10 SPI.pdf
PDF 375 KB Posted
- Attached to
- REMANUFACTURED F-15 PROPELLANT INITIATOR
- Solicitation number
- FA821322R3035
About this file
This document includes a technical file related to packaging and shipping munitions and a solicitation for the remanufacture of the F-15 propellant initiator.
The technical file provides packaging and shipping requirements for munitions, including instructions for placing items in containers, wrapping and bagging items, using cushioning, and marking palletized loads. It also specifies that all wood packaging material like pallets and containers must be constructed from debarked wood treated at high heat to prevent the spread of invasive species. The related solicitation seeks proposals for the remanufacture of the F-15 propellant initiator and is issued by the Air Force Materiel Command Lifecycle Management Center located at Hill Air Force Base.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| 01 FA821322R3035 Solicitation.pdf | ||
| 09 CDRLS.pdf | ||
| 06 Item Description 016457393.pdf | ||
| 01 FA821322R3035 Solicitation.pdf | ||
| 04 CADPAD Item MarkingIngs.pdf | ||
| 11 CPMOriginalSPREADSHEET.xlsx | XLSX spreadsheet | |
| 08 GFP Form.pdf | ||
| 07 Item Description 016457398.pdf | ||
| 03 REPSHIP.pdf | ||
| 02 SOWAppendixA22-51198F-15-2.pdf | ||
| 05 SOW Packaging.pdf |
Show all 11
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
NOTE: THE ABOVE POP MARKINGS
ARE FOR DOD USE ONLY.
DISTRIBUTION STATEMENT D: DISTRIBUTION AUTHORIZED TO DOD AND U.S. DOD CONTRACTORS ONLY, ADMINISTRATIVE OR OPERATIONAL USE, 17 JANUARY 2018. OTHER REQUESTS FOR THIS DOCUMENT SHALL BE REFERRED TO 406 SCMS/GULAA, (PACKAGING
DIVISION), HILL AFB, UTAH 84056.
DESTRUCTION NOTICE: FOLLOW THE PROCEDURES IN DOD 5220.22-M, NATIONAL INDUSTRIAL SECURITY PROGRAM OPERATING MANUAL (NISPOM), SECTION 5-705, OR DOD 5200.1-R, INFORMATION SECURITY PROGRAM, CHAPTER VI. FOR UNCLASSIFIED, LIMITED DOCUMENTS, DESTROY BY ANY METHOD THAT WILL PREVENT DISCLOSURE OF CONTENTS OR RECONSTRUCTION OF THE DOCUMENT.
MUNITION NOTICES
NOTES
1. MAY PLACE UP TO 20 ITEMS IN SHIPPING CONTAINER.
2. WRAP ITEM IN REF.-3, PLACE WRAPPED ITEM IN BARRIER BAG, REF.-2, REMOVE AIR AND SEAL.
3. CUSHION BAG WITH REF.-1, PLACE IN SHIPPING CONTAINER, USING ADDITIONAL CUSHIONING TO PREVENT MOVEMENT
AND ENSURE NONE OF THE BAGS CONTACT CONTAINER WALL.
INTERNATIONAL STANDARDS FOR PHYTOSANITARY MEASURES
REVISION OF ISPM NO. 15
REVISION OF WOOD PACKAGING MATERIAL FOR INTERNATIONAL TRADE
THE FOLLOWING STATEMENT IS IN COMPLIANCE WITH THE UNITED NATIONS-IMPLEMENTED RESTRICTIONS ON WOOD
PACKAGING MATERIAL (WPM). THIS REQUIREMENT IS SPECIFICALLY CONCERNED WITH INVASIVE SPECIES SUCH AS THE
PINEWOOD NEMATODE. WPM IS DEFINED AS WOOD PALLETS, SKIDS, LOAD BOARDS, PALLET COLLARS, WOODEN BOXES, REELS, DUNNAGE, CRATES, FRAMES, AND CLEATS. THE STATEMENT BELOW CITES THE REQUIREMENTS IN DETAIL AND
COVERS LUMBER FOR BUILDING CONTAINERS AND PALLETS USED FOR DELIVERIES, RESULTING IN SHIPMENTS WORLDWIDE
(DIRECT, OR THROUGH AIR LOGISTICS CENTERS (ALC), CONTAINER CONSOLIDATION POINTS (CCP), OR OTHER BASES).
WOODEN LUMBER, WOODEN PALLET AND PACKAGING/CONTAINER STATEMENT:
ALL WOODEN LUMBER, WOODEN PALLETS, AND WOODEN CONTAINERS PRODUCED ENTIRELY OR IN PART OF WOOD
PACKAGING MATERIAL (WPM) SHALL BE CONSTRUCTED FROM DEBARKED WOOD IN ADDITION TO THE APPLICATION OF
HEAT-TREATED (HT) MATERIAL (HT TO 56 DEGREES CENTIGRADE OR 133 DEGREES FAHRENHEIT FOR 30 MINUTES).
CERTIFICATION/MARKING IS REQUIRED BY AN ACCREDITED AGENCY RECOGNIZED BY THE AMERICAN LUMBER STANDARDS
COMMITTEE (ALSC). FOR REFERENCE DOCUMENTATION, SEE LATEST REVISION OF "INTERNATIONAL STANDARDS FOR
PHYTOSANITARY MEASURES (ISPM NO. 15), "REGULATION OF WOOD PACKAGING MATERIAL IN INTERNATIONAL TRADE."
REFER TO MIL-STD-129 FOR MARKING
REQUIREMENTS OF PALLETIZED UNIT
LOADS OF AMMUNITION.
File details come from the government source that posted it. Updated .