12363N26Q4108 Ottawa NF Bobcat Mark and Cruise.pdf

REQUEST FOR QUOTATION PAGE OF PAGES

(THIS IS NOT AN ORDER) THIS RFQ IS IS NOT A SMALL BUSINESS SET- ASIDE 1 59

1. REQUEST NO. 2. DATE ISSUED 3. REQUISITION/PURCHASE REQUEST NO. 4. CERT. FOR NAT.DEF. RATING

12363N26Q4108 4/17/2026 UNDER BDSA REG. 2

AND/OR DMS REG. 1

5a. ISSUED BY 6. DELIVER BY (Date) National Stewardship Team IRSC 1400 Independence Ave. SW

MS-1138

Washington DC 20250-1138; Email Return: cynthia.horwitz@usda.gov

Date of Award through 11/30/2026

5b. FOR INFORMATION: 7. DELIVERY FOB DESTINATION NAME X OTHER (See Schedule)

9. DESTINATION

Cynthia Horwitz cynthia.horwitz@usda.gov a. NAME OF CONSIGNEE

8. TO: Ottawa National Forest

a. NAME b. COMPANY b. STREET ADDRESS

c. STREET ADDRESS c. CITY

d. CITY e. STATE f. ZIP CODE d. STATE e. ZIP CODE

10. PLEASE FURNISH QUOTATIONS TO THE

ISSUING OFFICE IN BLOCK 5a ON OR

BEFORE

IMPORTANT: This is a request for information, and quotations furnished are not offers. If you are unable to quote, please so indicate on this form and return it to the address in BLOCK 5a.

This request does not commit the Government to pay any costs incurred in the preparation of the

5/7/2026 at 11:00 am Central Time submission of this quotation or to contract for supplies or services. Supplies are of domestic origin unless otherwise indicated by quoter. Any representations and/or certifications attached to this Request for Quotations must be completed by the quoter.

11. SCHEDULE (Include applicable Federal, State and local taxes)

ITEM NO. SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

(a) (b) (c) (d) (e) (f) National Forest

Region 9 Timber Mark & Cruise BPA Call Order: 12363N26Q4108

Please place your price quotation in the Schedule of Items.

Furnishing Quotation: Complete Standard Form 18, the Schedule of Items, and provide a response to the other Evaluation Criteria identified herein. Return to the email address shown in Block 5a. Please place “Solicitation No. 12363N26Q4108 in email Subject.

a. 10 CALENDAR DAYS (%) b. 20 CALENDAR DAYS c. 30 CALENDAR DAYS d. CALENDAR DAYS

12. DISCOUNT FOR PROMPT PAYMENT (%) (%) NUMBER PERCENTAGE

NOTE: Additional provisions and representations are X are not attached.

13. NAME AND ADDRESS OF QUOTER 14. SIGNATURE OF PERSON AUTHORIZED TO 15. DATE OF

a. NAME OF QUOTER SIGN QUOTATION QUOTATION

UEI No._____________ BPA No.

b. STREET ADDRESS 16. SIGNER

a. NAME (Type or print) b. TELEPHONE

c. COUNTY AREA CODE

d. CITY e. STATE f. ZIP CODE c. TITLE (Type or Print) NUMBER

NSN 7540-01-152-8084

Previous edition not usable

18-121 STANDARD FORM 18 (Rev. 6-95) Prescribed by GSA-FAR (48 CFR) 53.215-1(a)

X

12363N26Q4108 Ottawa NF Bobcat Mark and Cruise Page 1 of 59 mailto:XXXXX.XXXXX@usdsa.gov

Schedule of Items

Item No. Unit Name Estimated

Quantity Unit of

Measure Unit Price Total

1. Bobcat Stewardship T.S. (Estimated Acres) – Contract Term Date: 11/30/2026

1-a Selection [PUs 02-07, 12-14] 414 acre $_________ $___________

1-b Thinning [10] 18 acre $_________ $___________

1-c Clear Cut 100% Count [PUs 01,08-09, & 11] 122 acre $_________ $___________

Total Price Quote: $____________

1. Description of Work: This marking and cruising contract is for 554 acres in Selection, Clearcut, & Thinning harvest units within a single Sale Area. The Sample Tree Cruising Method (STR) will be applied to all included payment units. The requirements outlined in the parent BPA award are specific to this Call, and supplemental to the requirements of the parent agreement. The specifications in this Call may supersede or replace contract specifications in the parent contract, when allowed by the parent contract agreement.

2. Project Location. Bobcat Stewardship is located within Gogebic County on the Ottawa National Forest. T46N R42W, Sections 21-22, 27-28, & 34. The sale can be accessed from the following directions:

a. From Watersmeet, Travel west on US-2 for 25.6 miles. Turn south onto Hwy 64 south and travel 0.3 miles.

You will have reached the center of the sale with the sale being on the north and south side of Hwy 64 south.

3. Government-Furnished Property.

a. Tree marking paint

b. R9 Timber Sale Cruise Tally Card & Instructions Sheet

c. Marking guides that include: cruise plan, marking prescriptions, designation method, and resource maps.

4. BPA Call Specifications. Refer to Attachment 01: Bobcat Stewardship Statement of Work and Attachment 03:

Bobcat Stewardship Section C for detailed specifications for each item.

a. Bobcat Stewardship SOW – Cruise Design, Marking Instructions, Prescriptions, & Sale Map

b. Bobcat Stewardship Section C

5. Performance Requirements Summary.

a. The Contractor shall furnish all labor, materials, equipment, tools, instruments, supplies, transportation, professional services, personnel, and supervision EXCEPT that which is designated in the Government Furnished Property clause to perform the Statement of Work/Specifications referenced in this contract.

Additionally, the contractor shall abide by the Ottawa National Forest's Timber Theft Prevention plan (TTPP)

– including, but not limited to, reconciling ALL paint (both empty & full paint cans) at the appropriate Forest Service office within 10 business days of issuance.

b. The Contractor shall GPS the location of ALL sample trees and provide a digital copy of these GPS locations on a payment unit-by-payment unit basis in a format that is useable by Forest Service personnel. GPS locations are required to be submitted to the Contracting Officer’s Representative (COR) when the cruise cards are submitted for the completed unit.

12363N26Q4108 Ottawa NF Bobcat Mark and Cruise Page 2 of 59

6. BPA Call Contract Time and Required Rate of Progress.

a. Estimated Start Work Date: Upon Award of Contract.

b. Summer and/or Winter Project: Work may occur in either summer and/or winter months. Work completed in CTM units is subject to weather conditions and may be halted temporarily due to snow conditions if stump marks are not able to be adequately applied.

c. Contract Time: The Contractor shall complete work on this Call Order in accordance with the following…

i. Bobcat Stewardship Contract Due Date: 11/30/2026

7. Attachments.

a. Attachment 01: Bobcat Stewardship Statement of Work (Cruise Design, Marking Instructions, & Silviculture Prescriptions)

b. Attachment 02: Bobcat Stewardship TS RFCA Map

c. Attachment 03: Bobcat Stewardship Section C

d. Attachment 04: Ottawa National Forest's Timber Theft Prevention plan (TTPP)

e. Attachment 05: Wage Determination

8. BPA Call Evaluation Criteria – Instructions to Quoters.

EVALUATION FACTORS FOR AWARD

FAR 52.252-1 Solicitation Provisions Incorporated by Reference (FEB 1998) This solicitation incorporates one or more solicitation provisions by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. The offeror is cautioned that the listed provisions may include blocks that must be completed by the offeror and submitted with its quotation or offer. In lieu of submitting the full text of those provisions, the offeror may identify the provision by paragraph identifier and provide the appropriate information with its quotation or offer. Also, the full text of a solicitation provision may be accessed electronically at this/these address(es):

https://www.acquisition.gov/browse/index/far (FAR clauses begin with 52) Department of Agriculture Acquisition Regulation (AGAR) Clauses: https://www.acquisition.gov/agar (AGAR clauses begin with 452) Deviations to provisions may be viewed at: https://www.dm.usda.gov/procurement/policy/FARClassDeviations.htm FAR 52.216-1 Type of Contract. (APR 1984) The Government contemplates award of a firm fixed price contract resulting from this solicitation.

Technical Package addressing the following evaluation factors and subfactors:

1. Past Performance. Determined by FedDataCheck and CPARS databases. Formal submission to address this factor has been completed under FAR 17.2 Options renewal and modification issuance. Source Selection Authority shall submit all Vendor Unique Entity Identifiers to FedDataCheck and CPARs to form a basis for responsibility and prior past performance. Each file shall be kept under vendor name at time of selection for an accurate and complete document of record.

2. Price. Price will be evaluated on the basis of reasonableness and total cost to the Government and shall be used to determine the comprehension and evaluation of the understanding of the work to be completed.

a. Quoters shall submit their quote(s) by submitting the following:

i. 1 copy of completed, signed SF-18 Request for Quotations form;

ii. 1 copy of completed Schedule of Items; and

iii. Quoter response(s) to technical (non-price) evaluation criteria.

12363N26Q4108 Ottawa NF Bobcat Mark and Cruise Page 3 of 59 https://www.acquisition.gov/browse/index/far https://www.acquisition.gov/agar https://www.dm.usda.gov/procurement/policy/FARClassDeviations.htm

b. Technical (non-price) evaluation criteria instructions. Quoters shall submit a response to the following non-price evaluation factor:

i. Contract Time and Schedule.

1. Quoters shall submit a proposal concerning how they intend to conform to the contract requirements concerning contract time and schedule.

2. Quoters may submit an alternate proposal that contains more specific and restrictive contract time requirements that the Contractor is willing to commit to as a condition of Call Order Award. For example, Quoters may consider proposing elements such as:

a. Specific start work date(s), completion dates, or performance timeframes for various phases of the work;

b. Specific minimum production rates that the Contractor is willing to commit to;

c. Proposed sequence of project execution; and/or

d. Other specific contract time commitments that the Contractor is willing to commit to.

9. Evaluation Criteria and Award Statement.

a. Technical / Non-Price Evaluation Factors.

i. Contract Time and Schedule. The Government will evaluate the Quoter’s proposal(s) concerning how they intend to conform to the contract time requirements of the Call Order. A Quoter response containing details that convincingly demonstrate to the Government that the Quoter will complete the Call Order within the minimum contract time requirements is highly desirable and will have a positive effect on the evaluation. Quoter proposals that propose completing all or part of the work faster than required by the Call Order as presented will be considered by the Government, and the ratings of such proposals will depend on the nature of the proposal and its anticipated benefit to the Government.

b. Price Quote. The Government will evaluate the Quoter’s proposed price(s) for price reasonableness.

c. Award Statement. Award will be made to the Quoter(s) whose response(s) represent the best value to the Government, technical and price factors considered. Evaluation factors other than cost or price, when combined, are approximately equal to cost or price in the award decision(s). The critical factor in making any price/technical trade-offs is not the spread between the technical ratings, but rather the significance of that difference. The significance of the difference in ratings will be determined on the basis of what that difference is and what it would cost the government to take advantage of it. Award may not necessarily be made for technical capabilities that would appear to exceed those needed for fulfilling the requirements of this contract. The Government reserves the right to make price/technical trade-offs that are in the best interest and advantageous to the Government.

Quotations should contain the quoter’s best technical and price terms. The Contracting Officer may reject any or all quotations. The Contracting Officer may issue a call order to other than the quoter with the lowest priced quotation. It is the Government’s intent to award without holding discussions. Technical Packages should be submitted initially on the most favorable terms, from a price and technical standpoint, which the quoter can submit to the Government. After the evaluation of quotations, the Contracting Officer may negotiate final terms with one or more quoters of the Government’s choice before issuing any order. The Contracting Officer will not negotiate with any quoters other than those of the Government’s choice and will not use the formal source selection procedures described in FAR 13. The government will evaluate information based on the following evaluation criteria.

The Government may reject any or all quotes if such action is determined to be in the best interest of the Government.

12363N26Q4108 Ottawa NF Bobcat Mark and Cruise Page 4 of 59

Item Description Cruise

Method Payment Units

Estimated Quantity

Unit of Issue Unit Price Total Price

1a Hardwood Selection STR1 02-07 & 12-14 414 acre $ $

1b Thinning STR1 10 18 acre $ $

1c Clearcut (100% Count) STR2 01, 08-09, & 11 122 acre $ $ Item 1 Total $

FY26 Ottawa National Forest South Zone

Attachment 1 - Schedule of Items

Bobcat- Contract Term Date: November 30th, 2026

Bobcat Stewardship Timber Sale Marking Contract - Estimated Acres

STR1 = Sample Tree Cruise w/ Cut Tree Marking STR2 = Sample Tree Cruise w/ 100 % Count PCME1 Cruise = Plot Cruising PCME2 Cruise = Plot Cruising with Cut Tree Marking

12363N26Q4108 Ottawa NF Bobcat Mark and Cruise Page 5 of 59

Sale Number: 21034 Estimated Sale Value: $140,000 Estimated CV Ranges: 17-47% Maximum Sampling Error: 10% Based on Cruise Data: Pre-Cruise Plots Cruise Methods: Sample Tree (STR) [Reference attached Minimum Tree and Piece Utilization Standards, dated 11/02/2015] [Total Sale Acres = 555 Acres including 1 acre ROW)]

Bobcat Payment Unit & Acreage Summary Table

P.U. # Estimated

Acres Final Acres

Strata Marking Method Species

P.U. 01 42 1 DxSpd* 100% Count P.U. 02 42 1 CTM All Species P.U. 03 67 1 CTM All Species P.U. 04 77 1 CTM All Species P.U. 05 84 1 CTM All Species P.U. 06 57 1 CTM All Species P.U. 07 32 1 CTM All Species P.U. 08 39 1 DxSpd* 100% Count P.U. 09 14 1 DxSpd* 100% Count P.U. 10 18 1 CTM All Species P.U. 11 27 1 DxSpd* 100% Count P.U. 12 31 1 CTM All Species P.U. 13 16 1 CTM All Species P.U. 14 08 1 CTM All Species P.U. 15 R.O.W

(01) #dummy#

1 CTM (USFS) All Species

* In PU's 01, 08, 09, & 11, all Oak, Elm, Cedar, Hemlock, White Pine, Red Pine, Paper Birch, Yellow Birch, Black Cherry and ANY orange-banded trees will be retained.

12363N26Q4108 Ottawa NF Bobcat Mark and Cruise Page 6 of 59

STRATA 1: (CTM)

Single-Tree Selection Payment Units: 02-07, 12-14 (414 Acres).

Red Pine Thinning Payment Unit: 10 (18 Acres).

100% Count Clearcut Payment Units: 01, 08, 09, & 11 (122 Acres).

Payment Unit 15 (R.O.W.) (1 acre) will be marked and cruised by USFS.

Sample Group

Species/Product (Unit) DBH Range Sample Interval

HS Small Hardwood/Pulpwood (02) 5.0”-10.99” 1:500

HL Large Hardwood/Pulpwood (02) 11.0”+ 1:100 SS Small Sugar Maple/Sawtimber (01) 11.0”-14.99” 1:75 SL Large Sugar Maple/Sawtimber (01) 15.0”+ 1:25 OS Small Other Hardwood/Sawtimber (01)

[includes Red Maple, Basswood, Black Cherry, Yellow Birch, White Birch, & Red Oak]

11.0”-14.99” 1:50

OL Large Other Hardwood/Sawtimber (01) [includes Red Maple, Basswood, Black Cherry, Yellow Birch, White Birch, & Red Oak]

15.0”+ 1:25

FP Ash/Pulpwood (02) [includes Black Ash & White Ash]

5.0”+ 1:50

FW Ash/Sawtimber (01) [includes Black Ash & White Ash]

11.0”+ 1:25

AS Small Aspen/Pulpwood (02) 5.0”-11.99” 1:200 AL Large Aspen/Pulpwood (02) 12.0”+ 1:100 CS Small Mixed Conifer/Pulpwood (02)

[includes Balsam Fir, Tamarack, Cedar, Hemlock, White Pine, Scots Pine, White Spruce, Black Spruce, & Norway Spruce]

5.0”-14.99” 1:150

CL Large Mixed Conifer/Pulpwood (02) [includes Balsam Fir, Tamarack, Cedar, Hemlock, Scots Pine, White Spruce, Black Spruce, & Norway Spruce]

15.0”+ 1:50

PP Pine/Pulpwood (02) [includes Red Pine & Jack Pine]

5.0”+ 1:50

PS Small Pine/Sawtimber (01) [includes Red Pine & White Pine]

9.0”-12.99” 1:100

PL Large Pine/Sawtimber (01) [includes Red Pine & White Pine]

13.0+ 1:25

Note: Cruise all Aspen, Balsam Fir, Spruce, & Jack Pine as pulpwood.

12363N26Q4108 Ottawa NF Bobcat Mark and Cruise Page 7 of 59

Marking Instructions

Hardwood Selection and Red Pine Thinning/Sample Tree Cruising (STR):

Payment Units: 02-07, 10, 12-14 (432 Acres).

ALL merchantable trees to be removed from these Payment Units require two paint marks at DBH on opposite sides of the tree AND a corresponding stump mark (see specific Marking Instructions for these Payment Units). Cruise marked trees using the Sample Groups and Sample Intervals above.

A random start should be used for each sample group at the start of marking in each payment unit. Select a random interval that is less than the required sample interval for the first tally in each sample group, thereafter, sample at the specified sample interval.

Maintain an accurate tree count by payment unit for each sample group. Original field records used for tracking tree counts must be with the tally cards or data recorder sheets when each unit is completed. Do not recopy field notes of tree counts or tally cards.

Clearcut/Sample Tree Cruising (STR, 100% Count):

Payment Units: 01, 08, 09, & 11 (122 Acres).

ALL merchantable trees within these Payment Units are designated for removal EXCEPT Oak, Elm, Cedar, Hemlock, Red Pine, & White Pine, Paper Birch, Yellow Birch, Black Cherry (which are designated retain tree species) AND Leave Trees (LTs). Merchantable trees (except Oak, Elm, Cedar, Hemlock, Red Pine, White Pine, Birch (Paper & Yellow), Black Cherry to be removed from these Payment Units only require a paint mark at DBH to verify the tree has been counted; a stump mark is not required. Designated retain species (Oak, Elm, Cedar, Hemlock, Red Pine, White Pine, & Birch (Yellow & Paper), Black Cherry require a paint mark at DBH AND at the stump only when chosen for removal (operability, disease/insect, or other conditions that may be described in the Marking Guides). Any designated retain trees marked with Cut Tree designation will be documented. Any and all LTs will be marked by USFS. LTs are to be marked with a single orange band at DBH and a corresponding orange stump mark.

As stated in the “REMARKS” and “MARKING GUIDE” section, no lone Elm or Oak are to be left. LTs will need to be marked around the lone oak or elm, if there is not a designated retain species adjacent to the elm/oak. LTs may also include healthy groups of hardwoods as stated in the Marking Guides. All banded LTs are to be counted and recorded by species and by payment unit during the cruise, preferably with provided Leave Tree Form and turned in with Tally Cards for each payment unit (see specific Marking Instructions for these Payment Units). Cruise marked trees using the Sample Groups and Sample Intervals above.

12363N26Q4108 Ottawa NF Bobcat Mark and Cruise Page 8 of 59

Right-of-Way Clearing (USFS mark)/Sample Tree Cruising (STR): Payment Unit 15 (1 acre)

ALL merchantable trees to be removed from this Payment Unit require paint marks at DBH on opposite sides of the tree AND a corresponding stump mark. Cruise marked trees using the Sample Groups and Sample Intervals above.

NOTE: Refer to Marking Guides for specific marking instructions for this Payment Unit.

* USFS personnel will be marking Payment Unit 15 - road R.O.W. at a later date.

NOTE: Government furnished tree marking paint (TMP) will be issued or returned by appointment only, at the WATERSMEET RANGER DISTRICT OFFICE. The primary point of contact for all TMP transactions will be the paint custodian. This person will be identified at the pre-work meeting. BLUE paint has been designated for this sale.

12363N26Q4108 Ottawa NF Bobcat Mark and Cruise Page 9 of 59

Cruise Design Prepared by: Hayley Jardeen Forestry Technician Date: 02/19/2026 Final Acres Updated by: Hayley Jardeen, Forestry Technician Date: 02/19/2026

Cruise Design Reviewed by: Brandon Pertile, Silviculture Technician Date: 02/19/2026 Cruise Design Reviewed & Updated by: Hayley Jardeen, Forestry Technician Date: 02/19/2026

Marking Contract Narrative by: Date:

Cruise Design & Marking Instructions Approved by: Jesse Cox Date: 03/13/26

12363N26Q4108 Ottawa NF Bobcat Mark and Cruise Page 10 of 59

MINIMUM TREE AND PIECE UTILIZATION STANDARDS (11/02/2015 revision)

Minimum Tree Specifications

Minimum Piece Specifications

SPECIES PRODUCT DBH (inches) Length (feet)

DIB

(inches)

Minimum Net Scale in % of Gross

Hardwoods (except aspen)

Sawlogs 11.0 8 9.6-11.5 95% 1/

Hardwoods Sawlogs 11.0 8 11.6+ 50% 1/ Softwood Sawlogs 9.0 8 7.6 40 All Species Pulpwood 5.0 8 4.0 70 and reasonably straight 2/

1/ In Timber Sale Contracts, all hardwood sawlogs will use 50% minimum net scale in gross %, due to limitations in TIM. Cruising will use 95% minimum net scale for small diameter logs (9.6 – 11.5 DIB).

2/ Seventy percent applies to rot, voids, and char. Mechanical type defects such as sweep, crook, spider heart, and ring shake will not be considered.

Reasonably straight - When the true line of a minimum length piece does not deviate more than ½ the inside diameter of the small and plus two inches from a straight line drawn between the centers of the ends of a piece.

The maximum deflection allowed is what will fit in a 20-inch cylinder.

A minimum tree must include at least one piece that meets minimum specifications.

** Product heights are now measured to the nearest foot. All heights are measured in feet from the ground on the high side of the stump.

1. Conifers – measure total height (to the tip) in feet and the cruise program will calculate the 4” cut-off.

2. Hardwoods (includes Aspen) – measure the height in feet to the 4” top.

3. Sawtimber – cut-off point or “stoppers” will follow our regular practices. Measure sawtimber height in feet. Secondary product height will be measured as described in item 1 or 2 depending on the species.

4. Default dib’s are already built into the equations;

pulpwood = 4.0” sawtimber = 9.6” (hardwood) = 7.6” (mixed conifers, pine)

5. On trees with a broken, dead, or deformed top, record the height to the point where the

4” top or the tip would have been if the tree were still growing normally, then record defect to account for the missing volume.

12363N26Q4108 Ottawa NF Bobcat Mark and Cruise Page 11 of 59

OTTAWA NATIONAL FOREST

SILVICULTURAL PRESCRIPTION / MARKING GUIDES

Ranger District

Comp- Stand

MA LTA ELTP Habitat

Type Cover Type LSC Year of

Origin Size

Density SI BA

02 162-07 2.1 11 417 TTS 95 840 1925 5 86 120

02 178-39 2.1 9/11 423A TMC 91 500 1935 8 31 130

02 178-57 2.1 9 420C ATD 11 500 1967 5 42 110

02 178-15 2.1 9/11 430D ATD 91 500 1966 6 83 140

STAND DESCRIPTION

These stands are dominated with aspen throughout and also includes scattered amounts of maple. Occasional large diameter hemlock are also present within the stands. Aspen diameter’s will vary but generally around 8-12” DBH. A fair amount of maple and balsam fir is present within the midstory, with minor amounts of black cherry. The understory can be dense with maple, balsam fir, cherry and hazel brush. There are areas of lower elevation/wet areas that should be avoided while marking.

DESIRED CONDITION

An even-aged aspen stand that is growing vigorously and free of competing vegetation. Long lived conifer species will be present but subordinate to the dominant aspen forest type. Accept mixed hardwood species in areas where aspen fails. Maintain small, dense patches of sapling-sized balsam fir, spruce, and hemlock when practicable. Patches should not exceed 20 percent of the unit acreage.

SHORT AND LONG TERM OBJECTIVES

• Apply silvicultural treatments to regenerate and restore a healthy even-aged aspen/birch stands.

• Retain remnant long-lived conifer that are healthy and tolerate the changing environment.

• Accept that native pathogens occur in retained trees to provide unique habitat niches for cavity nesting birds, insects, and mammals.

• Attention is given to maintaining ecological processes and functions in and around riparian areas where they occur in the sale area.

• Acceptable stocking would achieve approximately 3200 seedlings per acre for native species.

REMARKS

There are scattered, small, poorly drained pockets, seeps, steep slopes, perched water tables, or shallow bedrock areas; do not designate any trees for removal in these areas.

100% of spruce and balsam volume should be considered due to signs of spruce decline. 15% of hardwood volume should be considered salvage due to overstocked conditions. 40% of aspen volume should be considered salvage due to age. All other contract groups follow collection rate letter dated 1/27/2025.

NEPA DECISION DOCUMENT: Grosbeck TIMBER SALE: Bobcat PU: 1, 8, 9, 11

12363N26Q4108 Ottawa NF Bobcat Mark and Cruise Page 12 of 59

MARKING GUIDE:

Name of Treatment - 4117 (Clearcut w/ Reserves)

Residual BA/Ac – See below

Acres – See RFCA Map

The resultant stand appearance should have most acres having 0-10% canopy cover. This will ensure adequate sunlight to warm the ground to encourage suckering and provide a long-term free to grow condition for long term establishment of aspen.

• Don’t cut species such as hemlock, white pine, red pine, cedar, oak, birch (paper & yellow), black cherry, and elm species unless necessary to facilitate timber harvest operations. The oak and elm need to have adjacent trees retained to maintain the micro site surrounding the targeted reserve tree, this may include high risk aspen.

DESIGN CRITERIA AND MITIGATION MEASURES

Highlighted Design Criteria, see NEPA for all the criteria

• If any stick nests are found (A1) the wildlife biologist should be consulted.

• Reserve snags and den trees according to Forest Plan guidelines (p. 2-32); focus on retaining trees with features beneficial to the NLEB such as shaggy bark and cavities.

• If any archaeological sites are located during layout or implementation the Archaeologist should be consulted.

• Aspen stands with an objective to regenerate aspen with less than 30 ft2/acre of aspen basal area, harvesting will be restricted to the dormant season December 15 through March 15.

• Within harvest units with an objective to regenerate aspen (including aspen inclusions within non-clearcut units), harvesting operations and site preparation shall maintain small, dense patches of sapling-sized balsam fir, spruce, hemlock, or other conifer species when practicable.

POST HARVEST TREATMENTS

FACTS Code Name of Treatment Prescription 4493 Site Preparation for Naturals Remove all residual sub-merchantable material except some patches of low to the ground conifer and retain species noted above 4341 Stocking Survey Survey to ensure adequate regeneration of 3200 TPA on 40% 1/1000th ac plots. Evaluate diversity planting opportunities 4341 Stocking Survey Survey to ensure adequate regeneration of 3200 TPA on 40 % 1/1000th ac plots 4381 Certification for Naturals w

S/P Enter certification once regeneration goal is met

ACTIVITIES SUMMARY

Year Facts Activity Code Description 2033 4117 Clearcut harvest with reserves 2033 4493 Site preparation for natural regeneration – cut maple ash BF Spruce – Leave YB BC 2034 4341 1st year stocking survey 2036 4341 3rd year stocking survey 2036 4381 Certification for natural regeneration w/ SP

Prepared by: Eric Lane

Reviewed by:

Reviewed by:

Approved by: Eric Lane

Title: Silviculture Forester

Title:

Title:

Title: Certified Silviculturist

Date: 2/23/2026

Date:

Date:

Date: 2/23/2026

NEPA DECISION DOCUMENT: Grosbeck TIMBER SALE: Bobcat PU: 1, 8, 9, 11

12363N26Q4108 Ottawa NF Bobcat Mark and Cruise Page 13 of 59

Cover Type LSC Year of

Origin Size

02 162-18 2.1 11 423A TMC 89 500 1930 6 46 150

02 162-24 2.1 11 421 TMC 71 840 1925 6 33 160

02 162-13 2.1 11 421 TMC 71 840 1925 6 50 140

02 162-14 2.1 11 427B ATD-A 89 500 1935 6 47 145

02 162-16 2.1 11 427B ATD-A 85 500 1920 6 51 110

02 178-40 2.1 11 421 TMC 89 500 - 6 39 120

02 178-04 2.1 11 427B ATD-A 89 500 - 6 55 140

02 178-03 2.1 11 427B ATD-A 85 500 1916 6 51 110

02 178-36 2.1 11 427C ATD-A 89 500 - 9 48 140

02 178-01 2.1 11 427C ATD-A 85 500 - 6 53 140

02 178-55 2.1 11 420C ATD 89 500 1935 6 49 100

02 178-06 2.1 9/11 427C ATD-A 89 500 - 9 54 110

02 178-09 2.1 11 427C ATD-A 89 500 - 9 54 130

02 178-21 2.1 9 310C ATD 89 830 - 6 41 140

These are northern hardwood stands with maple dominant throughout the overstory. Other species scattered throughout the overstory include black cherry, yellow birch, hemlock, aspen and ash. The midstory is heavily comprised of maple, but there are areas throughout where black cherry stocking is fair. Other midstory species include yellow birch, ash, and balsam fir. The understory is made up of maple, black cherry, ash, and balsam fir, with minor amounts of hemlock. Some ironwood is present within the understory as well but is limited overall.

Ideally we’ll look to release the healthy black cherry and yellow birch throughout the midstory. The average BA is 130 ft2/ac, with an average diameter of 10-12” DBH.

Indicates the current average stocking for the stands listed above.

NEPA DECISION DOCUMENT: Grosbeck TIMBER SALE: Bobcat PU: 2-7, 12-14

Figure 1. Northern Hardwoods Stocking Chart (Leak et el 2014)

12363N26Q4108 Ottawa NF Bobcat Mark and Cruise Page 14 of 59

Uneven aged northern hardwood stands with the current species diversity maintained or increased. There will be minor amounts of clearcut inclusions, but selection can be applied to areas where the stocking is high and there is no need to regenerate a new age class. In areas where the objective is to regenerate aspen, maintain small, dense patches of sapling-sized balsam fir, spruce, and hemlock when practicable. Patches should not exceed 20 percent of the unit acreage.

• Apply silvicultural treatments to regenerate and restore a healthy uneven-aged northern hardwood stand.

• Retain or increase species diversity by retaining species other than sugar maple.

• Maintain and protect ecological processes and functions in and around riparian areas where they occur within the sale area.

• Promote and maintain aspen inclusions to maintain the health and vigor of the aspen clones.

• Achieve a stocking level of 3,000 seedlings per acre of native species.

There may be scattered, small, poorly drained pockets, seeps, steep slopes, perched water tables, or shallow bedrock areas;

do not designate any trees for removal in these areas.

100% of conifer volume should be considered salvage due to spruce decline and I&D issues within the stands. 60% of aspen volume should be considered salvage due to the aspens age class/quality. 15% of hardwood volume should be considered salvage due to overstocked stands and stressed trees. (in reference to collection rate letter dated 1/27/2025).

Name of Treatment - 4151 (Single Tree Selection)

Residual BA/Ac – 85 ft2/ac

MARKING GUIDE STANDARDS:

• GENERALLY RETAIN: hemlock, white pine, red pine, elm, paper birch, oak and cedar unless needed for logging operations.

• GENERALLY FAVOR ALL SPECIES OTHER THAN MAPLE AND IRONWOOD. Favor less common species but not at the expense of the best quality trees. If most conditions are relatively equal, continue to improve the relative spacing by marking ironwood, red and sugar maple to meet desired BA.

• If advanced regeneration of yellow birch, black cherry, or red oak is present, perform a release to increase sunlight availability (this may include the removal of a large tree, or multiple smaller, poor-quality trees) This would count towards the 1 gap per 3 acres.

• Consider all aspen, spruce, balsam and ironwood high risk and remove all. Where groups of aspen exist, expand opening by one tree length (75’) to improve stand diversity.

• Create medium size canopy gaps (100’x100’), measured bole to bole to encourage natural regeneration of shade intolerant/mid tolerant tree species (adjacent to healthy black cherry and yellow birch). Canopy gaps can be incorporated by the removal of large diameter and/or groups of smaller, poor-quality trees. Canopy gaps shouldn’t exceed 1 per 3 acres. Work with the COR when determining location of canopy gaps.

• Look to perform a crown release (ideally 3-4 sided) where red oak occur

• Resultant stand should have similar diameter distribution to the original stand with stocking throughout all diameter classes, generally looking to reduce initial BA by 1/3.

• Drop zones will be necessary when removing large diameter trees.

MARK BY ORDER OF REMOVAL

1. HIGH RISK: Remove trees of any size class that are diseased/structurally damaged that will die within the next 15 years that still contain merchantable products (unless needed for other resource value ie. cavity tree). Identify the best crop trees in the stand and provide a release by marking one or two main competing trees of lesser quality. If BA still higher than desired…

2. DENSITY/SPACING: Improve stand quality and growing space by marking fair – marginal quality trees (mostly 6-10” DBH class). Identify trees that are:

• Unacceptable Growing Stock: Trees that are likely to survive for a decade but have structural/growth/disease issues, exhibit signs of marginal improvement or significant volume loss, signs of suppression and are less likely to develop sawlog potential. If BA still higher than desired...

Acceptable Growing Stock: Saw log potential trees but possess slight quality issues to form, structure, and soundness

NEPA DECISION DOCUMENT: Grosbeck TIMBER SALE: Bobcat PU: 2-7, 12-14

12363N26Q4108 Ottawa NF Bobcat Mark and Cruise Page 15 of 59

(sweep, low branching, old branch stubs, epicormic sprouting). This also includes trees at biological maturity (black cherry > 15”, sugar maple and yellow birch > 19”, basswood > 21”)

Highlighted Design Criteria, see NEPA for all of the criteria

• Cull trees should be left for wildlife, do not remove trees with little or no value unless they pose a safety hazard. If cull trees need to be marked the silviculturist should be notified to look at the risk.

• If any stick nests are found the wildlife biologist should be consulted.

• Reserve snags and den trees according to Forest Plan guidelines (p. 2-32); focus on retaining trees with features beneficial to the NLEB such as shaggy bark and cavities.

• If any archaeological sites are located during layout or implementation the Archaeologist should be consulted.

• Within all harvest units except aspen clearcuts, favor hemlock, white pine, cedar, elm, and oak by retaining and crown releasing these species as directed in the stands’ silviculture prescription. These species may be cut to facilitate harvest operations where necessary, or to improve growing space and vigor among these same species that may occur within inclusions. The objective for retaining these species is to improve and/or maintain structural and compositional diversity (Forest Plan, p. 2-2).

4341 Stocking survey 1st year stocking survey to ensure adequate regeneration of 3000 TPA on 70% of plots – determine tree weed/release timing

4341 Stocking survey 3rd year stocking survey to ensure adequate regeneration of 3000 TPA on 70% of plots – determine tree weed/release timing

4382 Certification of natural regeneration Enter certification once regeneration goal is met

2033 4151 Single tree selection harvest 2034 4341 1st year stocking survey 2036 4341 3rd year stocking survey 2036 4382 Certification for natural regeneration

Reviewed by:

Approved by: Eric Lane

Title: Silviculture Forester

Title:

Title:

Title: Certified Silviculturist

Date: 2/23/2026

Date:

12363N26Q4108 Ottawa NF Bobcat Mark and Cruise Page 16 of 59

Cover Type LSC Year of

Origin Size

02 178-14 2.1 9 430D ATD 2 500 1972 6 69 180

This is a first entry red pine plantation that was established in the early 1970’s. The average BA is 170 ft2/ac and red pine diameters will vary from 6-18”, but generally average 10-12”. Other species are present including maple, black cherry, balsam fir, aspen and spruce but in limited capacity. The understory consists of maple, balsam fir and spruce.

The desired future condition is to promote healthy, vigorous, and resilient red pine that are fully utilizing the site and putting growth on the best quality stems while supporting small inclusions of aspen and the diversity of other species. Eventually, the expectation is that the plantations would develop big trees faster, over time, and have more of a heterogeneous structure and composition.

• Retain healthy white pine, hemlock, cedar, oak, and elm

• Promote and maintain aspen inclusions to maintain the health and vigor of the aspen clones while increasing species diversity within the pine plantation

• Maintain and protect ecological processes and functions in and around riparian areas where they occur within the sale

• Promote and maintain red pine to maintain the health and vigor of the plantation

There are scattered, small, poorly drained pockets, seeps, steep slopes, perched water tables, or shallow bedrock areas; do not designate any trees for removal in these areas.

NEPA DECISION DOCUMENT: Grosbeck TIMBER SALE: Bobcat PU: 10

12363N26Q4108 Ottawa NF Bobcat Mark and Cruise Page 17 of 59

Name of Treatment - 4220 (Commercial Thinning)

Residual BA/Ac – see below

• GENERALLY Retain all white pine, oak, cedar, elm and hemlock unless needed for logging operations

• Consider all aspen, spruce and balsam fir high risk and remove all. Where groups of aspen exist expand on the group by one tree length (75’) to improve within stand diversity and promote aspen regeneration

• Establish skid trails, generally every 50 feet and 12 feet wide prior to thinning the stand. Work with the COR when establishing skid trails

• Reduce stocking between skid trails by 30% but do not mark below 120 ft2/ac in any one area (except where regenerating aspen)

Order of Removal:

1. Retain most non-red pine species in areas where densities are high, accept some poor quality; this will contribute to structural/habitat diversity objectives for the stand

2. Remove all jack pine, spruce, balsam fir and aspen

3. Mark all high-risk trees and poor vigor; consider marking most red pine with crown decline as low vigor

4. Think from below; work towards the development of co-dominant and dominant trees by removing the competing smaller diameter and suppressed trees

5. If density still above desired then mark stems within the small and larger sawtimber category that exhibit sweep, crook, and forks within the merchantable bole

6. If density still above desired, then mark trees to improve the relative spacing; reference table below for general guidelines

Spacing Guideline AVE DBH OBSERVED SPACING (feet)

12” 10 14” 12 16” 14 18” 16

Crop Tree Characteristics:

1. Live Crown Ration ˃30%

2. Dominant or co-dominant trees with good crown vigor and stem quality

Low risk of mortality or failure

Highlighted Design Criteria, see NEPA for all of the criteria

• Cull trees should be left for wildlife, do not remove trees with little or no value unless they pose a safety hazard (A1). If cull trees need to be marked the silviculturist should be notified to look at the risk.

• If any stick nests are found (A1) the wildlife biologist should be consulted.

• If any archaeological sites are located during layout or implementation the Archaeologist should be consulted.

• Within red pine and spruce plantation cutting units only, the following operating requirements should be put into the timber sale contract: Within the sale area, all decked pine and spruce wood products cut during the period of May 1st through September 30th (spring and early summer thinning operations), shall be removed from the sale area within 30 days of cutting. Winter harvested pine and spruce wood products shall be removed by May 30, unless seasonal road limits prohibit hauling operations. The purpose of this requirement is to minimize the potential breeding sites for bark beetles (Gilmore and Palik, 2006, pp. 34-36).

• Designate skid trails to direct activities outside of riparian corridors as quickly as possible, minimize the number of skid trails within riparian corridors, and to avoid steep slopes (18% and greater) within the riparian corridors to avoid sedimentation and impacts on riparian function.

NEPA DECISION DOCUMENT: Grosbeck TIMBER SALE: Bobcat PU: 10

12363N26Q4108 Ottawa NF Bobcat Mark and Cruise Page 18 of 59

2033 4220 Commercial Thinning

Reviewed by:

Approved by: Eric Lane

Title: Silviculture Forester

Title:

Title:

Title: Certified Silviculturist

Date: 2/23/2026

Date:

12363N26Q4108 Ottawa NF Bobcat Mark and Cruise Page 19 of 59

F a ir A v e

Mill St rd

S t

W e s t S t

M a in

S t

R iv e r S t

F a ir A v e

Pine Ave

No rco

Rd

Marenisco

Kimberly Rd

Bobcat Lake

Kim berl y Rd

FS

Road 8500

FS

R o a d

B o b c a t L a k e R d

Bobcat #21034 Payment Unit & Vicinity Map - Estimated Acres ¯

0 0.5 10.25 Miles

Vicinity Map Not To Scale

21 22

T46N R43NScale 1:27,000

Estimated Acres

PU - ACRES

01 - 42 (C.C)

02 - 42 (CTM)

03 - 67 (CTM)

04 - 77 (CTM)

05 - 84 (CTM)

06 - 57 (CTM)

07 - 32 (CTM)

08 - 39 (C.C) 09 - 14 (C.C)

10 - 18 (THIN)

11 - 27 (C.C))

12 - 31 (CTM)

13 - 16 (CTM)

14 - 08 (CTM)

15 - 01 (R.O.W./USFS)

SALE ACRES

(01-15) = 555 ac

CONTRACT ACRES

(01-14) = 554 ac

Monumented Corner

S_USA.Section

Bobcat Estimated Acres

NON-FS

USDA FOREST SERVICE

New Construction

Decommission

Reconstruction

Regular Maintenance

<all other values>

Hayley Jardeen 02/18/2026

12363N26Q4108 Ottawa NF Bobcat Mark and Cruise Page 20 of 59

SECTION C – DESCRIPTION/SPECIFICATION/WORK STATEMENT

Scope of Contract This is an updated Section C document for the following timber sale:

- Bobcat Stewardship T.S. (Estimated Acres) – Payment Units 01-14; 554 acres1166296

This timber sale marking project involves timber marking and volume estimation of approximately 554 acres in Northern Hardwoods, Aspen, and Pine forest types, broken down by the following descriptions:

(1) HARDWOOD SINGLE-TREE SELECTION (uneven-age) (Marking & Cruising)

Payment Units 02-07, 12-14; approximately 414 acres

Uneven aged stands or even-aged stands with uneven-aged or even-aged objectives consisting of a mixture of Northern Hardwood types of various size classes. These stands contain both pulpwood and sawtimber Species/Product/Unit mixes. Marking objectives are to remove trees considered high risk, defective, poor form, or mature and to maintain or develop size class structure with optimum growing stock, per the specific marking instructions.

(2) THINNING SINGLE-TREE SELECTION (Commercial Thinning) (Marking & Cruising)

Payment Units 10; approximately 18 acres

Commercial thinning of pine. These stands contain both pulpwood and sawtimber Species/Product/Unit mixes. Marking objectives are to remove trees considered high risk, defective, poor form, or mature and to maintain or develop size class structure with optimum growing stock, per the specific marking instructions.

(3) CLEARCUT/REMOVAL CUT (Marking & Cruising - where all trees are counted)

Payment Units 01,08-09, & 11; approximately 122 acres

Generally, in a clearcut or removal cut, where all LIVE and/or DEAD trees that meet minimum specifications for size or species are designated for removal EXCEPT for trees marked as RESERVE TREES, LEAVE TREES, or trees within PROTECTED

AREAS.

In Payment Units where designated Species are too variable for Area Estimate Cruising methods, trees designated for removal will be marked with an intentional and discernable paint spot at eye level no smaller than 1 square inch to verify the tree was counted. Minimize over spray on non-designated species to avoid confusion. A stump mark is not generally required. Paint spots will face in generally the same direction. If any designated leave species (per marking instructions) are marked with a CTM designation, contractor will indicate this on tally card.

12363N26Q4108 Ottawa NF Bobcat Mark and Cruise Page 21 of 59

(4) SAMPLE TREE CRUISING METHOD

Applies to ALL Payment Units within the Bobcat Stewardship T.S.

The Sample Tree cruising method (STR) involves measuring a specified proportion (Sample Interval) of trees in the defined sub-population. The remaining trees included for removal are tallied as count trees. With this cruising method, every tree included for removal must be visited and marked.

NOTE: USFS has not marked the Road R.O.W. units for this sale yet. This will be done by USFS at a later date. For units that have a road running through them, contractor should still mark/cruise trees up to the edge of the existing road clearing.

NOTE: Government furnished tree marking paint (TMP) will be issued, or returned, by appointment only at the WATERSMEET RANGER DISTRICT OFFICE. The primary point of contact for all TMP transactions will be the paint custodian. This person will be identified at the pre-work meeting. BLUE paint has been designated for this sale.

NOTE: USFS will mark any and all Leave Trees.

NOTE: **Contractor will supply all gap locations on a map and coordinate this with the Contracting Officer Representative. **

This sale can be accessed from the following directions:

From Watersmeet, Travel west on US-2 for 25.6 miles. Turn south onto Hwy 64 south and travel

0.3 miles. You will have reached the center of the sale with the sale being on the north and south side of Hwy 64 south.

12363N26Q4108 Ottawa NF Bobcat Mark and Cruise Page 22 of 59

12363N26Q4108 Ottawa NF Bobcat Mark and Cruise Page 23 of 59

TIMBER THEFT PREVENTION PLAN

TABLE OF CONTENTS

PAGE

INTRODUCTION

OBJECTIVES

OPERERATING PROCEDURES

1. Organization and Staffing

2. Cross-Training and Coordination

3. Timber Sale Preparation

4. Timber Sale Administration

5. Regulatory Inspections

6. Documentation

7. TM—LEI Timber Theft Protocol

LAW ENFORCEMENT ACTIONS

1. General

2. Crime Scene Protection

3. Issuance of Violation Notices

SUSPENSION AND DEBARMENT

1. Mandatory Referral

2. Exception to Mandatory Referral

3. Case Documentation and Submission

PREVENTION

1. Theft Prevention Plots

2. Sale Area Layout

3. Tracer Paint Security

4. Theft Prevention Outside Sale Area

ACCOUNTABILITY

Responsibility

Appendix

…………………………………………………. 3

…………………………………………………. 3

…………………………………………………. 4

…………………………………………………. 4

…………………………………………………. 5

…………………………………………………. 5

…………………………………………………. 7

………………………………………………….10

………………………………………………... 11

…………………………………………………12

………………………………………………….12

……………………………………………….…12

………………………………………………….13

………………………………………………….13

………………………………………………….14

…………………………………………………14

…………………………………………………14

………………………………………………….15

………………………………………………….15

…….………………………………………….. 15

……….……………………………………….. 15

……….……………………………………….. 15

…….………………………………………….. 17

……….……………………………………….. 19

……………………………………………….. 19

……………………………………………….. 20

12363N26Q4108 Ottawa NF Bobcat Mark and Cruise Page 24 of 59

INTRODUCTION

The intent of the Ottawa National Forest (ONF) Timber Theft Prevention Plan (TTPP) is to improve and standardize theft prevention and detection measures by gaining consistency at the Forest level. All employees of the Forest Service share in the responsibility for the prevention, detection, reporting, and investigation of timber theft.

This plan is intended to promote effective coordination and communication with Timber Management

(TM), Law Enforcement & Investigations (LEI) and other staff groups when addressing violations of laws and regulations, noncompliance with timber sale contract provisions resulting in resource degradation, special forest products program administration, and unlawful cutting or removal of timber on adjacent public and private lands within National Forest boundaries.

The TTPP will also address the prompt detection, apprehension and prosecution of individuals entering the National Forest for the purpose of stealing timber or other forest products. Timber theft prevention on the ONF is a joint effort between TM and LEI. Involvement of State and Local law enforcement agencies and the public is welcomed to assist in observation and reporting of all unlawful activity affecting the National Forest System.

All direction in the R9 TTPP is incorporated by reference and shall be adhered to on the ONF. The

ONF TTPP will be reviewed annually and amended as needed to comply with any new or revised regulations or agency policies, including the R9 TTPP.

OBJECTIVES

This plan was developed to deter or prevent timber theft and improve our ability to detect, apprehend, and prosecute violators when theft does occur. The objectives of this plan are to:

Provide the skills and coordination necessary to prevent timber theft and prosecute timber theft when it does occur.

Promote and develop positive employee perceptions and attitudes regarding law enforcement and regulatory responsibilities in order to enhance and maintain timber and forest products accountability.

Develop and use processes and procedures that will reduce vulnerability and increase our ability to identify and detect product loss and theft.

Strengthen coordination between timber management and law enforcement so legal action can be aggressively and effectively pursued when theft does occur.

Promote and encourage coordination between National Forests for the prevention and detection of collusive bidding and market manipulation.

12363N26Q4108 Ottawa NF Bobcat Mark and Cruise Page 25 of 59

OPERATING PROCEDURES & ACTIONS

1. Organization and Staffing

As Forest Service budgets continue to be influenced by other national priorities; it is critical that the agency continue to explore ways to be more efficient in both TM and LEI program areas. Every opportunity to develop and maintain efficiencies and will be explored. Timber sale operations cannot be managed using shortcuts or deviations from existing policies or prescribed processes, nor can we accomplish desired objectives with untrained or understaffed organizations. It is recognized that we cannot sacrifice standards of professionalism or accountability to achieve the desired efficiency.

The Forest Supervisor and Patrol Captain will take the necessary steps to ensure qualified personnel are in place to effectively accomplish timber management and regulatory compliance program objectives. Training and certification standards for all TM and LEI personnel will meet the intent of

Forest Service Manual and Forest Service Handbook directives. The Forest Supervisor and Patrol

Captain will also insure that Forest Protection Officers (FPO) are trained and available for compliance and accountability work with Special Forest Product permits at appropriate times of the year.

The Forest will be committed to providing…