1240BG26Q0014 Attachment 02 - Exhibits.pdf

Contents

EXHIBIT A: INSPECTION QUALITY FORM

EXHIBIT B: FIELD INSTRUCTIONS FOR THE ANNUAL INVENTORY OF CALIFORNIA, OREGON,

AND WASHINGTON, And SPECIAL STUDY FIELD INSTRUCTIONS

EXHIBIT C: NONDISCLOSURE AGREEMENT

EXHIBIT D: PLOT LIST

EXHIBIT E: PLOT VICINITY MAPS

EXHIBIT F: HARDWARE, SOFTWARE, AND DATA PROCESSING PROCEDURES

EXHIBIT G: LANDOWNER CONTACT

EXHIBIT H: ELECTRONIC PLOT FILES

EPF, File Descriptions

Historical Reference Files

Current Survey Files

Examples of Prefield Folder Contents

EXHIBIT I: ELECTRONIC PLOT FOLDER INSPECTION FORM

EHIBIT J: ELECTRONIC PLOT FOLDER INSTRUCTIONS

Installing Box Drive

General EPF Process

Detailed EPF Process

PLOT PACKAGER INSTRUCTIONS FOR LOADING PLOT DATA AND EPF FILES

LOADING PACKAGED PLOTS INTO MIDAS

SUMMARY OF ELECTRONIC PLOT FOLDER FILE NAMES AND FOLDER LOCATIONS

PRODUCTION PLOTS (PLOT STATUS = 1 OR 2)

NONSAMPLED PLOTS (PLOT STATUS = 3)

EXHIBIT K: SURVEY GRADE GNSS INSTRUCTIONS

EXHIBIT L: FORMS AND GUIDES

EXHIBIT M: SAFETY PLAN

EXHIBIT A: INSPECTION QUALITY FORM

EXHIBIT B: FIELD INSTRUCTIONS FOR THE ANNUAL INVENTORY OF

CALIFORNIA, OREGON, AND WASHINGTON, And SPECIAL STUDY

FIELD INSTRUCTIONS.

The newest Final version of EXHIBIT B in its entirety, will be distributed to all Offerors via email. Hard copies will be provided after award if requested. Any changes in the annual “Field Instructions” are summarized in Appendices of the “Field Instructions”. Digital copies can be found here: Forest Monitoring and Assessment | US Forest Service Research and Development (usda.gov) https://www.fs.usda.gov/research/pnw/programs/fma#field-manuals https://www.fs.usda.gov/research/pnw/programs/fma#field-manuals

EXHIBIT C: NONDISCLOSURE AGREEMENT

Exhibit C will be included as an attachment with the solicitation.

EXHIBIT D: PLOT LIST

*Critical plots must be completed by September 15, 2026

STATE CTY

PUBLIC

ID LAT_FUZZ LON_FUZZ TOWN RGE SECT RESERVE_NAME OWNER ELEV RDDIST CRITICAL

41 15 82908 42.706106

123.778584 33S 09W 09 BLM 1585 7 Remote

41 29 87214 42.148631

122.983651 39S 02W 30 BLM 2592 5

41 33 63934 42.247132

123.321197 38S 05W 20 BLM 2953 5

41 33 65386 42.132787

123.495417 39S 07W 35 BLM 3166 2

41 33 79853 42.55248

123.727279 35S 09W 02 BLM 3514 2

41 11 76759 43.379365

124.049008 25S 11W 30 Corporate 466 5

41 15 94816 42.558126

124.204943 35S 13W 12 Corporate 2402 1

41 19 59362 43.043392

123.639152 29S 08W 15 Corporate 1821 3

41 19 66045 43.252741

123.685232 27S 08W 05 Corporate 2208 2

41 19 72760 43.428555

123.712307 25S 09W 01 Corporate 1421 3

41 19 78789 43.089221 -123.63867 28S 08W 34 Corporate 1404 4

41 19 91821 42.890493

123.789264 31S 09W 08 Corporate 2575 3

41 15 62106 42.253825

123.823757 38S 10W 24

Kalmiopsis National Wilderness

Siskiyou NF 2992 7 Wilderness

41 15 64739 42.597579

123.897786 34S 10W 20

Siskiyou

NF 3159 6

41 15 80770 42.400006

124.161682 37S 12W 06

Siskiyou

NF 3369 5

41 15 83686 42.058207

123.959317 40S 11W 26

Kalmiopsis National Wilderness

Siskiyou

NF 1903

Wilderness

/ SK1

41 15 95812 42.690894

124.230628 33S 13W 27

Siskiyou

NF 2028 5

41 15 99246 42.206484

123.957583 39S 11W 02

Kalmiopsis National Wilderness

Siskiyou NF 2674 7 Wilderness

41 33 59918 42.433059

123.861454 36S 10W 22

Siskiyou NF 2438 8 Remote

41 33 61435 42.453966 -123.89955 36S 10W 08 Siskiyou

NF 2044 SK1

41 33 63371 42.504146 -123.77129 35S 09W 28 Siskiyou

NF 2930 SK1

41 33 82124 42.106267

123.825934 40S 10W 12

Siskiyou NF 3068 9 Remote

41 19 51932 43.683152

123.915065 22S 10W 05

Siuslaw NF 833 7 Remote

41 19 58817 43.825729

123.987805 20S 11W 14

Siuslaw

NF 390 6

41 39 69019 44.058514

123.821157 17S 09W 31

Siuslaw

NF 768 5

41 41 55871 44.519643 -123.78414 12S 09W 21 Siuslaw

NF 814 6

41 41 68024 44.522758

123.931702 12S 10W 17

Siuslaw

NF 646 5

41 41 93593 44.372312

123.926153 14S 10W 08

Siuslaw

NF 118 2

41 11 83725 43.534895

124.043642 23S 11W 31 State 823 5

41 39 78950 44.014661

123.778133 18S 09W 09 State 591 6

EXHIBIT E: PLOT VICINITY MAPS

EXHIBIT F: HARDWARE, SOFTWARE, AND DATA PROCESSING

PROCEDURES

PERSONAL DATA RECORDER:

The Contractor shall provide a Personal Data Recorder (PDR) meeting the following specifications:

• Juniper Systems Allegro 2 minimum of 128MB RAM/8GB flash storage.

• Trimble Ranger 7

• These PDRs are required as data collection software was designed to run on these specific machines. Other makes or models may not perform as intended.

• It is anticipated over the life of this contract some changes in data editing software may be made. As such changes are required, The Contractor will be notified by The Government.

PERSONAL COMPUTER/LAPTOP:

The Contractor shall provide a personal computer with the following specifications and software:

• Microsoft Windows 10 operating system

• Microsoft .Net 4.0 Framework SP 1

• Java Version 8 Update 121 or later

• Microsoft Office 2013 (32-bit only)

• Adobe Reader 2015.023.20053 or later

• Mac products are incompatible with the software required and cannot be used.

Installation programs for MIDAS supporting software will be distributed via the MIDAS website https://apps.fs.usda.gov/fia/midas-access/main (subject to change). Updates to the system will be distributed through the Midas website with a username and password login for each contractor. The website will be used to retrieve plot files and to submit completed plots. Contractor shall have an internet connection available to their crews.

SUBMETER GNSS:

The Contractor provided survey grade GNSS (Global Navigation Satellite System) unit(s) shall have the following specifications:

• Be a Javad brand unit with the ability to collect both L1 and L2 frequencies and both GPS and GLONASS satellite constellation data.

• GNSS units that currently (with manufactures continued support) fulfil these requirements depending on the options that are purchased include the Javad Triumph-2 (L2+GLONASS).

DATA PROCESSING PROCEDURES:

1) Data Recorder Software - The contractor shall use the Government-provided data recorder software to enter and edit the collected data. The Contractor shall download the latest version of historical data files from MIDAS website and EPF’s from BOX Drive, before starting the plot. The Contractor shall resolve all errors/critical warnings and provide a detailed explanation for all critical warnings before uploading the plot and its required EPF formatted files to the MIDAS website and to the BOX Drive location.

Explanations are entered in a text box associated with each warning or critical warning in the MIDAS

Mobile application.

https://apps.fs.usda.gov/fia/midas-access/main https://apps.fs.usda.gov/fia/midas-access/main

2) Software Updates - The software may be updated during the period of performance. Contractors shall login to the MIDAS website and receive updates before editing, processing, and uploading the plots to

MIDAS for completion/payment. PDRs shall be updated at these times.

3) Plot Editing Tools- The contractor shall use the latest MIDAS Mobile or MIDAS Control Panel software to edit each plot.

4) Submeter GNSS - A JAVAD TRIUMPH-2 (L2+GLONASS) will be used to collect submeter coordinates. For each subplot a rover file raw file (.jps) must be downloaded by connecting the unit to a computer and moving each .jps file to C:\Midas\PlotPackets\PNWRS\GPS as described in the “Field

Instructions”

COMPLETED ELECTRONIC DATA SUBMISSION FOR EACH PLOT:

After successfully uploading plots to the MIDAS website server, as described in EXHIBIT J, EPF’s for each plot shall be submitted according to solicitation Section E-3 - GOVERNMENT’S QUALITY ASSURANCE

PLAN.

EXHIBIT G: LANDOWNER CONTACT

The landowner contact form is not required for this solicitation.

EXHIBIT H: ELECTRONIC PLOT FILES

The Electronic Plot Folders (EPF) will not be distributed until after individual contract awards are made. The process and the files described in EXHIBIT H are subject to change annually. The most up to date process and required files are referenced in the “Field Instructions”.

EPF, File Descriptions

Each plot is represented by a folder named by

State.County.PlotNumber.Cycle.Subcycle.Phase.ManualVersion.STD which is also referred to as

<MIDASfilename>. Example: WA.061.06310.06.09.P2.930.STD

Each prefield plot folder has files for reference and documentation as follows. These files will be provided by The Government, from a storage location subject to change annually.

Historical Reference Files

• Aerial Image: <MIDASfilename>.IMAGE.PDF. A Digital Orthophoto Quadrangle (DOQ) with a 1:12000 scale, with plot center indicated. This file will be updated if plot center is deemed to be labeled incorrectly and loaded with the rest of the EPF files.

• Data <MIDASfilename>.Prevdata<Year>.PDF. All data from the previous visit. Possible aid in relocation, tally, etc. For reference only, this file is not updated.

• Previous Plotcard(s): PREVPLOTCARD_State_PlotNumber_Year. Scanned reproductions of previous survey plot cards. For reference only, this file is not updated.

• Current Plotcard: <MIDASfilename>.PLOTCARD.doc. Blank plotcard that will be filled out when the plot is completed. This document will be updated by the contract crew and placed in the C:\Midas\PlotPacket|PNWRS\Collected\<MIDASfilename> folder.

• Topographic Map: TOPO_State_PlotNumber. Digital topographic map of plot area with plot center indicated. For reference only, this file is not updated.

• Historical Fire and Disease Maps

Current Survey Files

These electronic plot files are directly referenced or updated as plots are measured and placed into

C:\Midas\PlotPackets\PNWRS\Collected\<MIDASfilename> folder| and loaded to a digital Government data storage location. This process may change annually, as well as the required files. The most up to date process and required files are referenced in the “Field Instructions”.

• Plotcard: <MIDASfilename>.PLOTCARD.PDF, Updateable current survey plotcard. To be saved as a .pdf using Microsoft word.

• Image: <MIDASfilename>.IMAGE.PDF. A PDF document of local map, generally showing roads, trails, topo, etc.

• Data Printout: <MIDASfilename>.PRINTOUT.PDF. Required MIDAS data printout file

(pdf). These files are created by MIDAS Control Panel as part of required documentation of plot sampling.

• Landowner Contact Form: <MIDASfilename>.LCF.PDF when required.

Note: If there are additional items you feel would aid in the relocation and/or remeasurement of the plot, they may be stored as part of the permanent EPF for that plot. Examples would be additional reference point(s) with GPS readings. While not required, these are encouraged if they could help in the relocation, or aid in the analysis, of the plot data. Plots with minimal field referencing, i.e. wilderness plots, plots or RPs along trails or roads, may benefit especially with additional items.

Examples of Prefield Folder Contents

Most current digital image of plot area.

<MIDASfilename>.IMAGE.PDF or .JPG

Scan of Previous Plotcard:

<MIDASfilename>PrevPlotcard<year>.PDF(for reference only)

Current Plot card. To be filled out as required for current survey.

<MIDASfilename>.PLOTCARD.PDF

Local topo map (for reference only)

Topo_State_Plot

MIDAS previous data (PDF) file

State.County.Plot<Year>

Previous Plot Data Printout: Includes Midas plot data, Boundary Viewer, HT/DBH Graph, critical warning explanations, and warnings.

<MIDASfilename>PLOTDATA.PDF

Historical Fire Maps

FIREHIST_State_Plot

Historical Insect and Disease Maps

InsectDisHIST_State_Plot

EXHIBIT I: ELECTRONIC PLOT FOLDER INSPECTION FORM

EHIBIT J: ELECTRONIC PLOT FOLDER INSTRUCTIONS

These instructions detail how Electronic Plot Folders (EPF) will be transferred to your computer and then upon completion of each plot, loaded onto the MIDAS website and BOX

Drive. On the Midas website, click on the help button to install the software.

Installing Box Drive

1) After contract award, request access to the Box Drive from COR. Contractors will receive an e-mail sharing the Box folder.

2) Click on the “Accept Invite” in the email invitation:

3) This will open the Box website, where you will fill out a form with your personal information and choose a password for logging into your Box account:

4) In the choice displayed between Personal and Work, click the “Skip this and go straight to Box” text:

5) This will open your box account. Click on the “View Terms” and read and accept terms of use:

6) If the External User already has a Box account with the email address the invitation was sent to, then logon using that email address and the password.

7) Once a box account has been created, go to the following URL and download the Box

Drive App: https://www.box.com/resources/downloads/drive

8) Run the downloaded .msi file and click through the prompts to install Box drive.

General EPF Process

1) EPFs are manually transferred to laptop via external hard drive or BOX Drive and placed in C:\Midas\PlotPackets\PNWRS\Prefield

2) EPF files necessary for the field are printed or transferred to rugged field tablet/PC/Smart

Device etc.

https://www.box.com/resources/downloads/drive https://www.box.com/resources/downloads/drive

3) Field work is completed for plot.

4) Download plots from PDR (see MIDAS instructions)

5) Fill out Electronic Plot Card

6) Edit Image

7) Edit plots in MIDAS Mobile or MIDAS Plot Utilities

8) Print plot as .pdf

9) Completed plot EPFs will be saved to Upload from

C:\Midas\PlotPackets\PNWRS\Collected

10) Place the .jps files for each subplot in C:\Midas\PlotPackets\PNWRS\GPS

11) Upload .STD to MIDAS website

12) Upload EPF files using MIDAS Utilities to Box Drive 13) EPF process complete.

Detailed EPF Process

1. All Prefield EPF data (Previous plot cards and data, previous images and photos, and any other pertinent information) will be provided by the Government. The Prefield

EPF’s will be transferred manually to your computer via an external hard drive or BOX

Drive and saved to the

“Prefield” folder (C:\Midas\PlotPackets\PNWRS\Prefield\PlotNumber). See

EXHIBIT H.

2. EPF files necessary for the field are printed or transferred to rugged field tablet/PC/S

Device etc.

3. Complete field work for plot

4. Download plots from PDR (See MIDAS Instructions)

5. Fill out electronic plot card from

C:\Midas\PlotPackets\PNWRS\Prefield\PlotNumber, rename as necessary to State.County.PlotNumber.Cycle.Subcycle.Phase.FieldGuideVersion.PLOTCA

RD.DOCX and leave in this location until plot has been “printed.”

https://apps.fs.fed.us/fia/midas/Main?action=MIDASUsersGuide

• To update Plot Card, open the file State.County.PlotNumber.

Cycle.Subcycle.Phase.FieldGuideVersion.PLOTCARD.DOCX

• It is a two-page document corresponding to the front and back of the hard copy plot card. The State, county, NIMS plot number, R6 CVS number (if any), have been previously filled out for convenience; a blank template is available if necessary.

• Items to be filled out, indicated by “enter…” are Date, Crew Leader, Crew, and

Hazard or Safety Concerns.

• Items to be filled out using drawing tools are Mapping and Plot Access. In many cases it may be appropriate to cut and paste from other documents; for example, a section of a local map may suffice for plot access. Hand drawings may be rendered but an electronic version is required (e.g. scanning).

• Save .docx as .pdf using word and then transfer to

C:\Midas\PlotPackets\PNWRS\PlotPackets\PlotNumber

6. Edit Image from C:\Midas\PlotPackets\PNWRS\Prefield\PlotNumber, rename as necessary to

State.County.PlotNumber.Cycle.Subcycle.Phase.FieldGuideVersion.IMAGE.

JPG and leave in this location until plot has been “printed”

To update Image, right-click the satellite image file

State.County.PlotNumber.IMAGE.jpg and open with a photo editor. Use image symbols below to update image.

Update the “Field Season Year” to the current year.

Place a small red circle with crosshairs in the center of the image indicates where the SP1 plot stake should be, like the pinprick in the old aerial photograph. If field examination and/or GNSS readings show the plot location is incorrect, create a small red dot and place it onto the image where the correct plot center is. If plot center is in the correct location as shown on the image, there is no need to update plot center.

Copy the symbol for Reference Point (RP, a triangle), and paste and label it onto the image having the symbol centered on the RP referenced in the field. Use the POD symbol below to also include any PORs or POD that are within the area of the image file.

Fill in text box with date, SP., DBH, AZ, and HD to N1 on image (do not include background fill in the text box, doing so will obscure the image). Image file must be of equal resolution as original image file provided by government, reduced quality of image will not be accepted, and plots will be returned to be adjusted.

Save as:

State.County.PlotNumber.Cycle.Subcycle.Phase.FieldGuideVersion.IMAGE.JPG

Image Symbols

Use these (or similar) images to update Plot image file. Cut and paste symbols only (no background) onto image file. Color and size may be adjusted if appropriate. Keep Image symbol lines as thin as possible, but still easily viewable on the image.

Plot Center Symbol

RP Symbol

POD

7. Edit plots in MIDAS Mobile or MIDAS Tablet (See MIDAS Instructions https://apps.fs.fed.us/fia/midas/Main?action=MIDASUsersGuide)

8. Print Plots as .pdf C:\Midas\PlotPackets\PNWRS\Collected\<Plot>

9. The Plot Card and Image must be moved to

C:\Midas\PlotPackets\PNWRS\Collected\<plot> from

C:\Midas\PlotPackets\PNWRS\Prefield\<plot>

10. Each plot needing sub-meter GNSS coordinates will also require 4 rover or raw files (.ssf or .jps) for each plot in C:\Midas\PlotPackets\PNWRS\GPS See

“Downloading Rover files from the Geo Unit” or “Downloading Raw files from the JAVAD Triumph-2.”

From your desktop MIDAS Control “Print” the

Make certain the PDF only radio button is selected.

Th lt it t ill t ll ti t https://apps.fs.fed.us/fia/midas/Main?action=MIDASUsersGuide

PLOT PACKAGER INSTRUCTIONS FOR LOADING PLOT DATA AND

EPF FILES

All files associated with each plot will now be "packaged" and zipped prior to loading in Midas. This replaces the Upload EPF Files in MIDAS Utilities. When plots are ready to load, first open Midas Utilities and click

Plot Packager as shown highlighted below.

Plot packager program will open.

After selecting package plot(s), the packages to zip folder will pop up.

Plot data file folders will appear under each plot. Packager will indicate if the data file passes validations or not (first subfolder). Folders can be expanded by clicking + next to the folder. Errors, Critical Warnings, Warnings and Notes will appear for crew to review. This plot is error free, so it is OK to load.

EPF and HP GPS files must be named properly and in the correct folder locations on the C:\drive.

See Section S.12 for file naming and file location requirements.

Buttons at the bottom are self-explanatory. Expand and collapse all plots does this for each of the folders.

Remove failed plots allows user to remove a plot with errors and continue with the rest that are error free.

Zip one or all plots with the 2 buttons on the right.

Pop up window will appear indicating plot has been packaged.

Click ok, and program will return to main screen.

If a plot needs to be unpackaged for any reason, see below for details.

Once plot has been packaged it is ready to load into Midas.

LOADING PACKAGED PLOTS INTO MIDAS

Once all plot files have been packaged, they can be loaded into Midas. Packaged plots files are saved in a separate folder location C:\MIDAS\Uploads\PNWRS.

Now go to Midas Website https://apps.fs.usda.gov/fia/midas-v2/main. Login using username and password.

Select Edit and then Load Field data from the menu options. This is the same loading procedure that has always been used in Midas.

Once the loader screen appears click choose files shown below. A window will appear and select browse next to P2/P3 plot files.

File explorer window will appear.

Browse to C:\Midas\Uploads\PNWRS folder and select the plot(s) you want to load.

The plot file will now appear in the loader screen.

Follow the same loading procedures as was previously done shown below.

Check plot box next to file, then select check plot status.

If plot is ok to load, select load database. Midas will attempt to load the zipped plot file. This may take up to a minute depending on how many files are being loaded and the quality of internet connection. Once the attempt to load a plot is complete, the loader screen will indicate if plot was successfully loaded or not.

If a receipt of record in txt format is needed, select GetPlotLoadStatusFile.

Click release files to refresh the loader screen or click close to finish.

When finished click close on the bottom of the screen. Plot information in the loader screen will be updated to visually confirm plot has been loaded and the loader screen can be closed, or user can navigate to another menu option within Midas.

SUMMARY OF ELECTRONIC PLOT FOLDER FILE NAMES AND

FOLDER LOCATIONS

The following lists provide a summary of the required Electronic Plot Folder components, file names and folder locations to be submitted.

PRODUCTION PLOTS (PLOT STATUS = 1 OR 2)

The following file should be saved in C:\Midas\MidasData\Work\pnwrs

1. Data file: <MIDASfilename>

The following files should be saved in C:\Midas\PlotPackets\PNWRS\Work\<State>\<Midasfilename>

1. Plot Data Printout: <MIDASfilename>.PLOTDATA.PDF

2. Plot Card: <MIDASfilename>.PLOTCARD.PDF

3. Digital Image file: <MIDASfilename>.IMAGE.JPG or PDF

4. Landowner Report (when applicable): <MIDASfilename>.OWN.PDF or Landowner Contact Form

(when applicable): <MIDASfilename>.LCF.PDF

The following files should be saved in C:\Midas\MidasGPS\Work\pnwrs

5. HPGNSS Files if collected: MIDASfilename.SP#.JPS

NONSAMPLED PLOTS (PLOT STATUS = 3)

The following file should be saved in C:\Midas\MidasData\Work\pnwrs

1. Data file: <MIDASfilename>

The following files should be saved in C:\Midas\PlotPackets\PNWRS\Work\<State>\<Midasfilename>

1. Plot Data Printout: <MIDASfilename>.PLOTDATA.PDF

2. Plot Card: <MIDASfilename>.PLOTCARD.PDFNecessary Files for EPF Load to BOX Drive:

3. Digital Image file: <MIDASfilename>.IMAGE.JPG or PDF

4. Landowner Report (when applicable): <MIDASfilename>.OWN.PDF or Landowner Contact Form

(when applicable): <MIDASfilename>.LCF.PDF

HPGNSS files are not required

EXHIBIT K: SURVEY GRADE GNSS INSTRUCTIONS

Configuring and Using the JAVAD Triumph-2 GNSS Receiver.

*Please reference Appendix P in the 2026 “Field Instructions” for the most up to date operating instructions.

Setting up your computer and connecting the JAVAD Triumph-2

A. Download and Install JAVAD NetView & Modem

(http://www.javad.com/jgnss/products/software/netview.html)

NetView & Modem is a free Windows application used to configure files and manage the

Triumph-2 when it is connected to a computer.

B. Download and Install USB Drivers for Windows XP and later

(https://www.javad.com/jgnss/support/update.html)

This is all the way to the bottom of the page under the Drivers section. This will allow you to connect the device to a computer.

C. Connect the Triumph-2 to the computer

1. Connect the device to the computer with a USB cord.

2. Open Netview & Modem by double clicking the icon on your desktop

3. Under the Receiver pane on the right find the device in the Serial/USB-

>Serial/Bluetooth section, click the connect icon ( ) on the left next to the device name.

The device will then show up on the left in the Devices pane http://www.javad.com/jgnss/products/software/netview.html http://www.javad.com/jgnss/products/software/netview.html http://www.javad.com/jgnss/products/software/netview.html https://www.javad.com/jgnss/support/update.html https://www.javad.com/jgnss/support/update.html https://www.javad.com/jgnss/support/update.html https://www.javad.com/jgnss/support/update.html https://www.javad.com/jgnss/support/update.html

Netview & Modem User Guide http://www.javad.com/downloads/javadgnss/manuals/NetView/NetViewModem_So ftware_Manual.pdf

Triumph 2 Quick Start Guide https://www.javad.com/downloads/javadgnss/manuals/hardware/TRIUMPH2_Quick_Start_Guide

.pdf

Setting up the Javad Triumph-2 on an iPhone

A. In the iPhone App Store, download the NetBrowser app.

B. In iPhone wifi menu, find Triumph-2 under devices, then connect (there may be a warning about no internet connection, ignore this).

C. Tap the next to the network name to go into the settings.

http://www.javad.com/downloads/javadgnss/manuals/NetView/NetViewModem_Software_Manual.pdf http://www.javad.com/downloads/javadgnss/manuals/NetView/NetViewModem_Software_Manual.pdf http://www.javad.com/downloads/javadgnss/manuals/NetView/NetViewModem_Software_Manual.pdf http://www.javad.com/downloads/javadgnss/manuals/NetView/NetViewModem_Software_Manual.pdf http://www.javad.com/downloads/javadgnss/manuals/NetView/NetViewModem_Software_Manual.pdf http://www.javad.com/downloads/javadgnss/manuals/NetView/NetViewModem_Software_Manual.pdf https://www.javad.com/downloads/javadgnss/manuals/hardware/TRIUMPH-2_Quick_Start_Guide.pdf https://www.javad.com/downloads/javadgnss/manuals/hardware/TRIUMPH-2_Quick_Start_Guide.pdf https://www.javad.com/downloads/javadgnss/manuals/hardware/TRIUMPH-2_Quick_Start_Guide.pdf https://www.javad.com/downloads/javadgnss/manuals/hardware/TRIUMPH-2_Quick_Start_Guide.pdf https://www.javad.com/downloads/javadgnss/manuals/hardware/TRIUMPH-2_Quick_Start_Guide.pdf https://www.javad.com/downloads/javadgnss/manuals/hardware/TRIUMPH-2_Quick_Start_Guide.pdf

D. Make sure “DHCP” is highlighted with IP Address 192.168.0.2.

NOTE: The directions documented in Triumph-2 Quick Start guide connecting with in an iPhone/iPad are different from the ones documented here. The directions in this document came from a JAVAD representative.

E. On the iPhone start the Netbrowser app.

F. At the bottom of the first screen enter this following information:

1. Host: 192.168.0.1

2. Port: 8002

3. Logical Port: Auto

4. Password: 1234

G. Tap Connect, now your Triumph-2 can be managed from your iPhone. Setting up the Javad Triumph-2 on an Android device A. Download the NetBrowser app.

from your app store

B. Open the NetBrowser app

C. Using Bluetooth, tap connect

D. Now your Triumph-2 can be managed from your Android device Record positions with iPhone or Android device

A. Open the NetBrowser app on your Device, then tap the dropdown tab in the upper right of the screen. Select files.

B. Fill in the information for the subplot you are on.

1. OR-000-00000-SP1 (ST-CTY-PLOT-Subplot)

2. Orient the green arrow on the side of the JAVAD Triumph-2 to North.

3. Enter an antennae height (meters), this is the distance from the bottom of the receiver to the ground. If the unit is being placed on the ground antennae height should be set to “0” (meters).

4. Height type is “Vertical”

5. Antenna Type is “JavTriumph_2A None”

C. Tap “Start Recording.” Record postions for 15 minutes.

D. When done tap “Stop” beside the filename, you will have to scroll the screen to the right to see the stop button. To keep track of when to stop set a timer for 15min. or look at the time the recording was started.

Recording positions without an external device

A. If using NetBrowser and external device isn’t an option (out of batteries, don’t have one, etc.) positions can be recorded by pressing the record button on the side of the

Triumph-2. A light on the side of the device with the same symbol will start blinking to indicate positions are being collected.

B. This starts recording 1 position per second until the same button is pressed again to stop recording. When this method is used the filenames will be sequential numbers that must be renamed once connected to a computer.

Download files from the Triumph 2 to a computer using iTunes

A. Using the NetBrowser app on the iPhone: under the “Files” tab find the files you want and choose download. Connect the phone to the computer then open iTunes. B. In the phone page select the “File Sharing” page from the options on the left.

C. Click Netbrowser.

D. Select the “NetBrowser” folder and then click the “Save to” button.

E. Choose the location. All files downloaded to the phone from the device will be automatically saved to the same location.

Download files from the Triumph 2 to a computer from Android Device

1. Connect Android Device to computer using USB

2. Navigate to the Android Device with Windows Explorer (make sure the device knows which files to share by selecting them on USB options)

3. Drag the files from the Android Device to your

C:\Midas\PlotPackets\PNWRS\GPS\ST.CTY.PLOT

Download files from the Triumph 2 to a computer using USB

1. Connect the Triumph-2 directly to a computer using a USB.

2. Open NetView & Modem on the computer

3. Connect the device using the USB connection, go to the “Files” option from the list on the left. Choose the files to download to the computer from the device. Note:

This same screen can also be used to rename files collected without the iPhone interface.

Post-processing .jps files using the DPOS online tool (not required)

This tool works well for post-processing and will give a report (standard or extended format) with the corrected positions and information about the base stations used in the solution. As of now, it does not show the number of positions collected only the number of minutes. The major drawback of using this is that it will throw an error if you try to put files that were collected on different dates in the same project so each day’s positions just need to be post-processed separately.

A. Go to this website (use Google Chrome).

B. Register for an account or login.

C. Open the folder with the .jps files in the location you saved them from iTunes, drag the files you want to post-process into the webpage. Adjust parameters as necessary. Make sure the “Network” option is set to CORS. Give it a project name, set to “Auto” to get the info from the device and hit “Submit.”

D. Go the “Browse Reports” page and wait for the project to finish. Click the name to see a map of the base stations it used and view the report. Click the icons to the right of the name to download a .pdf or .txt file of the report. Useful resources

• JPS Viewer- this program can open the raw .jps files and summarize them.

• Justin Link- this program is similar to Justin, the JAVAD post-processing software, but it does not have the post processing capabilities, so it does not cost. It can load .jps files in an ArcMap type interface and make certain edits such as datum or antennae configuration. It is also a useful way to quickly view the point locations over NAIP imagery.

https://app.javad.com/jca/#/dpos/list https://app.javad.com/jca/#/dpos/list http://javad.com/jgnss/products/software/jps_viewer.html http://javad.com/jgnss/products/software/jps_viewer.html http://javad.com/jgnss/products/software/justinlink.html http://javad.com/jgnss/products/software/justinlink.html

EXHIBIT L: FORMS AND GUIDES

No forms and guides for this solicitation

EXHIBIT M: SAFETY PLAN

The Contractor shall provide a detailed safety plan to the COR. The format is at the discretion of

The Contractor.