0169_-_RFQ.pdf

12034318Q0169 – RFQ

2018 Mechanized Trail Maintenance Custer Gallatin National Forest

12034318Q0169

Carbon, Park, and Gallatin Counties, Montana

Solicitation Issue Date: May 14, 2018

Method of Solicitation: Request for Quotation (RFQ).

This is a combined synopsis/solicitation for commercial item prepared in accordance with the format in Subpart

12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; quotations are being requested and a written solicitation will not be issued.

The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition

Circular 2005-97, dated January 24, 2018.

NAICS: 237990

Set Aside: 100% Total Small Business

General Information: The intent of this solicitation is to obtain quotes for Mechanized Trail Maintenance. See below for complete project description.

Provide Quotation by: May 31, 2018

Documents to Return:

o Schedule of Items o Experience Questionnaire – Which will be part of the evaluation for award.

o Acknowledgement of Amendments, if applicable.

Send completed Quotation to:

Physical: Dana Bangart, Contract Specialist

R1 AQM, East Side Acquisition Team

3710 Fallon Street, Suite C

Bozeman, MT 59714

Electronic: dbangart@fs.fed.us

For solicitation questions please contact Dana Bangart at 406-624-3442 or dbangart@fs.fed.us.

mailto:dbangart@fs.fed.us mailto:dbangart@fs.fed.us

SCHEDULE OF ITEMS

TOTAL: $_____________

Notes:

Equipment offered for this item is:

Make ____________________________ Model _______________ Year ___________ **

Make ____________________________ Model _______________ Year ___________ **

NOTE: ** Refer to Technical Specifications for requirements for equipment more than 8 years old.

ITEM

1.

Trail Restoration. Restore trail to original trail template, including clearing, removing slough, berm, rocks, roots, and stumps from tread and backslope, borrow, filling ruts and troughs, reshaping trail tread and backslope, and restoring, reshaping and cleaning drainage structures.

Linear foot by mechanical means.

32,900 LF

2.

Mini Compact Trail

Excavator Rental, one each, fully operated for use on the Gallatin

National Forest (Est.

May 15, 2018)

Maximum track width =

42”. Unless allowed by

COR. (See specifications)

50 HR

3.

Medium Compact Trail

Excavator Rental, one each, fully operated for use on the Gallatin

National Forest (Est.

May 15, 2018)

Maximum track width =

72”. Unless allowed by

COR. 6 way front dozer blade required. Thumb attachment on boom required. (See specifications)

30 HR

This is a Request for Quotation (RFQ); therefore, no public opening will be held. The results will not be made public prior to award. Quotes submitted in response to this RFQ will not be returned, but will be retained by the U.S. Forest Service for official record purposes. The RFQ does not commit the Government to pay any costs incurred in the preparation or the submission of this quote, or to make any award.

Vendor shall have a DUNS number and be registered in the System for Award Management (www.sam.gov) prior to award.

The Forest Service utilizes an electronic invoice system called Invoice Processing Platform (IPP). Awardee is required to set-up an account at www.ipp.gov in order to submit invoices.

Price Quotation furnished by:

Name: _______________________________ Phone: ____________________________

Address: ______________________________ Cell: ____________________________

______________________________ FAX: ____________________________

E-Mail: ________________________________ DUNS # ___________________________ http://www.ipp.gov/

DESCRIPTION/SPECIFICATIONS/STATEMENT OF WORK

SCOPE OF CONTRACT

This contract requires furnishing equipment on a fully operated basis, in good mechanical and operating condition and operated by competent operators, experienced in performing work of the nature required by this contract. The

Contracting Officer will require a brief resume, in the event the operator has not previously operated an excavator on the Custer Gallatin National Forest. The Contractor will provide all equipment, operating supplies, operators, supervision, and support functions necessary to perform the required work on a per linear foot and per hour basis.

DESCRIPTION

The work to be accomplished is associated with trail restoration and maintenance, which shall include but is not limited to, restoring trail to original trail template, including clearing, removing slough, berm, rocks, roots and stumps from tread and backslope, borrow, filling ruts and troughs, reshaping trail tread and backslope, grading, blading, and restoring, reshaping and cleaning drainage structures. Linear foot by mechanical means.

LOCATION

The work is located on various trails on the Custer Gallatin National Forest. Scheduled project work is planned on the motorized trails within the Pryor Mountain motorized trails, Boones Peak and Lodgepole motorcycle trails, Six Mile stock trails, North Rock creek trail, Cooke City ATV trails, Cinnamon/Buck motorycle trails, and the

Jardine area ski and hiking trails. Others may be added if work is accomplished ahead of schedule. The following is a list of work anticipated, to build or maintain trails under the contract. The list may be adjusted during the working period as priorities and conditions change.

Round 1

ITEM - FOREST NAME

ESTIMATED LINEAR FEET ESTIMATED HOURS

1. Custer Gallatin

2. Custer Gallatin

3. Custer Gallatin

32,900

TECHNICAL SPECIFICATIONS

Trail excavators furnished under this contract shall meet the following minimum specifications and equipment requirements.

Item #1 - Trail Restoration: Restore trail to original trail template, including clearing, removing slough, berm, rocks, roots, and stumps from trail tread and backslope, borrow, grading , blading, filling ruts and troughs, reshaping trail tread and backslope, and restoring, reshaping and cleaning drainage structures. Linear foot by mechanical means.

Item #2 - Mini Compact Trail Excavator: (Case CX17B or equivalent) Similar work to Item #1 above except in locations unanticipated. This will include winter and spring damage to single-track hiking and biking trails occuring after solicitation of this contract.

(a) Minimum Net Engine Horsepower: 14

(b) Maximum track width: 42”

(c) Tracks.

(d) Front dozer blade.

(e) minimum reach: 12’

(f) minimum dig depth: 7’

(g) Cab with rollover protection.

(h) Maximum Age: 8 years*>

Item #3 - Medium Compact Trail Excavator: (Kubota KX121-3S or equivalent) Similar work to Item #1 above except in locations unanticipated. This will include winter and spring damage to double-track motorized trails occuring after solicitation of this contract.

a) Minimum Net Engine Horsepower: 20

(b) Maximum track width: 78”

(c) Tracks.

(d) 6 way front dozer blade.

(e) minimum reach: 15’

(f) minimum dig depth: 8’

(g) Thumb attachment on boom.

(h) Cab with rollover protection.

(i) Maximum Age: 8 years*>

NOTE: *Equipment may be offered which exceeds the specified age, if:

(a) The bidder completed the equipment identification blocks on The

Schedule;

(b) The bidder secures an inspection by a qualified mechanic employed by factory authorized repair facility for warranty purposes or an authorized dealer, for the make of equipment being offered;

(c) The mechanic completes the Inspection Form (EXHIBIT B) and certifies that the equipment is in good operating and mechanical condition;

(d) The bidder must have submitted the completed inspection form as part of the bid in response to this Solicitation.

This inspection does not affect the Government's right to make additional inspections of the equipment or to contact the inspector concerning the inspection performed.

SAFETY REQUIREMENTS

(a) Contractor shall provide two signs stating "Machinery Ahead" with stands. Signs shall be a minimum of 36" x 36" in size with 6" black lettering on an orange background, reflectorized. Signs shall be in good condition and lettering shall be legible. Signs shall conform to U.S. Department of Transportation "Manual of

Uniform Traffic Control Devices" (MUTCD), sign W21-3. (See Exibit A). Signs shall be posted at the beginning and end of the daily work area before work begins. Signs shall be removed at the end of each work day, except as noted in paragraph (b).

(b) If a berm is left in a roadway overnight or weekends due to weather conditions or equipment breakdowns, the Contractor shall place a Type I barricade with an operable Type B illuminated warning light at each end of the berm and at maximum spacing intervals of 1000 feet. These devices shall conform to MUTCD

(see Exhibit A). If it is necessary to leave a berm in place over a weekend, the Contractor shall notify the COR or inspector within 3 hours of the cause.

SOIL MOISTURE

Equipment use may be suspended when soil moisture conditions are not favorable for obtaining a satisfactory result. Suitable moisture conditions are determined to be in excess of five percent and less than 15 percent by weight of the material being bladed unless otherwise authorized by the COR.

ADDITIONAL INSPECTION AND ACCEPTANCE REQUIREMENTS

(a) Inspection of Equipment. Equipment will be inspected at the time it is delivered to the worksite.

equipment that does not meet contract specifications and requirements shall be rejected.

(b) Rejected and Replacement Equipment. If equipment is rejected for non-compliance with the specifications, the Contractor will be notified in writing to correct the deficiencies or furnish replacement equipment meeting specifications within two calendar days. If accepted equipment becomes inoperative, the Contractor shall be required to correct the deficiencies within two calendar days. Failure to repair or replace the equipment in the two calendar days may result in the termination of the Contractor's right to proceed. If accumulated down-time due to equipment breakdown exceeds 10 percent of the working days for that item the Contractor's right to proceed may be terminated.

(c) Dependent Equipment. If any piece of equipment becomes inoperative and prevents a dependent piece of equipment from doing productive work, then no payment will be made for any dependent equipment until affected equipment resumes operation. However, authorized time for all equipment shall apply towards meeting the hours shown in the Schedule of Items. In the event of award to more than one Contractor, this clause will not be applicable to dependent equipment belonging to another Contractor.

PERFORMANCE PERIOD REQUIREMENTS

Contract Time. Contract time will begin on the effective date of the Notice to Proceed. It shall continue (1) for the period of time listed below; (2) until completion of the work contemplated by the Government; or (3) until closure of the work season because of moisture or other weather conditions, whichever is sooner. The

Contracting Officer will determine when the work season is closed. It is anticipated that the notice to proceed will be issued as follows:

Item No. Estimated Starting Date* Working Days

1 May 15, 2018 45 days non-continuous thru

10/30/18

* Actual starting dates will vary depending on scheduling, weather, and road conditions.

The working days shown are sufficient to accomplish the estimated hours of work plus an allowance of approximately 15 percent for lost time due to weather, breakdown, being stuck, and other problems. In the event the Contractor fails to accomplish the estimated hours of work within the working days, and a need for the equipment still exists, the Government may allow the contract time to continue.

(b) Days and Hours of Work. The work is to be accomplished Monday through Friday, five days per week, ten hours per day. The workday shall be between the hours of 7:00 a.m. and 6:00 p.m., but the operating time shall not exceed ten hours during any one day. This schedule may be altered by mutual agreement during the contract period. Contractor shall notify the COR one week in advance of any request for any significant alteration.

(c) Point of Hire and Release.

Item No. POINT-OF-HIRE POINT-OF RELEASE

1 and 2 GNF Supervisors Office

Bozeman, Montana

Same as Point of Hire

METHOD OF MEASUREMENT

An hour consists of 60 minutes of actual operation of equipment on authorized Government work. Moving of equipment under its own power, when so ordered by the Contracting Officer, will constitute authorized work.

Nonproductive time such as, but not restricted to, lack of operating supplies or qualified operator, service time, time lost by reason of breakdown or being stuck, or loading time of specified accessories shall not constitute

"actual operation."

(a) Move-in/Move-out. The move-in/move-out allowance will be paid as specified in the Schedule of Items, for moving all fully operated equipment, support equipment, and personnel to the point of hire, complete and ready to work, and from the point of release. No move-in will be paid for replacement equipment. Payment for move-in/move-out allowance will be at a rate of half the lump sum with the first partial payment and half the lump sum with the final payment.

(b) Moving Between Job Locations and Standby. Moving of equipment and specified accessories between job locations shall be at Government expense and paid for at the hourly rate. Moving of support equipment and personnel between job locations shall be at Contractor's expense.

DAILY RECORD

The Government will maintain a daily record for each piece of equipment showing:

(a) Contract number and bid item number applicable to the equipment.

(b) Name of Contractor

(c) Hours of operation authorized for payment to nearest quarter hour.

(d) Hours of actual operation will be maintained by Forest Service COR or inspector. Payments will be based on COR and/or inspector's records.

(e) Authorized hours of operation lost and reason.

BASIS OF PAYMENT

The daily record will constitute the basis for calculating the sum due the Contractor. Contractor shall submit and invoice for payment at the end of each 15 calendar day period. Payment due the Contractor at the end of each 15 calendar day period will be made as soon after the close of the period as practicable.

NOXIOUS WEED CONTROL

This project lies within a weed management district, which is any area of land identified for the purpose of weed management or control. Such an identified land area may be, but is not limited to, one of the following: 1) a project or job site, 2) a county, 3) two or more counties, or 4) a National Forest.

Noxious weeds are defined as any exotic plant species established or that may be introduced in the State which may render land unfit for agriculture, forestry, livestock, wildlife, or other beneficial uses and which is designated by the State Department of Agriculture, or by the County Weed Management District, or by other appropriate agencies having jurisdiction.

All equipment, materials, and vehicles to be used at the job site shall be cleaned and certified free of noxious weeds and their seeds prior to entrance onto Federal lands.

Cleaning shall consist of the removal of all dirt, grease, debris, and materials that may harbor noxious weeds and their seeds. Cleaning shall occur off Federal lands prior to entering the weed management district.

Equipment, materials, and vehicles will be visually inspected by the Contracting Officer's Representative (COR) or other designated Forest Service official, and certified in writing to be reasonably clean and weed free.

Inspections will take place at a location designated by the COR or other official. Equipment and vehicles shall proceed directly to the job site following the inspections. Materials, including delivery vehicle(s), delivered to the project site will also be inspected prior to entering the weed management district.

Certification will remain valid for each identified piece of equipment or vehicle only for the duration of the specified project and only as long as the vehicle or equipment remains at the job site or within the designated weed management district. Equipment and vehicles that leave the designated area will need to be recertified as weed free before they are allowed to return to the job site or reenter the weed management district.

LOSS, DAMAGE, OR DESTRUCTION

(a) Equipment furnished without operator. The Government will assume liability for the loss, damage, or destruction of equipment furnished under this contract, provided that no reimbursement will be made for loss, damage, or destruction when due to (1) ordinary wear and tear, (2) mechanical failure, or (3) the fault or negligence of the Contractor or his agents.

(b) Equipment furnished with operator. The Government shall not be liable for loss, damage, or destruction of equipment furnished under this contract except for such loss, damage, or destruction resulting from the negligent or wrongful act(s) of Government employee(s) while acting within the scope of their employment.

All claims arising under this clause will be submitted to the Contracting Officer.

LANDSCAPE PRESERVATION

(a) The Contractor shall confine operations to within the clearing limits or other areas designated in contract documents, and prevent the depositing of rocks, excavated materials, stumps, or other debris outside of these limits. Material which falls outside of these limits shall be retrieved, disposed of, or incorporated in the work as directed by the Contracting Officer.

(b) Operation shall be scheduled and conducted to minimize erosion of soils and to prevent silting and muddying of streams, rivers, irrigation systems, and impoundments (lakes, reservoirs, etc.).

Pollutants such as fuels, lubricants, bitumens, raw sewage, and other harmful materials shall not be discharged into or near rivers, streams, and impoundments or into natural or man-made channels leading thereto. Wash water or waste water from concrete or aggregate operations shall not be allowed to enter live streams prior to treatment by filtration, settling, or other means sufficient to reduce the sediment content to not more than that of the stream into which it is discharged.

Mechanized equipment shall not be operated in live streams without written approval by the Contracting Officer.

CONTRACT CLAUSES

52.252-2 -- Clauses Incorporated by Reference. (Feb 1998)

This contract incorporates one or more clauses by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. Also, the full text of a clause may be accessed electronically at this/these address(es):

http://farsite.hill.af.mil/

(End of Clause)

52.212-4 -- Contract Terms and Conditions -- Commercial Items. (Jan 2017)

52.212-5 -- Contract Terms and Conditions Required to Implement Statutes or Executive Orders --

Commercial Items. (Jan 2018)

(a) The Contractor shall comply with the following Federal Acquisition Regulation (FAR) clauses, which are incorporated in this contract by reference, to implement provisions of law or Executive orders applicable to acquisitions of commercial items:

(1) 52.203-19, Prohibition on Requiring Certain Internal Confidentiality Agreements or Statements (Jan

2017) (section 743 of Division E, Title VII, of the Consolidated and Further Continuing Appropriations

Act 2015 (Pub. L. 113-235) and its successor provisions in subsequent appropriations acts (and as extended in continuing resolutions)).

(2) 52.209-10, Prohibition on Contracting with Inverted Domestic Corporations (Nov 2015)

(3) 52.233-3, Protest After Award (AUG 1996) (31 U.S.C. 3553).

(4) 52.233-4, Applicable Law for Breach of Contract Claim (OCT 2004) (Public Laws 108-77, 108-78

(19 U.S.C. 3805 note)).

(b) The Contractor shall comply with the FAR clauses in this paragraph (b) that the contracting officer has indicated as being incorporated in this contract by reference to implement provisions of law or Executive orders applicable to acquisitions of commercial items:

[Contracting Officer check as appropriate.]

___ (1) 52.203-6, Restrictions on Subcontractor Sales to the Government (Sept 2006), with Alternate I

(Oct 1995) (41 U.S.C. 4704 and 10 U.S.C. 2402).

___ (2) 52.203-13, Contractor Code of Business Ethics and Conduct (Oct 2015) (41 U.S.C. 3509).

___ (3) 52.203-15, Whistleblower Protections under the American Recovery and Reinvestment Act of

2009 (Jun 2010) (Section 1553 of Pub L. 111-5) (Applies to contracts funded by the American Recovery and Reinvestment Act of 2009).

___ (4) 52.204-10, Reporting Executive compensation and First-Tier Subcontract Awards (Oct 2016)

(Pub. L. 109-282) (31 U.S.C. 6101 note).

http://farsite.hill.af.mil/

___ (5) [Reserved]

___ (6) 52.204-14, Service Contract Reporting Requirements (Oct 2016) (Pub. L. 111-117, section 743 of

Div. C).

___ (7) 52.204-15, Service Contract Reporting Requirements for Indefinite-Delivery Contracts (Oct

2016) (Pub. L. 111-117, section 743 of Div. C).

_x__ (8) 52.209-6, Protecting the Government’s Interest When Subcontracting with Contractors

Debarred, Suspended, or Proposed for Debarment (Oct 2015) (31 U.S.C. 6101 note).

___ (9) 52.209-9, Updates of Publicly Available Information Regarding Responsibility Matters (Jul 2013)

(41 U.S.C. 2313).

___ (10) [Reserved]

___ (11) (i) 52.219-3, Notice of HUBZone Set-Aside or Sole-Source Award (Nov 2011) (15 U.S.C.

657a).

___ (ii) Alternate I (Nov 2011) of 52.219-3.

___ (12) (i) 52.219-4, Notice of Price Evaluation Preference for HUBZone Small Business Concerns (Oct

2014) (if the offeror elects to waive the preference, it shall so indicate in its offer)(15 U.S.C. 657a).

___ (ii) Alternate I (Jan 2011) of 52.219-4.

___ (13) [Reserved]

_x__ (14) (i) 52.219-6, Notice of Total Small Business Aside (Nov 2011) (15 U.S.C. 644).

___ (ii) Alternate I (Nov 2011).

___ (iii) Alternate II (Nov 2011).

___ (15) (i) 52.219-7, Notice of Partial Small Business Set-Aside (June 2003) (15 U.S.C. 644).

___ (ii) Alternate I (Oct 1995) of 52.219-7.

___ (iii) Alternate II (Mar 2004) of 52.219-7.

___ (16) 52.219-8, Utilization of Small Business Concerns (Nov 2016) (15 U.S.C. 637(d)(2) and (3)).

___ (17) (i) 52.219-9, Small Business Subcontracting Plan (Jan 2017) (15 U.S.C. 637 (d)(4)).

___ (ii) Alternate I (Nov 2016) of 52.219-9.

___ (iii) Alternate II (Nov 2016) of 52.219-9.

___ (iv) Alternate III (Nov 2016) of 52.219-9.

___ (v) Alternate IV (Nov 2016) of 52.219-9.

___ (18) 52.219-13, Notice of Set-Aside of Orders (Nov 2011) (15 U.S.C. 644(r)).

___ (19) 52.219-14, Limitations on Subcontracting (Jan 2017) (15 U.S.C. 637(a)(14)).

___ (20) 52.219-16, Liquidated Damages—Subcontracting Plan (Jan 1999) (15 U.S.C. 637(d)(4)(F)(i)).

___ (21) 52.219-27, Notice of Service-Disabled Veteran-Owned Small Business Set-Aside (Nov 2011)

(15 U.S.C. 657f).

_x__ (22) 52.219-28, Post Award Small Business Program Rerepresentation (Jul 2013) (15 U.S.C.

632(a)(2)).

___ (23) 52.219-29, Notice of Set-Aside for, or Sole Source Award to, Economically Disadvantaged

Women-Owned Small Business Concerns (Dec 2015) (15 U.S.C. 637(m)).

___ (24) 52.219-30, Notice of Set-Aside for, or Sole Source Award to, Women-Owned Small Business

Concerns Eligible Under the Women-Owned Small Business Program (Dec 2015) (15 U.S.C. 637(m)).

_x__ (25) 52.222-3, Convict Labor (June 2003) (E.O. 11755).

___ (26) 52.222-19, Child Labor—Cooperation with Authorities and Remedies (Jan 2018) (E.O. 13126).

_x__ (27) 52.222-21, Prohibition of Segregated Facilities (Apr 2015).

_x__ (28) 52.222-26, Equal Opportunity (Sep 2016) (E.O. 11246).

___ (29) 52.222-35, Equal Opportunity for Veterans (Oct 2015) (38 U.S.C. 4212).

_x__ (30) 52.222-36, Equal Opportunity for Workers with Disabilities (Jul 2014) (29 U.S.C. 793).

___ (31) 52.222-37, Employment Reports on Veterans (Feb 2016) (38 U.S.C. 4212).

___ (32) 52.222-40, Notification of Employee Rights Under the National Labor Relations Act (Dec 2010)

(E.O. 13496).

_x__ (33) (i) 52.222-50, Combating Trafficking in Persons (Mar 2015) (22 U.S.C. chapter 78 and E.O.

13627).

___ (ii) Alternate I (Mar 2015) of 52.222-50, (22 U.S.C. chapter 78 and E.O. 13627).

___ (34) 52.222-54, Employment Eligibility Verification (Oct 2015). (E. O. 12989). (Not applicable to the acquisition of commercially available off-the-shelf items or certain other types of commercial items as prescribed in 22.1803.)

___ (35) (i) 52.223-9, Estimate of Percentage of Recovered Material Content for EPA-Designated Items

(May 2008) (42 U.S.C. 6962(c)(3)(A)(ii)). (Not applicable to the acquisition of commercially available off-the-shelf items.)

___ (ii) Alternate I (May 2008) of 52.223-9 (42 U.S.C. 6962(i)(2)(C)). (Not applicable to the acquisition of commercially available off-the-shelf items.)

___ (36) 52.223-11, Ozone-Depleting Substances and High Global Warming Potential

Hydrofluorocarbons (Jun 2016) (E.O.13693).

___ (37) 52.223-12, Maintenance, Service, Repair, or Disposal of Refrigeration Equipment and Air

Conditioners (Jun 2016) (E.O. 13693).

___ (38) (i) 52.223-13, Acquisition of EPEAT® -Registered Imaging Equipment (Jun 2014) (E.O.s 13423 and 13514

___ (ii) Alternate I (Oct 2015) of 52.223-13.

___ (39) (i) 52.223-14, Acquisition of EPEAT® -Registered Television (Jun 2014) (E.O.s 13423 and

13514).

___ (ii) Alternate I (Jun 2014) of 52.223-14.

___ (40) 52.223-15, Energy Efficiency in Energy-Consuming Products (Dec 2007) (42 U.S.C. 8259b).

___ (41) (i) 52.223-16, Acquisition of EPEAT® -Registered Personal Computer Products (Oct 2015)

(E.O.s 13423 and 13514).

___ (ii) Alternate I (Jun 2014) of 52.223-16.

_x__ (42) 52.223-18, Encouraging Contractor Policies to Ban Text Messaging while Driving (Aug 2011)

(E.O. 13513).

___ (43) 52.223-20, Aerosols (Jun 2016) (E.O. 13693).

___ (44) 52.223-21, Foams (Jun 2016) (E.O. 13696).

___ (45) (i) 52.224-3, Privacy Training (Jan 2017) (5 U.S.C. 552a).

___ (ii) Alternate I (Jan 2017) of 52.224-3.

_x__ (46) 52.225-1, Buy American--Supplies (May 2014) (41 U.S.C. chapter 83).

___ (47) (i) 52.225-3, Buy American--Free Trade Agreements--Israeli Trade Act (May 2014) (41 U.S.C.

chapter 83, 19 U.S.C. 3301 note, 19 U.S.C. 2112 note, 19 U.S.C. 3805 note, 19 U.S.C. 4001 note, Pub. L.

103-182, 108-77, 108-78, 108-286, 108-302, 109-53, 109-169, 109-283, 110-138, 112-41, 112-42, and

112-43).

___ (ii) Alternate I (May 2014) of 52.225-3.

___ (iii) Alternate II (May 2014) of 52.225-3.

___ (iv) Alternate III (May 2014) of 52.225-3.

___ (48) 52.225-5, Trade Agreements (Oct 2016) (19 U.S.C. 2501, et seq., 19 U.S.C. 3301 note).

_x__ (49) 52.225-13, Restrictions on Certain Foreign Purchases (Jun 2008) (E.O.’s, proclamations, and statutes administered by the Office of Foreign Assets Control of the Department of the Treasury).

___ (50) 52.225-26, Contractors Performing Private Security Functions Outside the United States (Oct

2016) (Section 862, as amended, of the National Defense Authorization Act for Fiscal Year 2008; 10

U.S.C. 2302 Note).

___ (51) 52.226-4, Notice of Disaster or Emergency Area Set-Aside (Nov 2007) (42 U.S.C. 5150).

___ (52) 52.226-5, Restrictions on Subcontracting Outside Disaster or Emergency Area (Nov 2007) (42

U.S.C. 5150).

___ (53) 52.232-29, Terms for Financing of Purchases of Commercial Items (Feb 2002) (41 U.S.C.

4505), 10 U.S.C. 2307(f)).

___ (54) 52.232-30, Installment Payments for Commercial Items (Jan 2017) (41 U.S.C. 4505, 10 U.S.C.

2307(f)).

_x__ (55) 52.232-33, Payment by Electronic Funds Transfer— System for Award Management (Jul

2013) (31 U.S.C. 3332).

___ (56) 52.232-34, Payment by Electronic Funds Transfer—Other Than System for Award Management

(Jul 2013) (31 U.S.C. 3332).

___ (57) 52.232-36, Payment by Third Party (May 2014) (31 U.S.C. 3332).

___ (58) 52.239-1, Privacy or Security Safeguards (Aug 1996) (5 U.S.C. 552a).

___ (59) 52.242-5, Payments to Small Business Subcontractors (Jan 2017) (15 U.S.C. 637(d)(12)).

___ (60) (i) 52.247-64, Preference for Privately Owned U.S.-Flag Commercial Vessels (Feb 2006) (46

U.S.C. Appx 1241(b) and 10 U.S.C. 2631).

___ (ii) Alternate I (Apr 2003) of 52.247-64.

(c) The Contractor shall comply with the FAR clauses in this paragraph (c), applicable to commercial services, that the Contracting Officer has indicated as being incorporated in this contract by reference to implement provisions of law or executive orders applicable to acquisitions of commercial items:

[Contracting Officer check as appropriate.]

___ (1) 52.222-17, Nondisplacement of Qualified Workers (May 2014) (E.O. 13495)

_x__ (2) 52.222-41, Service Contract Labor Standards (May 2014) (41 U.S.C. chapter 67.).

_x__ (3) 52.222-42, Statement of Equivalent Rates for Federal Hires (May 2014) (29 U.S.C. 206 and 41

U.S.C. chapter 67).

This Statement is for Information Only: It is not a Wage Determination.

Employee Class: WG 4/6, WG 5/6

Monetary Wage: $22.83, $23.66

___ (4) 52.222-43, Fair Labor Standards Act and Service Contract Labor Standards -- Price Adjustment

(Multiple Year and Option Contracts) (May 2014) (29 U.S.C.206 and 41 U.S.C. chapter 67).

___ (5) 52.222-44, Fair Labor Standards Act and Service Contract Labor Standards -- Price Adjustment

(May 2014) (29 U.S.C. 206 and 41 U.S.C. chapter 67).

___ (6) 52.222-51, Exemption from Application of the Service Contract Labor Standards to Contracts for

Maintenance, Calibration, or Repair of Certain Equipment--Requirements (May 2014) (41 U.S.C. chapter

67).

___ (7) 52.222-53, Exemption from Application of the Service Contract Labor Standards to Contracts for

Certain Services--Requirements (May 2014) (41 U.S.C. chapter 67).

_x__ (8) 52.222-55, Minimum Wages Under Executive Order 13658 (Dec 2015) (E.O. 13658).

_x__ (9) 52.222-62, Paid Sick Leave Under Executive Order 13706 (JAN 2017) (E.O. 13706).

___ (10) 52.226-6, Promoting Excess Food Donation to Nonprofit Organizations. (May 2014) (42 U.S.C.

1792).

___ (11) 52.237-11, Accepting and Dispensing of $1 Coin (Sep 2008) (31 U.S.C. 5112(p)(1)).

(d) Comptroller General Examination of Record The Contractor shall comply with the provisions of this paragraph (d) if this contract was awarded using other than sealed bid, is in excess of the simplified acquisition threshold, and does not contain the clause at 52.215-2, Audit and Records -- Negotiation.

(1) The Comptroller General of the United States, or an authorized representative of the Comptroller

General, shall have access to and right to examine any of the Contractor’s directly pertinent records involving transactions related to this contract.

(2) The Contractor shall make available at its offices at all reasonable times the records, materials, and other evidence for examination, audit, or reproduction, until 3 years after final payment under this contract or for any shorter period specified in FAR Subpart 4.7, Contractor Records Retention, of the other clauses of this contract. If this contract is completely or partially terminated, the records relating to the work terminated shall be made available for 3 years after any resulting final termination settlement.

Records relating to appeals under the disputes clause or to litigation or the settlement of claims arising under or relating to this contract shall be made available until such appeals, litigation, or claims are finally resolved.

(3) As used in this clause, records include books, documents, accounting procedures and practices, and other data, regardless of type and regardless of form. This does not require the Contractor to create or maintain any record that the Contractor does not maintain in the ordinary course of business or pursuant to a provision of law.

(e)

(1) Notwithstanding the requirements of the clauses in paragraphs (a), (b), (c) and (d) of this clause, the

Contractor is not required to flow down any FAR clause, other than those in this paragraph (e)(1) in a subcontract for commercial items. Unless otherwise indicated below, the extent of the flow down shall be as required by the clause—

(i) 52.203-13, Contractor Code of Business Ethics and Conduct (Oct 2015) (41 U.S.C. 3509).

(ii) 52.203-19, Prohibition on Requiring Certain Internal Confidentiality Agreements or

Statements (Jan 2017) (section 743 of Division E, Title VII, of the Consolidated and Further

Continuing Appropriations Act, 2015 (Pub. L. 113-235) and its successor provisions in subsequent appropriations acts (and as extended in continuing resolutions)).

(iii) 52.219-8, Utilization of Small Business Concerns (Nov 2016) (15 U.S.C. 637(d)(2) and (3)), in all subcontracts that offer further subcontracting opportunities. If the subcontract (except subcontracts to small business concerns) exceeds $700,000 ($1.5 million for construction of any public facility), the subcontractor must include 52.219-8 in lower tier subcontracts that offer subcontracting opportunities.

(iv) 52.222-17, Nondisplacement of Qualified Workers (May 2014) (E.O. 13495). Flow down required in accordance with paragraph (1) of FAR clause 52.222-17.

(v) 52.222-21, Prohibition of Segregated Facilities (Apr 2015).

(vi) 52.222-26, Equal Opportunity (Sep 2016) (E.O. 11246).

(vii) 52.222-35, Equal Opportunity for Veterans (Oct 2015) (38 U.S.C. 4212).

(viii) 52.222-36, Equal Opportunity for Workers with Disabilities (Jul 2014) (29 U.S.C. 793).

(ix) 52.222-37, Employment Reports on Veterans (Feb 2016) (38 U.S.C. 4212).

(x) 52.222-40, Notification of Employee Rights Under the National Labor Relations Act (Dec

2010) (E.O. 13496). Flow down required in accordance with paragraph (f) of FAR clause 52.222-

40.

(xi) 52.222-41, Service Contract Labor Standards (May 2014), (41 U.S.C. chapter 67).

(xii) (A) 52.222-50, Combating Trafficking in Persons (Mar 2015) (22 U.S.C. chapter 78 and

E.O. 13627).

(B) Alternate I (Mar 2015) of 52.222-50 (22 U.S.C. chapter 78 E.O. 13627).

(xiii) 52.222-51, Exemption from Application of the Service Contract Labor Standards to

Contracts for Maintenance, Calibration, or Repair of Certain Equipment--Requirements (May

2014) (41 U.S.C. chapter 67.)

(xiv) 52.222-53, Exemption from Application of the Service Contract Labor Standards to

Contracts for Certain Services--Requirements (May 2014) (41 U.S.C. chapter 67)

(xv) 52.222-54, Employment Eligibility Verification (Oct 2015) (E. O. 12989).

(xvi) 52.222-55, Minimum Wages Under Executive Order 13658 (Dec 2015).

(xvii) 52.222-62, Paid sick Leave Under Executive Order 13706 (JAN 2017) (E.O. 13706).

(xviii) (A) 52.224-3, Privacy Training (Jan 2017) (5 U.S.C. 552a).

(B) Alternate I (Jan 2017) of 52.224-3.

(xix) 52.225-26, Contractors Performing Private Security Functions Outside the United States

(Oct 2016) (Section 862, as amended, of the National Defense Authorization Act for Fiscal Year

2008; 10 U.S.C. 2302 Note).

(xx) 52.226-6, Promoting Excess Food Donation to Nonprofit Organizations. (May 2014) (42

U.S.C. 1792). Flow down required in accordance with paragraph (e) of FAR clause 52.226-6.

(xxi) 52.247-64, Preference for Privately-Owned U.S. Flag Commercial Vessels (Feb 2006) (46

U.S.C. Appx 1241(b) and 10 U.S.C. 2631). Flow down required in accordance with paragraph (d) of FAR clause 52.247-64.

(2) While not required, the Contractor may include in its subcontracts for commercial items a minimal number of additional clauses necessary to satisfy its contractual obligations.

(End of Clause)

12.301(d) – Solicitation provisions and contract clauses for the acquisition of commercial items.

___ (1) 52.204-16, Commercial and Government Entity Code Reporting, when there is a requirement to be registered in SAM or a requirement to have a unique entity identifier in the solicitation.

___ (2) 52.204-18, Commercial and Government Entity Code Maintenance, when there is a requirement to be registered in SAM or a requirement to have a unique entity identifier in the solicitation.

___ (3) 52.204-21, Basic Safeguarding of Covered Contractor Information Systems, in solicitations and contracts (except for acquisition of COTS items.

___ (4) 52.207-6, Solicitation of Offers from Small Business Concerns and Small Business

Teaming Arrangements or Joint Ventures (Multiple-Award Contracts.

http://farsite.hill.af.mil/reghtml/regs/far2afmcfars/fardfars/far/52_000.htm#P822_120057 http://farsite.hill.af.mil/reghtml/regs/far2afmcfars/fardfars/far/52_000.htm#P857_125589 http://farsite.hill.af.mil/reghtml/regs/far2afmcfars/fardfars/far/52_000.htm#P889_130330

___ (5) 52.209-7, Information Regarding Responsibility Matters.

___ (6) 52.209-12, Certification Regarding Tax Matters.

___ (7) 52.222-56, Certification Regarding Trafficking in Persons Compliance Plan.

___ (8) 52.225-19, Contractor Personnel in a Designated Operational Area or Supporting a

Diplomatic or Consular Mission outside the United States.

_x__ (9) 52.232-40, Providing Accelerated Payments to Small Business subcontractors.

52.223-2 -- Affirmative Procurement of Biobased Products Under Service And Construction

Contracts. (Sep 2013)

452.211-74 – Period of Performance. (Feb 1988)

The period of performance of this contract is from the time of award through October 30, 2018.

(End of Clause)

LIST OF DOCUMENTS, EXHIBITS, AND OTHER ATTACHMENTS

Attachment 1: Service Contract Labor Standards Wage Determinations, 2015-5389, Revision 5, dated

01/10/2018 and 2015-5399, Revision 5, dated 01/10/2018

Attachment 2: Experience Questionnaire

Attachment 3: Exhibit A Warning Signs Example

Attachment 4: Exhibit B Vehicle/Heavy Equipment Inspection Checklist

Attachment 5: Project Trail List http://farsite.hill.af.mil/reghtml/regs/far2afmcfars/fardfars/far/52_000.htm#P1196_176556 http://farsite.hill.af.mil/reghtml/regs/far2afmcfars/fardfars/far/52_000.htm#P1258_186591 http://farsite.hill.af.mil/reghtml/regs/far2afmcfars/fardfars/far/52_220.htm#P1108_201614 http://farsite.hill.af.mil/reghtml/regs/far2afmcfars/fardfars/far/52_220.htm#P2177_342562 http://farsite.hill.af.mil/reghtml/regs/far2afmcfars/fardfars/far/52_232.htm#P1133_205570

SOLICITATION PROVISIONS

52.252-1 -- Solicitation Provisions Incorporated by Reference. (Feb 1998)

This solicitation incorporates one or more solicitation provisions by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. The offeror is cautioned that the listed provisions may include blocks that must be completed by the offeror and submitted with its quotation or offer. In lieu of submitting the full text of those provisions, the offeror may identify the provision by paragraph identifier and provide the appropriate information with its quotation or offer. Also, the full text of a solicitation provision may be accessed electronically at this/these address(es):

http://farsite.hill.af.mil/

52.216-1 -- Type of Contract. (Apr 1984)

The Government contemplates award of a firm-fixed priced contract resulting from this solicitation.

52.223-1 -- Biobased Product Certification. (May 2012)

452.204-70 – Inquires. (Feb 1988)

EVALUATION FOR AWARD

Award Determination

Award will be made to the respondent whose quote represents the best value to the government. Factors to be considered in determining the best value include such matters as price, experience and past performance.

Evaluation Factors

Experience and Past Performance, when combined are of equal importance to Price; however, the importance of

Price may become greater as the differences in Experience and Past Performance decrease. Where Experience and

Past Performance in Mechanized Trail Maintenance, are determined to be substantially equal, price may control the award.

http://farsite.hill.af.mil/

Attachment 1:

Service Contract Labor Standards Wage Determination, 2015-5389, Revision 5, dated 01/10/2018

WD 15-5389 (Rev.-5) was first posted on www.wdol.gov on 01/16/2018

REGISTER OF WAGE DETERMINATIONS UNDER | U.S. DEPARTMENT OF LABOR

THE SERVICE CONTRACT ACT | EMPLOYMENT STANDARDS ADMINISTRATION

By direction of the Secretary of Labor | WAGE AND HOUR DIVISION

| WASHINGTON D.C. 20210

| Wage Determination No.: 2015-5389

Daniel W. Simms Division of | Revision No.: 5

Director Wage Determinations| Date Of Revision: 01/10/2018

Note: Under Executive Order (EO) 13658, an hourly minimum wage of $10.35 for calendar year 2018 applies to all contracts subject to the Service Contract

Act for which the contract is awarded (and any solicitation was issued) on or after January 1, 2015. If this contract is covered by the EO, the contractor must pay all workers in any classification listed on this wage determination at least $10.35 per hour (or the applicable wage rate listed on this wage determination, if it is higher) for all hours spent performing on the contract in calendar year 2018. The EO minimum wage rate will be adjusted annually.

Additional information on contractor requirements and worker protections under the EO is available at www.dol.gov/whd/govcontracts

State: Montana

Area: Montana Counties of Carbon, Golden Valley, Yellowstone

**Fringe Benefits Required Follow the Occupational Listing**

OCCUPATION CODE - TITLE FOOTNOTE RATE

01000 - Administrative Support And Clerical Occupations

01011 - Accounting Clerk I 13.00

01012 - Accounting Clerk II 14.60

01013 - Accounting Clerk III 16.33

01020 - Administrative Assistant 20.42

01035 - Court Reporter 16.84

01041 - Customer Service Representative I 11.51

01042 - Customer Service Representative II 12.94

01043 - Customer Service Representative III 14.12

01051 - Data Entry Operator I 13.11

01052 - Data Entry Operator II 14.31

01060 - Dispatcher, Motor Vehicle 18.42

01070 - Document Preparation Clerk 13.40

01090 - Duplicating Machine Operator 13.40

01111 - General Clerk I 12.62

01112 - General Clerk II 13.77

01113 - General Clerk III 15.46

01120 - Housing Referral Assistant 18.76

01141 - Messenger Courier 11.61

01191 - Order Clerk I 13.10

01192 - Order Clerk II 14.30

01261 - Personnel Assistant (Employment) I 14.25

01262 - Personnel Assistant (Employment) II 15.94

01263 - Personnel Assistant (Employment) III 17.76

01270 - Production Control Clerk 20.33

01290 - Rental Clerk 12.32

01300 - Scheduler, Maintenance 14.50

01311 - Secretary I 14.50

01312 - Secretary II 16.21

01313 - Secretary III 18.76

01320 - Service Order Dispatcher 17.40

01410 - Supply Technician 20.42

01420 - Survey Worker 15.42

01460 - Switchboard Operator/Receptionist 13.26

01531 - Travel Clerk I 11.90

01532 - Travel Clerk II 12.76

01533 - Travel Clerk III 13.59

01611 - Word Processor I 13.40

01612 - Word Processor II 15.05

01613 - Word Processor III 16.84

05000 - Automotive Service Occupations

05005 - Automobile Body Repairer, Fiberglass 19.28

05010 - Automotive Electrician 17.67

05040 - Automotive Glass Installer 16.50

05070 - Automotive Worker 16.50

05110 - Mobile Equipment Servicer 14.29

05130 - Motor Equipment Metal Mechanic 18.78

05160 - Motor Equipment Metal Worker 16.50

05190 - Motor Vehicle Mechanic 18.78

05220 - Motor Vehicle Mechanic Helper 13.14

05250 - Motor Vehicle Upholstery Worker 15.39

05280 - Motor Vehicle Wrecker 16.50

05310 - Painter, Automotive 17.67

05340 - Radiator Repair Specialist 16.50

05370 - Tire Repairer 12.99

05400 - Transmission Repair Specialist 18.78

07000 - Food Preparation And Service Occupations

07010 - Baker 12.58

07041 - Cook I 12.04

07042 - Cook II 13.91

07070 - Dishwasher 9.21

07130 - Food Service Worker 9.83

07210 - Meat Cutter 14.43

07260 - Waiter/Waitress 9.11

09000 - Furniture Maintenance And Repair Occupations

09010 - Electrostatic Spray Painter 15.96

09040 - Furniture Handler 11.23

09080 - Furniture Refinisher 15.96

09090 - Furniture Refinisher Helper 12.70

09110 - Furniture Repairer, Minor 14.21

09130 - Upholsterer 15.96

11000 - General Services And Support Occupations

11030 - Cleaner, Vehicles 10.86

11060 - Elevator Operator 12.19

11090 - Gardener 14.76

11122 - Housekeeping Aide 12.19

11150 - Janitor 12.19

11210 - Laborer, Grounds Maintenance 11.50

11240 - Maid or Houseman 10.51

11260 - Pruner 10.29

11270 - Tractor Operator 13.64

11330 - Trail Maintenance Worker 11.50

11360 - Window Cleaner 13.63

12000 - Health Occupations

12010 - Ambulance Driver 15.07

12011 - Breath Alcohol Technician 17.68

12012 - Certified Occupational Therapist Assistant 20.52

12015 - Certified Physical Therapist Assistant 20.48

12020 - Dental Assistant 17.88

12025 - Dental Hygienist 35.21

12030 - EKG Technician 26.94

12035 - Electroneurodiagnostic Technologist 26.94

12040 - Emergency Medical Technician 15.07

12071 - Licensed Practical Nurse I 15.81

12072 - Licensed Practical Nurse II 17.68

12073 - Licensed Practical Nurse III 19.72

12100 - Medical Assistant 14.94

12130 - Medical Laboratory Technician 18.21

12160 - Medical Record Clerk 15.04

12190 - Medical Record Technician 16.83

12195 - Medical Transcriptionist 17.07

12210 - Nuclear Medicine Technologist 36.53

12221 - Nursing Assistant I 10.64

12222 - Nursing Assistant II 11.96

12223 - Nursing Assistant III 13.05

12224 - Nursing Assistant IV 14.66

12235 - Optical Dispenser 15.07

12236 - Optical Technician 14.66

12250 - Pharmacy Technician 16.05

12280 - Phlebotomist 15.19

12305 - Radiologic Technologist 24.36

12311 - Registered Nurse I 21.64

12312 - Registered Nurse II 26.47

12313 - Registered Nurse II, Specialist 26.47

12314 - Registered Nurse III 32.02

12315 - Registered Nurse III, Anesthetist 32.02

12316 - Registered Nurse IV 38.38

12317 - Scheduler (Drug and Alcohol Testing) 21.91

12320 - Substance Abuse Treatment Counselor 22.07

13000 - Information And Arts Occupations

13011 - Exhibits Specialist I 18.62

13012 - Exhibits Specialist II 23.08

13013 - Exhibits Specialist III 28.23

13041 - Illustrator I 18.71

13042 - Illustrator II 23.17

13043 - Illustrator III 28.36

13047 - Librarian 23.31

13050 - Library Aide/Clerk 12.47

13054 - Library Information Technology Systems 21.04

Administrator

13058 - Library Technician 14.92

13061 - Media Specialist I 15.37

13062 - Media Specialist II 16.97

13063 - Media Specialist III 18.95

13071 - Photographer I 16.73

13072 - Photographer II 18.71

13073 - Photographer III 23.17

13074 - Photographer IV 28.36

13075 - Photographer V 34.30

13090 - Technical Order Library Clerk 15.74

13110 - Video Teleconference Technician 14.97

14000 - Information Technology Occupations

14041 - Computer Operator I 14.15

14042 - Computer Operator II 15.83

14043 - Computer Operator III 17.64

14044 - Computer Operator IV 19.60

14045 - Computer Operator V 21.71

14071 - Computer Programmer I (see 1) 21.01

14072 - Computer Programmer II (see 1) 26.04

14073 - Computer Programmer III (see 1)

14074 - Computer Programmer IV (see 1)

14101 - Computer Systems Analyst I (see 1)

14102 - Computer Systems Analyst II (see 1)

14103 - Computer Systems Analyst III (see 1)

14150 - Peripheral Equipment Operator 14.15

14160 - Personal Computer Support Technician 19.60

14170 - System Support Specialist 32.29

15000 - Instructional Occupations

15010 - Aircrew Training Devices Instructor (Non-Rated) 29.19

15020 - Aircrew Training Devices Instructor (Rated) 35.31

15030 - Air Crew Training Devices Instructor (Pilot) 41.49

15050 - Computer Based Training Specialist / Instructor 29.19

15060 - Educational Technologist 25.07

15070 - Flight Instructor (Pilot) 41.49

15080 - Graphic Artist 18.83

15085 - Maintenance Test Pilot, Fixed, Jet/Prop 39.96

15086 - Maintenance Test Pilot, Rotary Wing 39.96

15088 - Non-Maintenance Test/Co-Pilot 39.96

15090 - Technical Instructor 19.91

15095 - Technical Instructor/Course Developer 24.34

15110 - Test Proctor 16.06

15120 - Tutor 16.06

16000 - Laundry, Dry-Cleaning, Pressing And Related Occupations

16010 - Assembler 9.02

16030 - Counter Attendant 9.02

16040 - Dry Cleaner 10.69

16070 - Finisher, Flatwork, Machine 9.02

16090 - Presser, Hand 9.02

16110 - Presser, Machine, Drycleaning 9.02

16130 - Presser, Machine, Shirts 9.02

16160 - Presser, Machine, Wearing Apparel, Laundry 9.02

16190 - Sewing Machine Operator 11.41

16220 - Tailor 12.13

16250 - Washer, Machine 9.45

19000 - Machine Tool Operation And Repair Occupations

19010 - Machine-Tool Operator (Tool Room) 22.54

19040 - Tool And Die Maker 27.84

21000 - Materials Handling And Packing Occupations

21020 - Forklift Operator 16.68

21030 - Material Coordinator 20.33

21040 - Material Expediter 20.33

21050 - Material Handling Laborer 14.36

21071 - Order Filler 13.39

21080 - Production Line Worker (Food Processing) 16.68

21110 - Shipping Packer 13.50

21130 - Shipping/Receiving Clerk 13.50

21140 - Store Worker I 11.91

21150 - Stock Clerk 16.71

21210 - Tools And Parts Attendant 16.68

21410 - Warehouse Specialist 16.68

23000 - Mechanics And Maintenance And Repair Occupations

23010 - Aerospace Structural Welder 23.77

23019 - Aircraft Logs and Records Technician 19.21

23021 - Aircraft Mechanic I 22.52

23022 - Aircraft Mechanic II 23.77

23023 - Aircraft Mechanic III 25.14

23040 - Aircraft Mechanic Helper 17.57

23050 - Aircraft, Painter 21.76

23060 - Aircraft Servicer 19.21

23070 - Aircraft Survival Flight Equipment Technician 21.76

23080 - Aircraft Worker 20.12

23091 - Aircrew Life Support Equipment (ALSE) Mechanic 20.12

I

23092 - Aircrew Life Support Equipment (ALSE) Mechanic 22.52

II

23110 - Appliance Mechanic 21.25

23120 - Bicycle Repairer 15.72

23125 - Cable Splicer 35.71

23130 - Carpenter, Maintenance 19.79

23140 - Carpet Layer 23.17

23160 - Electrician, Maintenance 27.97

23181 - Electronics Technician Maintenance I 21.68

23182 - Electronics Technician Maintenance II 23.77

23183 - Electronics Technician Maintenance III 25.38

23260 - Fabric Worker 20.18

23290 - Fire Alarm System Mechanic 21.43

23310 - Fire Extinguisher Repairer 18.73

23311 - Fuel Distribution System Mechanic 24.80

23312 - Fuel Distribution System Operator 18.78

23370 - General Maintenance Worker 16.68

23380 - Ground Support Equipment Mechanic 22.52

23381 - Ground Support Equipment Servicer 19.21

23382 - Ground Support Equipment Worker 20.12

23391 - Gunsmith I 18.73

23392 - Gunsmith II 21.63

23393 - Gunsmith III 24.80

23410 - Heating, Ventilation And Air-Conditioning 21.86

Mechanic

23411 - Heating, Ventilation And Air Contidioning 23.07

Mechanic (Research Facility)

23430 - Heavy Equipment Mechanic 24.28

23440 - Heavy Equipment Operator 22.23

23460 - Instrument Mechanic 24.80

23465 - Laboratory/Shelter Mechanic 23.23

23470 - Laborer 13.62

23510 - Locksmith 20.71

23530 - Machinery Maintenance Mechanic 23.45

23550 - Machinist, Maintenance 19.75

23580 - Maintenance Trades Helper 16.70

23591 - Metrology Technician I 24.80

23592 - Metrology Technician II 26.25

23593 - Metrology Technician III 27.77

23640 - Millwright 24.80

23710 - Office Appliance Repairer 18.45

23760 - Painter, Maintenance 19.96

23790 - Pipefitter, Maintenance 26.94

23810 - Plumber, Maintenance 22.23

23820 - Pneudraulic Systems Mechanic 24.80

23850 - Rigger 24.80

23870 - Scale Mechanic 21.63

23890 -…