11B5090769RIA_distro A.pdf
PDF 146 KB Posted
- Attached to
- Bench Grinder and Mill/Drill Press
- Solicitation number
- W519TC26QA142
About this file
This is a Vendor Item Control Drawing for a mill/drill press, issued by the U.S. Army Combat Capabilities Development Command Chemical Biological Center at Rock Island Arsenal. The drawing specifies a JET JMD-15 Mill/Drill with R-8 Taper (Part Number 11B5090769) as the suggested source of supply, manufactured by JPW Industries Inc. located in La Vergne, Tennessee (CAGE Code 3ZFY8, Vendor Part No. 350017).
The mill/drill press must be industrial quality, rated for 120 volts, 60 hertz, single phase operation with a maximum amperage of 20 amps and maximum weight of 500 pounds. Key operational specifications include a minimum 14-inch swing, 12-inch X-axis travel, 5-inch Y-axis travel, 3.5-inch spindle travel, and a 1 HP minimum spindle motor with speed range of 110 to 2,580 RPM across a minimum of 12 speeds. The equipment must have a minimum 1-inch drilling capacity, 2.5-inch face mill capacity, 0.5-inch end mill capacity, and a 7-inch by 20-inch minimum table with 9/16-inch T-slot size and minimum of 4 T-slots. Maximum envelope dimensions are 40 inches wide by 37.25 inches long by 41.50 inches high. The unit includes an adjustable work light and must be supplied with eight component items: an angle vise, face mill, face mill inserts (quantity 4), face mill arbor, drill chuck, drill chuck key, drill chuck arbor, and three handles. The drawing carries revision A (updated January 6, 2023) and references applicable ASME standards Y14.100-2004 and Y14.5-2009.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| W519TC26QA142 0002.pdf | ||
| W519TC26QA142 0001.pdf | ||
| 11B5091027_A.pdf | ||
| W519TC26QA142.pdf | ||
| 11B5090807_A.pdf | ||
| 11B5090288RIA_distro A.pdf | ||
| 11B5090774_A.pdf | ||
| 11B5090770_A.pdf | ||
| 11B5090771_A.PDF | ||
| 11B5090773_A.pdf | ||
| 11B5091026_A.PDF | ||
| 11B5090772_A.pdf |
Show all 12
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
41.50 MAXIMUM OPERATING
HEIGHT
40.00 MAXIMUM OPERATING WIDTH
A A
30.00 MAXIMUM
37.25 MAXIMUM LENGTH
2.00±.13
MOUNTING SURFACES
BOTH SIDES
2.00±.13
MOUNTING SURFACES
BOTH SIDES
SUGGESTED SOURCE OF SUPPLY
PART
NUMBER
VENDOR DATA
NAME & ADDRESS CAGE
CODE
VENDOR
PART NO. DESCRIPTION
11B5090769
JPW INDUSTRIES INC.
427 NEW SANFORD RD
LA VERGNE, TN 37086
888-793-1358
3ZFY8 350017 JET JMD-15 MILL/DRILL WITH R-8
TAPER 115V 1 PH
SALIENT FEATURES
MUST BE INDUSTRIAL QUALITY
ELECTRICAL RATING 120 VOLT, 60 HERTZ, 1 PHASE
AMPERAGE 20 AMP MAX
WEIGHT 500 POUND MAX
SWING 14" MIN
X AXIS TRAVEL 12" MIN
Y AXIS TRAVEL 5" MIN
MAX SPINDLE TO TABLE DISTANCE 14" MIN
SPINDLE TRAVEL 3-1/2” MIN
SPINDLE MOTOR 1 HP MIN
SPINDLE SPEED RANGE 110 TO 2,580 RPM MIN
NUMBER OF SPINDLE SPEEDS 12 MIN
DRILLING CAPACITY 1” MIN
FACE MILL CAPACITY 2-1/2” MIN
END MILL CAPACITY 1/2” MIN
SPINDLE TAPER R-8
TABLE SIZE 7” X 20” MIN
T-SLOT SIZE 9/16”
NUMBER OF T-SLOTS 4 MIN
MAX ENVELOPE 40" X 37.25" X 41.50"
WORK LIGHT INCLUDED, ADJUSTABLE TO DIRECT LIGHT
AT WORK AREA.
COMPONENTS THE ITEMS IN THE COMPONENT LIST SHALL
BE PROVIDED WITH THE MILL/DRILL PRESS.
REVISIONS
LTR NOR NUMBER DATE APPROVED
- NOR 738-0001-001 2014-04-25 PMS
A 738-0297-001 2023-01-06 PMS
COMPONENT LIST
ITEM
NO. PART NUMBER NOMENCLATURE UNIT OF
MEASURE QTY.
1 11B5090770 MILL/DRILL ANGLE VISE EA 1
2 11B5090771 MILL/DRILL FACE MILL EA 1
3 11B5091026 MILL/DRILL FACE MILL INSERTS EA 4
4 11B5090772 MILL/DRILL FACE MILL ARBOR EA 1
5 11B5090773 MILL/DRILL DRILL CHUCK EA 1
6 11B5090774 MILL/DRILL DRILL CHUCK KEY EA 1
7 11B5091027 MILL/DRILL DRILL CHUCK ARBOR EA 1
8 11B5090807 MILL/DRILL HANDLE EA 3
DWG NO.
CONTRACT NO.
5B5M3
DAI
D
SIZE
3 PLACE DECIMALS ±
2 PLACE DECIMALS ± .06
SHEETSCALE
DRAWING APPROVAL
DESIGN APPROVAL
SUBMITTED
CHECKERDRAWN BY
ORIGINAL DATE
MATERIAL
TOLERANCES ON:
DIMENSIONS ARE IN INCHES
UNLESS OTHERWISE SPECIFIED
EQUIPMENT CODE NO.
8 7 6 5 4 3 2 1
8 7 6 5 4 3 2 1
D
C
B
A
D
C
B
A
FRACTIONS ±
MILL/DRILL PRESS
11B5090769 1:4
R. McCLAIN R. McCLAIN
A. PHAM
C. HANEY
P. SCHLUE738
(YR-MO-DA)
ANGLES ±
DISTRIBUTION STATEMENT A. APPROVED FOR PUBLIC RELEASE; DISTRIBUTION IS UNLIMITED.
VENDOR ITEM CONTROL DRAWING
Rev: A
2011-12-12NEXT ASSY
11B5040010
NOTES
APPLICABLE STANDARDS/SPECIFICATIONS:1.
A. ASME Y14.100-2004
B. ASME Y14.5-2009
IDENTIFICATION OF THE SUGGESTED SOURCE(S) OF SUPPLY 2.
HEREON IS NOT TO BE CONSTRUED AS A GUARANTEE OF
PRESENT OR CONTINUED AVAILABILITY AS A SOURCE OF SUPPLY
FOR THE ITEM DESCRIBED ON THE DRAWING.
VENDOR PART NUMBER(S) ARE FOR REFERENCE ONLY. DRAWING 3.
SPECIFICATIONS AND DIMENSIONAL REQUIREMENTS SUPERCEDE
VENDOR PART NUMBER(S) AND/OR CATALOG CALLOUTS.
U.S. ARMY COMBAT CAPABILITIES DEVELOPMENT COMMAND
CHEMICAL BIOLOGICAL CENTER
ROCK ISLAND ARSENAL, ROCK ISLAND, IL 61299
4X .50
15.94
1.17 10.16 1.17
20.00
12.50
SECTION A-A
DWG NO.
U.S. ARMY COMBAT CAPABILITIES DEVELOPMENT COMMAND
ROCK ISLAND ARSENAL, ROCK ISLAND, IL 61299
CHEMICAL BIOLOGICAL CENTER
CONTRACT NO.
5B5M3
DAI
D
SIZE
3 PLACE DECIMALS ±
2 PLACE DECIMALS ± .06
SHEETSCALE
DRAWING APPROVAL
DESIGN APPROVAL
SUBMITTED
CHECKERDRAWN BY
ORIGINAL DATE
MATERIAL
TOLERANCES ON:
DIMENSIONS ARE IN INCHES
UNLESS OTHERWISE SPECIFIED
EQUIPMENT CODE NO.
NEXT ASSY
8 7 6 5 4 3 2 1
8 7 6 5 4 3 2 1
D
C
B
A
D
C
B
A
FRACTIONS
11B5090769
2011-12-12
1:4
R. McCLAIN
A. PHAM
C. HANEY
P. SCHLUE
11B5040010
(YR-MO-DA)
VENDOR ITEM CONTROL DRAWING
ANGLES ±
MILL/DRILL PRESS
R. McCLAIN
DISTRIBUTION STATEMENT A. APPROVED FOR PUBLIC RELEASE; DISTRIBUTION IS UNLIMITED.
REV: A
| Sheet1 |
| Drawing View1 |
| Drawing View2 |
| Sheet2 |
| Section View A-A |
File details come from the government source that posted it. Updated .