Attachment_3_Statement_of_Work.docx
DOCX document 26 KB Posted
- Solicitation number
- 12455019R0025
About this file
Attachment 3 Statement of Work
View the file
Other files
| File | Type | Posted |
|---|---|---|
| Sf_30_Amendment_2.pdf | ||
| SF_30_Amendment_1.pdf | ||
| Attachment_1_SCA_Wages.pdf | ||
| Attachment_2_Schedule_of_Items.doc | DOC document | |
| SF_1449_Cont.docx | DOCX document | |
| Attachment_5_Experience_Questionairre.docx | DOCX document | |
| Attachment_6__Workforce_Certification.docx | DOCX document | |
| SF_1449.pdf | ||
| Attachment_4_Maps.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
12455019R0025 Attachment 3 Statement of Work Croatan Manual Crop Tree Release
12455019R0025 Attachment 3 Statement of Work Croatan Manual Crop Tree Release
LONGLEAF PINE MANUAL CROP TREE RELEASE BY SLASHDOWN
DESCRIPTION OF WORK
(a) SCOPE OF CONTRACT
Contractor shall furnish all labor, supervision, transportation, materials, equipment, tools, and supplies, and perform all work required to perform Longleaf Pine Crop Tree Release (CTR) by slashdown within the boundaries of the Croatan National Forest land. The Contractor shall
· Perform the Required Treatment
· Complete Self Inspection Before Requesting Government Inspection
This work shall be done in accordance with the specifications and provisions contained herein.
(b) LOCATION AND DESCRIPTION The areas to be treated are located within the boundaries of:
National Forest: Croatan Ranger District: Croatan County(ies): Carteret and Jones State: North Carolina
Thre is a total of 184 acres to be treated. See attached Vicinity and Site Maps for locations of and directions to project sites. All Area boundaries shall be marked with flagging:
All contract map locations are approximate; therefore, actual locations designated on the ground take precedence over the contract maps. Stand acres are estimated, so total acers may be plus or minus the estimated acres.
(c) GOVERNMENT PROVIDED EQUIPMENT
The Government shall provide flagging if needed.
TECHNICAL SPECIFICATIONS
(a) TREES TO BE CUT
Release treatment shall consist of locating longleaf pine seedlings, saplings and pole timber and then cutting all other woody stems less than 8” DBH regardless of proximity to longleaf.
(b) TREES NOT TO BE CUT
The following trees are not to be cut:
-all Longleaf pine;
| -Dead trees; | -Trees designated as reserve trees; |
| -Hollow trees; | -Trees within blue boundaries (W/L incl.); |
| -Trees with dens; | -Trees marked with boundary paint; |
| -Trees larger than 8" dbh; | -Trees within 30 ft of stream channels; |
-Other trees designated by COR.
(c) SLASHDOWN PROCEDURE
The stump height of the trees and brush cut shall not exceed 6 inches.
Trees and brush that are cut will be slashed down to a height of 3 feet.
No material may be piled around the base of the longleaf pine seedlings / saplings or pole timber for a radius of one (1) foot from the bole of the tree.
Care must be taken to assure that the Contractor does not damage crop trees when cutting adjacent trees and brush.
All trees and brush that are cut will be completely severed from the stump.
AUTHORIZED PERSONNEL
The work areas are all accessible by standard pickup by way of Forest Service Roads. If there are locked gates, access will be given when work commences. There are no areas restricted to the Contractor or laborers in the vicinity of the treatment areas. There is an approximately 500 yard walk to bid Item 9 and 100 yard walk to bid item 4.
Page | 1 of 2
Page | 2 of 2
File details come from the government source that posted it.