SEE ADDENDUMIS CHECKED

CODE 18a. PAYMENT WILL BE MADE BY

CODE

FACILITYCODE

17b. CHECK IF REMITTANCE IS DIFFERENT AND PUT SUCH ADDRESS IN OFFER

OFFEROR

40LP

OGDEN UT 84401-2310

324 25TH ST

USDA-FS CSA INTERMOUNTAIN 4

3187 CODE 16. ADMINISTERED BYCODE

X

X

X

336211

SIZE STANDARD:

100.00 % FOR:SET ASIDE:UNRESTRICTED OR40LP

REQUEST FOR

PROPOSAL

(RFP)

INVITATION

FOR BID (IFB)

10. THIS ACQUISITION ISCODE

REQUEST FOR

QUOTE (RFQ)

14. METHOD OF SOLICITATION

13b. RATING

NORTH AMERICAN INDUSTRY

CLASSIFICATION STANDARD

(NAICS):

SMALL BUSINESS

11/12/2026 1700 MT

11/02/2026

906-280-5282STEVEN DAHLGREN

(No collect calls)

INFORMATION CALL:

FOR SOLICITATION 8. OFFER DUE DATE/LOCAL TIMEb. TELEPHONE NUMBER a. NAME

4. ORDER NUMBER3. AWARD/ 6. SOLICITATION

1240LP27Q0005

5. SOLICITATION NUMBER

SOLICITATION/CONTRACT/ORDER FOR COMMERCIAL ITEMS 1. REQUISITION NUMBER PAGE OF

1 78 1150225OFFEROR TO COMPLETE BLOCKS 12, 17, 23, 24, & 30

TELEPHONE NO.

17a. CONTRACTOR/

WASHINGTON DC 20024

201 14TH ST SW MS-1138

AQM PROC PROPERTY

USDA FOREST SERVICE

15. DELIVER TO

OGDEN UT 84401-2310

324 25TH ST

9. ISSUED BY

7.

2. CONTRACT NO.

EFFECTIVE DATE

1,000

18b. SUBMIT INVOICES TO ADDRESS SHOWN IN BLOCK 18a UNLESS BLOCK BELOW

ISSUE DATE

DELIVERY FOR FREE ON BOARD

(FOB) DESTINATION UNLESS

BLOCK IS MARKED

11.

SEE SCHEDULEX

12. DISCOUNT TERMS THIS CONTRACT IS A RATED

ORDER UNDER THE DEFENSE

PRIORITIES AND ALLOCATIONS

SYSTEM - DPAS (15 CFR 700)

13a.

SERVICE-DISABLED

VETERAN-OWNED

SMALL BUSINESS

(SDVOSB)

HUBZONE SMALL

BUSINESS

8(A)

USDA-FS CSA INTERMOUNTAIN 4

WOMEN-OWNED SMALL

BUSINESS (WOSB)

ECONOMICALLY DISADVANTAGED

WOMEN-OWNED SMALL

BUSINESS (EDWOSB)

24.

AMOUNT

23.

UNIT PRICE

22.

UNIT

21.

QUANTITY

20.

SCHEDULE OF SUPPLIES/SERVICES

19.

ITEM NO.

The purpose of this solicitation is to provide and install Type 6 Fire Engine Prototype Platform Body, on Govt-furnished gas 4X4 cab & chassis per Forest Service specifications.

Delivery: 11/30/2028

0001 Provide and install Type 6 Fire Engine Prototype 1 EA Platform Body, on Govt-furnished gas 4X4 cab & chassis per Forest Service specifications, Type 6 Fire Engine_Model 643P_Apparatus Body Only, dated June 2026. Includes pick up of chassis in San

(Use Reverse and/or Attach Additional Sheets as Necessary)

HEREIN, IS ACCEPTED AS TO ITEMS:

X

XX

DATED

STEVEN M. DAHLGREN

. YOUR OFFER ON SOLICITATION (BLOCK 5),

INCLUDING ANY ADDITIONS OR CHANGES WHICH ARE SET FORTH

COPIES TO ISSUING OFFICE. CONTRACTOR AGREES TO FURNISH AND DELIVER

ARE

ARE

31c. DATE SIGNED

27b. CONTRACT/PURCHASE ORDER INCORPORATES BY REFERENCE FAR 52.212-4. FAR 52.212-5 IS ATTACHED. ADDENDA

31a. UNITED STATES OF AMERICA (SIGNATURE OF CONTRACTING OFFICER)

30c. DATE SIGNED 31b. NAME OF CONTRACTING OFFICER (Type or print)

ALL ITEMS SET FORTH OR OTHERWISE IDENTIFIED ABOVE AND ON ANY ADDITIONAL

SHEETS SUBJECT TO THE TERMS AND CONDITIONS SPECIFIED.

27a. SOLICITATION INCORPORATES BY REFERENCE (FEDERAL ACQUISITION REGULATION) FAR 52.212-1, 52.212-4. FAR 52.212-3

AND 52.212-5 ARE ATTACHED. ADDENDA

26. TOTAL AWARD AMOUNT (For Government Use Only)

OFFER

STANDARD FORM 1449 (REV. 11/2021)

Prescribed by GSA - FAR (48 CFR) 53.212

ARE NOT ATTACHED.

ARE NOT ATTACHED.

AUTHORIZED FOR LOCAL REPRODUCTION

PREVIOUS EDITION IS NOT USABLE

30b. NAME AND TITLE OF SIGNER (Type or print)

30a. SIGNATURE OF OFFEROR/CONTRACTOR

28. CONTRACTOR IS REQUIRED TO SIGN THIS DOCUMENT AND RETURN

25. ACCOUNTING AND APPROPRIATION DATA

29. AWARD OF CONTRACT: REFERENCE

32e. MAILING ADDRESS OF AUTHORIZED GOVERNMENT REPRESENTATIVE

32c. DATE 32b. SIGNATURE OF AUTHORIZED GOVERNMENT REPRESENTATIVE

ACCEPTED, AND CONFORMS TO THE CONTRACT, EXCEPT AS NOTED:

32a. QUANTITY IN COLUMN 21 HAS BEEN

RECEIVED INSPECTED

40. PAID BY39. S/R VOUCHER NUMBER38. S/R ACCOUNT NUMBER

37. CHECK NUMBER

FINALPARTIAL

36. PAYMENT

FINALPARTIAL

35. AMOUNT VERIFIED

CORRECT FOR

34. VOUCHER NUMBER33. SHIP NUMBER

COMPLETE

32g. E-MAIL OF AUTHORIZED GOVERNMENT REPRESENTATIVE

42d. TOTAL CONTAINERS42c. DATE REC'D (YY/MM/DD)

42b. RECEIVED AT (Location)

42a. RECEIVED BY (Print)

41c. DATE41b. SIGNATURE AND TITLE OF CERTIFYING OFFICER

41a. I CERTIFY THIS ACCOUNT IS CORRECT AND PROPER FOR PAYMENT

STANDARD FORM 1449 (REV. 11/2021) BACK

24.

AMOUNT

23.

UNIT PRICE

22.

UNIT

21.

QUANTITY

20.

SCHEDULE OF SUPPLIES/SERVICES

19.

ITEM NO.

Dimas, CA 91773; operational training and delivery to Laurel, MS 39443. National Forests of Mississippi 0807 4588

32f. TELEPHONE NUMBER OF AUTHORIZED GOVERNMENT REPRESENTATIVE

32d. PRINTED NAME AND TITLE OF AUTHORIZED GOVERNMENT REPRESENTATIVE

78 2 of

Type 6 Fire Engine Vehicle Upfit

1240LP27Q0005

Description

This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Part 12. This announcement constitutes the only solicitation. Quotations are being requested and a separate written solicitation will not be issued.

Solicitation number 1240LP27Q0005 is issued as a Request for Quotation (RFQ) for Type 6 Fire Engine Vehicle Upfit.

This acquisition is set-aside for small business concerns. The applicable North American Industry Classification Standard Code is 336211. The small business size standard is 1,000 Employees. This acquisition is a Total Small Business Set-Aside. All responsible sources may submit a quotation which will be considered by the agency.

Statement of Requirement Provide and install Type 6 Fire Engine Prototype Platform Body, on Govt-furnished gas 4X4 cab & chassis per Forest Service specifications. Work includes pick up of chassis in San Dimas, CA 91773 and delivery to Laurel, MS 39443. Contractor shall provide operational training to the receiving unit.

Schedule of Items

CLIN Description Estimated Quantity

Unit of Issue

Unit Cost Total

0001 Type 6 Fire Engine Prototype Platform Body

1 EA $ $

TOTAL

Technical Data

Technical data and supporting documentation associated with this solicitation are available through the following sources:

1. Solicitation Attachments The following documents are included as attachments to this solicitation and can be accessed via the “Attachments/Links” section of the posting.

Attachment 1 – Statement of Work Attachment 2 – Technical Specifications/Drawings and Diagrams

Federal Acquisition Regulation (FAR) and United States Department of Agriculture Acquisition Regulation (AGAR) Clauses and Provisions The clauses and provisions contained herein are applicable to any order awarded as a result of this solicitation. The terms and conditions set forth herein supersede all other terms and conditions.

Acceptance of the order in accordance with (IAW) FAR 12.201-1(b)(2) constitutes acceptance of all terms and conditions contained herein.

As part of the Revolutionary FAR Overhaul (RFO), system updates may lag policy updates. The System for Award Management (SAM) may continue to require entities to complete representations based on provisions that are not included in this solicitation. Contracting officers will rely on representations from offers based on provisions in the solicitation. Entities are not required to, nor are they able to, update their entity registration to remove these representations in SAM.

52.252-2 Clauses Incorporated by Reference Feb 1998 This solicitation incorporates one or more clauses by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. Also the full text of the clause may be accessed electronically at Internet address https://www.acquisition.gov/far-overhaul/far-part-deviation-guide/far-overhaul-part-52

52.212-4 Terms and Conditions—Commercial Products and Commercial Services (Nov 2025) ☐ Alternate I (Nov 2025) of 52.212-4 52.203-17 Contractor Employee Whistleblower Rights (Nov 2023) 52.203-19 Prohibition on Requiring Certain Internal Confidentiality Agreements or Statements (Jan 2017) 52.222-50 Combating Trafficking in Persons (Nov 2025)

☐ Alternate I (Nov 2025) of 52.222-50 52.226-8 Encouraging Contractor Policies to Ban Text Messaging While Driving (May 2024) 52.232-39 Unenforceability of Unauthorized Obligations (Jun 2013) 52.232-40 Providing Accelerated Payments to Small Business Subcontractors (Mar 2023) 52.233-3 Protest After Award (Sep 2025) 52.233-4 Applicable Law for Breach of Contract Claim (Sep 2025) 52.240-91 Security Prohibitions and Exclusions (Nov 2025)

☐ Alternate I (Nov 2025) of 52.240-91 52.244-6 Subcontracts for Commercial Products and Commercial Services (Nov 2025)

The following clauses are applicable if checked:

☐ 52.203-6 Restrictions on Subcontractor Sales to the Government (Jun 2020) with Alternate I (Nov 2021) of 52.203-6 ☐ 52.203-13 Contractor Code of Business Ethics and Conduct (Nov 2021) ☐ 52.204-9 Personal Identity Verification of Contractor Personnel Jan 2011 ☒ 52.204-13 System for Award Management—Maintenance (Nov 2025) ☐ 52.204-91 Contractor identification (Nov 2025) ☒ 52.209-6 Protecting the Government’s Interest When Subcontracting with Contractors Debarred, Suspended, or Proposed for Debarment (Sep 2025) ☐ 52.209-9 Updates of Publicly Available Information Regarding Responsibility Matters (Sep 2025) ☒ 52.209-10 Prohibition on Contracting with Inverted Domestic Corporations (Sep 2025) ☐ 52.219-4 Notice of Price Evaluation Preference for HUBZone Small Business Concerns (Nov 2025) ☒ 52.219-6 Notice of Total Small Business Aside (Nov 2025)

☐ Alternate I (Mar 2020).

☐ 52.219-8 Utilization of Small Business Concerns (Nov 2025) ☐ 52.219-9 Small Business Subcontracting Plan (Nov 2025)

☐ Alternate III (Nov 2025) of 52.219-9.

☐ Alternate IV (Nov 2025) of 52.219-9

☐ 52.219-14 Limitations on Subcontracting (Nov 2025) ☐ 52.219-16 Liquidated Damages—Subcontracting Plan (Nov 2025) ☐ 52.219-33 Nonmanufacturer Rule (Nov 2025) ☒ 52.222-3 Convict Labor (June 2003) ☒ 52.222-19 Child Labor—Cooperation with Authorities and Remedies (Nov 2025) ☒ 52.222-35 Equal Opportunity for Veterans (Nov 2025)

☐ Alternate I (Jul 2014) of 52.222-35 ☒ 52.222-36 Equal Opportunity for Workers with Disabilities (Nov 2025)

☐ Alternate I (Jul 2014) of 52.222-36 ☒ 52.222-37 Employment Reports on Veterans (Nov 2025) ☐ 52.222-40 Notification of Employee Rights Under the National Labor Relations Act (Dec 2010 ☐ 52.222-41 Service Contract Labor Standards (Aug 2018) ☐ 52.222-42 Statement of Equivalent Rates for Federal Hires (May 2014)

This Statement is for Information Only:

It is not a Wage Determination

Employee Class Monetary Wage -- Fringe Benefits

Aircraft Mechanic $XX.XX

☐ 52.222-43 Fair Labor Standards Act and Service Contract Labor Standards -- Price Adjustment (Multiple Year and Option Contracts) (Aug 2018) ☐ 52.222-44 Fair Labor Standards Act and Service Contract Labor Standards -- Price Adjustment (May 2014) ☐ 52.222-51 Exemption from Application of the Service Contract Labor Standards to Contracts for Maintenance, Calibration, or Repair of Certain Equipment-Requirements (May 2014) ☐ 52.222-53 Exemption from Application of the Service Contract Labor Standards to Contracts for Certain Services-Requirements (Nov 2025) ☒ 52.222-54 Employment Eligibility Verification (Nov 2025) ☒ 52.222-62 Paid Sick Leave Under Executive Order 13706 (Jan 2022) ☒ 52.222-90 Addressing DEI Discrimination by Federal Contractors (Apr 2026) ☐ 52.223-2 Reporting of Biobased Products Under Service and Construction Contracts (Nov 2025) ☐ 52.223-9 Estimate of Percentage of Recovered Material Content for EPA-Designated Items (May 2008)

☐ Alternate I (May 2008) of 52.223-9

☐ 52.223-11 Ozone-Depleting Substances and High Global Warming Potential Hydrofluorocarbons (Nov 2025) ☐ 52.223-12 Maintenance, Service, Repair, or Disposal of Refrigeration Equipment and Air Conditioners (Nov 2025) ☒ 52.223-23 Sustainable Products and Services (Nov 2025) ☐ 52.224-3 Privacy Training (Jan 2017)

☐ Alternate I (Jan 2017) of 52.224-3 ☐ 52.225-1 Buy American-Supplies (Nov 2025)

☐ Alternate I (Oct 2022) of 52.225-1 ☐ 52.225-3 Buy American--Free Trade Agreements--Israeli Trade Act (Nov 2025)

☐ Alternate II (Nov 2025) of 52.225-3.

☐ Alternate III (Nov 2025) of 52.225-3.

☐ Alternate IV (Oct 2022) of 52.225-3

☒ 52.225-5 Trade Agreements (Nov 2023) ☐ 52.225-19 Contractor Personnel in a Designated Operational Area or Supporting a Diplomatic or Consular Mission outside the United States (May 2020) ☐ 52.225-26 Contractors Performing Private Security Functions Outside the United States (Oct 2016) ☐ 52.226-4 Notice of Disaster or Emergency Area Set-Aside (Nov 2007) ☐ 52.226-5 Restrictions on Subcontracting Outside Disaster or Emergency Area (Aug 2025) ☐ 52.229-12 Tax on Certain Foreign Procurements ☐ 52.232-29 Terms for Financing of Purchases of Commercial Products and Commercial Services (Nov 2021) ☐ 52.232-30 Installment Payments for Commercial Products and Commercial Services (Nov 2021) ☒ 52.232-33 Payment by Electronic Funds Transfer— System for Award Management (Oct 2018) ☐ 52.232-34 Payment by Electronic Funds Transfer—Other Than System for Award Management (Jul 2013) ☐ 52.232-36 Payment by Third Party (Nov 2025) ☐ 52.237-2 Protection of Government Buildings, Equipment, and Vegetation (Apr 1984) ☐ 52.237-3 Continuity of Services (Jan 1991) ☐ 52.240-92 Security Requirements (Nov 2025) ☐ 52.240-93 Basic Safeguarding of Covered Contractor Information Systems (No 2025) ☐ 52.247-64 Preference for Privately Owned U.S.-Flag Commercial Vessels (Nov 2025)

☐ Alternate I (Apr 2023) of 52.247-64.

☐ Alternate II (Nov 2021) of 52.247-64

Other Applicable Clauses

52.245-1 Government Property (Sep 2021) ☐ Alternate I (Sep 2021) of 52.245-1 52.245-2 Government Property

52.245-9 Use and Charges

AGAR Clauses This solicitation incorporates one or more clauses by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. Also, the full text of the clause may be accessed electronically at Internet address https://www.usda.gov/guidance-documents/acquisition-policy/ocp/usda-agar30-sept-26pdf.

AGAR 452.203-70 Unenforceable Supplier Terms (MAY 2026)

AGAR 452.204–70 Modification for Contract Closeout (Apr 2026)

AGAR 452.236-70 Electronic Submission of Payment Requests (Sep 2026)

Solicitation Information

Award Type

It is anticipated that a Firm-Fixed Priced Purchase Order will be awarded as a result of this synopsis/solicitation.

The Government intends to make one award from this solicitation. Therefore, to be considered responsive, contractors must submit pricing for all items.

Evaluation-Commercial Items The provision at Federal Acquisition Regulation (FAR) 52.212-2 Evaluation of Commercial Items is not applicable to this solicitation. In lieu of this provision, quotes will be evaluated in accordance with FAR 12.203 based on the criteria listed below. Award will be made to the offeror representing the best value to the Government.

Price:

The offeror’s quotation will be evaluated in accordance with FAR 12.204, to determine if it is fair and reasonable.

Technical Acceptability:

Technical Acceptability will be evaluated to receive an overall rating of "acceptable" or "unacceptable." This will be based on the offeror's ability to provide a sound and compliant approach that meets all requirements and shows a thorough understanding of them. It is the contractor's responsibility to ensure their quotation clearly demonstrates their capability to meet these requirements. All offerors must provide the following minimum information and documentation with their quotations to be considered responsive and have their offers evaluated:

Detailed explanation of the offeror’s ability to perform the required services. A simple statement of capabilities will not suffice. The offeror must address how they will accomplish the requirements of sections 8.0 and 9.0 of the Statement of Work.

Detailed explanation of any requirement listed in the Statement of Work that cannot be successfully accomplished by the offeror. Offerors are advised that the USDA intends to award without discussions so any exceptions may cause the quotation to be found technically unacceptable.

Past Performance:

The Government may utilize any references provided by the Contractor, along with information available from past contracts/orders with the USDA and any information found using sources such as Federal Government sources or the Contractor Performance Assessment Reporting System (CPARS) to determine if the Contractor has acceptable or neutral Past Performance. Past Performance will be evaluated using the following rating system:

• Acceptable: The contractor shows a demonstrated ability to meet contract requirements in prior or current contracts, including quality of work, timeliness, cost control, business relations, and adherence to contract terms.

• Neutral: Offeror does not have a past performance record.

• Unacceptable: The contractor has a documented history of failing to meet contract requirements, including poor quality, missed deadlines, cost overruns, lack of responsiveness, or unethical behavior.

Evaluation Method The Government will evaluate quotations based on the lowest price technically acceptable criteria.

Only the lowest priced offer will be evaluated for Technical Acceptability. Should the lowest priced offer not receive an acceptable technical or past performance rating, the process will continue in order of lowest priced offer until the lowest price, technically acceptable offer with acceptable or neutral past performance is identified.

Other Information - Include any other information as needed for the solicitation.

52.252-1 Solicitation Provisions Incorporated by Reference Feb 1998 This solicitation incorporates one or more solicitation provisions by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. The offeror is cautioned that the listed provisions may include blocks that must be completed by the offeror and submitted with its quotation or offer. In lieu of submitting the full text of those provisions, the offeror may identify the provision by paragraph identifier and provide the appropriate information with its quotation or offer. Also, the full text of a solicitation provision may be accessed electronically at this/these address(es): https://www.acquisition.gov/far-overhaul/far-part-deviation-guide/far-overhaul-part-52

52.212-1 Instructions to Offerors - Commercial Products and Commercial Services (Nov 2025)

FAR 52.212-1 is amended as follows:

Period for acceptance of offers.

The Offeror agrees to hold the prices in its offer firm for 90 calendar days from the date specified for receipt of offers.

Questions Questions shall be submitted via email to Steven.Dahlgren@usda.gov and are due no later than November 12, 2026, at 5:00 PM Mountain Time. This will ensure enough time to respond before the solicitation period ends. Please include the solicitation name and number as the subject line of the email.

52.203-18 Prohibition on Contracting with Entities that Require Certain Internal Confidentiality Agreements or Statements-Representation (Jan 2017) 52.209-2 Prohibition on Contracting with Inverted Domestic Corporations - Representation (Sep 2025) 52.209-11 Representation by Corporations Regarding Delinquent Tax Liability or a Felony Conviction under any Federal Law (Sep 2025) 52.240-90 Security Prohibitions and Exclusions Representations and Certifications (Nov 2025)

The following provisions are applicable if checked:

☐ 52.203-11 Certification and Disclosure Regarding Payments to Influence Certain Federal Transactions (Sep 2024) ☒ 52.204-7 System for Award Management—Registration (Nov 2025)

☐ Alternate I (Nov 2025) to 52.204-7 ☐ 52.204-90 Offeror Identification (Nov 2025) ☐ 52.207-6 Solicitation of Offers from Small Business Concerns and Small Business Teaming Arrangements or Joint Ventures (Multiple-Award Contracts) (Aug 2024) ☐ 52.209-12 Certification Regarding Tax Matters (Oct 2025) ☐ 52.219-2 Equal Low Bids (Nov 2025) ☐ 52.222-18 Certification Regarding Knowledge of Child Labor for Listed End Products (Feb 2021) ☐ 52.222-48 Exemption from Application of the Service Contract Labor Standards for Maintenance, Calibration, or Repair of Certain Equipment–Certification (Nov 2025) ☐ 52.222-52 Exemption from Application of the Service Contract Labor Standards for Certain Services-Certification (Nov 2025) ☐ 52.222-56 Certification Regarding Trafficking in Persons Compliance Plan (Oct 2020) ☐ 52.223-4 Recovered Material Certification (May 2008) ☐ 52.225-2 Buy American Certificate (Oct 2022) ☐ 52.225-4 Buy American-Free Trade Agreements-Israeli Trade Act Certificate (Nov 2025) ☒ 52.225-6 Trade Agreements-Certificate (Feb 2021) ☐ 52.226-3 Disaster or Emergency Area Representation (Nov 2007) ☐ 52.229-11 Tax on Certain Foreign Procurements—Notice and Representation (Jul 2025)

AGAR Provisions This solicitation incorporates one or more provisions by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. Also, the full text of the clause may be accessed electronically at Internet address https://www.usda.gov/guidance-documents/acquisition-policy/ocp/usda-agar30-sept-26pdf.

NOTICE FOR FILING AGENCY PROTESTS

United States Department of Agriculture (USDA) Protest Procedures

The United States Department of Agriculture (USDA) is committed to fair, transparent, and efficient acquisitions. Interested parties with concerns about this solicitation are encouraged to seek resolution through the following USDA procedures.

Tier 1: Contracting Officer Concern Resolution

Submission: Interested parties with concerns about either the solicitation or subsequent award should first submit their concern directly to the Contracting Officer, providing sufficient detail to allow the Contracting Officer to understand and assess the issue.

Process: The Contracting Officer will review the concern, seek clarification as needed, and engage with the interested party to attempt prompt resolution.

Review Timeline: The Contracting Officer will make every effort to provide a response or resolution within 10 business days of receiving the concern.

Effect on Award or Performance: Tier 1 engagement is not considered an official notification of filing an agency protest and does not pause solicitation deadlines, delay award decisions, or suspend contract performance.

Next Steps: If the matter cannot be resolved at Tier 1, the interested party may file a written agency protest under Tier 2.

USDA encourages all parties to seek resolution with the Contracting Officer before filing an agency protest.

Tier 2: Agency Protest If concerns cannot be resolved at Tier 1, an interested party may file a written agency protest with either the Contracting Officer or the USDA Independent Review Authority. The decision by the USDA Independent Review Authority is an alternative to a decision by the Contracting Officer. The USDA Independent Review Authority will not consider an appeal of the Contracting Officer’s decision on an agency protest.

The protest must state whether the protester elects review by the Contracting Officer, by the UDSA Independent Review Authority. If no election is stated, the Contracting Officer will decide the protest.

Required Information: Protests shall include the information set forth in FAR 33.104-4 (a)(3).

Failure to submit the required information may result in a delay or dismissal of the protest.

Submission: Agency protests should be submitted electronically to SPE.inquiry@usda.gov and the Contracting Officer.

Timeliness: Protests must be filed within the timeframes specified in FAR 33.104.

Effect on Award or Performance: Contract awards or performance will be suspended during the protest period unless justified in writing for urgent and compelling reasons or determined to be in the best interest of the Government.

Review Timeline: USDA strives to resolve agency-level protests within 35 business days of receipt.

Election of Forum: By filing a protest with USDA, the protesters agree not to file a protest on the same matter with the Government Accountability Office (GAO) or any other external forum while the agency protest is pending. If such a protest is filed externally, the USDA agency protest will be dismissed.

Questions: Questions regarding this notice or protest procedures should be directed to the Contracting Officer identified in this solicitation.

US Department of Agriculture (USDA)

Statement of Work

WO Fleet – 2026 Type 6 Fire Engine Body

June 22, 2026

Contents Project General Information

1.0 Scope of Work

2.0 Background

Contractor Requirements

3.0 Technical Requirements / Tasks

4.0 Government Furnished Property

5.0 Period of Performance

6.0 Place of Performance

7.0 Inspection and Acceptance

8.0 Deliverables / Schedules

9.0 Travel and Delivery location

5.0 Period of Performance ...................................................................................................................... Error! Bookmark not defined.

6.0 Place of Performance ........................................................................................................................ Error! Bookmark not defined.

7.0 Inspection and Acceptance

8.0 Deliverables / Schedules

9.0 Delivery Locations

Project WO Fleet – 2026 Type 6 Fire Engines – Body Only

General Information

1.0 Scope of Work

Provide and install Type 6 Fire Engine Prototype Platform Body, on Govt-furnished gas 4X4 cab & chassis per Forest Service specifications. Work includes pick up of chassis in San Dimas, CA 91773 and delivery to Laurel, MS 39443.

Contractor shall provide operational training to the receiving unit.

2.0 Background

Forest Service firefighters, using Forest Service fire engines and equipment, respond to thousands of wildfires each year.

Fire crews and engines fight fire on National Forest System land and/or aid other federal, tribal, state or local partners.

Forest Service wildland fire engines carry special equipment to spray water and foam. Crews on these engines perform a variety of wildland fire tasks:

Serve as initial attack Hold established perimeter on prescribed fires and wildfires Use water, foam and hand tools to put out fires and keep structures and vegetation from burning Patrol forests and grasslands for signs of wildfires Promote fire prevention with national forest visitors

Contractor Requirements

3.0 Technical Requirements / Tasks

See attached specifications titled Type 6 Fire Engine, Model 643P, Apparatus Body Only, dated June 2026

4.0 Government Furnished Property

One (1) 2025 Model year 4X4 gas Ford cab and chassis, 19,500 GVWR.

5.0 Period of Performance

24 months from the date of contract issuance.

6.0 Place of Performance

Services are provided (off-site) entirely at the contractor’s facility within the U.S.

7.0 Inspection and Acceptance

Inspectors travel to Contractor, upon completion of fire engine, to conduct final inspection. Inspectors will check for compliance with specifications.

8.0 Deliverables / Schedules

Contractor is required to submit a production schedule no later than two (2) months after contract issuance.

Contractor shall be required to provide monthly updates via email or virtual meetings with the COR. Meeting frequency may vary according to production schedule.

Contractor shall notify COR via email one (1) month prior to completion of unit so a site visit/inspection can be scheduled.

Contractor shall arrange for delivery of the completed unit within ten (10) days of final inspection.

Contractor shall provide operational training within a month of delivery.

Key Deliverables

Item No. Deliverable Objective Due 1 Submit Production

Schedule Via email to

COR

Provides COR with tentative date of completion Within two (2) months of contract issuance.

2 Production Status updates

Quality Assurance Monthly as agreed between the parties

3 Notify COR by email upon completion of Fire Engines

Allows COR to schedule timely inspection One month prior to completion of unit

4 Arrange for Delivery Ensure timely receipt of unit after inspection 10 days after final inspection 5 Provide Operation

Training User are familiar with new apparatus 1 month after delivery

9.0 Travel and Delivery location

Contractor travels to Laurel, MS to conduct operational training. Travel expenses will not be reimbursed for delivery and operational training.

2026 Type 6 Prototype Platform Body - Delivery Address

Region Forest New EN City State Zip

08 National Forests in Mississippi 4588 Laurel MS 39443

POC provided at the time of contract award.

Type 6 Fire Engine — Model 643P Apparatus Body Only Specification

Issue Date: June 2026

Type 6 Fire Engine, Model 643P – June 2026

TABLE OF CONTENTS

TABLE OF CONTENTS

RECORD OF REVISIONS

1 — GENERAL

1.1 General Statement

1.2 In-Service Weight

1.3 NFPA 1900 Requirements

1.4 Tilt Test

1.5 Apparatus Body Material

1.6 Brand Name or Equivalent Products

2 — CHASSIS ELECTRICAL REQUIREMENTS

2.1 Chassis Electrical Additional Equipment and Modifications

2.2 Master Body Disconnect Switch

2.3 Battery “On” Indicator Light

2.4 Junction Box

2.5 Bulkhead Connections

2.6 Ground Lighting

2.7 Back Up Alarm

2.8 Radio Antenna

2.9 Radio Pre-Wire

2.10 Rear View Backup Camera

2.11 Tire Pressure Monitoring System (TPMS)

3 — TRAFFIC WARNING SYSTEMS

3.2 Electronic Siren

3.3 Speaker

3.4 Forward Upper Zone A/B/D Light Bar

3.5 Forward Lower Zone A Warning Lights

3.6 Forward Zone B/D Warning Lights

3.7 Aft Lower Zone C Warning Lights

3.8 Headlight Flasher

4 — CHASSIS ADDITIONS AND MODIFICATIONS

4.1 Additional Equipment

4.2 Apparatus Fluid Types and Quantities

4.3 Seating Capacity

4.4 Seating

4.5 Seat Belt Warning

4.6 3.6 Vehicle Height/Weight/Length Warning

4.7 Final Stage Manufacturer Vehicle Certification

4.8 Noise Hazard Warning

4.9 Air Filter Ember Protection Screen Warning

4.10 “Do Not Move Apparatus” Warning

4.11 Cab Console

4.12 Switch Panel

4.13 Front Bumper and Brush Guard

4.14 Off-Road Driving Light

4.15 Winch

4.16 Rear Bumper

4.17 Mud Flaps

4.18 Exhaust System

4.19 Fuel Hose and Electrical Harness Protection

4.20 3.19 Chassis Air Intake Ember Guard

4.21 Cabin Air Ember Guard

4.22 Front Tow Hooks

4.23 Rear Tow Hooks

5 — APPARATUS BODY DESCRIPTION

5.1 General Requirements

5.2 Platform Construction

5.3 Drilling, Grinding, and Welding

5.4 Understructure

5.5 Dimensions

5.6 Welding

5.7 Installation

5.8 Platform Mounting

5.9 Long Sills

5.10 Cross Sills

5.11 4.11 Outer Rail

5.12 Platform Deck

5.13 Rear Cab Protection

5.14 Tailboard

5.15 Rear Steps and Handrail

5.16 Fuel Tank Filler

5.17 Draft Line Storage

5.18 Compartmentation

5.19 Front Pass Through Compartment

5.20 Driver’s Side Compartments

5.21 Passenger Side Compartments

5.22 Compartment Doors

5.23 Door Latches and Hardware

5.24 Door Hold Open Devices

5.25 Adjustable Shelf Channels

5.26 Compartment Shelves

5.27 Compartment Venting

5.28 Compartment Floor Mats

6 — PUMP AND PLUMBING

6.1 Accessories Provided

6.2 Plumbing Components

6.3 Fasteners and Adjustable Plumbing Brackets

6.4 Pump Compartment Components

6.5 Auxiliary Pump

6.6 Pump Specifications

6.7 Rear Mounted Pump Operator's Panel

6.8 Pump Panel Lights

7 — VALVES, CONTROLS, GAUGES AND PLUMBING REQUIREMENTS

7.1 Discharge and Intake Plumbing

7.2 Freeze Protection

7.3 Truck Identification and Pump Performance Plate

7.4 Pump Operating Instruction Plate

7.5 Test Gauge Connections

7.6 Winterization Port

7.7 Pump Panel Labeling

7.8 Compound Pressure Gauge

7.9 Water Tank Level Electronic Gauges

7.10 Pump Cooler/By-Pass

7.11 Priming Pump

7.12 Stainless Intake Strainer

7.13 Discharge Locations

7.14 Intake Location and Size

7.15 Tank Fill

7.16 Tank to Pump Line

7.17 Booster Hose Reel

7.18 Foam Proportioning System –

7.19 Pump Performance Test and Certification

8 — WATER TANK

8.1 Fabrication

8.2 Baffling

8.3 Panel Sight Gauge

8.4 Tank Over-Flow System

8.5 Tank Drain

8.6 Clean Out Plug

8.7 Tank Capacity

8.8 Foam Tank

8.9 Spare Tire Storage

9 — BODY ELECTRICAL REQUIREMENTS

9.1 General Electrical Statement

9.2 Lighting

9.3 Taillights, Brake Lights

9.4 Turn Signal Lights

9.5 Back Up Lights

9.6 License Plate Bracket and Light

9.7 Compartment Lights

10 — ELECTRICAL SYSTEM PERFORMANCE TEST, LOW-VOLTAGE

10.1 General Test Requirement

10.2 Test Sequence

10.3 Reserve Capacity Test

10.4 Alternator Performance Test at Idle

10.5 Alternator Performance Test at Full Load

10.6 Low Voltage Alarm Test

10.7 Documentation

11 — APPARATUS FINISH

11.1 Apparatus Body Color

11.2 Door Decal (shield and Vehicle Numbers)

12 — EQUIPMENT

12.1 Equipment Provided

12.2 Manuals and Drawings

12.3 Road Kit

12.4 Wheel Chocks

12.5 Wheel Chock Mounting Brackets

12.6 Hydrant Wrench Holder and Wrenches

12.7 Drip Torch Tray

12.8 Tool Bracket Mounting

13 — WARRANTY PROVISIONS

13.1 10 Year Apparatus Warranty

13.2 Water Tank Warranty

Record of Revisions

Date Revision summary

June 2026 • Initial Release

[Future revisions] • This space is reserved for future revisions.

1 — General

1.1 General Statement

1.1.1 The platform body described in this specification shall be mounted on Government furnished cab and chassis. Government furnished cab and chassis shall be picked up by the apparatus manufacturer at designated locations. The apparatus manufacturer shall be liable for all loss and damage to Government furnished cab and chassis until completion and final acceptance of work and returned to the Government.

1.2 In-Service Weight

1.2.1 The completed apparatus shall not exceed 15000 lbs. with all equipment specified in the contract installed, including all required chassis fluids filled to the manufacturer’s recommended levels, chassis and auxiliary pump motor fuel tanks full, water and foam tanks filled to the max capacity as identified by the tank manufacturer. This 15000lb limit does not include the in-service weight requirement of 250lbs per seating position and 1300lbs of gear weight.

1.2.2 The in-service weight shall not exceed the OEM chassis front axle rating and 90% of the rear gross axle weight rating when: fully loaded with water, foam and fuel, with 250 pounds per seating position and 1300 pounds of equipment evenly distributed in the storage compartments.

1.3 NFPA 1900 Requirements

1.3.1 The completed apparatus described in this specification shall be compliant with the requirements of NFPA 1900, latest edition, except where noted.

1.4 Tilt Test

1.4.1 The apparatus shall be tilted to 30° minimum before lifting a tire or tire set when tested at the estimated in-service weight in accordance with NFPA 1900.

1.5 Apparatus Body Material

1.5.1 The apparatus body shall be designed and constructed of materials consistent with current fire apparatus engineering technology and design standards.

1.6 Brand Name or Equivalent Products

1.6.1 Products equivalent to the brand name components specified herein may be approved by the Government. Equivalent products shall not be used unless approved in writing by the Government prior to contract award and documented in the resultant contract. After the contract award, approvals for equivalent products may be considered, and if approved, shall be documented in writing by the Government.

2 — Chassis Electrical Requirements

2.1 Chassis Electrical Additional Equipment and Modifications

2.1.1 The apparatus chassis shall be equipped with a heavy-duty 12-volt direct current (VDC) negative ground electrical system. The electrical system shall include all parts, components, switches, relays, wiring, and other devices required to assure complete, consistent and proper operation of the completed apparatus. All Wiring shall be routed and/or protected to eliminate exposure to moving parts or debris.

2.1.2 The electrical system will be fabricated in modules as is the apparatus. The body and chassis will be individually wired as independent modules and connected as a completed unit at the final assembly via bulkhead type waterproof electrical connectors located in the body floor adjacent to the electrical compartment. All GXL/SXL wiring for the apparatus body will be within a temperature resistant harness rated at a minimum of 280 degrees Fahrenheit. All wires in each harness must be color and function coded. Wiring will be run along structural rails and tied in a neat and orderly manner. Wiring shall be routed and/or protected to eliminate exposure to moving parts or debris. Wiring passing through compartments shall be protected from tears, abrasions, and cuts caused by loose item moving in the compartment space.

2.1.3 All lights shall comply with Federal Government Codes for vehicles of this size and design shall be provided and installed. These lights shall include headlamps and front turn signals with hazard switch, cab marker and clearance lights, back up lights, stop-turn-tail and license plate lights.

2.1.4 All switches for the warning lights and other electrical equipment shall be mounted on a separate switch panel located in the cab on a master electrical console mounted between the two front seats. The switches shall be functionally laid out, properly identified, and shall be located within easy reach of both the driver and the officer. The warning light system shall have a “master” switch, which shall allow for the pre-selection of all warning lights. All switches shall be of a heavy-duty design.

2.1.5 If the chassis manufacturer supplied upfitter switches are utilized for electrical equipment they shall be properly marked and identified on the upfitter switch panel.

2.2 Master Body Disconnect Switch

2.2.1 One master body disconnect switch shall be provided in the cab. The switch shall be rated for 175 amps continuous duty and 800 amps intermittent duty. The switch shall be labeled “ON/OFF” and shall be located driver's side of the center console's vertical surface near the floorboard. It shall be positioned not to impact the driver's seat or operation of the vehicle.

The exposed terminals shall be protected from damage and inadvertent contact. When in the “OFF” position, all electrical power to the apparatus fire package shall be off. Power to the chassis shall remain separate from this switch. A Cole Hersee™, Model #M-2484-16, with Model #82065 switch plate “ON/OFF” label meets this requirement.

2.3 Battery “On” Indicator Light

2.3.1 One “Battery On” indicator light, with a green lens, shall be provided on the cab center console, located forward on the left side. This light shall illuminate when the battery switch is turned to the “ON” position and the brightness shall dim automatically via multiplexing system when the chassis headlights are turned on.

2.4 Junction Box

2.4.1 An electrical junction box for all apparatus modules, connections, relays, circuit breakers, etc. shall be located within the console area. All connection points shall be labeled according to function. Wire length within the box shall be sufficient to allow a minimum of two inches of slack to allow for secure connections and ease of service. All wire shall be installed in an organized fashion. The junction box shall be constructed from black powder coated stainless steel with a hinged door and a spring-loaded push-button style latch. The junction box shall not interfere with crew seating or access.

2.5 Bulkhead Connections

2.5.1 All apparatus body wiring either entering or exiting the cab shall be in a harness configuration and pass through a centralized location as close to the interior electrical junction box as possible. The harness(s) shall terminate at the point of the cab entry/exit with a hermetic bulkhead connector(s), designed to facilitate in the separation of the cab/chassis/apparatus body. A Pacific Aerospace and Electronics™ (PA&E) bulkhead connector or equivalent shall be installed.

2.6 Ground Lighting

2.6.1 Six clear round 35 lumen minimum L.E.D. lights shall be provided around the vehicle's perimeter. The lights shall be activated when either the “GROUND LIGHTS” switch is activated on the center console, when a cab door is open, or when the vehicle is placed in “blocking mode.” The vehicle is in blocking mode when the vehicle transmission is in “park” with the parking brake set and the emergency master switch turned on with the forward-facing takedown lights off. The ground lighting “OFF” delay shall be synchronized with the chassis exterior courtesy lighting delay.

2.6.2 Ground light locations shall be as follows:

2.6.2.1 Two lights shall be provided under the apparatus front bumper.

2.6.2.2 Four lights shall be provided under the apparatus body, one forward and one aft of the rear wheel wells, both sides of the body. The lights shall be housed within an enclosure sufficient to protect from damage within the compartments.

2.6.2.3 The lights shall be wired to the “Ground Lights” switch located in the cab center console.

2.7 Back Up Alarm

2.7.1 One solid state back up alarm shall be provided at the rear of the apparatus protected from impact and debris. The projector shall be mounted in such a manner that debris and dirt does not collect. The backup alarm shall be wired to the reverse circuit of the transmission and shall provide an audible alarm to the rear of the apparatus when reverse gear is selected. The alarm shall have a volume of 87 to 112 decibels while in operation. The alarm shall have a disconnect plug for easy replacement.

2.8 Radio Antenna

2.8.1 Two antenna bases shall be supplied and mounted on the cab roof as specified. The antenna cable shall be routed to the cab interior, terminating at location of radio mounting bracket.

2.8.2 The manufacture shall mount two NMO type ¾ – inch brass antenna mounts with rain caps on the cab roof. Alterative placement from cab of roof shall be approved by Government prior to installation.

2.8.3 The placement of the antenna mounts shall be in accordance with the antenna manufacturer’s guide including proper spacing from items that may cause interference or reduce the when and where possible.

2.8.4 All details of the antenna for Agency Radios shall be clarified at the pre-work meeting and approved by the Government prior to installation.

2.8.5 Antenna bases shall be easily identifiable or labeled

2.9 Radio Pre-Wire

2.9.1 The chassis cab interior shall be wired with fused battery power, battery ground, switched power, and radio rebroadcast wires to the siren or PA, and labeled to simplify USFS radio installation. The wiring shall allow the radio to be wired, so the radio is not powered with the master body disconnect switch turned off. The radio shall occupy the second forward, angled, position in the cab center console. Exposed positive terminals shall be covered by a protective boot or otherwise protected from inadvertent contact.

2.9.2 The console shall be wired with two (2) separate wiring bundles for connecting 2 separate agency mobile radios.

2.9.3 The antenna wires shall remain separate from the connector.

2.9.4 Each bundle including antenna wires shall be labeled RADIO 1 or RADIO 2.

2.9.5 Each wire/antenna bundle shall have a minimum of 30 inches or wire available to allow for easy installation outside of the console.

2.9.6 Radio rebroadcasting wires to siren or PA shall be clearly labeled

2.9.7 Exposed positive terminals shall be covered by a protective boot or otherwise protected from inadvertent contact

2.9.8 All details of the Pre-Wire for Agency Radios shall be clarified at the pre-work meeting and approved by the Government prior to installation.

2.10 Rear View Backup Camera

2.10.1 If not provided with the chassis, a rear-view backup camera and display shall be provided.

The monitor shall have a minimum display measurement of 6 inches diagonally and be either: 1.) factory installed in-dash with a combination AM/FM/WX radio, or 2.) aftermarket installation separate from the AM/FM/WX radio; professionally installed; mounted in a location approved in writing by the Government. The monitor display shall be shock and vibration resistant; have a high-quality backlit display; and mounting shall not allow vibration. The backup camera shall be high durability and able to withstand harsh vibration;

IP69K rated; and able to withstand 7Gs of force. The camera shall be shipped loose for installation by the apparatus builder. Mounting on top of the dash or in any location that reduces the driver’s field of vision shall not be allowed.

2.11 Tire Pressure Monitoring System (TPMS)

2.11.1 If not provided by the chassis manufacturer, a tire pressure monitoring system shall be installed. Aftermarket tire pressure monitoring systems shall be approved by the government prior to installation. Considerations for the approval of aftermarket solutions will be quality, durability, warranty, repair service, and savings to the Government.

3 — Traffic Warning Systems

3.1.1 The following traffic warning systems shall be provided and installed on the completed apparatus by the apparatus builder:

3.1.2 The Whelen Core Control System with the required expansion modules or equivalent shall be used to provide power and manage the electrical loads and emergency lighting/siren systems on the completed apparatus. This system shall be programable and serve as the primary operating system controller for the lighting, siren, emergency lighting flash patterns and load management functions of the competed apparatus.

3.1.3 All components listed in the Traffic Warning System section shall be compatible with the Whelen Core Control System.

3.2 Electronic Siren

3.2.1 The manufacturer shall supply and install one electronic siren and digital control panel with 6 auxiliary buttons, 4 position slide switch, 6 position rotary speaker tone selector, traffic director control button, manual siren button, and airhorn button in the cab center console.

The control panel shall be flush mounted. The location of the controller shall be convenient to both the driver and the officer. The siren shall have four basic siren tones: manual, wail, yelp, and hi-lo. The “emergency master” switch shall power the controller.

3.2.2 The manufacturer shall program and label the electronic siren and digital control panel’s auxiliary buttons as follows:

• Auxiliary Switch “1” – Left Alley

• Auxiliary Switch “2” – Right Alley

• Auxiliary Switch “3” – Front Flood

• Auxiliary Switch “4” – Rear Scene

• Auxiliary Switch “5” – Left Scene

• Auxiliary Switch “6” – Right Scene

• Auxiliary Switch “7” - Ground Lights

• Auxiliary Switch “8” – Cabin Lighting

3.3 Speaker

3.3.1 The manufacturer shall supply and install one 100-W siren speaker mounted behind the driver’s side of the front bumper. The manufacturer shall wire the speaker to the specified electronic siren controller. The manufacturer shall wire the lights to the siren controller located on the cab center console.

3.4 Forward Upper Zone A/B/D Light Bar

3.4.1 The manufacturer shall supply and install one light-emitting diode (LED) lightbar on the rear cab headboard, facing forward. The lightbar shall be 58 inches wide. Lightbar shall consist of ten dual-color flashing LED modules and two single color, steady burning, red LED modules and two front and two rear flood lights. Lightbar shall be programmed to specifications provided by the Government.

3.4.2 The light bar shall be mounted to the cab protection headboard and wired to the siren switch in the cab center console (Figure 1). The two forward facing “takedown” modules shall be interlocked with the application of the emergency brake, placing the apparatus in blocking mode and disabling the modules.

3.5 Forward Lower Zone A Warning Lights

3.5.1 The manufacturer shall supply and install two NFPA compliant dual color LED warning lights with mounting flanges on the front of the apparatus, forward-facing, one per side on the brush guard. The lights shall be waterproof using a vibration-welding sealing process.

The lights shall have TIR collimator optics to prevent stray warning light. The lights shall flash red and white at 75 flashes per minute (FPM) in a flicker flash pattern. The lights shall flash in opposite phase of each other when blocking the roadway. The manufacturer shall wire the lights to the siren controller located on the cab center console

3.6 Forward Zone B/D Warning Lights

3.6.1 The manufacturer shall supply and install two NFPA compliant dual color LED warning lights mounting flanges on the front corners of the apparatus chassis, side facing, one per side, as low and as far forward as possible on the sides of the hood. The warning lights shall consist of twenty-four LEDs, twelve red LEDs, twelve white LEDs, and with clear Lexan lenses. The warning light shall flash red at 75 FPM. The warning light shall have the ability to override to steady burn white for use as an additional scene light. The lights shall be waterproof using a vibration-welding sealing process. The lights shall have TIR collimator optics to prevent stray warning light. The manufacturer shall wire the lights to the Tomar brand, model 948L-SIREN-R siren, or equivalent controller located on the cab center console.

3.7 Aft Lower Zone C Warning Lights

3.7.1 The manufacturer shall supply and install two 3-inch by 7-inch single color LED warning lights with mounting flanges on the rear of the apparatus, rear-facing, one per side centered below the stop and turn signal lights. The warning lights shall consist of twelve LEDs red in color with clear Lexan lens. The lights shall be waterproof using a vibration- welding sealing process. The lights shall have TIR collimator optics to prevent stray warning light. The lights shall flash red and white at 75 flashes per minute (FPM) in a flicker flash pattern. The lights shall flash in opposite phase of each other when blocking the roadway. The manufacturer shall wire the lights to the siren controller located on the cab center console.

3.8 Headlight Flasher

3.8.1 The manufacturer shall supply and install one solid-state headlight flasher wired for daytime operation. The flasher shall be a multipurpose type with a high beam activated cut out option. The manufacturer shall wire the flasher to the siren controller “Wig Wag” switch located on the cab center console, through the parking brake valve so that it is disabled when the parking brake is applied.

4 — Chassis Additions and Modifications

4.1 Additional Equipment

4.1.1 The following additional equipment shall be installed on, and modifications performed to, the specified cab and chassis by the apparatus manufacturer:

4.2 Apparatus Fluid Types and Quantities

4.2.1 A document showing the recommended fluid types and quantities for the apparatus chassis and associated…