10473729_3730-SALIENT CHARACTERISTICS.docx

Miller ProHeat 35 w/ Cooler ProHeat Heavy Duty Induction Jmls to include 1047-3729 and 1047-3730 NRTL completed by OSHA certified (CSA) Maximum Temperature: 1,450 Fahrenheit Heat Source: Induction Doesn’t produce an open flame (runs from power with no Gases as fuel system) Input Power: 460-575 V 3-phase, 60 Hz Provides a single level of output up to 35 KW Power Source Dimensions H: 27.5 in x W: 21.75 in x D: 36.75 in Ability to use up to four control thermocouples Net Weight: 227 lbs. (Miller 35 Induction Heater) Onboard temperature control – manual or temperature based programming interface Heavy duty induction cooler (add on) – runs low conductivity antifreeze coolant MSDS 43810 (shop is approved on the AUL for product) Lifting fixture for movement of item Must have open output detection feature to prevent operation system without a covered output receptacle Must have automatic system shutdown isolation fault protection that shuts down the system if the power source output shorts to ground via a sense leas that provides direct feedback to the power source to sense fault condition Process Application needs:

· Refinery

· Pressure vessels

· Structural