1240LP24Q0087- PRRD Fall FY 24 Noxious Weed Treatment.pdf

SEE ADDENDUMIS CHECKED

CODE 18a. PAYMENT WILL BE MADE BY

CODE

FACILITYCODE

17b. CHECK IF REMITTANCE IS DIFFERENT AND PUT SUCH ADDRESS IN OFFER

OFFEROR

40LP

OGDEN UT 84401-2310

324 25TH ST

USDA-FS CSA INTERMOUNTAIN 4

65T0 CODE 16. ADMINISTERED BYCODE

X

X

X

561730

SIZE STANDARD:

100.00 % FOR:SET ASIDE:UNRESTRICTED OR40LP

REQUEST FOR

PROPOSAL

(RFP)

INVITATION

FOR BID (IFB)

10. THIS ACQUISITION ISCODE

REQUEST FOR

QUOTE (RFQ)

14. METHOD OF SOLICITATION

13b. RATING

NORTH AMERICAN INDUSTRY

CLASSIFICATION STANDARD

(NAICS):

SMALL BUSINESS

08/06/2024

CURTIS LANDRETH

(No collect calls)

INFORMATION CALL:

FOR SOLICITATION 8. OFFER DUE DATE/LOCAL TIME

08/19/2024 1700 MT

b. TELEPHONE NUMBERa. NAME

4. ORDER NUMBER3. AWARD/ 6. SOLICITATION

1240LP24Q0087

5. SOLICITATION NUMBER

SOLICITATION/CONTRACT/ORDER FOR COMMERCIAL ITEMS 1. REQUISITION NUMBER PAGE OF

1 321136516OFFEROR TO COMPLETE BLOCKS 12, 17, 23, 24, & 30

TELEPHONE NO.

17a. CONTRACTOR/

CHADRON NE 69337

125 N MAIN ST

NEBRASKA NATIONAL FOREST

15. DELIVER TO

OGDEN UT 84401-2310

324 25TH ST

9. ISSUED BY

7.

2. CONTRACT NO.

EFFECTIVE DATE

$9.5

18b. SUBMIT INVOICES TO ADDRESS SHOWN IN BLOCK 18a UNLESS BLOCK BELOW

ISSUE DATE

DELIVERY FOR FREE ON BOARD

(FOB) DESTINATION UNLESS

BLOCK IS MARKED

11.

SEE SCHEDULEX

12. DISCOUNT TERMS THIS CONTRACT IS A RATED

ORDER UNDER THE DEFENSE

PRIORITIES AND ALLOCATIONS

SYSTEM - DPAS (15 CFR 700)

13a.

SERVICE-DISABLED

VETERAN-OWNED

SMALL BUSINESS

(SDVOSB)

HUBZONE SMALL

BUSINESS

8(A)

USDA-FS CSA INTERMOUNTAIN 4

WOMEN-OWNED SMALL

BUSINESS (WOSB)

ECONOMICALLY DISADVANTAGED

WOMEN-OWNED SMALL

BUSINESS (EDWOSB)

24.

AMOUNT

23.

UNIT PRICE

22.

UNIT

21.

QUANTITY

20.

SCHEDULE OF SUPPLIES/SERVICES

19.

ITEM NO.

Nebraska National Forests and Grasslands

Pine Ridge Ranger District- Fall FY24 Noxious Weed Treatment Period of Performance: 09/16/2024 to 12/13/2024

Fall Noxious Weed Treatment 254 AC

(Use Reverse and/or Attach Additional Sheets as Necessary)

HEREIN, IS ACCEPTED AS TO ITEMS:

X

XX

DATED

CURTIS R. LANDRETH

. YOUR OFFER ON SOLICITATION (BLOCK 5),

INCLUDING ANY ADDITIONS OR CHANGES WHICH ARE SET FORTH

COPIES TO ISSUING OFFICE. CONTRACTOR AGREES TO FURNISH AND DELIVER

ARE

ARE

31c. DATE SIGNED

27b. CONTRACT/PURCHASE ORDER INCORPORATES BY REFERENCE FAR 52.212-4. FAR 52.212-5 IS ATTACHED. ADDENDA

31a. UNITED STATES OF AMERICA (SIGNATURE OF CONTRACTING OFFICER)

30c. DATE SIGNED 31b. NAME OF CONTRACTING OFFICER (Type or print)

ALL ITEMS SET FORTH OR OTHERWISE IDENTIFIED ABOVE AND ON ANY ADDITIONAL

SHEETS SUBJECT TO THE TERMS AND CONDITIONS SPECIFIED.

27a. SOLICITATION INCORPORATES BY REFERENCE (FEDERAL ACQUISITION REGULATION) FAR 52.212-1, 52.212-4. FAR 52.212-3

AND 52.212-5 ARE ATTACHED. ADDENDA

26. TOTAL AWARD AMOUNT (For Government Use Only)

OFFER

STANDARD FORM 1449 (REV. 11/2021)

Prescribed by GSA - FAR (48 CFR) 53.212

ARE NOT ATTACHED.

ARE NOT ATTACHED.

AUTHORIZED FOR LOCAL REPRODUCTION

PREVIOUS EDITION IS NOT USABLE

30b. NAME AND TITLE OF SIGNER (Type or print)

30a. SIGNATURE OF OFFEROR/CONTRACTOR

28. CONTRACTOR IS REQUIRED TO SIGN THIS DOCUMENT AND RETURN

25. ACCOUNTING AND APPROPRIATION DATA

29. AWARD OF CONTRACT: REFERENCE

32e. MAILING ADDRESS OF AUTHORIZED GOVERNMENT REPRESENTATIVE

32c. DATE 32b. SIGNATURE OF AUTHORIZED GOVERNMENT REPRESENTATIVE

ACCEPTED, AND CONFORMS TO THE CONTRACT, EXCEPT AS NOTED:

32a. QUANTITY IN COLUMN 21 HAS BEEN

RECEIVED INSPECTED

40. PAID BY39. S/R VOUCHER NUMBER38. S/R ACCOUNT NUMBER

37. CHECK NUMBER

FINALPARTIAL

36. PAYMENT

FINALPARTIAL

35. AMOUNT VERIFIED

CORRECT FOR

34. VOUCHER NUMBER33. SHIP NUMBER

COMPLETE

32g. E-MAIL OF AUTHORIZED GOVERNMENT REPRESENTATIVE

42d. TOTAL CONTAINERS42c. DATE REC'D (YY/MM/DD)

42b. RECEIVED AT (Location)

42a. RECEIVED BY (Print)

41c. DATE41b. SIGNATURE AND TITLE OF CERTIFYING OFFICER

41a. I CERTIFY THIS ACCOUNT IS CORRECT AND PROPER FOR PAYMENT

STANDARD FORM 1449 (REV. 11/2021) BACK

24.

AMOUNT

23.

UNIT PRICE

22.

UNIT

21.

QUANTITY

20.

SCHEDULE OF SUPPLIES/SERVICES

19.

ITEM NO.

32f. TELEPHONE NUMBER OF AUTHORIZED GOVERNMENT REPRESENTATIVE

32d. PRINTED NAME AND TITLE OF AUTHORIZED GOVERNMENT REPRESENTATIVE

322 of

SECTION B – CONTINUATION OF SF-1449

Schedule of Items/Price Schedule

Project Description: Pine Ridge Ranger District- Fall Noxious Weed Treatment

Vendor Name: __________________________________Vendor UEI:___________________

Line Item Description # of Acres Unit Price per Acre Total

#1

PRRD- Fall Noxious Weed Treatment

- Thistles & Leafy Spurge (Canada, bull, musk)

254 $ $

Schedule Notes:

a) One award will be made from this solicitation; contractors must submit pricing for all items.

b) Instructions to Offerors can be found on page 26 of the RFQ.

Description of Requirement

The services covered in this solicitation and resultant contract are for applying herbicides for the control of noxious weeds on Public Lands. Areas to be treated are predominately open prairie along ephemeral streams plus the west ash and soldier creek drainage. The species being targeted are: All noxious species of thistle (Canada, musk, and scotch) and Leafy Spurge.

The preferred herbicide for the treatment of Spurge is Plateau (Imazapic), and the preferred herbicide for Thistles is a mixture of Milestone (Aminopyralid) combined 2, 4-D. Attached maps represent known locations of noxious weeds based on 2024 inventory.

LOCATION AND DESCRIPTION

Project areas that are included under this contract are Forest Service lands within the Antelope Creek, Grandmother Creek, West Ash Creek and Soldier Creek drainages located on the Pine Ridge Ranger District north of Harrison, west of Crawford, NE, and southeast of Crawford, NE.

Maps showing infestation locations and the treatment areas are attached. Areas of limited access exist within the treatment area. In these areas the contractor shall select a method of travel (motorized, foot, horseback) in meeting the contract specs.

TECHNICAL SPECIFICATIONS

NOXIOUS WEED TREATMENT SERVICES

SECTION I – GENERAL

1.1 SCOPE OF WORK. The contractor shall be required to:

• Furnish any and all labor, transportation, equipment, herbicide, supplies (including personal protective equipment), water, services, supervision, permits, and licenses necessary to treat noxious weeds.

• Spot applications by equipment can require 25 gallons of water/herbicide mix per acre for the target species. Contractor will be required to transport water to all sites.

• Apply herbicide at optimal stage of plant development to be most effective. For the species being treated, this could require the contractor to return to an area at varying times. The preferred development stage for all targeted species is in the rosette to flowering stage or when at or beyond the bud stage (summer/fall application).

• The successful contractor shall submit treatment data in the specific data format of the Nebraska National Forests & Grasslands Noxious Weeds Geodatabase. The database is an ESRI ArcGIS version 9.0 personal geodatabase. The database contains the spatial and tabular data. Many data elements are required.

• Contractor will provide GIS based maps along with raw GPS data (datum used shall be discussed with Forest Service before collection of GPS data) of treated areas along with pesticide application records to the Forest Service at the completion of treatment. The contractor will also be required to provide the Forest Service with total pounds of active ingredient per acre applied at the conclusion of the project.

• Contractor will comply with all pesticide use requirements set forth under Title 25, Chapter 2, Nebraska Administrative Code.

• This statement of work consists of completing the tasks/subtasks in Section V to the performance requirements of Section VII. Services shall be in compliance with the terms, conditions, and specifications herein.

1.1.1 LOCATION DESCRIPTION. The treatment area covers two priority sections of the Pine Ridge Ranger District. (See attached maps) These maps show the known infestation locations within these priority treatment areas based on past inventories. They are for reference only and are approximate in nature.

1.1.2 PERIOD OF PERFORMANCE. Services covered in this solicitation and resultant contract are to be performed during the 2024 field season. Work may begin when the target plants are actively growing and weather conditions allow them to be susceptible to herbicide effects as per label directions. Work may begin on or about the beginning of September 15th, 2024 and the Contractor shall complete all fieldwork by November 30th, 2024. All reports are due no later than two weeks following completion of field work.

1.1.3 ACCESSIBILITY. Specific site maps identifying units and road access shall be provided to the contractor.

1.1.4 BOUNDARIES. Maps will be provided to the contractor detailing the treatment area and identifying any interior private lands.

1.1.5 NOXIOUS AND INVASIVE WEEDS. The contractor shall be experienced in noxious and invasive weed management and herbicide use. The contractor shall be able to identify target weed species in all stages of development and to distinguish between target and non-target species.

1.1.6 CONTRACTOR REPRESENTATIVE. The contractor shall provide a contract representative for the performance of the work. The name of this person and an alternate(s) who shall act for the contractor when the contractor is absent shall be designated in writing to the contracting officer. The contractor representative or alternate shall have full authority to act for the contractor on all contract matters relating to daily operation of this contract. The contractor representative and alternate(s) must be able to read, write, speak, and understand English.

SECTION II – DEFINITIONS

2.1 STANDARD DEFINITIONS

2.1.1 ACCEPTABLE QUALITY LEVEL (AQL). The maximum allowable deviation from perfect performance that may occur before the Government will invoke payment deduction. An AQL does not allow a contractor knowingly to offer defective service, but limits reduced payment to circumstances in which defective performance results in a measurable reduction in the value of services rendered.

2.1.2 DEFECTIVE SERVICE. A unit of service which contains one or more defects, or nonconformance with specified requirements.

2.1.3 PERFORMANCE REQUIREMENTS SUMMARY (PRS). Identifies the key service outputs of the contract that will be evaluated by the Government to assure contract performance standards are met by the contractor.

2.1.4 QUALITY ASSURANCE. Those actions taken by the Government to assure services meet the requirements of the Performance Work Statement (PWS).

2.1.5 CONTRACTING OFFICER’S REPRESENTATIVE (COR). A government person appointed by the contracting officer to help the contracting officer with contract administration and surveillance.

2.1.6 GOVERNMENT INSPECTOR. A government person responsible for surveillance of contractor performance.

2.1.7 QUALITY ASSURANCE SURVEILLANCE PLAN (QASP). An organized written document used for quality assurance surveillance. The document contains specific methods the Government will use to perform surveillance of the contractor.

2.1.8 QUALITY CONTROL. Those actions taken by a contractor to control the performance of services so that they meet the requirements of the PWS.

2.1.9 SPRAY SHEET. Blank field spray sheets that the contractor uses to document location and type of herbicide used on a particular area will be provided by the NNFG. Spray sheets are required to be submitted to the COR/Inspector.

2.1.10 RANDOM SAMPLING. A sampling method in which each service output in a unit has an equal chance of being selected.

2.2 TECHNICAL DEFINITIONS

2.2.1 ACCESS TO TREATMENT AREAS: Access to treatment areas requires travel and treatment operations on or near: paved roads, graveled County roads, and non-graveled two track Forest Service roads. The treatment areas may be along or away from roads and within areas with no developed road access. Access is allowed off designated routes as displayed in the Nebraska National Forest’s Motorized Vehicle Use Map by authorization only issued by the Pine Ridge District Ranger. Your access must be timed such that road or trail surfaces are not subjected to unreasonable resource damage.

2.2.2 AQUATIC AREA: Any type of lake, pond, dam, spring, or stream course that contains an invasive plant species.

2.2.3 BOOM SPRAYER: Spray equipment capable of delivering a minimum of 20 gallons per acre. Boom sprayers shall be equipped with an identifier system to minimize swath overlap such as a ribbon or flagging system. ATV/UTV boom-less nozzles are not considered as boom sprayers.

2.2.4 CLEANUP AND DISPOSAL: Clean up and disposal of excess herbicide and empty containers is the contractor’s responsibility and will be in accordance with the manufacturer’s instructions and applicable to Federal and State Laws.

2.2.5 GIS & GPS SPECIFICATIONS:

Field Survey Operations and Procedures:

Treat and record noxious weed sites in accordance with the Nebraska National Forests and Grassland Noxious Weed User Guide (separate attachment) of this solicitation. The final product submitted is inventory and treatment data in the specific data format of the NNFG Noxious Weeds Geodatabase; this will be submitted to the COR upon completion of treatment. During the contract the contractor is required to submit raw GPS data and accurate field sheets to the COR bi-weekly to ensure that the information is being recorded correctly. The database is an ESRI ArcGIS version 9.3 personal geodatabase.

The database contains the spatial and tabular data. All data elements are required.

Field survey operations using GPS shall be performed using:

1. Trimble GPS unit capable of loading and using NNFG Noxious weed data dictionary (.ddf) files. Concurrent GPS software.

2. Computer with hardware capacity to run ArcGIS software and to convert

GPS data into ArcGIS shapefiles.

3. ArcGIS 9.3 or newer software (ESRI) for aggregating exported GPS files into ArcGIS shapefiles

4. Knowledge and understanding of the requirements of the NNFG Noxious Weed User Guides.

5. Knowledge of GPS and ArcGIS accuracy and standards.

GIS Layer:

1. All weed treatment sites will be combined into one ESRI ArcGIS version

9.3 or newer polygon personal geodatabase. The database contains the spatial and tabular data. Geodatabase will be referenced to the North American Datum, 1983 (NAD83) in the Universal Transverse Mercator (UTM), zone 13 projection will be used. Coordinates will be reported in meters.

2. GPS data will be referenced using the following export coordinate system, units, and velocity:

System UTM Zone 13 North Datum NAD83 (Conus) CORS96 Units Feet Altitude HAE Distance Feet Area Square Feet or Acre Velocity Feet per second

3. Shapefiles will be exported using code values assigned in the Data Dictionary along with the additional attributes:

• PDOP

• Receiver Type

• Correction Status

• Data File Name

Final GPS products submission

• The following digital data is to be electronic: Field/spraying sheets, raw GPS files that have been differentially corrected, and final GIS Geodatabase. Upon completion of an individual treatment area, the contractor shall submit all data within 10 calendar days to the COR or Inspector. If deficiencies are found, all data will be returned for corrections.

2.2.6 MIXING SITE: All mixing and rinsing during the operational period will take place in the field within the treatment areas at a distance no less than 100’ from any stream course, trees, or crops. All mixing and rinsing prior to the start of each season or at the end of the season, shall be prohibited on National Forest. Riseate will be reused as spray solution as much as possible until project completion. Riseate application rates shall not exceed ¾ ounce per acre.

2.2.7 NOXIOUS WEED LIST:

Code Scientific Name Common Name

CIAR4 Cirsium arvense Canada thistle ONAC Onopordum acanthium Scotch thistle EUES Euphorbia esula Leafy Spurge CANU4 Carduus nutans Musk thistle

2.2.8 SPRAY EQUIPMENT: All spray equipment shall be accurately calibrated to ensure herbicide is applied as per manufacturer recommended application rates. Forest Service representative will be present to check calibration prior to starting. All spray equipment would be operated in accordance with owner’s manuals. Weed treatment accomplished by the use of spray equipment installed in trucks, ATVs, or UTVs would follow manufacturer specifications and recommendations, including those specific to weight restrictions.

2.2.9 WEATHER CONDITIONS: Herbicide shall not be applied if temperatures exceed 95 degrees and or the wind speed exceeds 15 mph in all areas excluding aquatic areas.

2.2.10 WEED DATA DICTIONARY: A data dictionary is a list of features and attributes that are collected in the field. It ensures that the collected data is always consistent. In the field, the data dictionary structures and speeds up data collection and allow crews to enter data in the correct format. This ensures data uniformity and integrity, as well as compatibility with the GIS database. The Government provides the data dictionary to the contractor.

SECTION III - GOVERNMENT PUBLICATIONS/INDUSTRY STANDARDS/STATE

STANDARDS/GOVERNMENT STANDARDS/TECHNICAL EXHIBITS

Technical specifications and attachments:

• A tank mixture of Milestone (@ 7oz./acre) and 2, 4-D (@ 1 pt/acre) will be used for the treatment of Thistles.

• Plateau (@10 oz./acre) will be used for the treatment of leafy spurge.

• All spray equipment must be capable of delivering at least 10 gallons per acre.

• Contractor must certify that spray equipment can be accurately calibrated and the products applied at required label rates.

• Contractor shall comply with all federal, state, and local rules, regulations, and laws pertaining to the work required by this contract.

• Contractor will be required to adhere to all aspects of pesticide labels used during treatment.

• Target weed species shall be sprayed at optimal stage of development for herbicidal action to take place. Timing will be consistent with factors such as target species growth stage, product formulation and weather.

• Treatment areas shall be uniformly traversed with spray vehicles. Overlap of spray swaths should be kept to a minimum. Spray vehicles should be equipped with an identifier or an identifier system to insure reduced overlap of spray swaths. Spray will not come in contact with standing water in ponds or drainages. Care will be taken to avoid spray contact with adjacent crop fields, trees, and stock tanks.

• Spraying will cease in the event of rain or wind in excess of 15 miles per hour.

• Mixing and rinsing will take place in the field within treatment areas at a distance greater than 100ft. upstream of standing water, trees or crops. Rinseate will be reused as spray solution as much as possible until project completion. Final leftover rinseate may be applied to treatment areas.

• Contractor shall ensure all equipment moved onto National Forest system land is free of soil, seeds, vegetative matter, or other debris that could contain or hold noxious weed seed. The Forest Service may request inspection of equipment prior to it being placed into service.

• Preparing tank mixes, cleaning spray equipment or disposing of herbicide containers shall not occur at any Forest Service facility.

• All equipment used in treatment will have adequate fire extinguishers and other fire prevention mechanisms.

• Payment for treatment will be based on acres of noxious weeds sprayed. Gpsed acres do not equal areas that have been treated. Discrepancy acres between contractor provided gps files and actual treatment acreage will be evaluated on case by case basis.

All equipment used in treatment will have adequate fire extinguishers and other fire prevention mechanisms.

SECTION IV - PERFORMANCE WORK STATEMENT TASKS AND CRITICAL

SUBTASKS

The following tasks are to be performed to the quality performance requirements shown on the Performance Requirements Summary table in Section V.

4.1 WEED TREATMENT/INVENTORY/DATA: The contractor shall use herbicides according to product labels to spray noxious weeds on the Pine Ridge Ranger District and record treatment areas as follows:

4.1.1 Apply herbicide at optimal stage of plant development to be most effective. For the species being treated, this could require the contractor to return to an area at varying times. The preferred development stage for Canada thistle,Scotch thistle and Hound’s tongue is early spring (rosette) or early summer prior to seed set or early fall.

4.1.2 Record data on each site visited and/or sprayed according to the attached requirements.

On a bi-weekly basis, provide government inspectors with raw GPS files of sites sprayed by the contractor.

4.2 SUBMITTALS: The contractor shall provide the following submittals:

4.2.1 QUALITY CONTROL PLAN (QCP): The contractor shall establish and maintain a complete Quality Control Plan acceptable to the Government to ensure the requirements of the contract are provided as specified. The QCP includes the contractor’s inspection system and the method for identifying and preventing defectives in the quality of service preformed. No work may start until the Contractor’s Quality Control Plan is submitted and accepted by the Government, and the Notice to Proceed is issued.

4.2.2 WORK PLAN: The Work Plan shall describe how the contractor plans to perform the project, including methods, personnel certifications and calibration rates, and list of equipment by make and model. No work may start until the Contractor’s Work Plan is submitted and accepted by the Government and the Notice to Proceed is issued.

4.2.3 DATA SUBMITTAL: The contractor is required to provide copies of all digital data in electronic format; this includes GPS data files, differentially corrected files, final GIS geodatabase in meters and shall use Datum NAD83 Zone 13, UTM projection, spray records, and self-inspection records, within two weeks of completion of the contract. Inaccurate or incomplete data will be returned to the contractor for correction.

SECTION V - PERFORMANCE REQUIREMENTS SUMMARY

TASK/

SUBTASK

PERFORMAN

CE

STANDARD

ACCEPTABL

E QUALITY

LEVEL (AQL)

MONITORING

METHOD

DISINCENTIVES FOR

NOT MEETING

STANDARDS

5.1 - Noxious Weed Inventory/ Treatment Data

Weeds will be treated as per herbicide label directions

Responsible for the effects of herbicide residue on non-target species and any drift.

Equipment will be equipped with anti-siphon devices to prevent contamination of any water supply

Treat at temperatures less than 95 F and wind speeds less than 15 mph

Complete treatment data

90% Acceptable level of performance thus resulting in 90% kill. This will be evaluated using ocular estimates and documented in daily inspection reports.

Less than 20% loss of non-target species

Follow task order direction and manufacturer label direction 100%

Review contractor’s records of treatment, inspection, and sampling results, and perform periodic on-site inspections

Government shall perform our own sampling through a series of ocular inspections

Checking compliance of contractor supplied inspection plots

Field check fill site

Rework at contractors expense

Payment will be deducted in accordance with G.5 Payments.

Poor performance rating table according to required standards as defined in Section 2.2.5 and on a regular basis, provide Government Inspectors with GPS data of treated sites

4.2 - Submittals

4.2.1 - Quality Control Plan

(QCP)

4.2.2 - Work Plan

4.2.3 - Schedule of Work

4.2.3 – Data Submittals

All submittals are received within 10 days after contract award

QCP includes contractor’s inspection system and the method for identifying and preventing defectives in the quality of service preformed.

Includes method and frequency of inspections

On-site records of all quality control inspections are submitted weekly

Contractor will submit GPS/GIS data as outlined in 2.2.5 above.

100% Compliance

Submittal review Will not issue Notice to Proceed until submittals are received and accepted by the Government.

INSPECTION AND ACCEPTANCE

E.2 CONTRACTOR SELF INSPECTION:

A. The contractor shall conduct self-inspections (QCP) on all aspects of work, collection of data, mapping, and data submittal. The field inspections shall be spread throughout the project area. For all submitted data, the contractor shall provide the Government with an acceptable method of self-inspection. This method shall be accepted and approved by the Government prior to the Notice to Proceed being issued.

At no time shall the contractor rely upon Government inspections to provide notification of unsatisfactory performance. The Contracting Officer may observe the Contractor's inspection at any time and shall otherwise have unlimited access to the inspection data.

The self-inspection process for treated areas shall be documented and submitted on a weekly basis after the Notice to Proceed occurs, and be representative of a treatment area.

The QCP shall specify:

1. How quality will be monitored to assure performance standards are met.

2. How the work will be supervised.

3. How results of the monitoring will result in quality performance.

4. Identify the personnel responsible for performing quality control.

B. Contractor Quality Control Inspection. The Contractor shall assure themselves that performance meets contract specifications, in accordance with clause FAR 52.212-4, Contract Terms and Conditions – Commercial Items, paragraph (a), Inspection/Acceptance prior to requesting the Government to inspect for payment or acceptance.

During the contract the contractor is required to submit raw GPS data and field sheets to the COR bi-weekly to ensure that the information is being recorded correctly.

E.3 GOVERNMENT INSPECTION AND ACCEPTANCE:

A. Government Quality Assurance Inspection. The Government will, at its convenience, make periodic inspections of the work to assure itself of contract compliance and to perform Quality Assurance Inspections to determine confirm that the Contractor is performing quality control in accordance with its QCP and that Contractor monitoring results in quality performance of contract objectives.

The Government will assure quality is being met through plots and visual inspections as stated in Section VII - PRS. Inspections will determine both the adequacy of coverage and rate of detection of weed occurrences. A determination of acceptance will be based on discoloration, wilt, and presence of dye on plants meeting the AQL.

B. Acceptance. Acceptance of the work under the contract will be made after Government inspection and the Contracting Officer has made the determination of satisfactory compliance with the specifications. All required contract specifications shall be satisfactorily completed in each unit before acceptance will be made. Acceptance will not be made for segments broken by unacceptable portions of work.

C. Rework and Re-inspection after Rework. If the contractor fails to meet the minimum AQL, the contractor shall rework the area and geodatabase. The Government will conduct an inspection and up to one re-inspection for each area.

When inspections indicates that the performance objectives were not met, the work will be deemed unsatisfactory and payment will not be made until the Contractor has assured the Government that its Quality Control measures have corrected the deficiencies. Inspections after rework will be made in the same manner as the first inspection.

PAYMENT

Payment at contract price will be made on a per acre cost less any deductions or adjustments as provided in the PWS.

Work meeting at least 90 percent AQL will receive 100 percent payment. Falling below 90 percent to 80 percent AQL will receive the same percentage of the amount due for payment. Falling below 80percent AQL will result in 90 percent of the actual AQL for that unit.

NOTIFICATION OF SUBCONTRACTING

The Contractor shall promptly notify the Contracting Officer upon entering into any subcontract arrangement. The subcontractor shall have the experience and be equipped for such work. The written notification shall include as a minimum:

A. The name, address and telephone number of the subcontractor.

B. The date upon which the subcontract was entered into and its duration.

C. A detailed description of the work being subcontracted including a listing of contract items, units, etc., as appropriate.

D. Documentation of the subcontractor's representative authority.

Subcontracting any portion of the contract shall not relieve the Prime Contractor of any responsibility under this contract. Any subcontract agreement shall contain all terms and conditions of the prime contract.

NOTICE TO PROCEED

A Notice to Proceed will be issued in writing by the Contracting Officer. No work shall begin until receipt of this notice. Supplies should not be purchased prior to the Notice to Proceed or the Contractor will not be reimbursed in the case of a Termination of the contract. Contract time shall commence on the day indicated on the Notice to Proceed.

Fire Prevention –

The Contractor shall immediately notify the Government of any fires sighted on or in the vicinity of the work site. The Contractor may be held liable for all damages and for all costs incurred by the Government for labor, subsistence, equipment, supplies, and transportation deemed necessary to control or suppress a fire set or caused by the Contractor or the Contractor’s agents or employees.

WASHING EQUIPMENT

In order to prevent the spread of noxious weeds into the contract area, contractor shall be required to clean all off-road equipment prior to equipment being moved to the project site on National Forest lands. This cleaning shall remove all visible soil, plant parts, seeds, vegetative matter, or other debris that could contain or hold seeds. Only equipment cleaned and inspected by the Forest Service will be allowed to operate within the contract area. All subsequent move-ins of equipment to the contract area shall be treated in the same manner as the initial move in.

"Off-road equipment" includes all logging and construction machinery, except for log trucks, chip vans, service vehicles, water trucks, pickup trucks, cars, and similar vehicles.

Contractor shall employ whatever cleaning methods are necessary to ensure that off-road equipment is free of noxious weeds. Equipment shall be considered free of soil, seed, and other such debris when a visual inspection does not disclose such material. Disassembly of equipment components or specialized inspection tools is not required.

Unless otherwise agreed, contractor shall give the Forest Service at least 24 hours’ notice when equipment is ready for inspection. Notification will include an agreed upon location where the equipment will be available for inspection by the Forest Service.

New infestations of noxious weeds are a concern to the Forest Service and shall be identified by either contractor or Forest Service, within the contract area and shall be promptly reported to the other party. Contractor and Forest Service shall agree on necessary steps to reduce or stop the spread of noxious weeds when new infestations are found. A current list, along with photos, of noxious weeds of concern to Forest Service is available at each Forest Service office.

SECTION C - CONTRACT CLAUSES

FAR 52.252-2 Clauses Incorporated by Reference (FEB 1998)

This contract incorporates one or more clauses by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. Also, the full text of a clause may be accessed electronically at this/these address(es):

Federal Acquisition Regulation (FAR): https://www.acquisition.gov/browse/index/far (Clauses are located at FAR part 52 and begin with 52)

Department of Agriculture Acquisition Regulation (AGAR):https://www.acquisition.gov/agar (Clauses are located at AGAR part 452 and begin with 452)

Deviations to clauses may be viewed at: Policies & Regulations | USDA

Clauses Incorporated by Reference

FAR 52.204-13

FAR 52.204-18

FAR 52.237-2

FAR 52.242-17

FAR 52.245-1

FAR 52.245-9

System for Award Management Maintenance (OCT 2018) Commercial and Government Entity Code Maintenance (AUG 2020) Protection of Government Buildings, Equipment, and Vegetation (APR 1984) Government Delay of Work (APR 1984) Government Property (SEP 2021) Alt 1 (APR 2012) Use and Charges (APR 2012)

AGAR 452.204-70 Modification for Contract Closeout (DEVIATION JUN 2024) AGAR 452.236-73 Archaeological or Historic Sites (FEB 1988) AGAR 452.236-74 Control of Erosion, Sedimentation, and Pollution (NOV 1996)

Clauses Incorporated by Full Text

FAR 52.212-4 Contract Terms and Conditions – Commercial Products and Commercial Services (NOV 2023)

FAR 52.212-5 Contract Terms and Conditions Required to Implement Statutes or Executive Orders – Commercial Products and Commercial Services (MAY 2024)

(a) The Contractor shall comply with the following Federal Acquisition Regulation (FAR) clauses, which are incorporated in this contract by reference, to implement provisions of law or Executive orders applicable to acquisitions of commercial products and commercial services:

(1) FAR 52.203-19, Prohibition on Requiring Certain Internal Confidentiality Agreements or Statements (JAN 2017) (section 743 of Division E, Title VII, of the Consolidated and Further Continuing Appropriations Act, 2015 (Pub. L. 113-235) and its successor provisions in subsequent appropriations acts (and as extended in continuing resolutions)).

https://www.acquisition.gov/browse/index/far https://www.acquisition.gov/far/part-52 https://www.acquisition.gov/agar https://www.acquisition.gov/agar/part-452-solicitation-provisions-and-contract-clauses https://www.usda.gov/da/ocp/ppd/policies-regulations https://www.usda.gov/sites/default/files/documents/agar-class-deviation-contract-closeout-clause.pdf https://www.acquisition.gov/far/52.203-19#FAR_52_203_19

(2) FAR 52.204-23, Prohibition on Contracting for Hardware, Software, and Services Developed or Provided by Kaspersky Lab Covered Entities (DEC 2023) (Section 1634 of Pub. L. 115-91).

(3) FAR 52.204-25, Prohibition on Contracting for Certain Telecommunications and Video Surveillance Services or Equipment. (NOV 2021) (Section 889(a)(1)(A) of Pub. L. 115- 232).

(4) FAR 52.209-10, Prohibition on Contracting with Inverted Domestic Corporations (NOV 2015).

(5) FAR 52.232-40, Providing Accelerated Payments to Small Business Subcontractors (MAR 2023) (31 U.S.C. 3903 and 10 U.S.C. 3801).

(6) FAR 52.233-3, Protest After Award (AUG 1996) (31 U.S.C. 3553).

(7) FAR 52.233-4, Applicable Law for Breach of Contract Claim (OCT 2004) (Public Laws 108-77 and 108-78 (19 U.S.C. 3805 note)).

(b) The Contractor shall comply with the FAR clauses in this paragraph (b) that the Contracting Officer has indicated as being incorporated in this contract by reference to implement provisions of law or Executive orders applicable to acquisitions of commercial products and commercial services:

[Contracting Officer check as appropriate.]

☐ (1) FAR 52.203-6, Restrictions on Subcontractor Sales to the Government (JUN 2020), with Alternate I (NOV 2021) (41 U.S.C. 4704 and 10 U.S.C. 4655).

☐ (2) FAR 52.203-13, Contractor Code of Business Ethics and Conduct (NOV 2021) (41 U.S.C. 3509)).

☐ (3) FAR 52.203-15, Whistleblower Protections under the American Recovery and Reinvestment Act of 2009 (Jun 2010) (Section 1553 of Pub. L. 111-5). (Applies to contracts funded by the American Recovery and Reinvestment Act of 2009.)

☒ (4) FAR 52.203-17, Contractor Employee Whistleblower Rights (NOV 2023) (41 U.S.C.

4712); this clause does not apply to contracts of DoD, NASA, the Coast Guard, or applicable elements of the intelligence community—see FAR 3.900(a).

☒ (5) FAR 52.204-10, Reporting Executive Compensation and First-Tier Subcontract Awards (Jun 2020) (Pub. L. 109-282) (31 U.S.C. 6101 note).

☐ (6) [Reserved].

☐ (7) FAR 52.204-14, Service Contract Reporting Requirements (OCT 2016) (Pub. L. 111-

117, section 743 of Div. C).

☐ (8) FAR 52.204-15, Service Contract Reporting Requirements for Indefinite-Delivery

Contracts (OCT 2016) (Pub. L. 111-117, section 743 of Div. C).

☒ (9) FAR 52.204-27, Prohibition on a ByteDance Covered Application (JUN 2023) (Section

102 of Division R of Pub. L. 117-328).

☐ (10) FAR 52.204-28, Federal Acquisition Supply Chain Security Act Orders—Federal

Supply Schedules, Governmentwide Acquisition Contracts, and Multi-Agency Contracts.

(Dec 2023) (Pub. L. 115–390, title II) https://www.acquisition.gov/far/52.204-23#FAR_52_204_23 https://www.acquisition.gov/far/52.204-25#FAR_52_204_25 https://www.acquisition.gov/far/52.209-10#FAR_52_209_10 https://www.acquisition.gov/far/52.232-40#FAR_52_232_40 https://www.govinfo.gov/link/uscode/31/3903 https://www.govinfo.gov/link/uscode/10/3801 https://www.acquisition.gov/far/52.233-3#FAR_52_233_3 http://uscode.house.gov/browse.xhtml;jsessionid=114A3287C7B3359E597506A31FC855B3 https://www.acquisition.gov/far/52.233-4#FAR_52_233_4 http://uscode.house.gov/browse.xhtml;jsessionid=114A3287C7B3359E597506A31FC855B3 https://www.acquisition.gov/far/52.203-6#FAR_52_203_6 http://uscode.house.gov/browse.xhtml;jsessionid=114A3287C7B3359E597506A31FC855B3 https://www.govinfo.gov/link/uscode/10/4655 https://www.acquisition.gov/far/52.203-13#FAR_52_203_13 http://uscode.house.gov/browse.xhtml;jsessionid=114A3287C7B3359E597506A31FC855B3 http://uscode.house.gov/browse.xhtml;jsessionid=114A3287C7B3359E597506A31FC855B3 https://www.acquisition.gov/far/52.203-15#FAR_52_203_15 https://www.acquisition.gov/far/52.203-17#FAR_52_203_17 https://www.govinfo.gov/link/uscode/41/4712 https://www.govinfo.gov/link/uscode/41/4712 https://www.acquisition.gov/far/3.900#FAR_3_900 https://www.acquisition.gov/far/52.204-10#FAR_52_204_10 http://uscode.house.gov/view.xhtml?req=granuleid:USC-prelim-title31-section6101&num=0&edition=prelim https://www.acquisition.gov/far/52.204-14#FAR_52_204_14 https://www.acquisition.gov/far/52.204-15#FAR_52_204_15 https://www.acquisition.gov/far/52.204-27#FAR_52_204_27 https://www.acquisition.gov/far/52.204-28#FAR_52_204_28 https://www.govinfo.gov/link/plaw/115/public/390

☐ (11)(i) FAR 52.204-30, Federal Acquisition Supply Chain Security Act Orders— Prohibition (Dec 2023) (Pub. L. 115–390, title II)

☐ (ii) Alternate I (Dec 2023) of FAR 52.204-30.

☒ (12) FAR 52.209-6, Protecting the Government’s Interest When Subcontracting with

Contractors Debarred, Suspended, or Proposed for Debarment. (NOV 2021) (31 U.S.C.

6101 note).

☐ (13) FAR 52.209-9, Updates of Publicly Available Information Regarding Responsibility Matters (OCT 2018) (41 U.S.C. 2313).Updates of Publicly Available Information Regarding Responsibility Matters (Oct 2018) (41 U.S.C. 2313).

☐ (14) [Reserved].

☐ (15) FAR 52.219-3, Notice of HUBZone Set-Aside or Sole-Source Award (OCT 2022) (15

U.S.C. 657a).

☐ (16) FAR 52.219-4, Notice of Price Evaluation Preference for HUBZone Small Business

Concerns (OCT 2022) (if the offeror elects to waive the preference, it shall so indicate in its offer) (15 U.S.C. 657a).

☐ (17) [Reserved] ☐ (18) (i) FAR 52.219-6, Notice of Total Small Business Set-Aside (NOV 2020) (15 U.S.C.

644).

☐ (ii) Alternate I (Mar 2020) of FAR 52.219-6.

☐ (19) (i) FAR 52.219-7, Notice of Partial Small Business Set-Aside (NOV 2020) (15 U.S.C.

644).

☐ (ii) Alternate I (Mar 2020) of FAR 52.219-7.

☐ (20) FAR 52.219-8, Utilization of Small Business Concerns (FEB 2024) (15 U.S.C.

637(d)(2) and (3)).

☐ (21) (i) FAR 52.219-9, Small Business Subcontracting Plan (SEP 2023) (15 U.S.C. 637(d)(4)).

☐ (ii) Alternate I (Nov 2016) of FAR 52.219-9.

☐ (iii) Alternate II (Nov 2016) of FAR 52.219-9.

☐ (iv) Alternate III (Jun 2020) of FAR 52.219-9.

☐ (v) Alternate IV (Sep 2023) of FAR 52.219-9.

☐ (22) (i) FAR 52.219-13, Notice of Set-Aside of Orders (MAR 2020) (15 U.S.C. 644(r)).

☐ (ii) Alternate I (MAR 2020) of FAR 52.219-13.

☐ (23) FAR 52.219-14, Limitations on Subcontracting (OCT 2022) (15 U.S.C. 637s).

[Contracting Officer check as appropriate.] ☐ By the end of the base term of the contract and then by the end of each subsequent option period; or

☐ By the end of the performance period for each order issued under the contract.

☐ (24) FAR 52.219-16, Liquidated Damages—Subcontracting Plan (SEP 2021) (15 U.S.C.

637(d)(4)(F)(i)).

https://www.acquisition.gov/far/52.204-30#FAR_52_204_30 https://www.govinfo.gov/link/plaw/115/public/390 https://www.acquisition.gov/far/52.204-30#FAR_52_204_30 https://www.acquisition.gov/far/52.209-6#FAR_52_209_6 http://uscode.house.gov/view.xhtml?req=granuleid:USC-prelim-title31-section6101&num=0&edition=prelim http://uscode.house.gov/view.xhtml?req=granuleid:USC-prelim-title31-section6101&num=0&edition=prelim https://www.acquisition.gov/far/52.209-9#FAR_52_209_9 http://uscode.house.gov/view.xhtml?req=granuleid:USC-prelim-title41-section2313&num=0&edition=prelim https://www.acquisition.gov/far/52.219-3#FAR_52_219_3 http://uscode.house.gov/view.xhtml?req=granuleid:USC-prelim-title15-section637a&num=0&edition=prelim http://uscode.house.gov/view.xhtml?req=granuleid:USC-prelim-title15-section637a&num=0&edition=prelim https://www.acquisition.gov/far/52.219-4#FAR_52_219_4 http://uscode.house.gov/browse.xhtml;jsessionid=114A3287C7B3359E597506A31FC855B3 https://www.acquisition.gov/far/52.219-6#FAR_52_219_6 http://uscode.house.gov/browse.xhtml;jsessionid=114A3287C7B3359E597506A31FC855B3 http://uscode.house.gov/browse.xhtml;jsessionid=114A3287C7B3359E597506A31FC855B3 https://www.acquisition.gov/far/52.219-6#FAR_52_219_6 https://www.acquisition.gov/far/52.219-7#FAR_52_219_7 http://uscode.house.gov/browse.xhtml;jsessionid=114A3287C7B3359E597506A31FC855B3 http://uscode.house.gov/browse.xhtml;jsessionid=114A3287C7B3359E597506A31FC855B3 https://www.acquisition.gov/far/52.219-7#FAR_52_219_7 https://www.acquisition.gov/far/52.219-8#FAR_52_219_8 http://uscode.house.gov/browse.xhtml;jsessionid=114A3287C7B3359E597506A31FC855B3 http://uscode.house.gov/browse.xhtml;jsessionid=114A3287C7B3359E597506A31FC855B3 https://www.acquisition.gov/far/52.219-9#FAR_52_219_9 http://uscode.house.gov/browse.xhtml;jsessionid=114A3287C7B3359E597506A31FC855B3 https://www.acquisition.gov/far/52.219-9#FAR_52_219_9 https://www.acquisition.gov/far/52.219-9#FAR_52_219_9 https://www.acquisition.gov/far/52.219-9#FAR_52_219_9 https://www.acquisition.gov/far/52.219-9#FAR_52_219_9 https://www.acquisition.gov/far/52.219-13#FAR_52_219_13 http://uscode.house.gov/browse.xhtml;jsessionid=114A3287C7B3359E597506A31FC855B3 https://www.acquisition.gov/far/52.219-13#FAR_52_219_13 https://www.acquisition.gov/far/52.219-14#FAR_52_219_14 http://uscode.house.gov/browse.xhtml;jsessionid=114A3287C7B3359E597506A31FC855B3 https://www.acquisition.gov/far/52.219-16#FAR_52_219_16 http://uscode.house.gov/browse.xhtml;jsessionid=114A3287C7B3359E597506A31FC855B3

☐ (25) FAR 52.219-27, Notice of Set-Aside for, or Sole-Source Award to, Service-Disabled Veteran-Owned Small Business (SDVOSB) Concerns Eligible Under the SDVOSB Program (FEB 2024) (15 U.S.C. 657f).

☒ (26) (i) FAR 52.219-28, Post Award Small Business Program Rerepresentation (FEB 2024) (15 U.S.C. 632(a)(2)).

☐ (ii) Alternate I (MAR 2020) of FAR 52.219-28.

☐ (27) FAR 52.219-29, Notice of Set-Aside for, or Sole-Source Award to, Economically Disadvantaged Women-Owned Small Business Concerns (OCT 2022) (15 U.S.C. 637(m)).

☐ (28) FAR 52.219-30, Notice of Set-Aside for, or Sole-Source Award to, Women-Owned Small Business Concerns Eligible Under the Women-Owned Small Business Program (OCT 2022) (15 U.S.C. 637(m).

☐ (29) FAR 52.219-32, Orders Issued Directly Under Small Business Reserves (MAR 2020) (15 U.S.C. 644(r)).

☐ (30) FAR 52.219-33, Nonmanufacturer Rule (SEP 2021) (15U.S.C. 637(a)(17)).

☒ (31) FAR 52.222-3, Convict Labor (JUN 2003) (E.O.11755).

☐ (32) FAR 52.222-19, Child Labor-Cooperation with Authorities and Remedies (FEB

2024).[ ☒ (33) FAR 52.222-21, Prohibition of Segregated Facilities (APR 2015).

☒ (34) (i) FAR 52.222-26, Equal Opportunity (SEP 2016) (E.O.11246).

☐ (ii) Alternate I (FEB 1999) of FAR 52.222-26.

☐ (35) (i) FAR 52.222-35, Equal Opportunity for Veterans (JUN 2020) (38 U.S.C. 4212).

☐ (ii) Alternate I (JUL 2014) of FAR 52.222-35.

☒ (36) (i) FAR 52.222-36, Equal Opportunity for Workers with Disabilities (JUN

2020) (29 U.S.C. 793).

☐ (ii) Alternate I (Jul 2014) of FAR 52.222-36.

☐ (37) FAR 52.222-37, Employment Reports on Veterans (JUN 2020) (38 U.S.C. 4212).

☐ (38) FAR 52.222-40, Notification of Employee Rights Under the National Labor Relations

Act (Dec 2010) (E.O. 13496).

☒ (39) (i) FAR 52.222-50, Combating Trafficking in Persons (NOV 2021) (22 U.S.C. chapter

78 and E.O. 13627).

☐ (ii) Alternate I (Mar 2015) of 52.222-50 ( 22 U.S.C. chapter 78 and E.O. 13627).

☐ (40) FAR 52.222-54, Employment Eligibility Verification (MAY 2022) (Executive Order 12989). (Not applicable to the acquisition of commercially available off-the-shelf items or certain other types of commercial products or commercial services as prescribed in FAR 22.1803.)

☐ (41) (i) FAR 52.223-9, Estimate of Percentage of Recovered Material Content for EPA– Designated Items (May 2008) (42 U.S.C. 6962(c)(3)(A)(ii)). (Not applicable to the acquisition of commercially available off-the-shelf items.)

☐ (ii) Alternate I (MAY 2008) of FAR 52.223-9 (42 U.S.C. 6962(i)(2)(C)). (Not applicable to the acquisition of commercially available off-the-shelf items.)

☐ (42) FAR 52.223-11, Ozone-Depleting Substances and High Global Warming Potential Hydrofluorocarbons (MAY 2024) (42 U.S.C. 7671, et seq.).

https://www.acquisition.gov/far/52.219-27#FAR_52_219_27 http://uscode.house.gov/browse.xhtml;jsessionid=114A3287C7B3359E597506A31FC855B3 https://www.acquisition.gov/far/52.219-28#FAR_52_219_28 http://uscode.house.gov/browse.xhtml;jsessionid=114A3287C7B3359E597506A31FC855B3 https://www.acquisition.gov/far/52.219-28#FAR_52_219_28 https://www.acquisition.gov/far/52.219-29#FAR_52_219_29 http://uscode.house.gov/browse.xhtml;jsessionid=114A3287C7B3359E597506A31FC855B3 https://www.acquisition.gov/far/52.219-30#FAR_52_219_30 http://uscode.house.gov/browse.xhtml;jsessionid=114A3287C7B3359E597506A31FC855B3 https://www.acquisition.gov/far/52.219-32#FAR_52_219_32 https://www.govinfo.gov/content/pkg/USCODE-2018-title15/html/USCODE-2018-title15-chap14A-sec644.htm https://www.acquisition.gov/far/52.219-33#FAR_52_219_33 https://www.govinfo.gov/content/pkg/USCODE-2018-title15/html/USCODE-2018-title15-chap14A-sec637.htm https://www.acquisition.gov/far/52.222-3#FAR_52_222_3 https://www.acquisition.gov/far/52.222-19#FAR_52_222_19 https://www.usda.gov/sites/default/files/documents/far-class-deviation-regarding-new-trade-agreements-thresholds.pdf https://www.acquisition.gov/far/52.222-21#FAR_52_222_21 https://www.acquisition.gov/far/52.222-26#FAR_52_222_26 https://www.acquisition.gov/far/52.222-26#FAR_52_222_26 https://www.acquisition.gov/far/52.222-35#FAR_52_222_35 http://uscode.house.gov/view.xhtml?req=granuleid:USC-prelim-title38-section4212&num=0&edition=prelim https://www.acquisition.gov/far/52.222-35#FAR_52_222_35 https://www.acquisition.gov/far/52.222-36#FAR_52_222_36 http://uscode.house.gov/view.xhtml?req=granuleid:USC-prelim-title29-section793&num=0&edition=prelim https://www.acquisition.gov/far/52.222-36#FAR_52_222_36 https://www.acquisition.gov/far/52.222-37#FAR_52_222_37 http://uscode.house.gov/view.xhtml?req=granuleid:USC-prelim-title38-section4212&num=0&edition=prelim https://www.acquisition.gov/far/52.222-40#FAR_52_222_40 https://www.acquisition.gov/far/52.222-50#FAR_52_222_50 http://uscode.house.gov/browse.xhtml;jsessionid=114A3287C7B3359E597506A31FC855B3 http://uscode.house.gov/browse.xhtml;jsessionid=114A3287C7B3359E597506A31FC855B3 https://www.acquisition.gov/far/52.222-50#FAR_52_222_50 http://uscode.house.gov/browse.xhtml;jsessionid=114A3287C7B3359E597506A31FC855B3 https://www.acquisition.gov/far/52.222-54#FAR_52_222_54 https://www.acquisition.gov/far/22.1803#FAR_22_1803 https://www.acquisition.gov/far/22.1803#FAR_22_1803 https://www.acquisition.gov/far/52.223-9#FAR_52_223_9 http://uscode.house.gov/browse.xhtml;jsessionid=114A3287C7B3359E597506A31FC855B3 https://www.acquisition.gov/far/52.223-9#FAR_52_223_9 http://uscode.house.gov/browse.xhtml;jsessionid=114A3287C7B3359E597506A31FC855B3 https://www.acquisition.gov/far/52.223-11#FAR_52_223_11 https://www.govinfo.gov/link/uscode/42/7671

☐ (43) FAR 52.223-12, Maintenance, Service, Repair, or Disposal of Refrigeration Equipment and Air Conditioners (MAY 2024) (42 U.S.C. 7671, et seq.).

☐ (44) FAR 52.223-20, Aerosols (MAY 2024) (42 U.S.C. 7671, et seq.).

☐ (45) FAR 52.223-21, Foams (MAY 2024) (42 U.S.C. 7671, et seq.).

☐ (46) FAR 52.223-23, Sustainable Products and Services (MAY 2024) (E.O. 14057, 7

U.S.C. 8102, 42 U.S.C. 6962, 42 U.S.C. 8259b, and 42 U.S.C. 7671l).

☐ (47) (i) FAR 52.224-3 Privacy Training (JAN 2017) (5 U.S.C. 552 a).

☐ (ii) Alternate I (Jan 2017) of FAR 52.224-3.

☒ (48) (i) FAR 52.225-1, Buy American-Supplies (OCT 2022) (41 U.S.C. chapter 83).

☐ (ii) Alternate I (Oct 2022) of 52.225-1 ☐ (49) (i) FAR 52.225-3, Buy American-Free Trade Agreements-Israeli Trade Act (NOV

2023) (19 U.S.C. 3301 note, 19 U.S.C. 2112 note, 19 U.S.C. 3805 note, 19 U.S.C. 4001 note, 19 U.S.C. chapter 29 (sections 4501-4732), Public Law 103-182, 108-77, 108-78, 108-286, 108-302, 109-53, 109-169, 109-283, 110-138, 112-41, 112-42, and 112-43.

☐(ii) Alternate I [Reserved] ☐(iii) Alternate II (DEC 2022) of FAR 52.225-3.

☐(iv) Alternate III (FEB 2024) of FAR 52.225-3.

☐(v) Alternate IV (OCT 2022) of FAR 52.225-3.

☐ (50) FAR 52.225-5, Trade Agreements (NOV 2023) (19 U.S.C. 2501, et seq., 19 U.S.C.

3301 note).

☒ (51) FAR 52.225-13, Restrictions on Certain Foreign Purchases (FEB 2021) (E.O.’s, proclamations, and statutes administered by the Office of Foreign Assets Control of the Department of the Treasury).

☐ (52) FAR 52.225-26, Contractors Performing Private Security Functions Outside the United States (Oct 2016) (Section 862, as amended, of the National Defense Authorization Act for Fiscal Year 2008; 10 U.S.C. Subtitle A, Part V, Subpart G Note).

☐ (53) FAR 52.226-4, Notice of Disaster or Emergency Area Set-Aside (Nov 2007) (42 U.S.C. 5150).

☐ (54) FAR 52.226-5, Restrictions on Subcontracting Outside Disaster or Emergency Area

(NOV 2007) (42 U.S.C. 5150).

☒ (55) FAR 52.226-8, Encouraging Contractor Policies to Ban Text Messaging While…