12179 F-16 Cradle and Jack Adapter Product Description - 10 Jun 24.pdf

Product Description/Technical Requirement Package (TRP) For Procurement of

CSL Cradle and Jack Adapter Fixtures 309th Aircraft Maintenance Group (AMXG)/573 AMXS (F-16)

10 Jun 2024

1. Requesting Agency

USAF, 309 AMXG/573 AMXS

Title: CSL Cradle and Jack Adapter Fixtures

2. Purpose The purpose of this requirement is to procure four (4) of F-16-15-009 Rev H drawing configuration and four (4) of X202123827 Rev D fixtures to be fabricated/manufactured and delivered to building 225 at Hill AFB, UT (eight (8) total units). The CSL Cradle and Jack Adapter fixtures are used to support the F-16 Aircraft during CSL Maintenance/Repair as part of SLEP at Hill Air Force Base (HAFB).

3. Technical Requirements Quantity: The Contractor shall provide four (4) of F-16-15-009 Rev H drawing configuration and four (4) of X202123827 Rev D fixtures. All DATA Rights and Drawing packages are the sole property of the USAF/309 AMXG/EN.

Quality: All items shall be clean of dirt, burrs, material shavings, cutting oil, etc. upon delivery and meet the requirements of F-16-15-009 Rev H and X202123827 Rev D.

Replacement / Repair of Defective Cradle and/or Jack Adapter Fixtures the contractor shall be responsible for replacement / repair defective parts or systems, the failure of which is due to faulty materials, workmanship, or design. The contractor shall provide replacement or repair to the depot within seven (7) business days. Shipping costs will be at the expense of the contractor. The contractor shall be responsible to dispose of damaged fixtures.

Consumables are expected to be excluded from this warranty requirement.

Changes: Only the Government Representative (GR) reserves the right to make changes to F-16- 15-009 Rev H and X202123827 Rev D drawing, scope, design, and configuration as required. No other alterations allowed without prior approval.

Drawings: Government contracting officer will issue drawing package upon request. A Solidworks 3D model file of the assembly and parts is also available upon request. The e-drawings viewer can be down-loaded free of charge from www.edrawingsviewer.com.

Non-Disclosure Agreement: Upon award of contract, awardee will be required to sign a non-disclosure agreement if any additional technical drawing package information, i.e. CAD data, is requested. The non-disclosure agreement is not inclusive for full release of all CAD data or proprietary information for the project. The requested additional technical information, if http://www.edrawingsviewer.com/ deemed required by GR, will be provided on a need-to-know basis.

The contractor shall ensure that all applicable Government-Off-The-Shelf (GOTS) and Commercial-Off-The-Shelf (COTS) IA and IA-enabled products comply with AFI 33-200, Information Assurance. Some of these products must be Committee on National Security Systems Policy 11 (CNSSP-11) compliant, requiring them to be validated by accredited labs under the National Information Assurance Partnership (NIAP) Common Criteria Evaluation and Validation Scheme or National Institute of Standards and Technology (NIST) Federal Information Processing Standards (FIPS) Cryptographic Module Validation Program (CMVP) as identified in the sections below.

3.1 Asset Tagging

Identify CSL Cradle and Jack Adapter Fixtures as specified per F-16-15-009 Rev H and X202123827 Rev D drawing configurations.

4. Ordering Table

Item Description Specifications/Standards Technical

Requirements Quantity

Cradle F-16-15-009 Rev H See drawing 4

Jack Adapter X202123827 Rev D See drawing 4

5. Technical Contractual Requirements (mandatory)

5.1 Trade Agreement Act (TAA)

Fabricated products and components used must be compliant with the Trade Agreements Act of 1979 (TAA) and related clauses in Section I of this contract. In accordance with DFARS 252.225-7021, the Trade Agreements Certificate at DFARS 252.225-7020 shall be provided for each end item defined and specified in a solicitation that exceeds the TAA threshold subject to the waivers and exceptions provided in FAR 25.4, and DFARS 225.4 offered in response to any RFQ issued under this contract.

All products and components used to fabricate/manufacturer The CSL Cradle and Jack Adapter fixtures must be TAA compliant, purchased from the original manufacturer or authorized reseller and are not developed or hosted in suspect countries.

6. Delivery Requirements

6.1 Timeframes

CSL Cradle and Jack Adapter fixtures shall be delivered no later than ninety (90) days from contract award.

6.2 Delivery Delays

Contractors are required to meet the timeframes as stated in section 6.1 unless Department of

Commerce approval and/or review activities prevent the contractor from meeting these timeframes. In the event that the contractor determines they are unable to achieve the stated timeframes, the contractor shall notify the Contracting Officer within two (2) business days of such determination, or immediately upon such determination if operating under the Emergency/War Tempo timelines.

Delivery: Trucks delivering fixtures / materials to Hill AFB must use the Roy gate for entry onto the base.

The contractor shall provide a list to the GR not less than 7 business days prior to the date access to HAFB is required. The list will be computer generated or typed and organized alphabetically by the visitor’s last name. The list will include last name, first name, driver’s license number, and state listed on license of all guests requiring access and will be escorted at all times within the flight line by an authorized GR.

For deliveries the contractor will have access granted during normal business hours of 0600 (6AM) – 1600 (4PM) Monday – Thursday.

6.3 Shipping Information

All products shall be shipped to:

Attn: Michael Wagoner, (801) 775-4972 5875 Southgate Ave Bldg. 225 Hill AFB, UT 84056

Inspection/Acceptance: The following Government officials are responsible for receiving the products and performing inspection:

Primary GR POC: Michael Wagoner, (801) 775-4972 Alt POC: Kirt Ehlers, (801) 586-3156

(end)