Attachment 2 Specifications.pdf

PDF 695 KB Posted

Attached to
GMUG National Forest - Red Light and Siren (RLS) Upfit
Solicitation number
1240LQ24Q0080
Issued by

About this file

This document is the Attachment 2 Specifications for the federal contract opportunity to upfit three trucks with a red lights and siren (RLS) package for the Forest Service.

The specifications detail the required lighting and siren components for the upfit, including a 48-58" LED light bar, forward and rear-facing warning lights, siren speaker, and a multi-function siren/lighting controller. The vehicles to be upfitted are two 2023 Ford trucks (F250 and F150) and a 2024 Chevrolet K2500HD. The upfit must include all necessary wiring, programming, and manuals. The contract opportunity is Solicitation Number 1240LQ24Q0080, issued by the Department of Agriculture Forest Service, with a requirement for three upfitted trucks. No other details on response dates, pricing, or set-asides are provided in this attachment.

View the file

Other files

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file

Text version

Fire Command Vehicles – Red Lights & Siren Package Upfitting Specifications

Forest Service Equipment Numbers, Type Truck – VIN

• 0212-1925, 2023 Ford F250 Crew Cab - 1FT7W2BA9PED82055

• 0212-3611, 2024 Chevrolet K2500HD Double Cab - 1GC5YLE78RF304435

• 0212-3618, 2023 Ford F150 Super Cab - 1FTEX1EP4PKE66736

Lighting:

• Light Bar

One 48” to 58” wide (vehicle dependent) L.E.D. low profile clear lens lightbar shall be installed on the cab roof, facing forward. Lightbar shall have 12 or more L.E.D. modules as needed per specifications. All Emergency lighting components must have a minimum 5-year factory warranty. The light bar shall be wired to the siren/lightbar switch controller located in the cab.

Forward Zone Light Bar LED’s:

Singled red L.E.D.’s and two center takedown white L.E.D ’s

Side Zones Light Bar L.E.D.’s:

Right and left side center alley single white L.E.D.’s

Two per side Right and left single red L.E.D. ‘s

Rear Zone Light Bar L.E.D. ‘s:

Bi-color, red and amber L.E.D.’s

• Forward Warning Lights:

Two red L.E.D. warning lights, with mounting flanges, shall be provided on the front of the vehicle, forward facing, one per side. The lights shall be programmed in a red triple flash mode. The lights shall be wired to the siren/switch controller located in the cab.

• Front Fenders Side Warning Lights:

Two red L.E.D. warning lights, with mounting flanges, shall be provided on the front corners of the vehicle, side facing, one per side. The lights shall be programmed in a triple flash mode. (Low profile lights, not to exceed 1” protrusion from the mounting location). The lights shall be wired to the siren/switch controller located in the cab.

• Rearward Warning Lights:

Two red L.E.D. warning lights shall be provided at the rear tailgate of the vehicle, rear facing, one per side. The lights shall be programmed in a red triple flash mode. The lights shall be wired to the siren/switch controller located in the cab.

• Rear Bedsides Side Warning Lights:

Two red L.E.D. warning lights, with mounting flanges, shall be provided on the rear corners of the vehicle, side facing, one per side. The lights shall be programmed in a red triple flash mode. (Low profile lights, not to exceed 1” protrusion from the mounting location). The lights shall be wired to the siren/switch controller located in the cab.

Siren Speaker w/PA System and Radio Rebroadcast:

One 100-watt siren speaker shall be provided and mounted in a forward under body location that is not obstructed or vulnerable to being impacted. The speaker shall be wired to the siren/switch controller.

Siren/Lightbar/Lights Switch Controller: 9-switch lights controller (Minimum), siren controller, and P/A system:

Electronic siren, with switching and rear directional controller shall be provided and mounted in the cab center console in a location convenient to both the driver and anyone seated in the passenger seat.

The siren shall have four basic siren tones (manual, wail, yelp and hi-lo), as well as an electronic air horn, radio rebroadcast capability and a public address system.

The siren controller shall be powered from the Auxiliary fuse box with electronic timer installed.

Lightbar and lower zone lights shall be programmed to the specifications of,

• Slide switch/code operation o Position 0 Off o Position 1 Rear facing red strobes on lightbar flashing red – on Rear corner facing red strobes on lightbar flashing red – on Lower zone rear facing and rear side red strobes – on o Position 2 Forward facing red strobes on lightbar flashing red – on Lower zone front facing and front side red strobes - on Rear facing red strobes on lightbar flashing red – on Rear corner facing red strobes on lightbar flashing red – on Lower zone rear facing and rear side strobes – on o Position 3 All red strobes on lightbar multi-pattern flashing red – on All red lower front, rear, and side zone strobes flashing – on Wig-Wag headlights – on

• Wig Wags shall only operate when vehicle is in Gear (Reverse or Drive)

• Push button switches shall be labeled and operate lights as follows from left to right o Left Alley o Takedowns o Right Alley o Traffic advisor operation

Left Center Out Right

Radio Console: Vehicle specific console per the example picture, capable of housing all the identified components below, and an armrest with underside lockable storage area. The radio console must be no wider than 9 inches.

• For one BK model KNG-M150-D radio (Forest Service to supply the mobile radio)

• Emergency lighting and siren controller

• 4 12-volt power points to include USB 2/C charging ports on two of the ports

• 2 cup holders

Remote Speaker:

The Forest Service supplied remote speaker will be mounted on the right side of the center console.

Roof Top Antenna:

The Forest Service supplied antenna will be roof top mounted and tuned to 144mhz to 174mhz.

Manuals/Diagrams:

All owner’s manuals, wiring diagrams and warranty information for installed items shall be provided to the Government in either electronic (thumb drives) and/or hard copy notebook format.

File details come from the government source that posted it. Updated .