10411534-05902-Sole Source Justification for Service of Drill Head_Redacted.pdf

JUSTIFICATION FOR SOLE SOURCE (SAP <$150k) Ref: FAR 13.106 and NAVSUP 4200.85D Chapter 5 Para. 2.b.(5)

The service or material listed on (Document number) 10411534 is sole source and competition must be restricted to one source, or to only one brand name for reasons indicated below. There are no substitutes available for this material.

Restricted to the following source or brand name. Provide original manufacturer's name.

(If a sole source manufacturer distributes via dealers, ALSO provide dealer information.)

Manufacturer: Omax Corporation Manufacturer POC & Phone Nr. Olu Edwards 410-564-2905 Mfr. Address 21409 72nd Ave S, Kent, WA 98032 Manufacturers Dealer/Rep Phillips Federal Division Dealer/Rep Address/Phone Number Olu Edwards 410-564-2905

_ _Description of the item or service required, the estimated cost, and required delivery date.

SERVICE FOR INSTALLATION AND CALIBRATION OF DRILL HEAD; REQUIRED DELIVERY DATE: 2/24/2021

_ _Specific characteristics of the material or service that limit the availability to a sole source or particular brand name (unique features, function of the item, etc.).

Describe in detail why only this suggested source can furnish the requirements to the exclusion of other sources.

WATERJET SYSTEM FROM THE MANUFACTURER IS CURRENTLY IN USE AT PSNS, S/64

THIS SERVICE IS PROPRIETARY AND THE ONLY OPEN-MARKET OPTION THAT IS COMPATIBLE FOR THE

EXISTING EQUIPMENT.

_ _The requested material or service represents the minimum requirements of the government

CHECK & FILL IN ALL APPLICABLE BLANKS BELOW

_ _The material/service must be compatible in all aspects (form, fit and function) with existing systems presently installed. Justi Describe the equipment you have now and how the new item/service must coordinate, connect, or interface with the existing system.

SERVICE TO INSTALL THE DRILL HEAD AS A PART OF THE WATERJET SYSTEM REQUIRES SPECIFIC FIT, CALLIBRATION, AND INTERFACING WITH THE PROGRAM OF THE EXISTING EQUIPMENT

THIS REQUIRES SPECIALIZED KNOWLEDGE OF EQUIPMENT FOUND SOLELY THROUGH MANUFACTURER'S TECH

GROUP

I CERTIFY THAT STATEMENTS CHECKED, AND INFORMATION PROVIDED ABOVE, ARE COMPLETE AND CORRECT TO THE BEST OF MY KNOWLEDGE AND DO NOT CONTAIN CLASSIFIED INFORMATION. I UNDERSTAND THAT THE PROCESSING OF THIS SOLE-SOURCE JUSTIFICATION PRECLUDES THE USE OF FULL AND OPEN

COMPETITION.

Contracting Officer Signature Date

FISCPS 4200/180 (Rev. 10/1/10)

_ _A patent, copyright, or proprietary data limits competition. The proprietary data is:

_ _These are “direct replacements” parts/components for existing brand name equipment.

_ _Other information to support a sole-source buy: