror shall submit a completed copy of the provision at FAR 52.212-3, Offeror Representations and Certifications-

Commercial Products and Commercial Services, with your offer. The full provision is available from http://www.acquisition.gov/far/.

If Offeror Representations and Certifications are complete in SAM, the offeror shall complete the following:]

(b)(1) Annual Representations and Certifications. Any changes provided by the Offeror in paragraph (b)(2) of this provision do not automatically change the representations and certifications in SAM.

(2) The offeror has completed the annual representations and certifications electronically in

SAM accessed through http://www.sam.gov. After reviewing SAM information, the

Offeror verifies by submission of this offer that the representations and certifications currently posted electronically at FAR 52.212-3, Offeror Representations and

Certifications-Commercial Products and Commercial Services, have been entered or updated in the last 12 months, are current, accurate, complete, and applicable to this solicitation (including the business size standard(s) applicable to the NAICS code(s) referenced for this solicitation), at the time this offer is submitted and are incorporated in this offer by reference (see FAR 4.1201), except for paragraphs ______________.

Any changes provided by the offeror are applicable to this solicitation only, and do not result in an update to the representations and certifications posted electronically on SAM.]

(End of provision) http://www.acquisition.gov/far/ http://www.sam.gov/ https://www.acquisition.gov/content/part-52-solicitation-provisions-and-contract-clauses#i1060550 https://www.acquisition.gov/content/part-4-administrative-and-information-matters#i1121876

(xi) FAR 52.212-4 Contract Terms and Conditions – Commercial Products and

Commercial Services (NOV 2023)

(xii) FAR 52.212-5 Contract Terms and Conditions Required to Implement Statutes or

Executive Orders – Commercial Products and Commercial Services (MAY 2024)

(a) The Contractor shall comply with the following Federal Acquisition Regulation (FAR) clauses, which are incorporated in this contract by reference, to implement provisions of law or Executive orders applicable to acquisitions of commercial products and commercial services:

(1) FAR 52.203-19, Prohibition on Requiring Certain Internal Confidentiality Agreements or Statements (JAN 2017) (section 743 of Division E, Title VII, of the Consolidated and

Further Continuing Appropriations Act, 2015 (Pub. L. 113-235) and its successor provisions in subsequent appropriations acts (and as extended in continuing resolutions)).

(2) FAR 52.204-23, Prohibition on Contracting for Hardware, Software, and Services

Developed or Provided by Kaspersky Lab Covered Entities (DEC 2023) (Section 1634 of

Pub. L. 115-91).

(3) FAR 52.204-25, Prohibition on Contracting for Certain Telecommunications and Video

Surveillance Services or Equipment. (NOV 2021) (Section 889(a)(1)(A) of Pub. L. 115-

232).

(4) FAR 52.209-10, Prohibition on Contracting with Inverted Domestic Corporations (NOV

2015).

(5) FAR 52.232-40, Providing Accelerated Payments to Small Business

Subcontractors (MAR 2023) (31 U.S.C. 3903 and 10 U.S.C. 3801).

(6) FAR 52.233-3, Protest After Award (AUG 1996) (31 U.S.C. 3553).

(7) FAR 52.233-4, Applicable Law for Breach of Contract Claim (OCT 2004) (Public Laws

108-77 and 108-78 (19 U.S.C. 3805 note)).

(b) The Contractor shall comply with the FAR clauses in this paragraph (b) that the Contracting Officer has indicated as being incorporated in this contract by reference to implement provisions of law or Executive orders applicable to acquisitions of commercial products and commercial services:

[Contracting Officer check as appropriate.]

☐ (1) FAR 52.203-6, Restrictions on Subcontractor Sales to the Government (JUN 2020), with

Alternate I (NOV 2021) (41 U.S.C. 4704 and 10 U.S.C. 4655).

☐ (2) FAR 52.203-13, Contractor Code of Business Ethics and Conduct (NOV 2021) (41

U.S.C. 3509)).

☐ (3) FAR 52.203-15, Whistleblower Protections under the American Recovery and

Reinvestment Act of 2009 (Jun 2010) (Section 1553 of Pub. L. 111-5). (Applies to contracts funded by the American Recovery and Reinvestment Act of 2009.)

https://www.acquisition.gov/far/52.203-19#FAR_52_203_19 https://www.acquisition.gov/far/52.204-23#FAR_52_204_23 https://www.acquisition.gov/far/52.204-25#FAR_52_204_25 https://www.acquisition.gov/far/52.209-10#FAR_52_209_10 https://www.acquisition.gov/far/52.232-40#FAR_52_232_40 https://www.govinfo.gov/link/uscode/31/3903 https://www.govinfo.gov/link/uscode/10/3801 https://www.acquisition.gov/far/52.233-3#FAR_52_233_3 http://uscode.house.gov/browse.xhtml;jsessionid=114A3287C7B3359E597506A31FC855B3 https://www.acquisition.gov/far/52.233-4#FAR_52_233_4 http://uscode.house.gov/browse.xhtml;jsessionid=114A3287C7B3359E597506A31FC855B3 https://www.acquisition.gov/far/52.203-6#FAR_52_203_6 http://uscode.house.gov/browse.xhtml;jsessionid=114A3287C7B3359E597506A31FC855B3 https://www.govinfo.gov/link/uscode/10/4655 https://www.acquisition.gov/far/52.203-13#FAR_52_203_13 http://uscode.house.gov/browse.xhtml;jsessionid=114A3287C7B3359E597506A31FC855B3 http://uscode.house.gov/browse.xhtml;jsessionid=114A3287C7B3359E597506A31FC855B3 https://www.acquisition.gov/far/52.203-15#FAR_52_203_15

☒ (4) FAR 52.203-17, Contractor Employee Whistleblower Rights (NOV 2023) (41 U.S.C.

4712); this clause does not apply to contracts of DoD, NASA, the Coast Guard, or applicable elements of the intelligence community—see FAR 3.900(a).

☐ (5) FAR 52.204-10, Reporting Executive Compensation and First-Tier Subcontract Awards

(Jun 2020) (Pub. L. 109-282) (31 U.S.C. 6101 note).

☐ (6) [Reserved].

☐ (7) FAR 52.204-14, Service Contract Reporting Requirements (OCT 2016) (Pub. L. 111-

117, section 743 of Div. C).

☐ (8) FAR 52.204-15, Service Contract Reporting Requirements for Indefinite-Delivery

Contracts (OCT 2016) (Pub. L. 111-117, section 743 of Div. C).

☒ (9) FAR 52.204-27, Prohibition on a ByteDance Covered Application (JUN 2023) (Section

102 of Division R of Pub. L. 117-328).

☐ (10) FAR 52.204-28, Federal Acquisition Supply Chain Security Act Orders—Federal

Supply Schedules, Governmentwide Acquisition Contracts, and Multi-Agency Contracts.

(Dec 2023) (Pub. L. 115–390, title II)

☐ (11)(i) FAR 52.204-30, Federal Acquisition Supply Chain Security Act Orders—

Prohibition (Dec 2023) (Pub. L. 115–390, title II)

☐ (ii) Alternate I (Dec 2023) of FAR 52.204-30.

☐ (12) FAR 52.209-6, Protecting the Government’s Interest When Subcontracting with

Contractors Debarred, Suspended, or Proposed for Debarment. (NOV 2021) (31 U.S.C.

6101 note).

☐ (13) FAR 52.209-9, Updates of Publicly Available Information Regarding Responsibility

Matters (OCT 2018) (41 U.S.C. 2313).Updates of Publicly Available Information

Regarding Responsibility Matters (Oct 2018) (41 U.S.C. 2313).

☐ (14) [Reserved].

☐ (15) FAR 52.219-3, Notice of HUBZone Set-Aside or Sole-Source Award (OCT 2022) (15

U.S.C. 657a).

☐ (16) FAR 52.219-4, Notice of Price Evaluation Preference for HUBZone Small Business

Concerns (OCT 2022) (if the offeror elects to waive the preference, it shall so indicate in its offer) (15 U.S.C. 657a).

☐ (17) [Reserved]

☒ (18) (i) FAR 52.219-6, Notice of Total Small Business Set-Aside (NOV 2020) (15 U.S.C.

644).

☐ (ii) Alternate I (Mar 2020) of FAR 52.219-6.

☐ (19) (i) FAR 52.219-7, Notice of Partial Small Business Set-Aside (NOV 2020) (15 U.S.C.

644).

☐ (ii) Alternate I (Mar 2020) of FAR 52.219-7.

☐ (20) FAR 52.219-8, Utilization of Small Business Concerns (FEB 2024) (15 U.S.C.

637(d)(2) and (3)).

☐ (21) (i) FAR 52.219-9, Small Business Subcontracting Plan (SEP 2023)

(15 U.S.C. 637(d)(4)).

☐ (ii) Alternate I (Nov 2016) of FAR 52.219-9.

☐ (iii) Alternate II (Nov 2016) of FAR 52.219-9.

https://www.acquisition.gov/far/52.203-17#FAR_52_203_17 https://www.govinfo.gov/link/uscode/41/4712 https://www.govinfo.gov/link/uscode/41/4712 https://www.acquisition.gov/far/3.900#FAR_3_900 https://www.acquisition.gov/far/52.204-10#FAR_52_204_10 http://uscode.house.gov/view.xhtml?req=granuleid:USC-prelim-title31-section6101&num=0&edition=prelim https://www.acquisition.gov/far/52.204-14#FAR_52_204_14 https://www.acquisition.gov/far/52.204-15#FAR_52_204_15 https://www.acquisition.gov/far/52.204-27#FAR_52_204_27 https://www.acquisition.gov/far/52.204-28#FAR_52_204_28 https://www.govinfo.gov/link/plaw/115/public/390 https://www.acquisition.gov/far/52.204-30#FAR_52_204_30 https://www.govinfo.gov/link/plaw/115/public/390 https://www.acquisition.gov/far/52.204-30#FAR_52_204_30 https://www.acquisition.gov/far/52.209-6#FAR_52_209_6 http://uscode.house.gov/view.xhtml?req=granuleid:USC-prelim-title31-section6101&num=0&edition=prelim http://uscode.house.gov/view.xhtml?req=granuleid:USC-prelim-title31-section6101&num=0&edition=prelim https://www.acquisition.gov/far/52.209-9#FAR_52_209_9 http://uscode.house.gov/view.xhtml?req=granuleid:USC-prelim-title41-section2313&num=0&edition=prelim https://www.acquisition.gov/far/52.219-3#FAR_52_219_3 http://uscode.house.gov/view.xhtml?req=granuleid:USC-prelim-title15-section637a&num=0&edition=prelim http://uscode.house.gov/view.xhtml?req=granuleid:USC-prelim-title15-section637a&num=0&edition=prelim https://www.acquisition.gov/far/52.219-4#FAR_52_219_4 http://uscode.house.gov/browse.xhtml;jsessionid=114A3287C7B3359E597506A31FC855B3 https://www.acquisition.gov/far/52.219-6#FAR_52_219_6 http://uscode.house.gov/browse.xhtml;jsessionid=114A3287C7B3359E597506A31FC855B3 http://uscode.house.gov/browse.xhtml;jsessionid=114A3287C7B3359E597506A31FC855B3 https://www.acquisition.gov/far/52.219-6#FAR_52_219_6 https://www.acquisition.gov/far/52.219-7#FAR_52_219_7 http://uscode.house.gov/browse.xhtml;jsessionid=114A3287C7B3359E597506A31FC855B3 http://uscode.house.gov/browse.xhtml;jsessionid=114A3287C7B3359E597506A31FC855B3 https://www.acquisition.gov/far/52.219-7#FAR_52_219_7 https://www.acquisition.gov/far/52.219-8#FAR_52_219_8 http://uscode.house.gov/browse.xhtml;jsessionid=114A3287C7B3359E597506A31FC855B3 http://uscode.house.gov/browse.xhtml;jsessionid=114A3287C7B3359E597506A31FC855B3 https://www.acquisition.gov/far/52.219-9#FAR_52_219_9 http://uscode.house.gov/browse.xhtml;jsessionid=114A3287C7B3359E597506A31FC855B3 https://www.acquisition.gov/far/52.219-9#FAR_52_219_9 https://www.acquisition.gov/far/52.219-9#FAR_52_219_9

☐ (iv) Alternate III (Jun 2020) of FAR 52.219-9.

☐ (v) Alternate IV (Sep 2023) of FAR 52.219-9.

☐ (22) (i) FAR 52.219-13, Notice of Set-Aside of Orders (MAR 2020) (15 U.S.C. 644(r)).

☐ (ii) Alternate I (MAR 2020) of FAR 52.219-13.

☐ (23) FAR 52.219-14, Limitations on Subcontracting (OCT 2022) (15 U.S.C. 637s).

[Contracting Officer check as appropriate.]

☐ By the end of the base term of the contract and then by the end of each subsequent option period; or

☐ By the end of the performance period for each order issued under the contract.

☐ (24) FAR 52.219-16, Liquidated Damages—Subcontracting Plan (SEP 2021) (15 U.S.C.

637(d)(4)(F)(i)).

☐ (25) FAR 52.219-27, Notice of Set-Aside for, or Sole-Source Award to, Service-Disabled

Veteran-Owned Small Business (SDVOSB) Concerns Eligible Under the SDVOSB

Program (FEB 2024) (15 U.S.C. 657f).

☐ (26) (i) FAR 52.219-28, Post Award Small Business Program Rerepresentation (FEB 2024)

(15 U.S.C. 632(a)(2)).

☐ (ii) Alternate I (MAR 2020) of FAR 52.219-28.

☐ (27) FAR 52.219-29, Notice of Set-Aside for, or Sole-Source Award to, Economically

Disadvantaged Women-Owned Small Business Concerns (OCT 2022) (15 U.S.C. 637(m)).

☐ (28) FAR 52.219-30, Notice of Set-Aside for, or Sole-Source Award to, Women-Owned

Small Business Concerns Eligible Under the Women-Owned Small Business Program

(OCT 2022) (15 U.S.C. 637(m).

☐ (29) FAR 52.219-32, Orders Issued Directly Under Small Business Reserves (MAR 2020)

(15 U.S.C. 644(r)).

☐ (30) FAR 52.219-33, Nonmanufacturer Rule (SEP 2021) (15U.S.C. 637(a)(17)).

☒ (31) FAR 52.222-3, Convict Labor (JUN 2003) (E.O.11755).

☒ (32) FAR 52.222-19, Child Labor-Cooperation with Authorities and Remedies (FEB

2024).[

☒ (33) FAR 52.222-21, Prohibition of Segregated Facilities (APR 2015).

☒ (34) (i) FAR 52.222-26, Equal Opportunity (SEP 2016) (E.O.11246).

☐ (ii) Alternate I (FEB 1999) of FAR 52.222-26.

☐ (35) (i) FAR 52.222-35, Equal Opportunity for Veterans (JUN 2020) (38 U.S.C. 4212).

☐ (ii) Alternate I (JUL 2014) of FAR 52.222-35.

☒ (36) (i) FAR 52.222-36, Equal Opportunity for Workers with Disabilities (JUN

2020) (29 U.S.C. 793).

☐ (ii) Alternate I (Jul 2014) of FAR 52.222-36.

☐ (37) FAR 52.222-37, Employment Reports on Veterans (JUN 2020) (38 U.S.C. 4212).

☐ (38) FAR 52.222-40, Notification of Employee Rights Under the National Labor Relations

Act (Dec 2010) (E.O. 13496).

☒ (39) (i) FAR 52.222-50, Combating Trafficking in Persons (NOV 2021) (22 U.S.C. chapter

78 and E.O. 13627).

https://www.acquisition.gov/far/52.219-9#FAR_52_219_9 https://www.acquisition.gov/far/52.219-9#FAR_52_219_9 https://www.acquisition.gov/far/52.219-13#FAR_52_219_13 http://uscode.house.gov/browse.xhtml;jsessionid=114A3287C7B3359E597506A31FC855B3 https://www.acquisition.gov/far/52.219-13#FAR_52_219_13 https://www.acquisition.gov/far/52.219-14#FAR_52_219_14 http://uscode.house.gov/browse.xhtml;jsessionid=114A3287C7B3359E597506A31FC855B3 https://www.acquisition.gov/far/52.219-16#FAR_52_219_16 http://uscode.house.gov/browse.xhtml;jsessionid=114A3287C7B3359E597506A31FC855B3 http://uscode.house.gov/browse.xhtml;jsessionid=114A3287C7B3359E597506A31FC855B3 https://www.acquisition.gov/far/52.219-27#FAR_52_219_27 http://uscode.house.gov/browse.xhtml;jsessionid=114A3287C7B3359E597506A31FC855B3 https://www.acquisition.gov/far/52.219-28#FAR_52_219_28 http://uscode.house.gov/browse.xhtml;jsessionid=114A3287C7B3359E597506A31FC855B3 https://www.acquisition.gov/far/52.219-28#FAR_52_219_28 https://www.acquisition.gov/far/52.219-29#FAR_52_219_29 http://uscode.house.gov/browse.xhtml;jsessionid=114A3287C7B3359E597506A31FC855B3 https://www.acquisition.gov/far/52.219-30#FAR_52_219_30 http://uscode.house.gov/browse.xhtml;jsessionid=114A3287C7B3359E597506A31FC855B3 https://www.acquisition.gov/far/52.219-32#FAR_52_219_32 https://www.govinfo.gov/content/pkg/USCODE-2018-title15/html/USCODE-2018-title15-chap14A-sec644.htm https://www.acquisition.gov/far/52.219-33#FAR_52_219_33 https://www.govinfo.gov/content/pkg/USCODE-2018-title15/html/USCODE-2018-title15-chap14A-sec637.htm https://www.acquisition.gov/far/52.222-3#FAR_52_222_3 https://www.acquisition.gov/far/52.222-19#FAR_52_222_19 https://www.usda.gov/sites/default/files/documents/far-class-deviation-regarding-new-trade-agreements-thresholds.pdf https://www.acquisition.gov/far/52.222-21#FAR_52_222_21 https://www.acquisition.gov/far/52.222-26#FAR_52_222_26 https://www.acquisition.gov/far/52.222-26#FAR_52_222_26 https://www.acquisition.gov/far/52.222-35#FAR_52_222_35 http://uscode.house.gov/view.xhtml?req=granuleid:USC-prelim-title38-section4212&num=0&edition=prelim https://www.acquisition.gov/far/52.222-35#FAR_52_222_35 https://www.acquisition.gov/far/52.222-36#FAR_52_222_36 http://uscode.house.gov/view.xhtml?req=granuleid:USC-prelim-title29-section793&num=0&edition=prelim https://www.acquisition.gov/far/52.222-36#FAR_52_222_36 https://www.acquisition.gov/far/52.222-37#FAR_52_222_37 http://uscode.house.gov/view.xhtml?req=granuleid:USC-prelim-title38-section4212&num=0&edition=prelim https://www.acquisition.gov/far/52.222-40#FAR_52_222_40 https://www.acquisition.gov/far/52.222-50#FAR_52_222_50

☐ (ii) Alternate I (Mar 2015) of 52.222-50 ( 22 U.S.C. chapter 78 and E.O. 13627).

☐ (40) FAR 52.222-54, Employment Eligibility Verification (MAY 2022) (Executive Order

12989). (Not applicable to the acquisition of commercially available off-the-shelf items or certain other types of commercial products or commercial services as prescribed in FAR

22.1803.)

☐ (41) (i) FAR 52.223-9, Estimate of Percentage of Recovered Material Content for EPA–

Designated Items (May 2008) (42 U.S.C. 6962(c)(3)(A)(ii)). (Not applicable to the acquisition of commercially available off-the-shelf items.)

☐ (ii) Alternate I (MAY 2008) of FAR 52.223-9 (42 U.S.C. 6962(i)(2)(C)). (Not applicable to the acquisition of commercially available off-the-shelf items.)

☐ (42) FAR 52.223-11, Ozone-Depleting Substances and High Global Warming Potential

Hydrofluorocarbons (MAY 2024) (42 U.S.C. 7671, et seq.).

☐ (43) FAR 52.223-12, Maintenance, Service, Repair, or Disposal of Refrigeration

Equipment and Air Conditioners (MAY 2024) (42 U.S.C. 7671, et seq.).

☐ (44) FAR 52.223-20, Aerosols (MAY 2024) (42 U.S.C. 7671, et seq.).

☐ (45) FAR 52.223-21, Foams (MAY 2024) (42 U.S.C. 7671, et seq.).

☐ (46) FAR 52.223-23, Sustainable Products and Services (MAY 2024) (E.O. 14057, 7

U.S.C. 8102, 42 U.S.C. 6962, 42 U.S.C. 8259b, and 42 U.S.C. 7671l).

☐ (47) (i) FAR 52.224-3 Privacy Training (JAN 2017) (5 U.S.C. 552 a).

☐ (ii) Alternate I (Jan 2017) of FAR 52.224-3.

☐ (48) (i) FAR 52.225-1, Buy American-Supplies (OCT 2022) (41 U.S.C. chapter 83).

☐ (ii) Alternate I (Oct 2022) of 52.225-1

☐ (49) (i) FAR 52.225-3, Buy American-Free Trade Agreements-Israeli Trade Act (NOV

2023) (19 U.S.C. 3301 note, 19 U.S.C. 2112 note, 19 U.S.C. 3805 note, 19 U.S.C. 4001 note, 19 U.S.C. chapter 29 (sections 4501-4732), Public Law 103-182, 108-77, 108-78, 108-286, 108-302, 109-53, 109-169, 109-283, 110-138, 112-41, 112-42, and 112-43.

☐(ii) Alternate I [Reserved]

☐(iii) Alternate II (DEC 2022) of FAR 52.225-3.

☐(iv) Alternate III (FEB 2024) of FAR 52.225-3.

☐(v) Alternate IV (OCT 2022) of FAR 52.225-3.

☐ (50) FAR 52.225-5, Trade Agreements (NOV 2023) (19 U.S.C. 2501, et seq., 19 U.S.C.

3301 note).

☒ (51) FAR 52.225-13, Restrictions on Certain Foreign Purchases (FEB 2021) (E.O.’s, proclamations, and statutes administered by the Office of Foreign Assets Control of the

Department of the Treasury).

☐ (52) FAR 52.225-26, Contractors Performing Private Security Functions Outside the

United States (Oct 2016) (Section 862, as amended, of the National Defense Authorization

Act for Fiscal Year 2008; 10 U.S.C. Subtitle A, Part V, Subpart G Note).

☐ (53) FAR…