S01 - Clarifications to RFQ 1076215.docx

Below are clarifications to RFQ 1076215. No further questions will be addressed.

1. How many sheds have you requested? Two

1. What is the delivery address?

CORDELL SERVICE CENTER

1505 N Glenn L English Ss Cordell, OK 73632-1405 and

HOBART SERVICE CENTER

800 W 11TH ST

Hobart, OK 73651-5402

1. Do you need the sheds to be installed? Yes

1. Are the sheds need to have any electrical outlets or ceiling lights? No

1. What is the main purpose of using those sheds? Storing UTVs and Trailers

1. Do you need the traditional roof ( pick in middle ) or sloped in one direction? Traditional

1. What is the height of the shed? No specific requirement on total height as long as it can accommodate the 10X10 roll-up door – this allows a UTV on a trailer to be backed into the shed.

1. Is the roll-up door will be on the 12 feet side or the 16 feet? 12 foot side

1. Is the walk door will be on the 12 feet side or the 16 feet? 16 foot side

1. Do you need windows? No

1. Do you need the siding and roof to be insulated? No

1. Do you have specific colors for siding, top roofs, and trims? This shed will be located near our office buildings which are red brick colored – we just need the shed to blend well with red brick. We’ve used white siding in the past, but I am open to different colors.

1. When you said movable, do you need the storage to be on top of tires or just a floor frame and hinges that you can use to move it using a crane or forklift? Floor frame is all that is needed – do not need on tires.

1. What are the dimensions of the ramp including the width and the height? Ramp will allow a trailer to be backed into the 10X10 overhead door space. Ramp should be the width of the overhead door (10’) and ramp should stop at floor height (even with floor).

1. Do you need steps for the walk door? No