10x10 guard module specs.docx
DOCX document 15 KB Posted
- Attached to
- USCG BASE KODIAK 10FTX10FT CONNEX GUARD BUILDING
- Solicitation number
- 70Z04524-Q-KODI0079
About this file
This document is a solicitation for the procurement of two (2) 10'x10' guard module CONNEX units with specific construction details. The solicitation is issued by the U.S. Coast Guard, a civilian agency under the Department of Homeland Security, as Request for Quotation (RFQ) number 70Z04524-Q-KODI0079. The units are required for use at USCG Base Kodiak in Alaska and must withstand harsh Arctic marine conditions. The government estimate for this acquisition is less than $80,000, and it is set aside 100% for small businesses. Quotes are due by 2:00 PM Alaska Time on August 27, 2024 and should be submitted by email to the specified Contract Specialist. The solicitation includes detailed specifications for the required guard module construction, including skid, floor, walls, ceiling/roof, door, and electrical systems.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| RFQ SF-18 CONNEX GUARD SHACK.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
QTY TWO (2):
10’x10’ Guard Module CONNEX with 3 slider windows (48”x43” (2X) and 42”x48” slider window (3x)the following construction details.
Construction Details: • *Steel Skid: Skid Mounted Sleeper Module w/fork pockets: W10x12 outside skid with chain catches at each quarter
• Floor Construction: exterior to interior -3/8” CDX sheathing under floor o 2”x 8” on 16” centers fiberglass insulation R-30 3/4” OSB, mudded and sanded 80 mils sprayed polyurea (polyshield HT); sprayed 1.5” up wall to form tub in each room • Exterior Wall Construction: exterior to interior 29 Gauge 5 rib pro panel metal siding (white w/black top and bottom trim) 1/2” CDX sheathing 2”x 4” on 16” center Fiberglass insulation R-13 6 mil vapor barrier 1/2” Gypsum with H channel dividers, primed and painted white (Sherwin Williams Super Paint) finished with 4” black rubber base molding (glued and stapled)
• Ceiling / Roof Construction: exterior to interior .045” EPDM rubber roofing (Firestone or equal) finished with aluminum termination bar ½” CDX plywood decking o Tapered 2”x 10” on 16” center (taper such that water runs away from man doors) R-30 Fiberglass insulation o 6 mil vapor barrier 1/2” Gypsum with H channels, primed and painted white (Sherwin Williams Super Paint) finished with ¾” PVC cove trim • Exterior Door:
36”x80” Insulated steel door with wood frame Custom 26 gauge galvalume threshold Drip edge over door Relight Schalge (or equal) passage lock
• NEC Approved Electrical System Electrical Service:
▪ 100A Single phase 120/240v exterior rated Load Center with main breaker Lighting:
▪ 4’ Lithonia LBL4 LED fixtures
▪ Exterior RAB light controlled by photo sensor, located outside entry door Heat: 4000-Watt, wall surface mounted electric heaters Outlets: Commercial grade 120V/20A duplex receptacles (qty 4) XHHW wiring in surface mounted conduit
Shipping to USCG Base Kodiak, Kodiak, Alaska 99619
File details come from the government source that posted it. Updated .