11_Special_Packaging_Instructions.pdf
PDF 615 KB Posted
- Attached to
- Air Supply Ordnance Initiators Federal contract opportunity
- Solicitation number
- FA821323Q1341
About this file
This document provides packaging and shipping instructions for munitions and ordnance initiators. It specifies that items must be wrapped and placed in barrier bags with air removed and sealed. Wooden materials like pallets, boxes and containers must be constructed from debarked wood and heat treated to specific temperatures to prevent the spread of invasive species. Markings are required to certify treatment by an accredited agency. Packaging must also comply with standards for phytosanitary measures regarding wood packaging materials in international trade. The related federal contract opportunity is for air supply ordnance initiators from the Air Force Materiel Command Lifecycle Management Center at Hill Air Force Base. Packaging and shipping of any items procured must follow the special instructions detailed in the document.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| Solicitation Amendment 2.pdf | ||
| Solicitation Amendment 1.pdf | ||
| 1_Airmunition_Specification.pdf | ||
| 10_SOW_for_Packaging_and_Preservation.pdf | ||
| 9a_Item_Description_1336016004573ES.pdf | ||
| 7_CADPAD_Item_Marking.pdf | ||
| 8_Contract_Data_Requirements_List.pdf | ||
| 4_ES7034_Rework_and_Repair_of_Nonconforming_Material.pdf | ||
| 3_JFQR.pdf | ||
| 9b_Item_Description_1336012305975ES.pdf | ||
| 6a_Engineering_Data_Lists_1336016004573.pdf | ||
| Solicitation.pdf | ||
| 2_Ammunition_Data_Card.pdf | ||
| 5_REPSHIP_of_HAZMAT.pdf | ||
| 6b_Engineering_Data_Lists_1336012305975.pdf |
Show all 15
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
NOTE: THE ABOVE POP MARKINGS
ARE FOR DOD USE ONLY.
DISTRIBUTION STATEMENT D: DISTRIBUTION AUTHORIZED TO DEPARTMENT OF DEFENSE AND U.S. DOD CONTRACTORS ONLY, ADMINISTRATIVE OR OPERATIONAL USE, 11 JANUARY 2018. OTHER REQUESTS FOR THIS DOCUMENT SHALL BE REFERRED TO 406
SCMS/GULAA, (PACKAGING DIVISION), HILL AFB, UTAH 84056.
DESTRUCTION NOTICE: FOLLOW THE PROCEDURES IN DOD 5220.22-M, NATIONAL INDUSTRIAL SECURITY PROGRAM OPERATING MANUAL (NISPOM), SECTION 5-705, OR DOD 5200.1-R, INFORMATION SECURITY PROGRAM, CHAPTER VI. FOR UNCLASSIFIED, LIMITED DOCUMENTS, DESTROY BY ANY METHOD THAT WILL PREVENT DISCLOSURE OF CONTENTS OR RECONSTRUCTION OF THE DOCUMENT.
MUNITION NOTICES
NOTES
1. MAY PLACE UP TO 20 ITEMS IN SHIPPING CONTAINER.
2. WRAP ITEM WITH REF.-3 AND PLACE INTO BARRIER BAG REF.-2. REMOVE AIR AND SEAL.
INTERNATIONAL STANDARDS FOR PHYTOSANITARY MEASURES
REVISION OF ISPM NO. 15
REVISION OF WOOD PACKAGING MATERIAL FOR INTERNATIONAL TRADE
THE FOLLOWING STATEMENT IS IN COMPLIANCE WITH THE UNITED NATIONS-IMPLEMENTED RESTRICTIONS ON WOOD
PACKAGING MATERIAL (WPM). THIS REQUIREMENT IS SPECIFICALLY CONCERNED WITH INVASIVE SPECIES SUCH AS THE
PINEWOOD NEMATODE. WPM IS DEFINED AS WOOD PALLETS, SKIDS, LOAD BOARDS, PALLET COLLARS, WOODEN BOXES, REELS, DUNNAGE, CRATES, FRAMES, AND CLEATS. THE STATEMENT BELOW CITES THE REQUIREMENTS IN DETAIL AND
COVERS LUMBER FOR BUILDING CONTAINERS AND PALLETS USED FOR DELIVERIES, RESULTING IN SHIPMENTS WORLDWIDE
(DIRECT, OR THROUGH AIR LOGISTICS CENTERS (ALC), CONTAINER CONSOLIDATION POINTS (CCP), OR OTHER BASES).
WOODEN LUMBER, WOODEN PALLET AND PACKAGING/CONTAINER STATEMENT:
ALL WOODEN LUMBER, WOODEN PALLETS, AND WOODEN CONTAINERS PRODUCED ENTIRELY OR IN PART OF WOOD
PACKAGING MATERIAL (WPM) SHALL BE CONSTRUCTED FROM DEBARKED WOOD IN ADDITION TO THE APPLICATION OF
HEAT-TREATED (HT) MATERIAL (HT TO 56 DEGREES CENTIGRADE OR 133 DEGREES FAHRENHEIT FOR 30 MINUTES).
CERTIFICATION/MARKING IS REQUIRED BY AN ACCREDITED AGENCY RECOGNIZED BY THE AMERICAN LUMBER STANDARDS
COMMITTEE (ALSC). FOR REFERENCE DOCUMENTATION, SEE LATEST REVISION OF "INTERNATIONAL STANDARDS FOR
PHYTOSANITARY MEASURES (ISPM NO. 15), "REGULATION OF WOOD PACKAGING MATERIAL IN INTERNATIONAL TRADE."
REFER TO MIL-STD-129 FOR MARKING
REQUIREMENTS OF PALLETIZED UNIT
LOADS OF AMMUNITION.
File details come from the government source that posted it. Updated .