1240LR24Q0033 Syn-Sol.pdf

Solicitation 1240LR24Q0033 Page 1 of 19

(i) This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; proposals are being requested and a written solicitation will not be issued.

(ii) This solicitation is issued as an _RFQ_______. (Invitation to Bid (IFB), Request for Quotation (RFQ), or Request for Proposal (RFP)).

(iii) The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2022-04.

(iv) This procurement is set aside for __Small Business___________. The NAICS code is __321114___ and the Small Business Size Standard is _500___________.

Item No. Description

*Method Of

Measure Unit Est.

Quantity Unit Price Total Price

0001 Treated Structural Timber, Glued Laminated Bridge System Complete

Includes furnishing, fabricating, and treating structural timber, including all required yard lumber needed to render a complete bridge system. Also includes furnishing all required anchoring/fastening hardware, structural steel, bearing shoes/pads, tie-rod

LSQ Lump Sum

TOTAL PRICE (ALL ITEMS) $_______________

* Designated Method of Measurement:

AQ – Actual Quanties; CQ – Contract Quantities; LSQ - Lump Sum Quantities

Solicitation 1240LR24Q0033 Page 2 of 19

(vi) Description of Requirement (including a list of any attachments)

A. Description of Work Furnish, fabricate, and treat structural timber, including all required yard lumber needed to render one complete glued-laminated stringer type trail bridge system having treated timber curb rails. Furnish all required anchoring/fastening hardware including but not limited to anchor bolts, lag screws, malleable iron washers, nails, plate washers, bearing shoes with elastomeric pads, gabion baskets, and other structural steel as required to render a complete bridge system, delivered to the Material Staging Area location noted on the Drawings.

B. Delivery Location Deliver the complete bridge system to the Material Staging Area location noted on the Drawings. The Material Staging Area is located approximately 10 miles from the Ketchum Ranger District Office in Ketchum, Idaho, via State Highway 75 and Greenhorn Gulch Road. Coordinate material delivery with Braidy Richins at 208.731.0176 or by email at braidy.richins@usda.gov a minimum of 48 hours prior to delivery. Thursday and Friday deliveries are not permitted.

C. Required Delivery Date The week of May 13, 2024, no later than May 31th, unless approved otherwise by the Contracting Officer.

Spring site conditions may result in the delivery date needing to extend into early summer to avoid ground disturbance. This determination will be made by the Contracting Officer in advance of the anticipated early-May delivery date as noted above.

D. Contract Time The Contractor shall (a) commence work under this contract within 10 calendar days after the date the Contractor receives the Notice to Proceed; (b) prosecute the work diligently; and (c) supply all the bridge system materials by the above noted “required delivery date”.

E. Inspection and Acceptance Inspection of the delivered material will be made by the Contracting Officer’s Representative. Materials not completed in accordance with the Contract Documents shall be replaced without additional compensation to the Supplier.

mailto:braidy.richins@usda.gov

Solicitation 1240LR24Q0033 Page 3 of 19

Responding businesses will have NAICS code 321114 in their SAM portfolio or will add the code before award of contract. Please completely fill the RFQ document (each section) and return to andrea.marks-cash@usda.gov by the indicated response date and time. See two attachments below for detailed sizes.

(vii) Date(s) and Place(s) of Delivery and Acceptance/Location

Delivery by 05/31/20242, 10 miles from the Ketchum Ranger District Office in Ketchum, Idaho, via State Highway 75 and Greenhorn Gulch Road, Sawtooth National Forest, Idaho

(viii) List of Specifications

Federal Highway Administration Standard Specifications for Construction of Roads and Bridges on Federal Highway Projects (FP-14) and the attached Forest Service Supplemental Specifications (FSSS) are applicable to this Contract. All specifications not included in the specification listing but referenced by listed specifications are applicable. Standard Specifications (FP-14) are available in pdf format on-line at https://highways.dot.gov/federal-lands/specs .

mailto:jason.king2@usda.gov mailto:jason.king2@usda.gov mailto:andrea.marks-cash@usda.gov https://highways.dot.gov/federal-lands/specs https://highways.dot.gov/federal-lands/specs

Solicitation 1240LR24Q0033 Page 4 of 19

CLAUSES and PROVISIONS

(viiii) 52.212-1 Instructions to Offerors – Commercial Products and Commercial Services (NOV 2021) (Provision) Addenda to provision 52.212-1:

1) Offerors must have an active entity registration in the System for Award Management in order to submit an offer. https://www.sam.gov/SAM/

2) Offers submitted in response to this solicitation shall include aa price proposal and representations and certifications.

b) Price Proposal – Include the following: 1) completed, signed SF-1449 from Section A of this solicitation, 2) Acknowledge any amendments issued on sam.gov for this solicitation by completing and signing the posted SF-30, and 3) Include the completed price schedule contained in Section B of this solicitation.

c) Representations and Certifications – Fill in the check boxes for provisions 52.204-24, 52.209-7, 52.212-3, and Employment of Eligible Workers-Workforce Certification found in Section F of this solicitation and include a copy with your offer.

2) 2) Submit offer by email to andrea.marks-cash@usda.gov so that it is delivered into this inbox by the due date and time. Emails should contain 2 separate attachments (Price Proposal, and Representations and Certifications) in Microsoft Word or Adobe PDF format. Be aware that large attachments may increase the time required to deliver an email. It is the offerors responsibility to confirm receipt of the offer from Andrea Marks-Cash.

3) Address questions about this solicitation to Andrea Marks-Cash at andrea.marks-cash@usda.gov.

(x) 52.212-2 Evaluation –Commercial Products and Commercial Services (NOV 2021) (Provision)

(a) The Government will award a contract resulting from this solicitation to the responsible offeror whose offer conforming to the solicitation will be most advantageous to the Government, price and other factors considered. The following factors shall be used to evaluate offers: Best value to include price.

(b) A written notice of award or acceptance of an offer, mailed or otherwise furnished to the successful offeror within the time for acceptance specified in the offer, shall result in a binding contract without further action by either party. Before the offer’s specified expiration time, the Government may accept an offer (or part of an offer), whether or not there are negotiations after its receipt, unless a written notice of withdrawal is received before award.

https://www.sam.gov/SAM/

Solicitation 1240LR24Q0033 Page 5 of 19

(xi) 52.212-3 Offeror Representations and Certifications – Commercial Products and Commercial Services (NOV 2021) (DEVIATION JUL 2020) (Provision)

(xii) 52.212-5 Contract Terms and Conditions Required to Implement Statutes or Executive Orders – Commercial Products and Commercial Services (JAN 2022) (DEVIATION JUL 2020)

(a) The Contractor shall comply with the following Federal Acquisition Regulation (FAR) clauses, which are incorporated in this contract by reference, to implement provisions of law or Executive orders applicable to acquisitions of commercial products and commercial services:

(1) 52.203-19, Prohibition on Requiring Certain Internal Confidentiality Agreements or Statements (Jan 2017) (section 743 of Division E, Title VII, of the Consolidated and Further Continuing Appropriations Act, 2015 (Pub. L. 113-235) and its successor provisions in subsequent appropriations acts (and as extended in continuing resolutions)).

(2) 52.204-23, Prohibition on Contracting for Hardware, Software, and Services Developed or Provided by Kaspersky Lab and Other Covered Entities (Nov 2021) (Section 1634 of Pub. L.

115-91).

(3) 52.204-25, Prohibition on Contracting for Certain Telecommunications and Video Surveillance Services or Equipment. (Nov 2021) (Section 889(a)(1)(A) of Pub. L. 115-232).

(4) 52.209-10, Prohibition on Contracting with Inverted Domestic Corporations (Nov 2015)

(5) 52.233-3, Protest After Award (Aug 1996) (31 U.S.C. 3553).

(6) 52.233-4, Applicable Law for Breach of Contract Claim (Oct 2004) (Public Laws 108-77 and 108-78 (19 U.S.C. 3805note)).

(b) The Contractor shall comply with the FAR clauses in this paragraph (b) that the Contracting Officer has indicated as being incorporated in this contract by reference to implement provisions of law or Executive orders applicable to acquisitions of commercial products and commercial services:

[Contracting Officer check as appropriate.] ☐ (1) 52.203-6, Restrictions on Subcontractor Sales to the Government (June 2020), with

Alternate I (Oct 1995) (41 U.S.C. 4704 and 10 U.S.C. 2402).

☐ (2) 52.203-13, Contractor Code of Business Ethics and Conduct (Nov 2021) (41 U.S.C.

3509)).

☐ (3) 52.203-15, Whistleblower Protections under the American Recovery and Reinvestment

Act of 2009 (Jun 2010) (Section 1553 of Pub. L. 111-5). (Applies to contracts funded by the American Recovery and Reinvestment Act of 2009.)

☒ (4) 52.204-10, Reporting Executive Compensation and First-Tier Subcontract Awards (Jun 2020) (Pub. L. 109-282) (31 U.S.C. 6101 note).

☐ (5) [Reserved].

☐ (6) 52.204-14, Service Contract Reporting Requirements (Oct 2016) (Pub. L. 111-117, section

743 of Div. C).

☐ (7) 52.204-15, Service Contract Reporting Requirements for Indefinite-Delivery Contracts

(Oct 2016) (Pub. L. 111-117, section 743 of Div. C).

☒ (8) 52.209-6, Protecting the Government’s Interest When Subcontracting with Contractors

Debarred, Suspended, or Proposed for Debarment. (Nov 2021) (31 U.S.C. 6101note).

Solicitation 1240LR24Q0033 Page 6 of 19

☐ (9) 52.209-9, Updates of Publicly Available Information Regarding Responsibility Matters (Oct 2018) (41 U.S.C. 2313).

☐ (10) [Reserved].

☐ (11) (i) 52.219-3, Notice of HUBZone Set-Aside or Sole-Source Award (Sep 2021) (15

U.S.C.657a).

☐ (12) (i) 52.219-4, Notice of Price Evaluation Preference for HUBZone Small Business

Concerns (Sep 2021) 15 U.S.C. 657a).

☐ (13) [Reserved] ☒ (14) (i) 52.219-6, Notice of Total Small Business Set-Aside (Nov 2020) (15 U.S.C.644).

☐ (ii) Alternate I (Mar 2020) of 52.219-6.

☐ (15) (i) 52.219-7, Notice of Partial Small Business Set-Aside (Nov 2020) (15 U.S.C. 644).

☐ (ii) Alternate I (Mar 2020) of 52.219-7.

☐ (16) 52.219-8, Utilization of Small Business Concerns (Oct 2018) (15 U.S.C. 637(d)(2) and

(3)).

☐ (17) (i) 52.219-9, Small Business Subcontracting Plan (Nov 2021) (15 U.S.C. 637(d)(4)).

☐ (ii) Alternate I (Nov 2016) of 52.219-9.

☐ (iii) Alternate II (Nov 2016) of 52.219-9.

☐ (iv) Alternate III (Jun 2020) of 52.219-9.

☐ (v) Alternate IV (Sep 2021) of 52.219-9.

☐ (18) (i) 52.219-13, Notice of Set-Aside of Orders (Mar 2020) (15 U.S.C. 644(r)).

☐ (ii) Alternate I (MAR 2020) of 52.219-13

☐ (19) 52.219-14, Limitations on Subcontracting (Sep 2021) (15 U.S.C.637s) [Contracting Officer check as appropriate.]

☐ By the end of the base term of the contract and then by the end of each subsequent option period; or ☐ By the end of the performance period for each order issued under the contract.

☐ (20) 52.219-16, Liquidated Damages-Subcontracting Plan (Sep 2021) (15 U.S.C.

637(d)(4)(F)(i)).

☐ (21) 52.219-27, Notice of Service-Disabled Veteran-Owned Small Business Set-Aside (Sep 2021) (15 U.S.C. 657f).

☒ (22) (i) 52.219-28, Post Award Small Business Program Rerepresentation (Sep 2021) (15 U.S.C. 632(a)(2)).

☐ (ii) Alternate I (MAR 2020) of 52.219-28.

☐ (23) 52.219-29, Notice of Set-Aside for, or Sole Source Award to, Economically Disadvantaged Women-Owned Small Business Concerns (Sep 2021) (15 U.S.C. 637(m)).

☐ (24) 52.219-30, Notice of Set-Aside for, or Sole Source Award to, Women-Owned Small Business Concerns Eligible Under the Women-Owned Small Business Program (Sep 2021) (15 U.S.C. 637(m)).

☐ (25) 52.219-32, Orders Issued Directly Under Small Business Reserves (Mar 2020) (15 U.S.C. 644(r)).

☐ (26) 52.219-33, Nonmanufacturer Rule (Sep 2021) (15 U.S.C. 637(a)(17)).

☒ (27) 52.222-3, Convict Labor (Jun 2003) (E.O.11755).

Solicitation 1240LR24Q0033 Page 7 of 19

☒ (28) 52.222-19, Child Labor-Cooperation with Authorities and Remedies (Jan 2022)

(DEVIATION JUL 2020) (E.O.13126).

☒ (29) 52.222-21, Prohibition of Segregated Facilities (Apr 2015).

☒ (30) (i) 52.222-26, Equal Opportunity (Sep 2016) (E.O.11246).

☐ (ii) Alternate I (Feb 1999) of 52.222-26.

☐ (31) (i) 52.222-35, Equal Opportunity for Veterans (Jun 2020) (38 U.S.C. 4212).

☐ (ii) Alternate I (Jul 2014) of 52.222-35.

☒ (32) (i) 52.222-36, Equal Opportunity for Workers with Disabilities (Jun 2020) (29

U.S.C.793).

☐ (ii) Alternate I (Jul 2014) of 52.222-36.

☐ (33) 52.222-37, Employment Reports on Veterans (Jun 2020) (38 U.S.C. 4212).

☐ (34) 52.222-40, Notification of Employee Rights Under the National Labor Relations Act

(Dec 2010) (E.O. 13496).

☒ (35) (i) 52.222-50, Combating Trafficking in Persons (Nov 2021) (22 U.S.C. chapter 78 and

E.O. 13627).

☐ (ii) Alternate I (Mar 2015) of 52.222-50 (22 U.S.C. chapter78 and E.O. 13627).

☐ (36) 52.222-54, Employment Eligibility Verification (Nov 2021). (Executive Order 12989).

(Not applicable to the acquisition of commercially available off-the-shelf items or certain other types of commercial products or commercial services as prescribed in 22.1803.)

☐ (37) (i) 52.223-9, Estimate of Percentage of Recovered Material Content for EPA–Designated Items (May 2008) (42 U.S.C. 6962(c)(3)(A)(ii)). (Not applicable to the acquisition of commercially available off-the-shelf items.)

☐ (ii) Alternate I (May 2008) of 52.223-9 (42 U.S.C. 6962(i)(2)(C)). (Not applicable to the acquisition of commercially available off-the-shelf items.)

☐ (38) 52.223-11, Ozone-Depleting Substances and High Global Warming Potential Hydrofluorocarbons (Jun 2016) (E.O. 13693).

☐ (39) 52.223-12, Maintenance, Service, Repair, or Disposal of Refrigeration Equipment and Air Conditioners (Jun 2016) (E.O. 13693).

☐ (40) (i) 52.223-13, Acquisition of EPEAT®-Registered Imaging Equipment (Jun 2014) (E.O.s 13423 and 13514).

☐ (ii) Alternate I (Oct 2015) of 52.223-13.

☐ (41) (i) 52.223-14, Acquisition of EPEAT®-Registered Televisions (Jun 2014) (E.O.s 13423 and 13514).

☐ (ii) Alternate I (Jun 2014) of 52.223-14.

☐ (42) 52.223-15, Energy Efficiency in Energy-Consuming Products (May 2020) (42 U.S.C.

8259b).

☐ (43) (i) 52.223-16, Acquisition of EPEAT®-Registered Personal Computer Products (Oct 2015) (E.O.s 13423 and 13514).

☐ (ii) Alternate I (Jun 2014) of 52.223-16.

☒ (44) 52.223-18, Encouraging Contractor Policies to Ban Text Messaging While Driving (Jun 2020) (E.O. 13513).

☐ (45) 52.223-20, Aerosols (Jun 2016) (E.O. 13693).

Solicitation 1240LR24Q0033 Page 8 of 19

☐ (46) 52.223-21, Foams (Jun 2016) (E.O. 13693).

☐ (47) (i) 52.224-3 Privacy Training (Jan 2017) (5 U.S.C. 552 a).

☐ (ii) Alternate I (Jan 2017) of 52.224-3.

☒ (48) 52.225-1, Buy American-Supplies (Nov 2021) (41 U.S.C. chapter 83).

☐ (49) (i) 52.225-3, Buy American-Free Trade Agreements-Israeli Trade Act (Nov 2021)

(DEVIATION JUL 2020) (41 U.S.C. chapter 83, 19 U.S.C. 3301 note, 19 U.S.C. 2112 note, 19 U.S.C. 3805 note, 19 U.S.C. 4001 note, 19 U.S.C. chapter 29 (sections 4501-4732), Pub.

L. 103-182, 108-77, 108-78, 108-286, 108-302, 109-53, 109-169, 109-283, 110-138, 112-41, 112-42, and 112-43.

__ (ii) Alternate I (May 2014) of 52.225-3.

☐ (iii) (ii) Alternate II (Jan 2021) (DEVIATION JUL 2020) of 52.225-3.

☐ (iv) (iii) Alternate III (Jan 2021) (DEVIATION JUL 2020) of 52.225-3.

☐ (50) 52.225-5, Trade Agreements (Oct 2019) (DEVIATION JUL 2020) (19 U.S.C. 2501, et seq., 19 U.S.C. 3301 note).

☒ (51) 52.225-13, Restrictions on Certain Foreign Purchases (FEB 2021) (E.O.’s, proclamations, and statutes administered by the Office of Foreign Assets Control of the Department of the Treasury).

☐ (52) 52.225-26, Contractors Performing Private Security Functions Outside the United States (Oct 2016) (Section 862, as amended, of the National Defense Authorization Act for Fiscal Year 2008; 10 U.S.C. 2302 Note).

☐ (53) 52.226-4, Notice of Disaster or Emergency Area Set-Aside (Nov 2007) (42 U.S.C. 5150).

☐ (54) 52.226-5, Restrictions on Subcontracting Outside Disaster or Emergency Area (Nov

2007) (42 U.S.C. 5150).

☐ (55) 52.229-12, Tax on Certain Foreign Procurements (Feb 2021).

☐ (56) 52.232-29, Terms for Financing of Purchases of Commercial Products and Commercial

Services (Nov 2021) (41 U.S.C.4505, 10 U.S.C.2307(f)).

☐ (57) 52.232-30, Installment Payments for Commercial Products and Commercial Services

(Nov 2021) (41 U.S.C.4505, 10 U.S.C.2307(f)).

☒ (58) 52.232-33, Payment by Electronic Funds Transfer-System for Award Management (Oct

2018) (31 U.S.C. 3332).

☐ (59) 52.232-34, Payment by Electronic Funds Transfer-Other than System for Award

Management (Jul 2013) (31 U.S.C.3332).

☐ (60) 52.232-36, Payment by Third Party (May 2014) (31 U.S.C.3332).

☐ (61) 52.239-1, Privacy or Security Safeguards (Aug 1996) (5 U.S.C. 552a).

☐ (62) 52.242-5, Payments to Small Business Subcontractors (Jan 2017) (15 U.S.C. 637(d)(13)).

☐ (63) (i) 52.247-64, Preference for Privately Owned U.S.-Flag Commercial Vessels (Nov

2021) (46 U.S.C. 55305 and 10 U.S.C. 2631).

☐ (ii) Alternate I (Apr 2003) of 52.247-64.

☐ (iii) Alternate II (Nov 2021) of 52.247-64.

(c) The Contractor shall comply with the FAR clauses in this paragraph (c), applicable to commercial services, that the Contracting Officer has indicated as being incorporated in this contract by reference to implement provisions of law or Executive orders applicable to acquisitions of commercial products and commercial services:

Solicitation 1240LR24Q0033 Page 9 of 19

Contracting Officer check as appropriate.] ☐ (1) 52.222-41, Service Contract Labor Standards (Aug 2018) (41 U.S.C. chapter 67).

☐ (2) 52.222-42, Statement of Equivalent Rates for Federal Hires (May 2014) (29 U.S.C. 206 and 41 U.S.C. chapter 67).

In compliance with the Service Contract Labor Standards statute and the regulations of the Secretary of Labor (29 CFR Part 4), this clause identifies the classes of service employees expected to be employed under the contract and states the wages and fringe benefits payable to each if they were employed by the contracting agency subject to the provisions of 5 U.S.C.5341 or 5 332.

This Statement is for Information Only: It is not a Wage Determination

Employee Class Monetary Wage-Fringe Benefits

☐ (3) 52.222-43, Fair Labor Standards Act and Service Contract Labor Standards-Price Adjustment (Multiple Year and Option Contracts) (Aug 2018) (29 U.S.C. 206 and 41 U.S.C.

chapter 67).

☐ (4) 52.222-44, Fair Labor Standards Act and Service Contract Labor Standards-Price Adjustment (May 2014) (29 U.S.C. 206 and 41 U.S.C. chapter 67).

☐ (5) 52.222-51, Exemption from Application of the Service Contract Labor Standards to Contracts for Maintenance, Calibration, or Repair of Certain Equipment-Requirements (May 2014) (41 U.S.C. chapter 67).

☐ (6) 52.222-53, Exemption from Application of the Service Contract Labor Standards to Contracts for Certain Services-Requirements (May 2014) (41 U.S.C. chapter 67).

☐ (7) 52.222-55, Minimum Wages for Contractor Workers Under Executive Order 14026 (JAN 2022).

☐ (8) 52.222-62, Paid Sick Leave Under Executive Order 13706 (Jan 2022) (E.O. 13706).

☐ (9) 52.226-6, Promoting Excess Food Donation to Nonprofit Organizations (Jun 2020) (42

U.S.C. 1792).

(d) Comptroller General Examination of Record. The Contractor shall comply with the provisions of this paragraph (d) if this contract was awarded using other than sealed bid, is in http://uscode.house.gov/browse.xhtml;jsessionid=114A3287C7B3359E597506A31FC855B3 http://uscode.house.gov/browse.xhtml;jsessionid=114A3287C7B3359E597506A31FC855B3

Solicitation 1240LR24Q0033 Page 10 of 19 excess of the simplified acquisition threshold, as defined in FAR 2.101, on the date of award of this contract, and does not contain the clause at 52.215-2, Audit and Records-Negotiation.

(1) The Comptroller General of the United States, or an authorized representative of the Comptroller General, shall have access to and right to examine any of the Contractor’s directly pertinent records involving transactions related to this contract.

(2) The Contractor shall make available at its offices at all reasonable times the records, materials, and other evidence for examination, audit, or reproduction, until 3 years after final payment under this contract or for any shorter period specified in FAR subpart 4.7, Contractor Records Retention, of the other clauses of this contract. If this contract is completely or partially terminated, the records relating to the work terminated shall be made available for 3 years after any resulting final termination settlement. Records relating to appeals under the disputes clause or to litigation or the settlement of claims arising under or relating to this contract shall be made available until such appeals, litigation, or claims are finally resolved.

(3) As used in this clause, records include books, documents, accounting procedures and practices, and other data, regardless of type and regardless of form. This does not require the Contractor to create or maintain any record that the Contractor does not maintain in the ordinary course of business or pursuant to a provision of law.

(e) (1) Notwithstanding the requirements of the clauses in paragraphs (a), (b), (c), and (d) of this clause, the Contractor is not required to flow down any FAR clause, other than those in this paragraph (e)(1) in a subcontract for commercial products or commercial services. Unless otherwise indicated below, the extent of the flow down shall be as required by the clause-

(i) 52.203-13, Contractor Code of Business Ethics and Conduct (Nov 2021) (41 U.S.C.

3509).

(ii) 52.203-19, Prohibition on Requiring Certain Internal Confidentiality Agreements or Statements (Jan 2017) (section 743 of Division E, Title VII, of the Consolidated and Further Continuing Appropriations Act, 2015 (Pub. L. 113-235) and its successor provisions in subsequent appropriations acts (and as extended in continuing resolutions)).

(iii) 52.204-23, Prohibition on Contracting for Hardware, Software, and Services Developed or Provided by Kaspersky Lab and Other Covered Entities (Nov 2021) (Section 1634 of Pub. L. 115-91).

(iv) 52.204-25, Prohibition on Contracting for Certain Telecommunications and Video Surveillance Services or Equipment. (Nov 2021) (Section 889(a)(1)(A) of Pub. L. 115-232).

(v) 52.219-8, Utilization of Small Business Concerns (Oct 2018) (15 U.S.C.637(d)(2) and (3)), in all subcontracts that offer further subcontracting opportunities. If the subcontract (except subcontracts to small business concerns) exceeds the applicable threshold specified in FAR 19.702(a) on the date of subcontract award, the subcontractor must include 52.219-8 in lower tier subcontracts that offer subcontracting opportunities.

(vi) 52.222-21, Prohibition of Segregated Facilities (Apr 2015).

(vii) 52.222-26, Equal Opportunity (Sep 2015) (E.O.11246).

(viii) 52.222-35, Equal Opportunity for Veterans (Jun 2020) (38 U.S.C.4212).

(ix) 52.222-36, Equal Opportunity for Workers with Disabilities (Jun 2020) (29

U.S.C.793).

(x) 52.222-37, Employment Reports on Veterans (Jun 2020) (38 U.S.C.4212).

Solicitation 1240LR24Q0033 Page 11 of 19

(xi) 52.222-40, Notification of Employee Rights Under the National Labor Relations Act (Dec 2010) (E.O. 13496). Flow down required in accordance with paragraph (f) of FAR clause 52.222-40.

(xii) 52.222-41, Service Contract Labor Standards (Aug 2018) (41 U.S.C. chapter 67).

(xiii) (A) 52.222-50, Combating Trafficking in Persons (Nov 2021) (22 U.S.C. chapter 78 and E.O 13627).

(B) Alternate I (Mar 2015) of 52.222-50(22 U.S.C. chapter 78 and E.O 13627).

(xiv) 52.222-51, Exemption from Application of the Service Contract Labor Standards to

Contracts for Maintenance, Calibration, or Repair of Certain Equipment-Requirements (May 2014) (41 U.S.C. chapter 67).

(xv) 52.222-53, Exemption from Application of the Service Contract Labor Standards to Contracts for Certain Services-Requirements (May 2014) (41 U.S.C. chapter 67).

(xvi) 52.222-54, Employment Eligibility Verification (Nov 2021) (E.O. 12989).

(xvii) 52.222-55, Minimum Wages for Contractor Workers Under Executive Order 14026

(Jan 2022).

(xviii) 52.222-62, Paid Sick Leave Under Executive Order 13706 (Jan 2022) (E.O.

13706).

(xix) (A) 52.224-3, Privacy Training (Jan 2017) (5 U.S.C. 552a).

(B) Alternate I (Jan 2017) of 52.224-3.

(xx) 52.225-26, Contractors Performing Private Security Functions Outside the United

States (Oct 2016) (Section 862, as amended, of the National Defense Authorization Act for Fiscal Year 2008; 10 U.S.C. 2302 Note).

(xxi) 52.226-6, Promoting Excess Food Donation to Nonprofit Organizations (Jun 2020) (42 U.S.C. 1792). Flow down required in accordance with paragraph (e) of FAR clause 52.226-6.

(xxii) 52.247-64, Preference for Privately Owned U.S.-Flag Commercial Vessels (Nov 2021) (46 U.S.C. 55305 and 10 U.S.C.2631). Flow down required in accordance with paragraph

(d) of FAR clause 52.247-64.

(2) While not required, the Contractor may include in its subcontracts for commercial products and commercial services a minimal number of additional clauses necessary to satisfy its contractual obligations.

(xiiii) Additional Requirements/Terms and Conditions:

Clauses:

52.204-13 System for Award Management Maintenance (OCT 2018)

52.204-18 Commercial and Government Entity Code Maintenance (AUG 2020)

52.252-1 Solicitation Provisions Incorporated by Reference (FEB 1998)

This solicitation incorporates one or more solicitation provisions by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. The offeror is cautioned that the listed provisions may include blocks that must be completed by the offeror and submitted with its quotation or offer. In lieu of submitting the full text of those provisions, the offeror

Solicitation 1240LR24Q0033 Page 12 of 19 may identify the provision by paragraph identifier and provide the appropriate information with its quotation or offer. Also, the full text of a solicitation provision may be accessed electronically at this/these address(es):

Federal Acquisition Regulation (FAR) Clauses:

https://www.acquisition.gov/browse/index/far (FAR clauses begin with 52) Department of Agriculture Acquisition Regulation (AGAR) Clauses:

https://www.acquisition.gov/agar (AGAR clauses begin with 452) Deviations to provisions may be viewed at:

https://www.dm.usda.gov/procurement/policy/FARClassDeviations.htm

52.212-3 Offeror Representations and Certifications – Commercial Products and Commercial Services (NOV 2021) (DEVIATION JUL 2020) (Provision)

[If Offeror Representations and Certifications are not complete in SAM the offeror shall submit a completed copy of the provision at 52.212-3, Offeror Representations and Certifications-Commercial Products and Commercial Services, with your offer. The full provision is available from http://www.acquisition.gov/far/.

If Offeror Representations and Certifications are complete in SAM, the offeror shall complete the following:]

(b)(1) Annual Representations and Certifications. Any changes provided by the Offeror in paragraph (b)(2) of this provision do not automatically change the representations and certifications in SAM.

(2) The offeror has completed the annual representations and certifications electronically in SAM accessed through http://www.sam.gov. After reviewing SAM information, the Offeror verifies by submission of this offer that the representations and certifications currently posted electronically at FAR 52.212-3, Offeror Representations and Certifications-Commercial Products and Commercial Services, have been entered or updated in the last 12 months, are current, accurate, complete, and applicable to this solicitation (including the business size standard(s) applicable to the NAICS code(s) referenced for this solicitation), at the time this offer is submitted and are incorporated in this offer by reference (see FAR 4.1201), except for paragraphs ______________.

[Offeror to identify the applicable paragraphs at (c) through (v) of this provision that the offeror has completed for the purposes of this solicitation only, if any. Write “None” if there are no changes needed to your online reps and certs.

These amended representation(s) and/or certification(s) are also incorporated in this offer and are current, accurate, and complete as of the date of this offer.

Any changes provided by the offeror are applicable to this solicitation only, and do not result in an update to the representations and certifications posted electronically on

SAM.]

https://www.acquisition.gov/browse/index/far https://www.acquisition.gov/agar https://www.dm.usda.gov/procurement/policy/FARClassDeviations.htm http://www.acquisition.gov/far/ http://www.sam.gov/ https://www.acquisition.gov/content/part-52-solicitation-provisions-and-contract-clauses#i1060550 https://www.acquisition.gov/content/part-4-administrative-and-information-matters#i1121876

Solicitation 1240LR24Q0033 Page 13 of 19

(xv) Date, Time, and Place Offers are due

Quotes are due by: 04/05/2024 by 14:00 MT

(xvi) Government Point of Contact

Andrea Marks-Cash, andrea.mark-cash@usda.gov

ATTACHEMENTS

Drawings Greenhorn TB Material Suppy mailto:andrea.mark-cash@usda.gov

PROJECT LOCATION

VICINITY MAP

SHEET OF

United States Department of Agriculture

Forest Service

INDEX OF SHEETS

SHEET SHEET TITLE DATE

01 COVER SHEET 12/15/2023

RECOMMENDED BY:

STAFF ENGINEER

FOREST ENGINEER

DATE

(R04) INTERMOUNTAIN REGION

SAWTOOTH NATIONAL FOREST

BLAINE COUNTY

IDAHO

GREENHORN GULCH TRAIL BRIDGE

MATERIAL SUPPLY PROJECT

Braidy K. Richins, PE 12/15/2023

DATE

BRIDGE PLAN_ELEV_AND SECTION

KETCHUM RANGER

STATION

GREENHORN GULCH

TRAILHEAD PARKING LOT

SILL_BEARING_CURB DETAILS

FOUNDATION_ANCHOR DETAILS

DIRECTIONS: THE PROJECT STAGING AREA WILL BE THE GREENHORN GULCH

TRAILHEAD PARKING LOT. FROM THE KETCHUM RANGER STATION HEAD

SOUTHWEST ALONG SUN VALLEY ROAD FOR 0.3 MILES; TURN LEFT ONTO SH-75

AND TRAVEL 5.7 MILES; TURN RIGHT ONTO GREENHORN GULCH ROAD AND

CONTINUE FOR 3.6 MILES TO DESTINATION.

COORDINATE TIMBER MATERIAL DELIVERY WITH BRAIDY RICHINS, ASSISTANT

FOREST ENGINEER, @ (208) 731-0176.

GENERAL NOTES & SCHEDULE OF

MATERIALS

DESIGN CRITERIA & BRIDGE

ISOMETRIC

Shawn Robnett, PE 12/15/2023

12/15/2023

12/15/2023

12/15/2023

12/15/2023

12/15/2023

ATTACHMENT 1

963 - GLULAM TRAIL BRIDGE

GENERAL NOTES & SCH. MATERIALS

KETCHUM RANGER DISTRICT

SAWTOOTH NATIONAL FOREST

GREENHORN GULCH TB MATERIAL SUPPLY

STANDARD TRAIL PLAN

12/15/2023

OF

2 6

NOT TO SCALEGSB

SCHEDULE OF MATERIALS

DESCRIPTION QUANTITY

SCHEDULE OF MATERIALS NOTES

GENERAL NOTES

AutoCAD SHX Text

FOREST SERVICE

AutoCAD SHX Text

U.S. DEPARTMENT OF AGRICULTURE

AutoCAD SHX Text

DRAWING NAME

AutoCAD SHX Text D

AutoCAD SHX Text E

AutoCAD SHX Text P

AutoCAD SHX Text A

AutoCAD SHX Text R

AutoCAD SHX Text T

AutoCAD SHX Text M

AutoCAD SHX Text E

AutoCAD SHX Text N

AutoCAD SHX Text O

AutoCAD SHX Text F

AutoCAD SHX Text T

AutoCAD SHX Text A

AutoCAD SHX Text G

AutoCAD SHX Text R

AutoCAD SHX Text I

AutoCAD SHX Text C

AutoCAD SHX Text U

AutoCAD SHX Text L

AutoCAD SHX Text T

AutoCAD SHX Text U

AutoCAD SHX Text R

AutoCAD SHX Text E

AutoCAD SHX Text

PROJECT NAME & LOCATION

AutoCAD SHX Text

SECTION

AutoCAD SHX Text

REVISION DATE

AutoCAD SHX Text

SHEET

AutoCAD SHX Text

DRAWING NO.

AutoCAD SHX Text

TYPICAL ID

AutoCAD SHX Text (Pieces)

AutoCAD SHX Text

WOOD MEMBERS

AutoCAD SHX Text

HARDWARE

AutoCAD SHX Text 12" x 12" x 7'-0" TIMBER SILL 5 1/8" x 21" x 41'-0" GLULAM STRINGER 5 1/8" x 18" x 15-5/16" GLULAM STRINGER DIAPHRAGM 3" x 8" x 5'-0" DECK PLANK 3" x 9.75" x 10'-0" BACKING PLANK 3" x 12" x 10'-0" BACKING PLANK 3" x 6" x 2'-9.75" BACKING PLANK STIFFENER 6" x 6" x 21'-6" CURB RAIL 3" x 6" x 2'-0" CURB BLOCK 2" x 6" x 14'-0" CONTINUOUS CURB PLATE 2" x 6" x 13'-6" CONTINUOUS CURB PLATE

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text 34" x 2'-6" THREADED ROD, TWO NUTS & ONE MI WASHER (SILL TO FOUNDATION)34" x 4'-4" THREADED ROD, TWO NUTS, AND TWO MI WASHERS (DIAPHRAGM TO STRINGER)14" x 1-1/4" x 7'-0" METAL STRAP (SILL TO FOUNDATION) BEARING SHOE ASSEMBLY WITH ELASTOMERIC BEARING PAD (STRINGER TO SILL) 34" x 0'-9" LAG SCREW WITH FLAT WASHER (BEARING SHOE TO SILL)34" x 0'-8" HEX BOLT, NUT & TWO FLAT WASHERS (BEARING SHOE TO STRINGER)12" x 0'-8" HEX BOLT, NUT & TWO MI WASHERS (BACKING STIFFENER TO BACKING)58" x 1'-3" TIMBER BOLT, NUT & ONE MI WASHER (CURB CONNECTION)60d (6" RING SHANK) NAILS 16d (3 1/2" RING SHANK) NAILS

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

1. ALL QUANTITIES LISTED REPRESENT THE ESTIMATED NUMBER OF RESPECTIVE WOOD/HARDWARE AND ALL QUANTITIES LISTED REPRESENT THE ESTIMATED NUMBER OF RESPECTIVE WOOD/HARDWARE AND IS FOR INFORMATIONAL PURPOSES ONLY. SUPPLIER SHALL PROVIDE SHOP DRAWINGS DEPICTING ALL REQUIRED MATERIALS FOR ENGINEER'S REVIEW/APPROVAL PRIOR TO MATERIAL FABRICATION AND HARDWARE SUPPLY. 2. SUPPLIER SHALL PROVIDE ALL REQUIRED MATERIALS (WOOD, BOLTS, BEARINGS, HARDWARE, GABION SUPPLIER SHALL PROVIDE ALL REQUIRED MATERIALS (WOOD, BOLTS, BEARINGS, HARDWARE, GABION BASKETS, ETC.) NECESSARY TO RENDER THE BRIDGE SYSTEM COMPLETE. 3. EXTRA NAILS ARE BASED ON 10% OF ACTUAL NUMBER. USE THIS NUMBER FOR SUPPLY OR THE EXTRA NAILS ARE BASED ON 10% OF ACTUAL NUMBER. USE THIS NUMBER FOR SUPPLY OR THE NEAREST AMOUNT IN A CARTON, WHICHEVER IS MOST ECONOMICAL TO THE GOVERNMENT. 4. SUPPLIER SHALL FURNISH A ONE GALLON OF COPPER NAPTHENATE (2% SOLUTION) FOR FIELD SUPPLIER SHALL FURNISH A ONE GALLON OF COPPER NAPTHENATE (2% SOLUTION) FOR FIELD TREATMENT OF WOOD.

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text FABRICATION: SUBMIT SHOP DRAWINGS FOR ALL BRIDGE COMPONENTS. SHOW DIMENSIONS AND FABRICATION DETAILS FOR SUBMIT SHOP DRAWINGS FOR ALL BRIDGE COMPONENTS. SHOW DIMENSIONS AND FABRICATION DETAILS FOR ALL CUT OR BORED TIMBER. ALL LUMBER, WITH EXCEPTION OF CONTINUOUS CURB PLATES AND DECK PLANK ENDS FOR ALL LUMBER, WITH EXCEPTION OF CONTINUOUS CURB PLATES AND DECK PLANK ENDS FOR CURB BOLT CONNECTION, SHALL BE PRE-DRILLED PRIOR TO PRESERVATIVE TREATMENT APPLICATION TO ACCOMMODATE ALL TIE RODS, BOLTS, LAG SCREWS, AND NAILS.

AutoCAD SHX Text SPECIFICATIONS: MATERIALS AND CONSTRUCTION OF THIS STRUCTURE SHALL BE IN ACCORDANCE WITH THE STANDARD MATERIALS AND CONSTRUCTION OF THIS STRUCTURE SHALL BE IN ACCORDANCE WITH THE STANDARD SPECIFICATION FOR CONSTRUCTION OF ROADS AND BRIDGES ON FEDERAL HIGHWAY PROJECTS (FP-14).

AutoCAD SHX Text TIMBER & LUMBER: SOLID SAWN TIMBER MEMBERS SHALL CONFORM TO THE REQUIREMENTS OF THE GRADING RULES SOLID SAWN TIMBER MEMBERS SHALL CONFORM TO THE REQUIREMENTS OF THE GRADING RULES AGENCY FOR THE SPECIES, TYPE, AND GRADE SPECIFIED BELOW. GLULAM MEMBERS SHALL CONFORM TO THE AMERICAN NATIONAL STANDARD, STANDARD SPECIFICATIONS FOR STRUCTURAL GLUED LAMINATED TIMBER OF SOFTWOOD SPECIES (ANSI 117) FOR THE COMBINATION, SPECIES, USE, AND APPEARANCE SPECIFIED BELOW. GLULAM STRINGERS, GLULAM DIAPHRAGMS - COMBINATION SYMBOL 24F-V4, SPECIES - DF/DF DRY CONDITION USE AND INDUSTRIAL APPEARANCE COMBINATION SYMBOL 24F-V4, SPECIES - DF/DF DRY CONDITION USE AND INDUSTRIAL APPEARANCE CURB MEMBERS, DECK PLANKS, SILLS, BACKING PLANKS/STIFFENERS - COASTAL REGION DOUGLAS FIR - LARCH ROUGH SAWN NO.1 GRADE, GRADING RULES AGENCY - WWPA, WCLIB COASTAL REGION DOUGLAS FIR - LARCH ROUGH SAWN NO.1 GRADE, GRADING RULES AGENCY - WWPA, WCLIB RUNNING PLANKS - COASTAL REGION DOUGLAS FIR - LARCH ROUGH SAWN NO.2 GRADE, GRADING RULES AGENCY - WWPA, WCLIB COASTAL REGION DOUGLAS FIR - LARCH ROUGH SAWN NO.2 GRADE, GRADING RULES AGENCY - WWPA, WCLIB HANDRAIL SYSTEM (POSTS, RAILS, VERTICAL END SUPPORT) UNTREATED - REDWOOD, S4S, NO.2 GRADE GRADING RULES AGENCY - RIS - WESTERN RED CEDAR, S4S, SELECT STRUCTURAL GRADE GRADING RULES AGENCY - WWPA, WCLIB TREATED - HEM-FIR/DOUGLAS FIR, S4S, NO.1 GRADE GRADING RULES AGENCY - WWPA, WCLIB

AutoCAD SHX Text LAG SCREW BORING NOTE: PRE-BORE LAG SCREW HOLES USING TWO DIAMETERS, ONE FOR THE SHANK AND ONE FOR PRE-BORE LAG SCREW HOLES USING TWO DIAMETERS, ONE FOR THE SHANK AND ONE FOR THE THREADS. THE LEAD HOLE FOR THE SHANK IS TO BE 1/16-INCH LARGER THAN THE SHANK DIAMETER AND IS TO BE BORED TO THE DEPTH OF PENETRATION OF THE SHANK. THE LEAD HOLE FOR THE THREADED PORTION IS TO BE 70 PERCENT OF THE BOLT DIAMETER AS SHOWN ON THE PLANS AND IS TO BE BORED AT LEAST TO THE LENGTH OF THE THREADS.

AutoCAD SHX Text TREATMENT: SEE PROJECT CRITERIA FOR MEMBERS IDENTIFIED TO BE TREATED AND FOR TREATMENT TYPE. PRESERVATIVE SEE PROJECT CRITERIA FOR MEMBERS IDENTIFIED TO BE TREATED AND FOR TREATMENT TYPE. PRESERVATIVE TREATMENT SHALL BE IN ACCORDANCE WITH THE CURRENT AMERICAN WOOD PROTECTION ASSOCIATION (AWPA) SPECIFICATIONS USING THE TREATMENT MATERIALS LISTED BELOW. TREATMENT WILL COMPLY WITH THE REQUIREMENTS OF THE CURRENT EDITION OF WESTERN WOOD PRESERVERS INSTITUTE (WWPI) "BEST MANAGEMENT PRACTICES FOR THE USE OF TREATED WOOD IN AQUATIC ENVIRONMENTS". USE ONE OF THE TREATMENT TYPES NOTED BELOW: GLULAM STRINGER, GLULAM DIAPHRAGM, DECK PLANKS - AWPA UC4C - AWPA UC4C AWPA UC4C - COPPER NAPHTHENATE IN HYDROCARBON SOLVENT A COPPER NAPHTHENATE IN HYDROCARBON SOLVENT A - ALTERNATE OIL-BASED PRODUCTS APPROVED BY COR ALTERNATE OIL-BASED PRODUCTS APPROVED BY COR DECK PLANKS, RUNNING PLANKS, CURB MEMBERS, HANDRAIL SYSTEM - AWPA UC4A - AWPA UC4A AWPA UC4A - COPPER NAPHTHENATE IN HYDROCARBON SOLVENT A COPPER NAPHTHENATE IN HYDROCARBON SOLVENT A - ALTERNATE OIL-BASED PRODUCTS APPROVED BY COR ALTERNATE OIL-BASED PRODUCTS APPROVED BY COR - WATERBORNE TREATMENT SUCH AS ALKALINE COPPER QUAT (FORMULATION A, B, C, OR D), COPPER AZOLES WATERBORNE TREATMENT SUCH AS ALKALINE COPPER QUAT (FORMULATION A, B, C, OR D), COPPER AZOLES (FORMULATION B OR C), MICRONIZED COPPER AZOLES (FORMULATION C), OR EQUAL, AS APPROVED BY THE COR SILLS, BACKING PLANKS, CRIBS, TIMBER WALLS - AWPA UC4C - AWPA UC4C AWPA UC4C - COPPER NAPHTHENATE IN HYDROCARBON SOLVENT A COPPER NAPHTHENATE IN HYDROCARBON SOLVENT A - CCA CCA - ALTERNATE OIL-BASED PRODUCTS APPROVED BY COR ALTERNATE OIL-BASED PRODUCTS APPROVED BY COR HARDWARE - HARDWARE THROUGH OR INTO OIL-BASED TREATMENT SHALL BE HOT-DIPPED GALVANIZED PER ASTM A123. HARDWARE THROUGH OR INTO OIL-BASED TREATMENT SHALL BE HOT-DIPPED GALVANIZED PER ASTM A123. - HARDWARE THROUGH OR INTO WATERBORNE TREATMENT SHALL BE STAINLESS OR HOT-DIPPED GALVANIZED PER HARDWARE THROUGH OR INTO WATERBORNE TREATMENT SHALL BE STAINLESS OR HOT-DIPPED GALVANIZED PER ASTM F593 OR ASTM A123. WOOD SCREWS AND CONSTRUCTION LAGS SHALL MEET ICC AC 257. ADDITIONAL NOTES - MATERIALS IN CONTACT WITH MARINE OR BRACKISH WATER SHALL COMPLY WITH CHAPTER 5 OF AWPA BOOK OF MATERIALS IN CONTACT WITH MARINE OR BRACKISH WATER SHALL COMPLY WITH CHAPTER 5 OF AWPA BOOK OF STANDARDS. - TREATMENT LEVELS SHOWN ABOVE ARE MINIMUM. INCREASED LEVELS ARE ALLOWED, IF APPROVED BY COR. TREATMENT LEVELS SHOWN ABOVE ARE MINIMUM. INCREASED LEVELS ARE ALLOWED, IF APPROVED BY COR. - USE WATERBORNE TREATMENT (AWPA UC4A) FOR RAILING POSTS AND RAIL BOARDS IN AREAS OF HIGH USE WATERBORNE TREATMENT (AWPA UC4A) FOR RAILING POSTS AND RAIL BOARDS IN AREAS OF HIGH PEDESTRIAN USE OR TO REDUCE ODOR. - INDUSTRIAL ABSORBENT (E.G. ECOSORB OR APPROVED EQUAL) MAY BE APPLIED TO OIL-BASED TREATED TIMBER INDUSTRIAL ABSORBENT (E.G. ECOSORB OR APPROVED EQUAL) MAY BE APPLIED TO OIL-BASED TREATED TIMBER TO REDUCE ODOR. - FIELD TREAT ALL CUTS, BORES, HOLES AND OTHER ALTERATIONS MADE AFTER INITIAL PRESSURE TREATMENT FIELD TREAT ALL CUTS, BORES, HOLES AND OTHER ALTERATIONS MADE AFTER INITIAL PRESSURE TREATMENT PROCESS, WITH 3 BRUSH COATS OF COPPER NAPHTHENATE OR ACCORDING TO AWPA M4. - SEE FPL GENERAL TECHNICAL REPORT NO. 275 FOR AVAILABILITY AND USES OF TREATED TIMBER ALTERNATIVES.SEE FPL GENERAL TECHNICAL REPORT NO. 275 FOR AVAILABILITY AND USES OF TREATED TIMBER ALTERNATIVES.

AutoCAD SHX Text

DESIGN CRITERIA & BRIDGE ISOMETRIC

KETCHUM RANGER DISTRICT

SAWTOOTH NATIONAL FOREST

GREENHORN GULCH TB MATERIAL SUPPLY

STANDARD TRAIL PLAN

12/15/2023

OF

3 6

NOT TO SCALEGSB

AutoCAD SHX Text

FOREST SERVICE

AutoCAD SHX Text

U.S. DEPARTMENT OF AGRICULTURE

AutoCAD SHX Text

DRAWING NAME

AutoCAD SHX Text D

AutoCAD SHX Text E

AutoCAD SHX Text P

AutoCAD SHX Text A

AutoCAD SHX Text R

AutoCAD SHX Text T

AutoCAD SHX Text M

AutoCAD SHX Text E

AutoCAD SHX Text N

AutoCAD SHX Text O

AutoCAD SHX Text F

AutoCAD SHX Text T

AutoCAD SHX Text A

AutoCAD SHX Text G

AutoCAD SHX Text R

AutoCAD SHX Text I

AutoCAD SHX Text C

AutoCAD SHX Text U

AutoCAD SHX Text L

AutoCAD SHX Text T

AutoCAD SHX Text U

AutoCAD SHX Text R

AutoCAD SHX Text E

AutoCAD SHX Text

PROJECT NAME & LOCATION

AutoCAD SHX Text

SECTION

AutoCAD SHX Text

REVISION DATE

AutoCAD SHX Text

SHEET

AutoCAD SHX Text

DRAWING NO.

AutoCAD SHX Text

%%UGLULAM STRINGER TRAIL BRIDGE WITH CURB RAIL SYSTEM - ISOMETRIC

AutoCAD SHX Text

BACKWALL

AutoCAD SHX Text

BEARING SHOE NOT ALL SHOWN FOR CLARITY

AutoCAD SHX Text

DECK PLANKS

AutoCAD SHX Text

GLULAM STRINGER NOT ALL SHOWN FOR CLARITY

AutoCAD SHX Text

APPROACH FILL

AutoCAD SHX Text

APPROACH NOT SHOWN FOR CLARITY

AutoCAD SHX Text

TIMBER CURB RAIL SYSTEM CONTINUOUS PLATE NOT SHOWN FOR CLARITY

AutoCAD SHX Text

TYPICAL ID

AutoCAD SHX Text

SILL

AutoCAD SHX Text

THIS BRIDGE SHALL BE CONSTRUCTED IN ACCORDANCE WITH THE FOLLOWING CRITERIA:

AutoCAD SHX Text

OPTIONS TO BE SELECTED ARE BRACKETED [ ].

AutoCAD SHX Text

PEDESTRIAN LIVE LOAD

AutoCAD SHX Text

GROUND SNOW LOAD

AutoCAD SHX Text

SPAN LENGTH

AutoCAD SHX Text

CLEAR WIDTH

AutoCAD SHX Text %%uSTRINGERS:

AutoCAD SHX Text

NUMBER REQUIRED

AutoCAD SHX Text

MATERIAL SIZE

AutoCAD SHX Text

RUNNING PLANKS

AutoCAD SHX Text

CURBS / HANDRAIL

AutoCAD SHX Text

STEEL HARDWARE

AutoCAD SHX Text

= %%U 90 %%U PSF

AutoCAD SHX Text

= %%U 120 %%U PSF (WITH NO MODIFICATION FACTORS)

AutoCAD SHX Text

= %%U 40'-0" %%U ( BEARING-TO- BEARING)

AutoCAD SHX Text

= %%U 4'-0" %%U (SEE TYPICAL SECTION)

AutoCAD SHX Text = %%U 3

AutoCAD SHX Text = %%U 5-1/8" %%U WIDTH x %%U 21" %%U DEPTH

AutoCAD SHX Text

= [NO]

AutoCAD SHX Text

= [CURBS]

AutoCAD SHX Text

= [GALVANIZED]

AutoCAD SHX Text L

AutoCAD SHX Text C

AutoCAD SHX Text L

AutoCAD SHX Text C

AutoCAD SHX Text

PROJECT DESIGN CRITERIA:

AutoCAD SHX Text

BRIDGE TOTAL LENGTH

AutoCAD SHX Text

= %%U 41'-0" %%U (END-TO-END)

AutoCAD SHX Text

%%USTRINGER DIAPHRAGMS:

AutoCAD SHX Text

NUMBER REQUIRED

AutoCAD SHX Text

MATERIAL SIZE

AutoCAD SHX Text = %%U 8

AutoCAD SHX Text = %%U 5-1/8" %%U WIDTH x %%U 18" %%U DEPTH

AutoCAD SHX Text

NOTE: : TIMBER DIAPHRAGMS NOT SHOWN FOR CLARITY

NOTES: 1. BRIDGE ISOMETRIC VIEW IS NOT TO SCALE. IT'S SIMPLY MEANT TO CONVEY INTENDED LOOK OF NEW BRIDGE. SEE PLANS FOR ACTUAL MEMBER SIZES, QUANTITY, SPACING, AND LAYOUT. 2. ANCHORING/FASTENING FOR ALL MEMBERS NOT SHOWN FOR CLARITY. SEE PLANS FOR REQUIREMENTS.

BRIDGE PLAN_ELEV_SECTION

KETCHUM RANGER DISTRICT

SAWTOOTH NATIONAL FOREST

GREENHORN GULCH TB MATERIAL SUPPLY

STANDARD TRAIL PLAN

12/15/2023

OF

4 6

NOT TO SCALEGSB

A

A

SECTION A--A

AutoCAD SHX Text

FOREST SERVICE

AutoCAD SHX Text

U.S. DEPARTMENT OF AGRICULTURE

AutoCAD SHX Text

DRAWING NAME

AutoCAD SHX Text D

AutoCAD SHX Text E

AutoCAD SHX Text P

AutoCAD SHX Text A

AutoCAD SHX Text R

AutoCAD SHX Text T

AutoCAD SHX Text M

AutoCAD SHX Text E

AutoCAD SHX Text N

AutoCAD SHX Text O

AutoCAD SHX Text F

AutoCAD SHX Text T

AutoCAD SHX Text A

AutoCAD SHX Text G

AutoCAD SHX Text R

AutoCAD SHX Text I

AutoCAD SHX Text C

AutoCAD SHX Text U

AutoCAD SHX Text L

AutoCAD SHX Text T

AutoCAD SHX Text U

AutoCAD SHX Text R

AutoCAD SHX Text E

AutoCAD SHX Text

PROJECT NAME & LOCATION

AutoCAD SHX Text

SECTION

AutoCAD SHX Text

REVISION DATE

AutoCAD SHX Text

SHEET

AutoCAD SHX Text

DRAWING NO.

AutoCAD SHX Text

%%UNOTES:

AutoCAD SHX Text

1. FABRICATE GLULAM STRINGERS WITH CAMBER BASED ON A 900-FOOT RADIUS. FABRICATE GLULAM STRINGERS WITH CAMBER BASED ON A 900-FOOT RADIUS. 2. FASTEN DECK PLANKS TO STRINGERS WITH TWO ROWS 60d (6-INCH) RING SHANK NAILS PER PLANK AT EACH STRINGER. ALTERNATE CENTERS. FASTEN DECK PLANKS TO STRINGERS WITH TWO ROWS 60d (6-INCH) RING SHANK NAILS PER PLANK AT EACH STRINGER. ALTERNATE CENTERS. 3. ALL LUMBER, WITH EXCEPTION OF CONTINUOUS CURB PLATES AND DECK PLANK ENDS FOR CURB BOLT CONNECTION, SHALL BE PRE-DRILLED ALL LUMBER, WITH EXCEPTION OF CONTINUOUS CURB PLATES AND DECK PLANK ENDS FOR CURB BOLT CONNECTION, SHALL BE PRE-DRILLED PRIOR TO PRESERVATIVE TREATMENT APPLICATION TO ACCOMMODATE ALL TIE RODS, BOLTS, LAG SCREWS, AND NAILS. WHEN FIELD DRILLING WHEN FIELD DRILLING DECK PLANK ENDS, USE CARE TO PREVENT WOOD SHAVINGS AND OTHER DEBRIS FROM ENTERING THE STREAM. . 4. SEE SCHEDULE OF MATERIALS FOR ACTUAL NUMBER OF RESPECTIVE TIMBER MATERIAL AND HARDWARE.SEE SCHEDULE OF MATERIALS FOR ACTUAL NUMBER OF RESPECTIVE TIMBER MATERIAL AND HARDWARE.

AutoCAD SHX Text

TYPICAL ID

AutoCAD SHX Text

%%UPLAN

AutoCAD SHX Text

%%UBRIDGE SECTION WITH CURB RAILING

AutoCAD SHX Text

STRUCTURE

AutoCAD SHX Text 3" x 8" DECK PLANKS

AutoCAD SHX Text 5-1/8"x18"x15-5/16" GLULAM DIAPHRAGM. CONNECT TO STRINGERS WITH TWO " CONTINUOUS TIE RODS 34" CONTINUOUS TIE RODS(NOT SHOWN FOR CLARITY). RIGHT-HAND THREADS REQUIRED ON BOTH ENDS. VERIFY DIAPHRAGM LENGTH AND REDUCE AS NECESSARY TO ACCOMMODATE FIELD INSTALLATION.

AutoCAD SHX Text

STRUCTURE

AutoCAD SHX Text

EQUAL SPACED

6" x 6" CURB RAIL

AutoCAD SHX Text 3" x 6" x 2'-0" CURB BLOCKS SPACED @ 4'-9" CENTERS

AutoCAD SHX Text 2" x 6" CONTINUOUS PLATE

AutoCAD SHX Text

ABUTMENT C

AutoCAD SHX Text L

AutoCAD SHX Text

ABUTMENT C

AutoCAD SHX Text BACKING PLANKS (TYP BOTH ENDS) 2 - 3"x12" 1 - 3"x9.75"

AutoCAD SHX Text

%%UELEVATION

AutoCAD SHX Text

GRADE SHOWN = 0.0%

AutoCAD SHX Text

6" RING SHANK NAILS

AutoCAD SHX Text

3" CHAMFER ON CURB ENDS (TYPICAL OF 4)

AutoCAD SHX Text L

AutoCAD SHX Text 3" x 6" BACKING PLANK STIFFENER. ATTACH WITH TWO 1/2" x 8" BOLTSEACH HAVING ONE NUT & TWO MALLEABLE IRON WASHERS PER INDIVIDUAL BACKING PLANK SPACED DIAGONALLY FROM EACH OTHER.

AutoCAD SHX Text 5/8" x 1'-3" TIMBERBOLT, NUT, AND MALLEABLE IRON WASHER. FIELD DRILL 11/16" DIAMETER HOLE IN DECK PLANKS AND 2" x 6" CONTINUOUS PLATE. TREAT HOLES PER GENERAL NOTES.

AutoCAD SHX Text

DIAPHRAGM MEMBERS NOT SHOWN FOR CLARITY

AutoCAD SHX Text

CONTINUOUS CURB PLATE NOT SHOWN FOR CLARITY

AutoCAD SHX Text

EQUAL SPACED

AutoCAD SHX Text

STRINGER

AutoCAD SHX Text 3/4" TIE ROD WITHMALLEABLE IRON WASHER AND HEAVY HEX NUT, BOTH SIDES (TYPICAL TWO PER DIAPHRAGM LOCATION). THREAD 4" AT END OF ROD

AutoCAD SHX Text

5 1/8" GLULAM DIAPHRAGM WIDTH (TYP)

AutoCAD SHX Text

1" SQUARE PLY ROUTE AT TOP & BOTTOM

AutoCAD SHX Text

%%UBRIDGE GLULAM DIAPHRAGM ELEVATION & SECTION

AutoCAD SHX Text

STRINGER

AutoCAD SHX Text

DIAPHRAGM

AutoCAD SHX Text 12"x12"x7'-0" TIMBER SILL

AutoCAD SHX Text 5-1/8" x 21" GLULAM TIMBER STRINGER (3 TOTAL)

AutoCAD SHX Text

ABUTMENT

AutoCAD SHX Text

ABUTMENT

AutoCAD SHX Text

CURB RAILING. SEE DETAILS, NEXT SHEET FOR BLOCKING AND ANCHORING REQUIREMENTS

AutoCAD SHX Text

CURB BLOCKING (TYPICAL)

AutoCAD SHX Text 5-1/8" x 18" GLULAM DIAPHRAGM

STRINGER

SILL_BEARING_CURB DETAILS

KETCHUM RANGER DISTRICT

SAWTOOTH NATIONAL FOREST

GREENHORN GULCH TB MATERIAL SUPPLY

STANDARD TRAIL PLAN

12/15/2023

OF

5 6

NOT TO SCALEGSB

BACKING PLANK NAILING PATTERN

AutoCAD SHX Text

FOREST SERVICE

AutoCAD SHX Text

U.S. DEPARTMENT OF AGRICULTURE

AutoCAD SHX Text

DRAWING NAME

AutoCAD SHX Text D

AutoCAD SHX Text E

AutoCAD SHX Text P

AutoCAD SHX Text A

AutoCAD SHX Text R

AutoCAD SHX Text T

AutoCAD SHX Text M

AutoCAD SHX Text E

AutoCAD SHX Text N

AutoCAD SHX Text O

AutoCAD SHX Text F

AutoCAD SHX Text T

AutoCAD SHX Text A

AutoCAD SHX Text G

AutoCAD SHX Text R

AutoCAD SHX Text I

AutoCAD SHX Text C

AutoCAD SHX Text U

AutoCAD SHX Text L

AutoCAD SHX Text T

AutoCAD SHX Text U

AutoCAD SHX Text R

AutoCAD SHX Text E

AutoCAD SHX Text

PROJECT NAME & LOCATION

AutoCAD SHX Text

SECTION

AutoCAD SHX Text

REVISION DATE

AutoCAD SHX Text

SHEET

AutoCAD SHX Text

DRAWING NO.

AutoCAD SHX Text

%%UBEARING SHOE DETAIL

AutoCAD SHX Text

%%UPLAN

AutoCAD SHX Text

%%UEND VIEW

AutoCAD SHX Text

%%USIDE VIEW

AutoCAD SHX Text

MATERIAL = 1/2" STEEL PLATE A36

AutoCAD SHX Text

%%UTIMBER SILL

AutoCAD SHX Text

%%UCONNECTION DETAIL

AutoCAD SHX Text

ABUTMENT

AutoCAD SHX Text

AutoCAD SHX Text

1/2" X WIDTH VARIES X 6" ELASTOMERIC PAD (TYP) (50 DUROMETER)

AutoCAD SHX Text FASTEN DECK PLANK TO TOP OF BACKING PLANK USING 6" RINGSHANK NAILS ON 12" CENTERS

AutoCAD SHX Text FASTEN EACH BACKING PLANK TO EACH STRINGER/SILL USING THREE 6" RING SHANK NAILS PER STRINGER LOCATION. SEE BACKING PLANK NAILING PATTERN, THIS SHEET, FOR CONNECTION TO SILL MEMBER.

AutoCAD SHX Text

3" DIMENSIONAL BACKING PLANKS

AutoCAD SHX Text

FOUNDATION

AutoCAD SHX Text

3/4" BOLT & NUT WITH TWOFLAT WASHERS

AutoCAD SHX Text 12"x12" SOLID SAWN TIMBER SILL

AutoCAD SHX Text 3/4" x 9" LAG SCREW &FLAT WASHER (TWO PER BEARING SHOE)

AutoCAD SHX Text

GLULAM STRINGER PER PLANS

AutoCAD SHX Text

TOP OF DECK PLANKS

AutoCAD SHX Text

BEARING SHOE

AutoCAD SHX Text

FULL PENETRATION

AutoCAD SHX Text

TYPICAL ID

AutoCAD SHX Text

%%USOLID SAWN CURB CONNECTION DETAILS

AutoCAD SHX Text

%%UELEVATION-

AutoCAD SHX Text

%%UELEVATION-

AutoCAD SHX Text %%uTYPICAL CONNECTION

AutoCAD SHX Text %%uCONNECTION AT SPLICE

AutoCAD SHX Text

%%UPLAN-CURB BLOCK

AutoCAD SHX Text

11/16" (TYP)

AutoCAD SHX Text

11/16" (TYP)

AutoCAD SHX Text

5/8" TIMBERBOLTS (TYP)

AutoCAD SHX Text

CURB

AutoCAD SHX Text

CURB

AutoCAD SHX Text

DECK PLANKS

AutoCAD SHX Text

2" X 6" CONTINUOUS CURB PLATE

AutoCAD SHX Text

PLAN-CURB BLOCK AT SPLICE

AutoCAD SHX Text

CURB BLOCK

AutoCAD SHX Text CONTINUOUS CURB PLATE. FASTEN ENDS TO DECK PANELS USING TWO 16d RING SHANK NAILS

AutoCAD SHX Text No Scale

AutoCAD SHX Text 19.5"

AutoCAD SHX Text

13.5" TYPICAL SPACING

AutoCAD SHX Text 19.5"

AutoCAD SHX Text

(ALTERNATE CENTERS AS SHOWN)

AutoCAD SHX Text 2"

AutoCAD SHX Text 2"

AutoCAD SHX Text 2"

AutoCAD SHX Text 2"

AutoCAD SHX Text 5.75"

AutoCAD SHX…