Attachment_02_Statement_of_Work_Greenhouse.docx
DOCX document 14 KB Posted
- Attached to
- Greenhouse Maintenance Stoneville, MS
- Solicitation number
- 12456819Q0023
About this file
Statement of Work
View the file
Other files
| File | Type | Posted |
|---|---|---|
| Attachment__Frequency_Schedule_Greenhouse_Maintenance.xlsx | XLSX spreadsheet | |
| Attachment_04_Experience_Questionairre_(004).docx | DOCX document | |
| Attachment_00_12456819Q0023_Bid_Schedule.xlsx | XLSX spreadsheet | |
| Attachment_01_Wage_Rates.pdf | ||
| Attachment_03_SRS_Policy_on_Prevention_of_Workplace_Violence-Contractors__Cooperators.._.pdf | ||
| SF1449_RFQ_12456819Q0023_Greenhouse_Maintenance.pdf | ||
| Solicitation_Body.docx | DOCX document |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Statement of Work
Maintenance on 4,680 square-feet greenhouse Southern Hardwoods Laboratory Stoneville, MS
Summary of work
Contractor will perform an annual inspection/servicing on the large greenhouse at the Southern Hardwoods Laboratory, 432 Stoneville Road, Stoneville, Mississippi. Contractor is to provide all materials, tools, labor, supervision, transportation, and all incidental items needed to perform maintenance and repair on the large greenhouse. All waste materials shall become property of the contractor and be removed from Government premises. Any additional charges related to non-routine maintenance and repair shall be presented in advance for approval. Work schedule shall be coordinated with Emile Gardiner, phone (662) 336-4820.
Work items
Exhaust fan inspection/service: Contractor is to verify operation of 4 exhaust fans, clean screen guards, clean and lubricate shutter blades, tighten/replace drive belts, clean propeller blades.
Horizontal Air Flow fan system inspection/service: Contractor is to inspect 4 HAF fans for proper operation, clean guards and propeller blades, and lubricate bearings (if applicable).
Roof vent system inspection/service: Contractor is to service 4 vent machines and 4 vents comprising the roof vent system, inspect shafting (drive system), verify operation, adjust open/close limits, lubricate each shaft hanger, lubricate each rack/pinion, and grease/oil gearbox (if applicable)
Side vent system inspection/service: Contractor is to service 2 vent machines and 2 vents comprising the side/gable vent system, inspect shafting (drive system), verify operation, adjust open/close limits, lubricate each shaft hanger, lubricate each rack/pinion, and grease/oil gearbox (if applicable).
Evaporative cooling system inspection/service: Contractor is to inspect and service 2 evaporative cooling systems, check for proper operation, and clean pads with stiff bristle brush.
Heater system inspection/service: Contractor is to inspect and service 4 unit heaters, check for proper operation, clean guards and propeller blades, check flue pipes and remove blockage, and clean heater cases.
Insect screen inspection/service: Contractor is to inspect roof vent and side/gable screens for damage, and clean screens of dirt and dust.
Greenhouse controls inspection/service: Contractor is to clean/replace filters in aspirator of 2 sensor controls and verify that the equipment stages correctly.
Roof gutter inspection/service: Contractor is to inspect 220 linear feet of roof gutters for proper function, and clean roof gutters by removing debris and leaves from gutters.
Service Period are optional between these two months – 1 May 2020 through 30 June 2020
File details come from the government source that posted it.