STATEMENT OF WORK.docx
DOCX document 371 KB Posted
- Attached to
- (EN8727 & EN8203) - LIGHTS, SIREN & STRIPING
- Solicitation number
- 1240LS26Q0060
- Issued by
-
Department of Agriculture Forest Service
About this file
This is a Statement of Work for the installation of emergency lighting, siren systems, and radio equipment on two U.S. Forest Service (USFS) vehicles: a 2024 Ford F350 DRW RC UT pickup truck (Door #8727, VIN: 1FDRF3HNXREE81216) and a 2025 Chevrolet 3500 DRW RC UT pickup truck (Door #8203, VIN: 1GB3KSE72SF141875). The vendor must complete all work within 30 days of vehicle delivery. Delivery and pickup will occur within 200 road miles of 1918 Commerce Ave, Boise, ID 83705; the vendor is responsible for towing beyond this radius. A 30-day advance notice is required for vehicle delivery.
The lighting installation requirements include supplying and installing an approximately 55-inch LED strobe light bar (red/white FIRE configuration) with take-down and alley lights mounted to the roof, two LED red/white strobes in the front grill upper corners, two red LED strobes on the upper rear bed, an external siren and speaker, and a light/siren controller with park/kill and timed-out relay for battery drain protection. All lighting must be wired with truck keyswitch activation through a dedicated circuit with appropriate current protection. The siren and electronics installation requires integration of an FS-supplied BK Tech KNG M150 radio powered through an FS-supplied Charge Guard with an antenna mounted as far rearward as possible. The vendor must supply and install a 20-inch sloped wide-body heavy-duty cab center console (11-gauge welded steel construction) with a radio model-specific mounting faceplate, dual cup holder, light/siren control mounting faceplate, two magnetic mic holders, a 9-inch external locking storage box, two adjustable armrests, and console wiring with two 12-volt outlets and two USB outlets. Striping is not required on either vehicle.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| SOLICITATION - 1240LS26Q0060.docx | DOCX document |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Vehicle Information:
Door # 8727 - 2024 Ford F350 DRW RC UT pickup truck, VIN: 1FDRF3HNXREE81216 License Plate # A403059:
Door # 8203 – 2025 Chevrolet 3500 DRW RC UT pickup truck, VIN:1GB3KSE72SF141875; Plate# A403071:
Delivery Location:
USFS will deliver and pick up the vehicle within 200 road miles of: 1918 Commerce Ave Boise, ID 83705. Vendor will have to tow to and from beyond 200 miles of this location.
Notice:
A 30-Day notice will be required for delivery of the vehicle to vendor. Vendor must complete work on the vehicle within 30 days of delivery to the vendor.
Requirements: Lightbar Supply and install light bar, grill lights, rear lights, and siren/speaker/control head with truck keyswitch “On” activated power, dedicated circuit with appropriate current protection.
--Supply and install LED strobe light bar, approx. 55 inches, red/white FIRE, take down and alley lights, amber directional traffic lights, mounted to roof (see attached sheet for configuration) with lowest profile and rearward as possible.
--Supply and install two (6) LED red/white strobes in upper corners of front grill --Supply and install two red LED strobe lights on upper rear of bed --Supply and install external siren and speaker --Supply and install light and siren controller --Park/kill & timed out relay for battery drain protection
Requirements: Siren & Electronics: Siren, Radios, and Console Install FS Supplied Radio Package into center console. BK Tech KNG M150 Powered through FS supplied Charge Guard (battery drain protector). Antenna roof mounted as far rearward as possible. Unit in console with correct mount plate. KNG-M150 single piece mobile with it for installation. The radio will need to be on a charge guard set/wired for ignition control, and on its own fuse. Along with the radio USFS will provide the antenna, coax, connector, and charge guard. The installer will need to order and provide the appropriate face plate to match the console brand. Hole alignments vary so they aren’t universal.
Supply and install sloped wide-body heavy duty cab center console with appropriate vehicle specific mounting plate and options specified below --One 20” sloped wide-body heavy duty console, 11 gauge welded steel construction --One internal dual cup holder --Radio model specific mounting faceplate(s) as needed --One light/siren control mounting faceplate for controller provided --Supply two magnetic mic holders for radio and siren controller microphones mounted to console --One 9” external wide-body locking storage box attached to rear of primary console --Two 9” height adjustable arm rests mounted to console sides --Console wired with two 12-volt outlets and two USB outlets, individual fuse protected power supply for mobile radios, power supply for lights/siren controller wired with truck “on”
Requirements: Striping:
NONE
image1.png image2.png
File details come from the government source that posted it. Updated .