127EAX21Q0028 - Santa Catalina Window Replacements.pdf

CONSTRUCTION RFQ SOL NO: 12837121Q0028

UNIT: CORONADO NATIONAL FOREST

PROJ NAME: WINDOW REPLACEMENT SABINO CANYON & PALISADES VIS CTR

1. Introduction. The USDA Forest Service, Coronado National Forest has a requirement to replace existing windows at Sabino Canyon Visitor Center and Palisades Visitor Center, Pima County, Arizona. Project consists of removing approximately 31 existing windows and replacing with aluminum framed dual pane low-E glass units.

All questions shall be submitted in writing, before 4:00 p.m., July 9, 2021 to the Contracting Officer (CO) of record by email to: warren.abbott@usda.gov . Questions will answered by amendment as soon as practical.

2. Type of Award. As a result of this solicitation, Government anticipates The Government Anticipates awarding a Firm Fixed-Price Construction Contract using Request For Quotation (RFQ) Best Value - Tradeoffs format. This is a 100% Small Business Set Aside to NAICS code 238150 $16.5 Million. PSC code Z2AA.

In order to be eligible for award of a Federal contract, potential vendors need to already be registered in the System for Award Management (SAM) at https://sam.gov/content/home . DUNS and business email are required to enroll in SAM.

3. How to submit your offer. See the Instruction To Offerors contained in Section L and Section M. In addition to the Schedule of Items (pricing), you must submit a response to factors in Section M.

Offers shall be submitted by email to the Contracting Officer (warren.abbott@usda.gov ) on or before July 20, 2021 1600 PDT(Pacific Daylight Time).

Offers (complete) shall only be sent to the Contracting Officer.

4. No Formal Site Visit has been scheduled for project. Individual site visit requests and technical questions may be directed to the COR:

Gerardo Pedrego, Civil Engineer – Email: gerardo.pedrego@usda.gov; -- Phone: 520-388-8410 Coronado National Forest 300 W. Congress Tucson, AZ 85701 mailto:warren.abbott@usda.gov https://sam.gov/content/home mailto:warren.abbott@usda.gov mailto:gerardo.pedrego@usda.gov

PROJ NAME: WINDOW REPLACEMENT SABINO CANYON & PALISADES VIS CTR

NSN 7540-01-155-3212 1442-101 STANDARD FORM 1442 (REV. 4-85)

Computer Generated Prescribed by GSA

FAR (48 CFR) 53.236-1I

SOLICITATION, OFFER,

AND AWARD

(Construction, Alteration, or Repair)

B. SOLICITATION NO.

127EAX21Q0028

2. TYPE OF SOLICITATION

SEALED BID (IFB)

NEGOTIATED (RFQ)

3. DATE ISSUED

6/17/2021

PAGE OF PAGES

2 36

IMPORTANT — The “offer” section on the reverse must be fully completed by offeror.

4. CONTRACT NO.

5. REQUISITION/PURCHASE REQUEST NO.

1036911

6. PROJECT NO.

7. ISSUED BY CODE 128371 8. ADDRESS OFFER TO

USDA-FS SOUTHWESTERN REGION PPS-FPO CSA7

333 BROADWAY SE

ALBUQUERQUE, NM 87102

USDA-FS SOUTHWESTERN REGION PPS-FPO CSA7

PO BOX 640

30 S. CHIRICAHUA DRIVE

SPRINGERVILLE, AZ 85938

9. FOR INFORMATION

CALL:

B. NAME

Warren Abbott

B. TELEPHONE NO. (Include area code) (NO COLLECT CALLS)

(928) 333-6344

SOLICITATION

NOTE: In sealed bid solicitations “offer” and “offeror” mean “bid” and “bidder.”

10. THE GOVERNMENT REQUIRES PERFORMANCE OF THE WORK DESCRIBED IN THESE DOCUMENTS (Title, identifying no., date):

The USDA Forest Service, Coronado National Forest has a requirement to replace existing windows at Sabino Canyon Visitor Center and Palisades Visitor Center, Pima County, Arizona. Project consists of removing approximately 31 existing windows and replacing with aluminum framed dual pane low-E glass units.

MAGNITUDE OF PROJECT: Less than$25,000. This solicitation is a 100 percent Total Small Business Set-Aside.

NAICS: 238150 $16.50 Million is size standard for small business. PSC: Z2AA

Davis-Bacon Wages apply. Payment and Performance Bonds will not be required.

Offerors are required to have active vendor record for the DUNS number above in the System for Award Management (SAM) https://sam.gov/content/home

11. The Contractor shall begin performance within 10 calendar days and complete it within time specified calendar days after receiving award, notice to proceed. This performance period is mandatory, negotiable. (See .)

12A. THE CONTRACTOR MUST FURNISH ANY REQUIRED PERFORMANCE AND PAYMENT BONDS?

(If “YES,” indicate within how many calendar days after award in Item 12B.)

YES NO

12B. CALENDAR DAYS

13. ADDITIONAL SOLICITATION REQUIREMENTS:

A. Sealed offers in original and 1 copies to perform the work required are due at the place specified in Item 8 by 1600 PDT (hour) local time JULY 20, 2021 (date). If this is a sealed bid solicitation, offers must be publicly opened at that time. Sealed envelopes containing offers shall be marked to show the offeror’s name and address, the solicitation number, and the date and time offers are due.

B. An offer guarantee is, is not required.

C. All offers are subject to the (1) work requirements, and (2) other provisions and clauses incorporated in the solicitation in full text or by reference.

D. Offers providing less than 60 calendar days for Government acceptance after the date offers are due will not be considered and will be rejected.

https://sam.gov/content/home

Computer Generated STANDARD FORM 1442 BACK (REV. 4-85)

OFFER (Must be fully completed by offeror)

14. NAME AND ADDRESS OF OFFEROR (Include ZIP Code)

15. TELEPHONE NO. (Include area code)

16. REMITTANCE ADDRESS (Include only if different than Item 14)

CODE FACILITY CODE

17. The offeror agrees to perform the work at the prices specified below in strict accordance with the terms of this solicitation, if this offer is accepted by the Government within calendar days after the date offers are due. (Insert any number equal to or greater than the minimum requirement stated in Item 13D. Failure to insert any number means the offeror accepts the minimum in Item 13D.

AMOUNTS

18. The offeror agrees to furnish any required performance and payment bonds.

19. ACKNOWLEDGMENT OF AMENDMENTS

The offeror acknowledges receipt of amendments to the solicitation — give number and date of each

AMENDMENT NO.

DATE

20A. NAME AND TITLE OF PERSON AUTHORIZED TO SIGN OFFER (Type or print)

20B. SIGNATURE

20C. OFFER DATE

AWARD (To be completed by Government)

21. ITEMS ACCEPTED:

22. AMOUNT

23. ACCOUNTING AND APPROPRIATION DATA

24. SUBMIT INVOICES TO ADDRESS SHOWN IN

(4 copies unless otherwise specified)

ITEM

25. OTHER THAN FULL AND OPEN COMPETITION PURSUANT TO

10 U.S.C. 2304I( ) 41 U.S.C. 253I( )

26. ADMINISTERED BY CODE 27. PAYMENT WILL BE MADE BY

SAME AS 7 Electronic Funds Transfer via Invoice Processing Platform at www.ipp.gov

CONTRACTING OFFICER WILL COMPLETE ITEM 28 OR 29 AS APPLICABLE

28. NEGOTIATED AGREEMENT (Contractor is required to sign this document and return ____ copies to issuing office.) Contractor agrees to furnish and deliver all items or perform all work, requirements identified on this form and any continuation sheets for the consideration stated in this contract. The rights and obligations of the parties to this contract shall be governed by (a) this contract award, (b) the solicitation, and (c) the clauses, representations, certifications, and specifications or incorporated by reference in or attached to this contract.

29. AWARD (Contractor is not required to sign this document.) Your offer on this solicitation is hereby accepted as to the items listed. This award consummates the contract, which consists of (a) the Government solicitation and your offer, and (b) this contract award. No further contractual document is necessary.

30A. NAME AND TITLE OF CONTRACTOR OR PERSON AUTHORIZED TO

SIGN (Type or print)

31A. NAME OF CONTRACTING OFFICER (Type or print)

30B. SIGNATURE

30C. DATE

31B. UNITED STATES OF AMERICA

BY

31C. AWARD DATE

PART I – THE SCHEDULE

SECTION B – SCHEDULE OF ITEMS: SUPPLIES OR SERVICES AND PRICES/COSTS

WINDOW REPLACEMENT SABINO CANYON VISITOR CENTER & PALISADES VISITOR CENTER

ITEM NO. ITEM DESCRIPTION EST.

QTY

METH.

OF

MEAS.*

UNIT UNIT

PRICE

EXTENDED

TOTAL**

BASE LINE ITEMS:

1001 MOBILIZATION 1 LSQ LS

SABINO CANYON VISITOR CENTER (SCVIC):

1002 2FT X 46IN PICTURE WINDOW 1 AQ EA

1003 18IN X 4FT SINGLE HUNG WINDOW 4 AQ EA

1004 18IN X 4FT PICTURE WINDOW 2 AQ EA

1005 30.5IN X 90IN PICTURE WINDOW 1 AQ EA

1006 4FT X 5FT SLIDING WINDOW 1 AQ EA

1007 56.5IN X 6FT SLIDING WINDOW 2 AQ EA

* LS = Lump Sum, LSQ = Lump Sum Quantity, AQ = Actual Quantity

SUBTOTAL SCVIC LINE ITEMS

OPTION LINE ITEMS SABINO CANYON VISITOR CENTER (SCVIC):

1008 2FT X 3FT PICTURE WINDOW 2 AQ EA

1009 3FT X 4FT PICTURE WINDOW 4 AQ EA

SUBTOTAL SCVIC OPTION LINE ITEMS

PALISADES VISITOR CENTER (PVIC): EST.

QTY

METH.

OF

MEAS.*

UNIT UNIT

PRICE

EXTENDED

TOTAL**

1010 42IN X 66.5IN SINGLE HUNG WINDOW 14 AQ EA

SUBTOTAL PVIC LINE ITEMS

GRAND TOTAL FOR ALL LINE ITEMS

** OFFER PRICING INCLUDES ALL FEDERAL, STATE, LOCAL TAXES, PERMITS, LICENSES, FEES, ETC. TO COMPLETE THE WORK

IN STRICT ACCORDANCE WITH ALL TERMS AND CONDITIONS CONTAINED HEREIN.

CERTIFICATION OF OFFER AND SUBMISSIONS FOR THIS REQUEST FOR PROPOSALS:

VENDOR COMPANY NAME:____________________________________ DUNS#____________________

AUTHORIZED TO SIGN (NAME & TITLE):__________________________________________________________

SIGNATURE:____________________________________________________ DATE:_____________________

BUSINESS EMAIL: _______________________________________ PHONE: ____________________________

SECTION C – STATEMENT OF WORK

C1 Scope of Work Contractor shall provide all materials, equipment, supervision, labor, transportation, and miscellaneous to replace existing windows at Sabino Canyon Visitor Center and Palisades Visitor Center, Pima County, Arizona. Project consists of removing approximately 31 existing windows and replacing with aluminum framed dual pane low-E glass units. All work shall in accordance with specifications contained herein.

Contractor shall remove existing windows and replace with new aluminum framed energy efficient double paned glass windows.

The buildings shall be protected from any weather during construction operations to prevent damage to the structure and items/equipment inside. The buildings will be in use during construction. Therefore, the Contractor shall take necessary safety measures to protect employees and the public during construction to include running a magnetic sweeper around the site to ensure any excess nails, screws or any other foreign metal object are removed from the work site.

C2 Location, General Site Conditions, Facilities and Temporary Controls The Palisades Visitor Center is located on the Santa Catalina Ranger District of the Coronado National Forest.

The building is located at Mile Post 20 of the Santa Catalina Highway, approximately 23 miles northeast of Tucson, AZ (Township 12S, Range 16E, and Section 9). Lat: 32.410412°; Long: -110.714689°.

Water and electricity for construction use is available. A restroom is located across the highway.

The Sabino Canyon Visitor Center is located at the base of the Santa Catalina Mountains on the Santa Catalina Ranger District of the Coronado National Forest in Tucson, Arizona (Township 13 South, Range 15 East, and Section 9). Physical address 5700 N Sabino Canyon Rd, Tucson, AZ 85750.

Water and electricity for construction use is available. A restroom is located on site.

It will be the Contractor’s responsibility to familiarize themselves with the existing conditions and notify the Government of any discrepancies shown in these documents.

Technical Point-Of-Contact - Contracting Officer’s Representative:

Gerardo Pedrego, Civil Engineer Coronado National Forest 300 W. Congress Tucson, AZ 85701 Email: gerardo.pedrego@usda.gov Phone: 520-388-8410

C3 Magnitude of project – Less than $25,000.

mailto:gerardo.pedrego@usda.gov

C4 Technical Specifications

See Exhibit 3 – Specifications

C5 Clauses

452.211-72 Statement of Work/Specifications (FEB 1988) The Contractor shall furnish the necessary personnel, material, equipment, services and facilities (except as otherwise specified), to perform the Statement of Work/Specifications referenced in solicitation.

452.211-73 Attachments to Statement of Work/Specifications (FEB 1988) The attachments to the Statement of Work/Specifications listed in Section J are hereby made part of this solicitation and any resultant contract.

SECTION D – PACKAGING AND MARKING

D1 PACKING AND MARKING

All shipments of materials, equipment and/or supplies shall be addressed to the Contractor and not to the Government.

D2 PROJECT LABELING FOR OFFICIAL COORESPONDENCE

The Government singularly identifies each project with a contract number at time of award. The contract number is a unique identifier to purposely and permanently represent an awarded project. The Government issued contract number is to be referenced on all official communication starting upon notice of award.

Johnson, Melissa -FS Include if Specifications are attached rather than included in Section C.

Include if there are attachments in Section J.

SECTION E - INSPECTION AND ACCEPTANCE

52.246-12 INSPECTION OF CONSTRUCTION (AUG 1996)

(a) Definition. Work includes, but is not limited to, materials, workmanship, and manufacture and fabrication of components.

(b) The Contractor shall maintain an adequate inspection system and perform such inspections as will ensure that the work performed under the contract conforms to contract requirements. The Contractor shall maintain complete inspection records and make them available to the Government. All work shall be conducted under the general direction of the Contracting Officer and is subject to Government inspection and test at all places and at all reasonable times before acceptance to ensure strict compliance with the terms of the contract.

(c) Government inspections and tests are for the sole benefit of the Government and do not—

(1) Relieve the Contractor of responsibility for providing adequate quality control measures;

(2) Relieve the Contractor of responsibility for damage to or loss of the material before acceptance;

(3) Constitute or imply acceptance; or

(4) Affect the continuing rights of the Government after acceptance of the completed work under paragraph (i) of this section.

(d) The presence or absence of a Government inspector does not relieve the Contractor from any contract requirement, nor is the inspector authorized to change any term or condition of the specification without the Contracting Officer’s written authorization.

(e) The Contractor shall promptly furnish, at no increase in contract price, all facilities, labor, and material reasonably needed for performing such safe and convenient inspections and tests as may be required by the Contracting Officer. The Government may charge to the Contractor any additional cost of inspection or test when work is not ready at the time specified by the Contractor for inspection or test, or when prior rejection makes re-inspection or retest necessary. The Government shall perform all inspections and tests in a manner that will not unnecessarily delay the work. Special, full size, and performance tests shall be performed as described in the contract.

(f) The Contractor shall, without charge, replace or correct work found by the Government not to conform to contract requirements, unless in the public interest the Government consents to accept the work with an appropriate adjustment in contract price. The Contractor shall promptly segregate and remove rejected material from the premises.

(g) If the Contractor does not promptly replace or correct rejected work, the Government may—

(1) By contract or otherwise, replace or correct the work and charge the cost to the Contractor; or

(2) Terminate for default the Contractor’s right to proceed.

(h) If, before acceptance of the entire work, the Government decides to examine already completed work by removing it or tearing it out, the Contractor, on request, shall promptly furnish all necessary facilities, labor, and material. If the work is found to be defective or nonconforming in any material respect due to the fault of the Contractor or its subcontractors, the Contractor shall defray the expenses of the examination and of satisfactory reconstruction. However, if the work is found to meet contract requirements, the Contracting Officer shall make an equitable adjustment for the additional services involved in the examination and reconstruction, including, if completion of the work was thereby delayed, an extension of time.

(i) Unless otherwise specified in the contract, the Government shall accept, as promptly as practicable after completion and inspection, all work required by the contract or that portion of the work the Contracting Officer determines can be accepted separately. Acceptance shall be final and conclusive except for latent defects, fraud, gross mistakes amounting to fraud, or the Government’s rights under any warranty or guarantee.

(End of clause)

52.246-13 INSPECTION—DISMANTLING, DEMOLITION, OR REMOVAL OF IMPROVEMENTS (AUG 1996)

(a) Unless otherwise designated by the specifications, all workmanship performed under the contract is subject to Government inspection at all times and places where dismantling or demolition work is being performed. The Contractor shall furnish promptly, and at no increase in contract price, all reasonable facilities, labor, and materials necessary for safe and convenient inspection by the Government.

The Government shall perform inspections in a manner that will not unduly delay the work.

(b) The Contractor is responsible for damage to property caused by defective workmanship. The Contractor shall promptly segregate and remove from the premises any unsatisfactory facilities, materials, and equipment used in contract performance, and promptly replaces them with satisfactory items. If the Contractor fails to proceed at once in a workmanlike manner with performance of the work or with the correction of defective workmanship, the Government may—

(1) By contract or otherwise, replace the facilities, materials, and equipment or correct the workmanship and charge the cost to the Contractor; and

(2) Terminate for default the Contractor’s right to proceed. The Contractor and any surety shall be liable, to the extent specified in the contract for any damage or cost of repair or replacement. (End of clause)

52.246-21 WARRANTY OF CONSTRUCTION (MAR 1994)

(a) In addition to any other warranties in this contract, the Contractor warrants, except as provided in paragraph (i) of this clause, that work performed under this contract conforms to the contract requirements and is free of any defect in equipment, material, or design furnished, or workmanship performed by the Contractor or any subcontractor or supplier at any tier.

(b) This warranty shall continue for a period of 1 year from the date of final acceptance of the work. If the Government takes possession of any part of the work before final acceptance, this warranty shall continue for a period of 1 year from the date the Government takes possession.

(c) The Contractor shall remedy at the Contractor’s expense any failure to conform, or any defect. In addition, the Contractor shall remedy at the Contractor’s expense any damage to Government-owned or controlled real or personal property, when that damage is the result of—

(1) The Contractor’s failure to conform to contract requirements; or

(2) Any defect of equipment, material, workmanship, or design furnished.

(d) The Contractor shall restore any work damaged in fulfilling the terms and conditions of this clause. The Contractor’s warranty with respect to work repaired or replaced will run for 1 year from the date of repair or replacement.

(e) The Contracting Officer shall notify the Contractor, in writing, within a reasonable time after the discovery of any failure, defect, or damage.

(f) If the Contractor fails to remedy any failure, defect, or damage within a reasonable time after receipt of notice, the Government shall have the right to replace, repair, or otherwise remedy the failure, defect, or damage at the Contractor’s expense.

(g) With respect to all warranties, express or implied, from subcontractors, manufacturers, or suppliers for work performed and materials furnished under this contract, the Contractor shall—

(1) Obtain all warranties that would be given in normal commercial practice;

(2) Require all warranties to be executed, in writing, for the benefit of the Government, if directed by the Contracting Officer; and

(3) Enforce all warranties for the benefit of the Government, if directed by the Contracting Officer.

(h) In the event the Contractor’s warranty under paragraph (b) of this clause has expired, the Government may bring suit at its expense to enforce a subcontractor’s, manufacturers, or supplier’s warranty.

(i) Unless a defect is caused by the negligence of the Contractor or subcontractor or supplier at any tier, the Contractor shall not be liable for the repair of any defects of material or design furnished by the Government nor for the repair of any damage that results from any defect in Government-furnished material or design.

(j) This warranty shall not limit the Government’s rights under the Inspection and Acceptance clause of this contract with respect to latent defects, gross mistakes, or fraud.

(End of clause)

SECTION F – DELIVERIES OR PERFORMANCE

FAR 52.252-2 CLAUSES INCORPORATED BY REFERENCE (FEB 1998)

This contract incorporates one or more clauses by reference, with the same force and effect as if they were given in full text.

Upon request, the Contracting Officer will make their full text available. Also, the full text of a clause may be accessed electronically at this/these address(es):

https://www.acquisition.gov/browse/index/far https://www.acquisition.gov/agar

FAR 52.211-13 TIME EXTENSIONS (SEP 2000)

FAR 52.211-18 VARIATION IN ESTIMATED QUANTITY (APR 1984)

FAR 52.242-14 SUSPENSION OF WORK (APR 1984)

FAR 52.211-10 Commencement, Prosecution, and Completion of Work (APR 1984)

The Contractor shall be required to (a) commence work under this contract within 10 calendar days after the date the Contractor receives notice-to-proceed, (b) prosecute the work diligently, and (c) complete the entire work ready for use not later than 30 calendar days from issuance of notice-to-proceed. The time stated for completion shall include final cleanup of the premises.

AGAR 452.236-75 MAXIMUM WORK WEEK – CONSTRUCTION SCHEDULE (NOV 1996)

Within 5 calendar days after receipt of a written request from the Contracting Officer, the Contractor must submit the following information in writing for approval:

(a) A schedule as required by FAR 52.236-15, Schedules for Construction Contracts, and

(b) The hours (including the daily starting and stopping times) and days of the week the Contractor proposed to carry out the work

The maximum workweek shall be Monday through Friday, 0700 to 1700. Any change in the work schedule shall be approved in writing by the Contracting Officer prior to commencement.

https://www.acquisition.gov/browse/index/far https://www.acquisition.gov/agar

SECTION G – CONTRACT ADMINISTRATIVE DATA

Government Furnished Items:

The Government will provide the following items: [NONE]

CLAUSES

452.215-73 POST AWARD CONFERENCE (NOV 1996)

A post award conference with the successful offeror is required. It will be scheduled and held with 30 days after the date of contract award. The conference will be held by telephone.

SECTION H – SPECIAL CONTRACT REQUIREMENTS

452.237-74 Key Personnel (FEB 1988)

(a) The Contractor shall assign to this contract the following key personnel: Onsite Representative and an Alternate

Onsite Representative __________________

Alternate __________________

(b) During the first ninety (90) days of performance, the Contractor shall make no substitutions of key personnel unless the substitution is necessitated by illness, death, or termination of employment. The Contractor shall notify the Contracting Officer within 15 calendar days after the occurrence of any of these events and provide the information required by paragraph (c) below. After the initial 90-day period, the Contractor shall submit the information required by paragraph (c) to the Contracting Officer at least 15 days prior to making any permanent substitutions.

(c) The Contractor shall provide a detailed explanation of the circumstances necessitating the proposed substitutions, complete resumes for the proposed substitutes, and any additional information requested by the Contracting Officer. Proposed substitutes should have comparable qualifications to those of the persons being replaced. The Contracting Officer will notify the Contractor within 15 calendar days after receipt of all required information of the decision on substitutions. The contract will be modified to reflect any approved changes of key personnel.

Use if you wish to restrict substitutions of personnel. Fill in the blank.

SECTION I - CONTRACT CLAUSES AND PROVISIONS

FAR 52.252-2 CLAUSES INCORPORATED BY REFERENCE (FEB 1998)

This contract incorporates one or more clauses by reference, with the same force and effect as if they were given in full text.

Upon request, the Contracting Officer will make their full text available. Also, the full text of a clause may be accessed electronically at this/these address(es):

https://www.acquisition.gov/browse/index/far https://www.dm.usda.gov/procurement/policy/FARClassDeviations.htm

FEDERAL ACQUISITION REGULATION (48 CFR CHAPTER 1) CLAUSES

52.202-1 Definitions (JUN 2020) 52.203-3 Gratuities (APR 1984) 52.203-8 Cancellation, Rescission, and Recovery of Funds for Illegal or Improper Activity (MAY 2014) 52.203-10 Price or Fee Adjustment for Illegal or Improper Activity (MAY 2014) 52.203-12 Limitation on Payments to Influence Certain Federal Transactions (OCT 2010) 52.204-4 Printed or Copied Double-Sided on Recycled Paper (MAY 2011) only above SAT 52.204-10 Reporting Executive Compensation and First-Tier Subcontract Awards (JUN 2020) 52.204-13 System for Award Management Maintenance (OCT 2018) 52.204-14 Service Contract Reporting Requirements (OCT 2016) 52.204-16 Commercial and Government Entity Code Reporting (AUG 2020).

52.204-17 Ownership or Control of Offeror (AUG 2020) 52.204-18 Commercial and Government Entity Code Maintenance (AUG 2020) 52.204-20 Predecessor of Offeror (AUG 2020) 52.204-23 Prohibition on Contracting for Hardware, Software, and Services Developed or Provided by Kaspersky Lab and Other Covered Entities (JUL 2018) 52.204-25 Prohibition on Contracting for Certain Telecommunications and Video Surveillance Services or Equipment

(AUG 2020)

52.204-26 Covered Telecommunications Equipment or Services-Representation (AUG 2020) 52.209-6 Protecting the Government’s Interest when Subcontracting with Contractors Debarred, Suspended, or

Proposed for Debarment (OCT 2015) 52.211-10 Commencement, Prosecution, and Completion of Work (APR 1984) 52.211-18 Variation in Estimated Quantity (APR 1984) 52.219-6 Notice of Total Small Business Set-Aside (MAR 2020) 52.219-8 Utilization of Small Business Concerns (OCT 2018) 52.219-14 Limitations on Subcontracting (MAR 2020) 52.222-3 Convict Labor (JUN 2003) 52.222-5 Construction Wage Rate Requirements—Secondary Site of the Work (MAY 2018) 52.222-6 Construction Wage Rate Requirements (AUG 2018) 52.222-7 Withholding of Funds (MAY 2014) 52.222-8 Payrolls and Basic Records (AUG 2018) 52.222-9 Apprentices and Trainees (JUL 2005) 52.222-10 Compliance with Copeland Act Requirements (FEB 1988) 52.222-11 Subcontracts (Labor Standards) (MAY 2014) 52.222-12 Contract Termination - Debarment (MAY 2014) 52.222-13 Compliance with Davis-Bacon and Related Act Regulations (MAY 2014) 52.222-14 Disputes Concerning Labor Standards (FEB 1988) 52.222-15 Certification of Eligibility (MAY 2014) 52.222-21 Prohibition of Segregated Facilities (APR 2015) 52.222-26 Equal Opportunity (APR 2016) 52.222-27 Affirmative Action Compliance Requirements for Construction (APR 2015) 52.222-35 Equal Opportunity for Veterans (JUN 2020) 52.222-36 Equal Opportunity for Workers With Disabilities (JUN 2020) https://www.acquisition.gov/browse/index/far https://www.dm.usda.gov/procurement/policy/FARClassDeviations.htm

52.222-37 Employment Reports on Veterans (OCT 2015) 52.222-50 Combating Trafficking in Persons (MAR 2015) 52.223-1 Biobased Product Certification (MAY 2012) 52.223-2 Affirmative Procurement of Biobased Products Under Service and Construction Contracts (SEP 2013) 52.223-5 Pollution Prevention and Right-to-Know Information (MAY 2011) 52.223-9 Estimate of Percentage of Recovered Material for EPA-Designated Items (MAY 2008) 52.223-15 Energy Efficiency in Energy-Consuming Products (DEC 2007) 52.223-18 Encouraging Contractor Policies to Ban Text Messaging While Driving 52.225-1 Buy American—Supplies (MAY 2014) 52.225-9 Buy American Act—Construction Materials (JAN 2021) 52.225-13 Restrictions on Certain Foreign Purchases (JUN 2008) 52.225-25 Prohibition on Contracting With Entities Engaging in Certain Activities or Transactions Relating to Iran—

Representation and Certifications (JUN 2020) 52.227-1 Authorization and Consent (DEC 2007) 52.227-2 Notice and Assistance Regarding Patent and Copyright Infringement (DEC 2007) 52.227-4 Patent Indemnity -- Construction Contracts (DEC 2007) 52.228-2 Additional Bond Security (OCT 1997) 52.228-11 Pledges of Assets (AUG 2018) 52.228-12 Prospective Subcontractor Requests for Bonds (MAY 2014) 52.228-14 Irrevocable Letter of Credit (NOV 2014) 52.229-3 Federal, State, and Local Taxes (FEB 2013) 52.232-5 Payments Under Fixed-Price Construction Contracts (MAY 2014) 52.232-17 Interest (MAY 2014) 52.232-23 Assignment of Claims (MAY 2014) 52.232-27 Prompt Payment (JAN 2017) 52.232-33 Payment by Electronic Funds Transfer –System for Award Management (OCT 2018) 52.232-39 Unenforceability of Unauthorized Obligations 52.232-40 Providing Accelerated Payments to Small Business Subcontractors (DEC 2013) (Deviation APR 2020) 52.233-1 Disputes (MAY 2014) 52.233-3 Protest After Award (AUG 1996) 52.233-4 Applicable Law for Breach of Contract Claim (OCT 2004) 52.236-2 Differing Site Conditions (APR 1984) 52.236-3 Site Investigation and Conditions Affecting the Work (APR 1984) 52.236-5 Material and Workmanship.

52.236-6 Superintendence by The Contractor (APR 1984) 52.236-7 Permits and Responsibilities.

52.236-8 Other Contracts (APR 1984) 52.236-9 Protection of Existing Vegetation, Structures, Equipment, Utilities, and Improvements (APR 1984) 52.236-10 Operations and Storage Areas (APR 1984) 52.236-11 Use and Possession Prior to Completion (APR 1984) 52.236-12 Cleaning Up (APR 1984) 52.236-13 Accident Prevention (NOV 1991) Alternate I (NOV 1991) 52.236-15 Schedules for Construction Contracts (APR 1984) 52.236-16 Quantity Surveys (APR 1984) 52.236-17 Layout of Work (APR 1984) 52.236-21 Specifications and Drawings for Construction (FEB 1997) 52.236-26 Preconstruction Conference (FEB 1995) 52.237-2 Protection of Government Buildings, Equipment, and Vegetation (APR 1984) 52.242-13 Bankruptcy (JUL 1995) 52.243-5 Changes and Changed Conditions (APR 1981) 52.244-6 Subcontracts for Commercial Items (DEC 2015) 52.245-1 Government Property (APR 2012) 52.245-9 Use and Charges (APR 2012) 52.246-21 Warranty of Construction (MAR 1994) 52.248-3 Value Engineering – Construction (OCT 2015) 52.249-2 Termination for Convenience of the Government (Fixed-Price) (APR 2012)--Alternate I (SEP 1996)

52.249-10 Default (Fixed-Price Construction) (APR 1984)

452.211-73 Attachments to Statements of Work/Specifications 452.232-70 Reimbursement for Bond Premiums – Fixed-Price Construction Contracts (NOV 1996) 452.236-71 Prohibition Against the Use of Lead-Paint (NOV 1996) 452.236-72 Use of Premises (NOV 1996) 452.236-73 Archeological or Historic Sites (FEB 1988) 452.236-74 Control of Erosion, Sedimentation and Pollution (NOV 1996) 452.236-76 Samples and Certificates (FEB 1988) 452.236-77 Emergency Response (NOV 1996) 452.236-78 Fire Suppression and Liability (MAY 2014) 452.237-70 Loss, Damage, Destruction or Repair (FEB 1988)

52.204-6 UNIQUE ENTITY IDENTIFIER (OCT 2016)

(a) Definition. As used in this provision-

Electronic Funds Transfer (EFT) indicator means a four-character suffix to the unique entity identifier. The suffix is assigned at the discretion of the commercial, nonprofit, or Government entity to establish additional System for Award Management records for identifying alternative EFT accounts (see subpart 32.11) for the same entity.

Unique entity identifier means a number or other identifier used to identify a specific commercial, nonprofit, or Government entity. See www.sam.gov for the designated entity for establishing unique entity identifiers.

(b) The Offeror shall enter, in the block with its name and address on the cover page of its offer, the annotation "Unique Entity Identifier" followed by the unique entity identifier that identifies the Offeror's name and address exactly as stated in the offer. The Offeror also shall enter its EFT indicator, if applicable.

(c) If the Offeror does not have a unique entity identifier, it should contact the entity designated at www.sam.gov for establishment of the unique entity identifier directly to obtain one. The Offeror should be prepared to provide the following information:

(1) Company legal business name.

(2) Tradestyle, doing business, or other name by which your entity is commonly recognized.

(3) Company physical street address, city, state and Zip Code.

(4) Company mailing address, city, state and Zip Code (if separate from physical).

(5) Company telephone number.

(6) Date the company was started.

(7) Number of employees at your location.

(8) Chief executive officer/key manager.

(9) Line of business (industry).

(10) Company headquarters name and address (reporting relationship within your entity).

(End of provision) https://www.acquisition.gov/far/part-32#FAR_Subpart_32_11 http://www.sam.gov/

52.204-7 SYSTEM FOR AWARD MANAGEMENT (OCT 2018)

(a) Definitions. As used in this provision— “Electronic Funds Transfer (EFT) indicator means a four-character suffix to the unique entity identifier. The suffix is assigned at the discretion of the commercial, nonprofit, or Government entity to establish additional System for Award Management records for identifying alternative EFT accounts (see subpart 32.11) for the same entity.

Registered in the System for Award Management (SAM) means that–

(1) The Offeror has entered all mandatory information, including the unique entity identifier and the EFT indicator, if applicable, the Commercial and Government Entity (CAGE) code, as well as data required by the Federal Funding Accountability and Transparency Act of 2006 (see subpart 4.14) into SAM

(2) The offeror has completed the Core, Assertions, and Representations and Certifications, and Points of Contact sections of the registration in SAM;

(3) The Government has validated all mandatory data fields, to include validation of the Taxpayer Identification Number (TIN) with the Internal Revenue Service (IRS). The offeror will be required to provide consent for TIN validation to the Government as a part of the SAM registration process; and

(4) The Government has marked the record “Active”.

Unique entity identifier means a number or other identifier used to identify a specific commercial, nonprofit, or

Government entity. See www.sam.gov for the designated entity for establishing unique entity identifiers.

(b)

(1) An Offeror is required to be registered in SAM when submitting an offer or quotation, and shall continue to be registered until time of award, during performance, and through final payment of any contract, basic agreement, basic ordering agreement, or blanket purchasing agreement resulting from this solicitation.

(2) The Offeror shall enter, in the block with its name and address on the cover page of its offer, the annotation “Unique Entity Identifier” followed by the unique entity identifier that identifies the Offeror's name and address exactly as stated in the offer. The Offeror also shall enter its EFT indicator, if applicable. The unique entity identifier will be used by the Contracting Officer to verify that the Offeror is registered in the SAM.

(c) If the Offeror does not have a unique entity identifier, it should contact the entity designated at www.sam.gov for establishment of the unique entity identifier directly to obtain one. The Offeror should be prepared to provide the following information:

(1) Company legal business name.

(2) Tradestyle, doing business, or other name by which your entity is commonly recognized.

(3) Company physical street address, city, state, and Zip Code.t

(4) Company mailing address, city, state and Zip Code (if separate from physical).

(5) Company telephone number.

(6) Date the company was started.

(7) Number of employees at your location.

(8) Chief executive officer/key manager.

(9) Line of business (industry).

(10) Company headquarters name and address (reporting relationship within your entity).

(d) Processing time should be taken into consideration when registering. Offerors who are not registered in SAM should consider applying for registration immediately upon receipt of this solicitation. See https://ww.sam.gov for information on registration.

(End of provision)

452.228-71 INSURANCE COVERAGE (NOV 1996)

Pursuant to FAR clause 52.228-5, Insurance-Work on a Government Installation, the Contractor will be required to present evidence to show, as a minimum, the amounts of insurance coverage indicated below:

(a) Workers Compensation and Employer's Liability. The Contractor is required to comply with applicable Federal and State workers' compensation and occupational disease statutes. If occupational diseases are not compensable under those statutes, they shall be covered under the employer's liability section of the insurance policy, except when contract operations are so commingled with a Contractor's commercial operations that it would not be practical to require this coverage.

Employer's liability coverage of at least $100,000 shall be required, except in States with exclusive or monopolistic funds that do not permit worker's compensation to be written by private carriers.

https://www.acquisition.gov/content/part-32-contract-financing#i1080713 https://www.acquisition.gov/content/part-4-administrative-and-information-matters#i1121746 http://www.sam.gov/

(b) General Liability. The Contractor shall have bodily injury liability insurance coverage written on a comprehensive form of policy of at least $500,000 per occurrence

(c) Automobile Liability. The Contractor shall have automobile liability insurance written on a comprehensive form of policy.

The policy shall provide for bodily injury and property damage liability covering the operation of all automobiles used in connection with performing the contract. Policies covering automobiles operated in the United States shall provide coverage of at least $200,000 per person and 500,000 per occurrence for bodily injury and $20,000 per occurrence for property damage or loss.

(d) Aircraft Public and Passenger Liability. When aircraft are used in connection with performing the contract, the Contractor shall have aircraft public and passenger liability insurance. Coverage shall be at least $200,000 per person and $500,000 per occurrence for bodily injury, other than passenger injury. Coverage for passenger injury shall be at least $200,000 multiplied by the number of seats or passengers, whichever is greater.

(End of Clause)

Order of Precedence--Construction

Any inconsistency in this solicitation or contract shall be resolved by giving precedence in the following order:

(1) The Schedule (excluding the specifications)

(2) Representations and Other Instructions

(3) Contract Clauses

(4) Other Documents, Exhibits, and Attachments

(5) The Specifications

(6) Drawings

PART III--LIST OF DOCUMENTS, EXHIBITS, AND OTHER ATTACHMENTS

SECTION J--LIST OF ATTACHMENTS

EXHIBIT 1 U.S. DEPT. OF LABOR, DAVIS-BACON WAGE DETERMINATION

EXHIBIT 2 USDA BIOPREFERRED PROGRAM

EXHIBIT 3 SPECIFICATIONS SABINO VIC AND PALISADES VIC WINDOW REPLACEMENT – 19

PAGES (INCORPORATED AS ATTACHED ELECTRONIC DOCUMENT)

EXHIBIT 1 WAGE DETERMINATION NO. AZ

"General Decision Number: AZ20210032 03/05/2021

Superseded General Decision Number: AZ20200032

State: Arizona

Construction Type: Building

County: Pima County in Arizona.

BUILDING CONSTRUCTION PROJECTS (does not include single family homes or apartments up to and including 4 stories).

County: Pima County in Arizona.

BUILDING CONSTRUCTION PROJECTS (does not include single family homes or apartments up to and including 4 stories).

Note: Under Executive Order (EO) 13658, an hourly minimum wage of $10.95 for calendar year 2021 applies to all contracts subject to the Davis-Bacon Act for which the contract is awarded (and any solicitation was issued) on or after January 1, 2015.

If this contract is covered by the EO, the contractor must pay all workers in any classification listed on this wage determination at least $10.95 per hour (or the applicable wage rate listed on this wage determination, if it is higher) for all hours spent performing on the contract in calendar year 2021. If this contract is covered by the EO and a classification considered necessary for performance of work on the contract does not appear on this wage determination, the contractor must pay workers in that classification at least the wage rate determined through the conformance process set forth in 29 CFR 5.5(a)(1)(ii) (or the EO minimum wage rate, if it is higher than the conformed wage rate). The EO minimum wage rate will be adjusted annually. Please note that this EO applies to the above-mentioned types of contracts entered into by the federal government that are subject to the Davis-Bacon Act itself, but it does not apply to contracts subject only to the Davis-Bacon Related Acts, including those set forth at 29 CFR 5.1(a)(2)-(60). Additional information on contractor requirements and worker protections under the EO is available at www.dol.gov/whd/govcontracts.

Modification Number Publication Date 0 01/01/2021 1 03/05/2021

ASBE0073-002 08/01/2020

Rates Fringes

ASBESTOS WORKER/HEAT & FROST

INSULATOR........................$ 42.83 14.53

CARP1327-001 07/01/2019

Rates Fringes

CARPENTER (Drywall Hanging Only)............................$ 26.24 8.86

* ELEC0570-010 12/01/2020

Rates Fringes

ELECTRICIAN (Including Low Voltage Wiring)..................$ 28.62 18%+6.00

ZONE DEFINITIONS-

Zone A: the area within a thirty-nine (39) mile radius from a basing point at the Tucson Town Hall.

Zone B: 40 to 74 mile radius from the town hall in Tucson- an additional $ 3.50 per hour Zone C: 75 mile radius from the town hall in Tucson to the outer limits of the geographic jurisdiction- an additional $ 7.50 per hour

ENGI0428-014 06/01/2020

Rates Fringes

POWER EQUIPMENT OPERATOR

(1) Oiler...................$ 27.04 11.72

IRON0075-003 08/01/2019

Rates Fringes

IRONWORKER, STRUCTURAL...........$ 27.80 19.05

Zone 1: 0 to 50 miles from City Hall in Phoenix or Tucson Zone 2: 050 to 100 miles - Add $4.00 Zone 3: 100 to 150 miles - Add $5.00 Zone 4: 150 miles & over - Add $6.50

LABO1184-010 06/01/2020

Rates Fringes

LABORER (MASON TENDER-BRICK).....$ 21.63 6.06

PLUM0469-007 01/01/2020

Rates Fringes

PLUMBER/PIPEFITTER

Coconino, Maricopa, and Yuma Counties...............$ 38.25 17.15 Pima County.................$ 38.25 17.15

SUAZ2012-021 05/30/2012

Rates Fringes

BRICKLAYER.......................$ 21.00 0.00

CARPENTER, Excludes Drywall Finishing/Taping, Drywall Hanging, and Form Work...........$ 20.25 2.87

CEMENT MASON/CONCRETE FINISHER...$ 19.16 0.00

FENCE ERECTOR....................$ 12.99 0.00

FORM WORKER......................$ 15.89 0.00

GLAZIER..........................$ 16.43 1.99

INSTALLER - SIGN.................$ 17.00 0.33

IRONWORKER, ORNAMENTAL...........$ 18.43 0.00

IRONWORKER, REINFORCING..........$ 15.19 0.00

LABORER: Common or General......$ 12.95 0.00

LABORER: Landscape & Irrigation.......................$ 10.22 0.39

LABORER: Mason Tender - Cement/Concrete..................$ 17.63 1.40

LABORER: Pipelayer..............$ 15.09 0.80

LABORER: Power Tool Operator....$ 14.85 4.20

MASON - STONE....................$ 15.84 2.38

OPERATOR:

Backhoe/Excavator/Trackhoe.......$ 16.79 2.03

OPERATOR: Bulldozer.............$ 20.54 6.31

OPERATOR: Crane.................$ 25.25 5.58

OPERATOR: Drill Rig Caissons....$ 19.06 2.39

OPERATOR: Drill.................$ 19.16 0.00

OPERATOR: Forklift..............$ 17.93 0.00

OPERATOR: Grader/Blade..........$ 21.39 4.26

OPERATOR: Loader (Front End)....$ 15.00 0.00

OPERATOR: Paver (Asphalt, Aggregate, and Concrete).........$ 21.00 3.77

OPERATOR: Roller................$ 21.67 0.00

OPERATOR: Scraper...............$ 21.41 0.00

OPERATOR: Screed................$ 22.17 4.42

OPERATOR: Trencher..............$ 16.24 1.34

PAINTER (Drywall Finishing/Taping Only)...........$ 15.72 2.20

PAINTER: Brush, Roller, Spray and Steel..................$ 16.31 0.00

PLASTERER........................$ 15.00 0.00

ROOFER, Includes Waterproofing, and Installation of Metal Roofs......$ 15.32 2.11

SHEET METAL WORKER, Includes HVAC Duct Installation...........$ 17.12 1.94

SPRINKLER FITTER (Fire Sprinklers)......................$ 22.27 7.76

TILE FINISHER....................$ 12.50 0.00

TILE SETTER......................$ 18.92 1.24

TRUCK DRIVER: Dump Trucks.......$ 15.50 0.00

TRUCK DRIVER: Water Truck.......$ 15.62 4.21

WELDERS - Receive rate prescribed for craft performing operation to which welding is incidental.

Note: Executive Order (EO) 13706, Establishing Paid Sick Leave for Federal Contractors applies to all contracts subject to the Davis-Bacon Act for which the contract is awarded (and any solicitation was issued) on or after January 1, 2017. If this contract is covered by the EO, the contractor must provide employees with 1 hour of paid sick leave for every 30 hours they work, up to 56 hours of paid sick leave each year. Employees must be permitted to use paid sick leave for their own illness, injury or other health-related needs, including preventive care; to assist a family member (or person who is like family to the employee) who is ill, injured, or has other health-related needs, including preventive care; or for reasons resulting from, or to assist a family member (or person who is like family to the employee) who is a victim of, domestic violence, sexual assault, or stalking. Additional information on contractor requirements and worker protections under the EO is available at www.dol.gov/whd/govcontracts.

Unlisted classifications needed for work not included within the scope of the classifications listed may be added after award only as provided in the labor standards contract clauses (29CFR 5.5 (a) (1) (ii)).

The body of each wage determination lists the classification and wage rates that have been found to be prevailing for the cited type(s) of construction in the area covered by the wage determination. The classifications are listed in alphabetical order of ""identifiers"" that indicate whether the particular rate is a union rate (current union negotiated rate for local), a survey rate (weighted average rate) or a union average rate (weighted union average rate).

Union Rate Identifiers

A four letter classification abbreviation identifier enclosed in dotted lines beginning with characters other than ""SU"" or ""UAVG"" denotes that the union classification and rate were prevailing for that classification in the survey. Example:

PLUM0198-005 07/01/2014. PLUM is an abbreviation identifier of the union which prevailed in the survey for this classification, which in this example would be Plumbers. 0198 indicates the local union number or district council number where applicable, i.e., Plumbers Local 0198. The next number, 005 in the example, is an internal number used in processing the wage determination. 07/01/2014 is the effective date of the most current negotiated rate, which in this example is July 1, 2014.

Union prevailing wage rates are updated to reflect all rate changes in the collective bargaining agreement (CBA) governing this classification and rate.

Survey Rate Identifiers

Classifications listed under the ""SU"" identifier indicate that no one rate prevailed for this classification in the survey and the published rate is derived by computing a weighted average rate based on all the rates reported in the survey for that classification. As this weighted average rate includes all rates reported in the survey, it may include both union and non-union rates. Example: SULA2012-007 5/13/2014. SU indicates the rates are survey rates based on a weighted average calculation of rates and are not majority rates. LA indicates the State of Louisiana. 2012 is the year of survey on which these classifications and rates are based. The next number, 007 in the example, is an internal number used in producing the wage determination. 5/13/2014 indicates the survey completion date for the classifications and rates under that identifier.

Survey wage rates are not updated and remain in effect until a new survey is conducted.

Union Average Rate Identifiers

Classification(s) listed under the UAVG identifier indicate that no single majority rate prevailed for those classifications;

however, 100% of the data reported for the classifications was union data. EXAMPLE: UAVG-OH-0010 08/29/2014. UAVG indicates that the rate is a weighted union average rate. OH indicates the state. The next number, 0010 in the example, is an internal number used in producing the wage determination. 08/29/2014 indicates the survey completion date for the classifications and rates under that identifier.

A UAVG rate will be updated once a year, usually in January of each year, to reflect a weighted average of the current negotiated/CBA rate of the union locals from which the rate is based.

WAGE DETERMINATION APPEALS PROCESS

1.) Has there been an initial decision in the matter? This can be:

* an existing published wage determination

* a survey underlying a wage determination

* a Wage and Hour Division letter setting forth a position on a wage determination matter

* a conformance (additional classification and rate) ruling

On survey related matters, initial contact, including requests for summaries of surveys, should be with the Wage and Hour Regional Office for the area in which the survey was conducted because those Regional Offices have responsibility for the Davis-Bacon survey program.