10_FAT_CDRLs.pdf

PDF 118 KB Posted

Attached to
T-38 Delay Initiators Federal contract opportunity
Solicitation number
FA8213-23-R-3022
Issued by
Department of the Air Force Materiel Command Lifecycle Management Center Hill Air Force Base

About this file

This document contains two Contract Data Requirements Lists (CDRLs) for solicitation number FA8213-23-R-3022 for T-38 delay initiators. The CDRLs require the following deliverables:

CDRL 1 requires a test procedure for the first article inspection report to be submitted no later than 30 days after completion of first article acceptance testing through the Worldwide Ammunition-data Repository Program and WAWF. Distribution is limited to U.S. Government agencies.

CDRL 2 requires a first article qualification test plan and procedures to be submitted 30 days after contract award. The plan requires Air Force Lifecycle Management Center approval and any changes must be pre-approved. The contractor must provide the plan electronically to AFLCMC recipients. Distribution is also limited to U.S. Government agencies.

View the file

Other files for this federal contract opportunity

Other files attached to T-38 Delay Initiators, newest first.
File Type Posted
FA8213-23-R-3022-0001.pdf PDF
4_CADPAD_Item_Marking_Instruction.pdf PDF
1_AIR_SPEC.pdf PDF
3_ADC_SOW.pdf PDF
7_ES7034_Rework_Repair.pdf PDF
2_REPSHIP.pdf PDF
FA8213-23-R-3022.pdf PDF
9_CDRLs.pdf PDF
5_Packaging_SOW.pdf PDF
6_SPI_F011676621.pdf PDF
8_Item_Descriptions.pdf PDF
Show all 11

On GovTribe

Work with this file on GovTribe

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file

Text version

CONTRACT DATA REQUIREMENTS LIST

(1 Data Item)

Form Approved OMB No. 0704-0188

The public reporting burden for this collection of information is estimated to average 110 hours per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Executive Services Directorate (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. Please do not return your form to the above organization. Send completed form to the Government Issuing Contracting Officer for the Contract/PR No. listed in Block E.

A. CONTRACT LINE ITEM NO. B. EXHIBIT C. CATEGORY:

TDP TM OTHER NDTI

D. SYSTEM/ITEM

1377011376040ES*

E. CONTRACT/PR NO.

FD2020-23-50046

F. CONTRACTOR

1. DATA ITEM NO.

B001

2. TITLE OF DATA ITEM

Test Procedure

3. SUBTITLE

First Article Inspection Report, Contractor Test

4. AUTHORITY (Data Acquisition Document No.)

DI-NDTI-80603A

5. CONTRACT REFERENCE

Airmunitions Specification

6. REQUIRING OFFICE

AFLCMC/EBHJ

7. DD 250 REQ

SD

9. DIST STATEMENT

REQUIRED

B

10. FREQUENCY

1TIME

12. DATE OF FIRST SUBMISSION

BLK16

14. DISTRIBUTION

a. ADDRESSEE

b. COPIES

8. APP CODE

N/A

11. AS OF DATE

BLK16

13. DATE OF SUBSEQUENT

SUBMISSION

ASREQ

Draft

Final

Reg Repro

16. REMARKS

BLK 4: Contractor's format required. Follow content per the Data Item Description and incorporate the following applicable requirements:

a. Dimension and tolerances specified on the manufacturing data shall be listed in one column with the actual corresponding reading obtained from inspection of the part, listed in another column.

b. Material utilized in the manufacture of "First Article" item shall be identified and certified as conforming to applicable data requirements.

c. Certification that identification markings, i.e. part number per MIL-STD-130 and Federal Supply manufacturer (FSCM) per H4-1 Cataloging Handbook (if applicable) have been complied with.

e. The test report will be certified by the responsible DCMA/QAR.

(Authorization for any deviations from the requirements specified by the manufacturing data must be obtained from the procuring agency prior to inclusion in the test report).

BLK 7: The electronic receiving report shall be annotated with the Lot Number, National Stock Number, and Nomenclature. Electronic receiving report required via internet Wide Area Work Flow (WAWF) at https://wawf.eb.mil.

BLK 9: DISTRIBUTION STATEMENT B: Distribution authorized to U.S.

Government agencies (CTI) (Date of Contract Award). Other requests for this document must be referred to AFLCMC/EBHJ.

WARNING - This document contains technical data whose export is restricted by the Arms Export Control Act (Section 2751 of Title 22, U.S.C.) or the Export Control Reform Act of 2018 (Chapter 58 Sections 4801-4852 of Title 50 U.S.C). Violations of these export laws are subject to severe criminal penalties. Disseminate in accordance with the provisions of DoD Directive 5230.25 and DoD Instruction 2040.02.

BLK 12: Submit no later than 30 calendar days after completion of First Article Acceptance Testing. Submit through Worldwide Ammunition-data Repository Program (WARP) and WAWF under DoDAAC

FA8213.

*1377011376039ES, 1377014940468ES, 1377014940471ES.

FOB DESTINATION

EBH 23-094-001(22-235-002)

Terry McCurdy, AFLCMC/EBHEC, 586-0535

WAWF 0 1 0

DoDAAC, FA8213

WARP 0 1 0

15. TOTAL 0 2 0

G. PREPARED BY

mccurdy.terry.d.1075978215

H. DATE

2023/04/04

I. APPROVED BY

blanch.teresa.m.1260787809

J. DATE

2023/04/04

18. ESTIMATED

TOTAL PRICE

DD FORM 1423-1, FEB 2001 PREVIOUS EDITION MAY BE USED Page 1 of 1 Pages

17. PRICE GROUP

CONTRACT DATA REQUIREMENTS LIST

(1 Data Item)

Form Approved OMB No. 0704-0188

The public reporting burden for this collection of information is estimated to average 110 hours per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Executive Services Directorate (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. Please do not return your form to the above organization. Send completed form to the Government Issuing Contracting Officer for the Contract/PR No. listed in Block E.

A. CONTRACT LINE ITEM NO. B. EXHIBIT C. CATEGORY:

TDP TM OTHER NDTI

D. SYSTEM/ITEM

1377011376040ES*

E. CONTRACT/PR NO.

FD2020-23-50046

F. CONTRACTOR

1. DATA ITEM NO.

B002

2. TITLE OF DATA ITEM

First Article Qualification Test Plan and Procedures

3. SUBTITLE

Test Plan

4. AUTHORITY (Data Acquisition Document No.)

DI-NDTI-81307A

5. CONTRACT REFERENCE

Airmunitions Specification

6. REQUIRING OFFICE

AFLCMC/EBHJ

7. DD 250 REQ

DD

9. DIST STATEMENT

REQUIRED

B

10. FREQUENCY

ASREQ

12. DATE OF FIRST SUBMISSION

BLK16

14. DISTRIBUTION

a. ADDRESSEE

b. COPIES

8. APP CODE

A

11. AS OF DATE

BLK16

13. DATE OF SUBSEQUENT

SUBMISSION

ASREQ

Draft

Final

Reg Repro

16. REMARKS

BLK 7: The electronic receiving report shall be annotated with the National Stock Number and Nomenclature. Electronic receiving report required via internet Wide Area Work Flow (WAWF) at https://wawf.eb.mil. The electronic receiving report shall be used only for this data item; do not combine other data item submittals with this requirement.

BLK 8: Comments/approval/disapproval will be submitted within 30 calendar days after receipt by AFLCMC/EBHGB. If disapproved, Government Engineer response thru the Government Contracting Officer will include instruction for remediation.

BLK 9: DISTRIBUTION STATEMENT B: Distribution authorized to U.S.

Government agencies (CTI) (Date of Contract Award). Other requests for this document must be referred to AFLCMC/EBHJ.

WARNING -This document contains technical data whose export is restricted by the Arms Export Control Act (Section 2751 of Title 22, U.S.C.) or the Export Control Reform Act of 2018 (Chapter 58 Sections 4801-4852 of Title 50 U.S.C). Violations of these export laws are subject to severe criminal penalties. Disseminate in accordance with the provisions of DoD Directive 5230.25 and DoD Instruction 2040.02.

BLK 10, 11, 12, 13: The contractor shall provide a First Article Qualification Test Plan/Procedures 30 calendar days after contract award. No changes to previously approved First Article Qualification Test Plans/Procedures shall be made without prior approval from AFLCMC/EBHJ Engineering, IAW Airmunitions Specification.

BLK 14: Submit reports electronically via e-mail in Microsoft Office or PDF format to the following e-mail recipients listed below. Refer to contract for e-mail address of the Government Contracting Officer.

Submit through WAWF, DoDAAC, FA8213.

lawrence.kramer.1@us.af.mil (AFLCMC/EBHJ) richard.vigeant@us.af.mil (AFLCMC/EBHJ)

*1377011376039ES, 1377014940468ES,1377014940471ES.

FOB DESTINATION

EBH 23-094-001(23-235-002)

Terry McCurdy, AFLCMC/EBHEC, 586-0535

WAWF 0 1 0

DoDAAC FA8213

AFLCMC/EBHJ 0 1 0

15. TOTAL 0 2 0

G. PREPARED BY

mccurdy.terry.d.1075978215

H. DATE

2023/04/04

I. APPROVED BY

blanch.teresa.m.1260787809

J. DATE

2023/04/04

18. ESTIMATED

TOTAL PRICE

DD FORM 1423-1, FEB 2001 PREVIOUS EDITION MAY BE USED Page 1 of 1 Pages

17. PRICE GROUP

File details come from the government source that posted it. Updated .