Questions and Answers.docx
DOCX document 23 KB Posted
- Solicitation number
- 12639521Q0172
View the file
Other files
| File | Type | Posted |
|---|---|---|
| Brogan Site 3.jpg | JPG image | |
| Brogan Site 2.jpg | JPG image | |
| Rigler Site 2.jpg | JPG image | |
| Rigler Site 1.jpg | JPG image | |
| Brogan Site 1.jpg | JPG image | |
| 12639521Q0172.pdf | ||
| DOL wage rates MT20210045.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
What is the OD of the horizontal lines on the existing prototype fence in the photos (1", 1 1/2")? 1 ¼” Do horizontals need to be welded or as appears clamped? Welded What is required spacing between line posts? 10’ Is it OK to drive line posts or must they be set on concrete? Driving is ok in most places, any gate posts will be in concrete.
Appears stays may be welded and evenly spaced between line posts, is 1/2" rod acceptable? Yes it is ½” Is a larger diameter terminal/end post required? Yes, line posts are 4” (1/4 wall), 6” corner posts in high stress areas 4"/5"/6"?
We have built many of oilfield surplus tubing/drillstem, is that allowed? Only if it is clean and free of excess debris, approved by us prior to use.
Are you OK with ELITE brand electronic gate operators? Possibly, don’t know what they are.
File details come from the government source that posted it. Updated .