11809 Power Converters BPA Product Description.docx

DOCX document 24 KB Posted

Attached to
Power Converters BPA
Solicitation number
FA822724Q5009
Issued by

About this file

This document is a Product Description that outlines the requirements for a Blanket Purchase Agreement (BPA) for the purchase of approximately 200, 400 Hz Power Converters for the U.S. Air Force. The BPA will be for a five-year period.

The Power Converters must meet specific technical specifications, including modular solid-state frequency converters in both horizontal and vertical configurations ranging from 30 kVA to 90 kVA, with 400 Hz, 115 VAC output and 480V, 3-phase, 60 Hz input. The converters must have interchangeable rectifier/inverter modules, adjustable output voltage, UL listing, cable hooks, and equal power distribution across the modules. The maximum weight for the 90 kVA horizontal units is 400 kg, and the maximum volume for units up to 90 kVA is 30 ft3.

The solicitation is being issued by the Department of the Air Force Materiel Command Air Force Sustainment Center. Responses to this Sources Sought Notice are due by November 22, 2024, and should be emailed to the contract specialist, Lt. Quinn Walsh.

View the file

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file

Text version

U.S Air Force Product Description and Specifications for Power Converters BPA

POC: Pieder Beeli 9/4/2024

Description and Specifications Power Converters BPA

309 maintenance support group (MXSG) Engineering is required to establish a five-year blanket purchase agreement (BPA) for the purchase of approximately 200, 400 Hz Converters. The converters shall meet the specifications listed below at a minimum. To reduce the cost of equipment replacement converters with interchangeable rectifiers/ inverters are preferred.

Modular Solid State Frequency Converters Horizontal:

· Modular power augmentation options from 30, 60 and 90 kVA which, when the higher power capacity options are chosen, will divide power equally across the modules

· Horizontal - 90kVA, 400Hz 115VAC output, 480V input. Est QTY- 60

· Horizontal - 60kVA, 400Hz 115VAC output, 480V input. Est QTY- 50

· Horizontal - 30kVA, 400Hz 115VAC output, 480V input. Est QTY- 15

· Adjustable output voltage (between 110 and 120 Vrms)

· A weight less than 400 kg for 90 kVA horizontal units

· A volume of less than 30 ft3 for power capacity of 90 kVA or less

· 400Hz 115VAC nominal output

· 480V 3 phase 60Hz input

· Bidirectional 3-phase interchangeable rectifier/inverter module

· Cable hooks

· UL listed

· Equal power distribution across each 30kVA section

· 12 V of boost at 30 kVA

· Can be configured with a cart or stand

Modular Solid State Frequency Converters Vertical QTY:

· Modular power augmentation options from 30, 60 amd 90 kVA and which, when the higher power capacity options are chosen, will divide power equally across the modules

· Vertical - 30kVA, 400Hz 115VAC output, 480V input. Est QTY- 30

· Vertical - 60kVA, 400Hz 115VAC output, 480V input. Est QTY- 25

· Vertical - 90kVA, 400Hz 115VAC output, 480V input. Est QTY- 20

· Adjustable output voltage (between 110 and 120 Vrms)

· A weight less than 300 kg for 90 kVA

· A volume of less than 30 ft3 with a power capacity of 90 kVA or less

· 400Hz 115VAC nominal output

· 480V 3 phase 60Hz input

· Bidirectional 3-phase interchangeable rectifier/inverter module

· Cable hooks

· Equal power distribution across each 30kVA section

· UL Listed

· 12 V of boost at 30 kVA

· Can be configured with a stand

Requested Services.

· Onsite commissioning of power converters to include airfare, hotel, car rental, food and other travel expenses.

· On the job hands on familiarization to provide government employees with train the trainer experience including airfare, hotel, car rental, food and other travel expenses.

CONTRACTUAL REQUIREMENTS

Warranty:

The contractor shall provide a standard commercial warranty. If specific warranty information is needed, give details here.

Delivery:

The contractor shall deliver the equipment to the following address located at Hill Air Force Base:

Provide POC and physical address for shipping and receiving.

Pieder Beeli
5832 H Ave bldg. 843 Bay J Hill AFB UT 84056

File details come from the government source that posted it. Updated .