1111-9235-41117-Extruder Salient Characteristics.pdf
PDF 76 KB Posted
- Attached to
- EXTRUDER, DIES # 1 & 2, SCISSOR LIFT TABLE
- Solicitation number
- SPMYM2-21-Q-1480
View the file
Other files
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Salient Characteristics for JML number:
Dimensions including mobile lift table will not exceed: Weight, pounds 800, Width, inches 30, Depth, inches 40, Height, inches 57-75.
Specifications:
The mobile lift table will meet the following specifications: Four hard rubber or durable plastic wheels at least 5 inches in diameter. Two wheels will be fixed and two wheels will swivel. Will have brakes on at least two wheels. Table top will be of at least 12 gauge steel or thicker. Frame material will be steel. Will have a weight capacity of at least 1,600 pounds. Raise and lower movement will be at least 18 inches.
The portable rubber extruder will consist of following specifications: All material contact surfaces will be stainless steel. Feed opening will be at least 4 inches by 3 inches. Extrusion screw will be at least 2 inches in diameter and have hard faced flights. It will have counter rotating packing screws. The feed barrel will be smooth. Motor will be of at least 5 HP with at least 3,750 pounds of torque per inch and use 230V, 3 phase, 60 HZ power. The extruder will be designed for quick disassembly and reassembly for cleaning. Speed controller will have LED keypad and speed reference potentiometer.
Two extruder dies will be provided one each to meet the attached drawings, Attachment 1 and Attachment 2.
All standard equipment required for proper operation of the extruder machine (such as special tools) must be furnished.
All words on instruments, control panels, and plates must be in the English language.
Characters must be printed, engraved, etched, embossed, or stamped in boldface on a contrasting background.
All label plates will be corrosion resistant.
A lubrication plate will be permanently and securely attached to the machine. The plate will contain the following information:
Points of lubricant application, Servicing interval, Type of lubricant, Viscosity, Military or Federal Specification for each lubricant (If applicable) Size and type of each lubricant filter.
A nameplate will be permanently and securely attached to each machine.
The nameplate will contain the information listed below. If the machine is a special model, the model designation shall include the model number of the basic standard machine and a suffix identified in the manufacturer's permanent records.
Nomenclature, Manufacturer's name, Manufacturer's model, designation, Manufacturer's serial number, Power input (volts, total amps, phase, frequency), Contract Number or Order Number, Date of manufacture.
Deliverables:
Operating and Maintenance (O&M) Manuals. Three (3) hard copies and one (1) electronic copy(s) of O&M Manuals must be provided with the machine. O&M Manuals will contain technical information, specifications, instructions for the operation, maintenance of the machine and recommended spare parts list. All copies of technical data must be legible and written in the English language.
Technical Data shall contain at a minimum:
A. Data must enable an average journeyman mechanic to operate, program, maintain, and repair the equipment.
B. Complete instructions and information for all equipment, components, assemblies, subassemblies, attachments, and accessories.
C. Operating instructions including programming requirements, pre-operational checks, start up, shut down and emergency shutdown procedures.
D. Maintenance and service instructions, including all preventive maintenance schedules, and lubrication charts.
E. Trouble-shooting guides.
F. Parts list containing: illustrations, part numbers, part nomenclature, original manufacturer, cross reference numbers, and recommended spare parts, including quantities.
G. Energy control procedure, in accordance with 29 CFR 1910.147, to bring equipment to a zero energy state for maintenance.
H. All mechanical and electrical schematics with a table of contents showing discrete components block diagrams, wiring diagrams with inputs and outputs identified system electrical interface documents, and drawings for the specific model of all machine equipment/drives/controls supplied.
Shipping. Contractor will be responsible for shipping to delivery address.
Examination. The extruding machine will be examined to determine compliance with these requirements.
Delivery address: The "Ship/Deliver to" address on the Bill of Lading (B/L) should include the JML number:
ATTACHMENT 1: EXTRUDR DIE #1
ATTACHMENT 2: EXTRUDR DIE #2
| Salient Characteristics for JML number: |
| Dimensions including mobile lift table will not exceed: Weight, pounds 800, Width, inches 30, Depth, inches 40, Height, inches 57-75. |
| Specifications: |
| The mobile lift table will meet the following specifications: Four hard rubber or durable plastic wheels at least 5 inches in diameter. Two wheels will be fixed and two wheels will swivel. Will have brakes on at least two wheels. Table top will be ... |
| The portable rubber extruder will consist of following specifications: All material contact surfaces will be stainless steel. Feed opening will be at least 4 inches by 3 inches. Extrusion screw will be at least 2 inches in diameter and have hard fa... |
| Two extruder dies will be provided one each to meet the attached drawings, Attachment 1 and Attachment 2. |
| All standard equipment required for proper operation of the extruder machine (such as special tools) must be furnished. |
| All words on instruments, control panels, and plates must be in the English language. |
| Characters must be printed, engraved, etched, embossed, or stamped in boldface on a contrasting background. |
| All label plates will be corrosion resistant. |
| A lubrication plate will be permanently and securely attached to the machine. The plate will contain the following information: |
| Points of lubricant application, Servicing interval, Type of lubricant, Viscosity, Military or Federal Specification for each lubricant (If applicable) Size and type of each lubricant filter. |
| A nameplate will be permanently and securely attached to each machine. |
| The nameplate will contain the information listed below. If the machine is a special model, the model designation shall include the model number of the basic standard machine and a suffix identified in the manufacturer's permanent records. |
| Nomenclature, Manufacturer's name, Manufacturer's model, designation, Manufacturer's serial number, Power input (volts, total amps, phase, frequency), Contract Number or Order Number, Date of manufacture. |
| Deliverables: |
| Operating and Maintenance (O&M) Manuals. Three (3) hard copies and one (1) electronic copy(s) of O&M Manuals must be provided with the machine. O&M Manuals will contain technical information, specifications, instructions for the operation, maintenan... |
| Technical Data shall contain at a minimum: |
| A. Data must enable an average journeyman mechanic to operate, program, maintain, and repair the equipment. |
| B. Complete instructions and information for all equipment, components, assemblies, subassemblies, attachments, and accessories. |
| C. Operating instructions including programming requirements, pre-operational checks, start up, shut down and emergency shutdown procedures. |
| D. Maintenance and service instructions, including all preventive maintenance schedules, and lubrication charts. |
| E. Trouble-shooting guides. |
| F. Parts list containing: illustrations, part numbers, part nomenclature, original manufacturer, cross reference numbers, and recommended spare parts, including quantities. |
| G. Energy control procedure, in accordance with 29 CFR 1910.147, to bring equipment to a zero energy state for maintenance. |
| H. All mechanical and electrical schematics with a table of contents showing discrete components block diagrams, wiring diagrams with inputs and outputs identified system electrical interface documents, and drawings for the specific model of all machi... |
| Shipping. Contractor will be responsible for shipping to delivery address. |
| Examination. The extruding machine will be examined to determine compliance with these requirements. |
| Delivery address: The "Ship/Deliver to" address on the Bill of Lading (B/L) should include the JML number: |
| ATTACHMENT 1: EXTRUDR DIE #1 |
| ATTACHMENT 2: EXTRUDR DIE #2 |
File details come from the government source that posted it. Updated .