10-EXHIBIT 1 - Kitchen Cart Wash Drains.pdf
PDF 696 KB Posted
- Attached to
- Kitchen Cart Wash and Plumbing Modifications
- Solicitation number
- PROJ-26-070
- Issued by
- Volusia County, Florida
About this file
This document is a detailed exhibit for a state and local contract opportunity issued by Halifax Health for kitchen cart wash and plumbing modifications at their Daytona Campus facility in Florida. The project involves comprehensive renovations to the cart wash area and reconfiguration of the plumbing system in the surrounding kitchen facilities. The scope of work includes complete demolition of existing cast iron sanitary lines, installation of new 6-inch pipe and fittings with ChemDrain solution, replacement of clean-outs and drains, removal and disposal of flooring and tile to access piping, installation of multiple trench drains (including two 8-foot trench drains and one 12-inch by 12-inch square drain), concrete infilling of an existing pit measuring 13 feet by 8 feet by 17 inches, and tile replacement matching existing red quarry finishes. The project is organized into five phases plus a mechanical phase, with detailed demolition and construction phases spanning from initial site preparation through final build-out of the new cart wash structure, which includes 6-inch partition walls, floor-to-ceiling FRP wall protection with white finish, a 4-foot by 8-foot clear PVC strip curtain door, stainless steel corner guards, rubber cart stoppers, and connections to existing exhaust and water systems.
The project documents include architectural floor plans with detailed measurements and drainage system schematics showing pipe sizes ranging from 2 inches to 6 inches, clean-outs, and fixture drains throughout the kitchen areas including the salad prep area, food prep, cooler, freezer, dishwashing machine, and scrapping table stations. Critical notes emphasize that all concrete cutting and pouring must be scheduled and follow designated routes, all work must maintain the highest level of infection control as the kitchen will remain in use during construction, and flooring in the washing area must be sloped toward drains for proper drainage. The new cart wash area will include a separate drying section with inclined flooring to accommodate two carts and a washing section with sloped floors directing water toward the drain system. Utility connections include water supply from existing sources with roll-up hose installation and relocation of the existing exhaust fan system to serve the new washing area. The drawings specify Continuum Rigid Sheet wall protection with required top caps, divider bars, and corner trim pieces, and indicate provision for EcoLab cleaning station connections in the cart wash area.
View the file
Other files
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
STORAGE
MENS
MAINTENANCE
STORAGE
STORAGE
LOUNGE
HOLDING
SALAD PREP
COOLER
LINE
RESTROOM
TRAY
JANITOR
OFFICE
STORAGE AREA
POT
MAIL ROOM
MAILROOM
MECHANICAL
WOMENS
LOUNGE
RESTROOM
STOR.
OFFICE
FOOD PREP
FREEZER
COOLER
COLD FOOD
MECHANICAL
ROOM
OFFICE
OFFICE
OFFICE
OFFICE
STORAGE
FUNCTIONSSPECIAL
COOLER
OFFICE
OFFICEOFFICE
STORAGE
MECHANICAL
G R
O U
N D
F L
O O
R H
A L
IF
A
X H
E A
L T
H
D A
Y T
O N
A C
A M
P U
S
A R
E A
O F
S C
O P
E O
F W
O R
K
D A
T E
: 5 /6
/2
SC
A
L E
: 3 /1
6"
'-0
H A
L
IF
A X
H E
A L
T H
D R
A W
N B
Y : A
.R E
Y E
S
T H
IS
D
R A
W
IN
G
IS
N O
T T
O B
E R
E
PR
O D
U
CE
D A
N D
/O R
D
IS
T R
IB
U
T E
D W
IT
H
O U
T W
R
IT
T E
N C
O N
SE
N
T F
R O
M H
A
LI
FA
X
H E
A
LT
H
R E
V
IS
E D
W
N
E
S
AutoCAD SHX Text
UNEXCAVATED
AutoCAD SHX Text H
AutoCAD SHX Text D
AutoCAD SHX Text
SCRAPPING TABLE
AutoCAD SHX Text
DISHWASHING MACHINE
AutoCAD SHX Text 3"
AutoCAD SHX Text S
AutoCAD SHX Text C.0.
AutoCAD SHX Text C.0.
AutoCAD SHX Text C.0.
AutoCAD SHX Text C.0.
AutoCAD SHX Text 6"
AutoCAD SHX Text 6"
AutoCAD SHX Text S
AutoCAD SHX Text 6"
AutoCAD SHX Text S
AutoCAD SHX Text C.0.
AutoCAD SHX Text 2"
AutoCAD SHX Text 2"
AutoCAD SHX Text C.0.
AutoCAD SHX Text 3"
AutoCAD SHX Text C.0.
AutoCAD SHX Text F.D.
AutoCAD SHX Text F.D.
AutoCAD SHX Text F.D.
AutoCAD SHX Text F.D.
AutoCAD SHX Text F.D.
AutoCAD SHX Text C.0.
AutoCAD SHX Text 4"
AutoCAD SHX Text F.D.
AutoCAD SHX Text S
AutoCAD SHX Text 6"
AutoCAD SHX Text F.D.
AutoCAD SHX Text F.D.
AutoCAD SHX Text F.D.
AutoCAD SHX Text 6"
AutoCAD SHX Text C.0.
AutoCAD SHX Text C.0.
AutoCAD SHX Text S
AutoCAD SHX Text C.0.
AutoCAD SHX Text C.0.
AutoCAD SHX Text F.D.
AutoCAD SHX Text F.D.
AutoCAD SHX Text F.D.
AutoCAD SHX Text C.0.
AutoCAD SHX Text 4"
AutoCAD SHX Text F.D.
AutoCAD SHX Text F.D.
AutoCAD SHX Text F.D.
AutoCAD SHX Text 4"
AutoCAD SHX Text F.D.
AutoCAD SHX Text 3"
AutoCAD SHX Text 3"
AutoCAD SHX Text F.D.
AutoCAD SHX Text 3"
AutoCAD SHX Text F.D.
AutoCAD SHX Text 2"
AutoCAD SHX Text F.D.
AutoCAD SHX Text 3"
AutoCAD SHX Text F.D.
AutoCAD SHX Text 3"
AutoCAD SHX Text 3"
AutoCAD SHX Text 3"
AutoCAD SHX Text 3"
AutoCAD SHX Text 4"
AutoCAD SHX Text F.D.
AutoCAD SHX Text F.D.
AutoCAD SHX Text 3"
AutoCAD SHX Text 3"
AutoCAD SHX Text F.D.
AutoCAD SHX Text 4"
AutoCAD SHX Text 3"
AutoCAD SHX Text 3"
AutoCAD SHX Text F.D.
AutoCAD SHX Text S
AutoCAD SHX Text 3"
AutoCAD SHX Text F.D.
AutoCAD SHX Text C.0.
AutoCAD SHX Text 4"
AutoCAD SHX Text C.0.
AutoCAD SHX Text C.0.
AutoCAD SHX Text 3"
AutoCAD SHX Text C.0.
AutoCAD SHX Text S
AutoCAD SHX Text 2"
AutoCAD SHX Text F.D.
AutoCAD SHX Text F.D.
AutoCAD SHX Text 3"
AutoCAD SHX Text F.D.
AutoCAD SHX Text F.D.
AutoCAD SHX Text C.0.
AutoCAD SHX Text F.D.
AutoCAD SHX Text F.D.
AutoCAD SHX Text 3"
AutoCAD SHX Text F.D.
AutoCAD SHX Text 3"
AutoCAD SHX Text 4"
AutoCAD SHX Text C.0.
AutoCAD SHX Text 2"
AutoCAD SHX Text F.D.
AutoCAD SHX Text F.D.
AutoCAD SHX Text C.0.
AutoCAD SHX Text 3"
AutoCAD SHX Text 3"
AutoCAD SHX Text 3"
AutoCAD SHX Text S
AutoCAD SHX Text 6"
AutoCAD SHX Text 3"
AutoCAD SHX Text F.D.
AutoCAD SHX Text F.D.
AutoCAD SHX Text 4"
AutoCAD SHX Text F.D.
AutoCAD SHX Text F.D.
AutoCAD SHX Text 3"
AutoCAD SHX Text 3"
AutoCAD SHX Text F.D.
AutoCAD SHX Text F.D.
AutoCAD SHX Text F.D.
AutoCAD SHX Text F.D.
AutoCAD SHX Text 6"
AutoCAD SHX Text S
AutoCAD SHX Text F.D.
AutoCAD SHX Text 3"
AutoCAD SHX Text F.D.
AutoCAD SHX Text 3"
AutoCAD SHX Text C.0.
AutoCAD SHX Text F.D.
AutoCAD SHX Text 2"
AutoCAD SHX Text 3"
AutoCAD SHX Text F.D.
AutoCAD SHX Text F.S.
AutoCAD SHX Text F.S.
AutoCAD SHX Text F.D.
AutoCAD SHX Text F.S.
AutoCAD SHX Text F.D.
AutoCAD SHX Text C.0.
AutoCAD SHX Text C.0.
AutoCAD SHX Text F.S.
AutoCAD SHX Text F.S.
MENS
MAINTENANCE
STORAGE
STORAGE
LOUNGE
SALAD PREP
COOLER
LINE
RESTROOM
TRAY
JANITOR
OFFICE
STORAGE AREA
POT
MAIL ROOM
MAILROOM
WOMENS
LOUNGE
RESTROOM
STOR.
OFFICE
FOOD PREP
FREEZER
COOLER
COLD FOOD
MECHANICAL
ROOM
OFFICE
OFFICE
OFFICE
OFFICE
STORAGE
FUNCTIONSSPECIAL
COOLER
OFFICE
OFFICEOFFICE
STORAGE
G R
O U
N D
F L
O O
R H
A L
IF
A
X H
E A
L T
H
D A
Y T
O N
A C
A M
P U
S
G E
N E
R A
L S
C O
P E
O F
W O
R K
D A
T E
: J U
N E
5, SC
A
L E
: 1 /8
'-0
H A
L
IF
A X
H E
A L
T H
D R
A W
N B
Y : C
. M O
O R
E
T H
IS
D
R A
W
IN
G
IS
N O
T T
O B
E R
E
PR
O D
U
CE
D A
N D
/O R
D
IS
T R
IB
U
T E
D W
IT
H
O U
T W
R
IT
T E
N C
O N
SE
N
T F
R O
M H
A
LI
FA
X
H E
A
LT
H
R E
V
IS
E D
W
N
E
S
GENERAL NOTES
LEGEND
AutoCAD SHX Text
UNEXCAVATED
AutoCAD SHX Text H
AutoCAD SHX Text D
AutoCAD SHX Text
SCRAPPING TABLE
AutoCAD SHX Text
DISHWASHING MACHINE
AutoCAD SHX Text 3"
AutoCAD SHX Text S
AutoCAD SHX Text C.0.
AutoCAD SHX Text C.0.
AutoCAD SHX Text C.0.
AutoCAD SHX Text C.0.
AutoCAD SHX Text 6"
AutoCAD SHX Text 6"
AutoCAD SHX Text S
AutoCAD SHX Text 6"
AutoCAD SHX Text S
AutoCAD SHX Text C.0.
AutoCAD SHX Text 2"
AutoCAD SHX Text 2"
AutoCAD SHX Text C.0.
AutoCAD SHX Text 3"
AutoCAD SHX Text C.0.
AutoCAD SHX Text F.D.
AutoCAD SHX Text F.D.
AutoCAD SHX Text F.D.
AutoCAD SHX Text F.D.
AutoCAD SHX Text F.D.
AutoCAD SHX Text C.0.
AutoCAD SHX Text 4"
AutoCAD SHX Text F.D.
AutoCAD SHX Text S
AutoCAD SHX Text 6"
AutoCAD SHX Text F.D.
AutoCAD SHX Text F.D.
AutoCAD SHX Text F.D.
AutoCAD SHX Text 6"
AutoCAD SHX Text C.0.
AutoCAD SHX Text C.0.
AutoCAD SHX Text S
AutoCAD SHX Text C.0.
AutoCAD SHX Text C.0.
AutoCAD SHX Text F.D.
AutoCAD SHX Text F.D.
AutoCAD SHX Text F.D.
AutoCAD SHX Text C.0.
AutoCAD SHX Text 4"
AutoCAD SHX Text F.D.
AutoCAD SHX Text F.D.
AutoCAD SHX Text F.D.
AutoCAD SHX Text 4"
AutoCAD SHX Text F.D.
AutoCAD SHX Text 3"
AutoCAD SHX Text 3"
AutoCAD SHX Text F.D.
AutoCAD SHX Text 3"
AutoCAD SHX Text F.D.
AutoCAD SHX Text 2"
AutoCAD SHX Text 3"
AutoCAD SHX Text 3"
AutoCAD SHX Text 3"
AutoCAD SHX Text 3"
AutoCAD SHX Text 4"
AutoCAD SHX Text F.D.
AutoCAD SHX Text F.D.
AutoCAD SHX Text 3"
AutoCAD SHX Text 3"
AutoCAD SHX Text 4"
AutoCAD SHX Text 3"
AutoCAD SHX Text 3"
AutoCAD SHX Text F.D.
AutoCAD SHX Text S
AutoCAD SHX Text 3"
AutoCAD SHX Text F.D.
AutoCAD SHX Text C.0.
AutoCAD SHX Text 4"
AutoCAD SHX Text C.0.
AutoCAD SHX Text C.0.
AutoCAD SHX Text 3"
AutoCAD SHX Text C.0.
AutoCAD SHX Text S
AutoCAD SHX Text 2"
AutoCAD SHX Text F.D.
AutoCAD SHX Text F.D.
AutoCAD SHX Text 3"
AutoCAD SHX Text F.D.
AutoCAD SHX Text F.D.
AutoCAD SHX Text C.0.
AutoCAD SHX Text F.D.
AutoCAD SHX Text F.D.
AutoCAD SHX Text 3"
AutoCAD SHX Text F.D.
AutoCAD SHX Text 3"
AutoCAD SHX Text 4"
AutoCAD SHX Text C.0.
AutoCAD SHX Text 2"
AutoCAD SHX Text F.D.
AutoCAD SHX Text F.D.
AutoCAD SHX Text C.0.
AutoCAD SHX Text 3"
AutoCAD SHX Text 3"
AutoCAD SHX Text S
AutoCAD SHX Text 6"
AutoCAD SHX Text 3"
AutoCAD SHX Text F.D.
AutoCAD SHX Text F.D.
AutoCAD SHX Text 4"
AutoCAD SHX Text F.D.
AutoCAD SHX Text F.D.
AutoCAD SHX Text 3"
AutoCAD SHX Text 3"
AutoCAD SHX Text F.D.
AutoCAD SHX Text F.D.
AutoCAD SHX Text F.D.
AutoCAD SHX Text F.D.
AutoCAD SHX Text 6"
AutoCAD SHX Text S
AutoCAD SHX Text F.D.
AutoCAD SHX Text 3"
AutoCAD SHX Text F.D.
AutoCAD SHX Text 3"
AutoCAD SHX Text C.0.
AutoCAD SHX Text F.D.
AutoCAD SHX Text 2"
AutoCAD SHX Text 3"
AutoCAD SHX Text F.D.
AutoCAD SHX Text F.S.
AutoCAD SHX Text F.S.
AutoCAD SHX Text F.D.
AutoCAD SHX Text F.S.
AutoCAD SHX Text F.D.
AutoCAD SHX Text C.0.
AutoCAD SHX Text C.0.
AutoCAD SHX Text F.S.
AutoCAD SHX Text F.S.
AutoCAD SHX Text C.0.
AutoCAD SHX Text NOTES FOR AREAS: 1. REMOVAL AND DISPOSAL OF REMOVAL AND DISPOSAL OF FLOORING/ TILE TO ACCESS PIPING AND DRAINS 2. COMPLETE DEMO OF CAST IRON COMPLETE DEMO OF CAST IRON SANITARY LINE IN REFERENCED AREAS 3. FURNISH AND INSTALL NEW 6" FURNISH AND INSTALL NEW 6" PIPE AND FITTINGS, ALL WITH CHEMDRAIN SOLUTION 4. REPLACE ALL EXISTING CLEAN REPLACE ALL EXISTING CLEAN OUTS AND DRAINS IN THE REFERENCED AREAS 5. PROVIDE FITTINGS TO CONNECT PROVIDE FITTINGS TO CONNECT TO EXISTING PIPING 6. REPLACEMENT OF TILE TO REPLACEMENT OF TILE TO MATCH EXISTING
AutoCAD SHX Text A
AutoCAD SHX Text B
AutoCAD SHX Text C
AutoCAD SHX Text D
AutoCAD SHX Text F
AutoCAD SHX Text E
AutoCAD SHX Text B
AutoCAD SHX Text E
AutoCAD SHX Text F
AutoCAD SHX Text A
AutoCAD SHX Text NOTES FOR AREA: 1. REMOVAL AND DISPOSAL OF REMOVAL AND DISPOSAL OF FLOORING/ TILE FOR INSTALLATION OF NEW 8' TRENCH DRAIN 2. INSTALLATION OF TRENCH DRAIN INSTALLATION OF TRENCH DRAIN FOR TEMPORARY WASH AREA 3. REPLACEMENT OF TILE TO REPLACEMENT OF TILE TO MATCH EXISTING 4. INSTALLATION OF FLOOR TO INSTALLATION OF FLOOR TO CEILING WALL PROTECTION
AutoCAD SHX Text NOTES FOR AREA: 1. REMOVAL AND DISPOSAL OF EXISTING CART WASH REMOVAL AND DISPOSAL OF EXISTING CART WASH 2. REMOVAL AND DISPOSAL OF FLOORING/ TILE, EXISTING REMOVAL AND DISPOSAL OF FLOORING/ TILE, EXISTING PLUMBING AND ELECTRICAL CONNECTIONS BACK TO SOURCE FOR TWO NEW 8' TRENCH DRAINS AND ONE 12"X12"DRAIN 3. INFILL EXISTING WASHER PIT WITH CONCRETE INFILL EXISTING WASHER PIT WITH CONCRETE 4. INSTALLATION OF NEW DRAINS AND SLOPE FLOORING IN INSTALLATION OF NEW DRAINS AND SLOPE FLOORING IN DIRECTION OF EACH DRAIN 5. REPLACEMENT OF TILE TO MATCH EXISTING REPLACEMENT OF TILE TO MATCH EXISTING 6. INSTALLATION OF FLOOR TO CEILING WALL PROTECTION INSTALLATION OF FLOOR TO CEILING WALL PROTECTION 7. BUILD/ INSTALL NEW WASH ROOMBUILD/ INSTALL NEW WASH ROOM
AutoCAD SHX Text C
AutoCAD SHX Text D
AutoCAD SHX Text C
AutoCAD SHX Text D
CONNECTION TO EXISTING
HOT WATER SUPPLY 1963
MENS
MAINTENANCE
STORAGE
STORAGE
LOUNGE
HOLDING
SALAD PREP
COOLER
LINE
RESTROOM
TRAY
JANITOR
OFFICE
STORAGE AREA
POT
OFFICE
OFFICE
MAIL ROOM
MAILROOM
OXYGEN
ELECTRICAL
MECHANICAL
SALT ROOM/
WOMENS
LOUNGE
RESTROOM
STOR.
OFFICE
FOOD PREP
FREEZER
COOLER
CHEMICALS
COLD FOOD
MECHANICAL
ROOM
OFFICE
OFFICE
OFFICE
OFFICE
STORAGE
FUNCTIONSSPECIAL
COOLER
OFFICE
OFFICE
OFFICEOFFICE
STORAGE
DIETARY
OPERATIONS
STORAGE
FACILITIES
G R
O U
N D
F L
O O
R H
A L
IF
A
X H
E A
L T
H
D A
Y T
O N
A C
A M
P U
S
P H
A
SI
N G
P L
A N
D A
T E
: J U
N E
5, SC
A
L E
: 1 /8
'-0
H A
L
IF
A X
H E
A L
T H
D R
A W
N B
Y : C
. M O
O R
E
T H
IS
D
R A
W
IN
G
IS
N O
T T
O B
E R
E
PR
O D
U
CE
D A
N D
/O R
D
IS
T R
IB
U
T E
D W
IT
H
O U
T W
R
IT
T E
N C
O N
SE
N
T F
R O
M H
A
LI
FA
X
H E
A
LT
H
R E
V
IS
E D
W
N
E
S
KEY NOTES
LEGEND
AutoCAD SHX Text
UNEXCAVATED
AutoCAD SHX Text H
AutoCAD SHX Text D
AutoCAD SHX Text
SCRAPPING TABLE
AutoCAD SHX Text
DISHWASHING MACHINE
AutoCAD SHX Text 3"
AutoCAD SHX Text S
AutoCAD SHX Text C.0.
AutoCAD SHX Text C.0.
AutoCAD SHX Text C.0.
AutoCAD SHX Text C.0.
AutoCAD SHX Text 6"
AutoCAD SHX Text 6"
AutoCAD SHX Text 6"
AutoCAD SHX Text S
AutoCAD SHX Text 6"
AutoCAD SHX Text S
AutoCAD SHX Text C.0.
AutoCAD SHX Text 2"
AutoCAD SHX Text 2"
AutoCAD SHX Text C.0.
AutoCAD SHX Text 3"
AutoCAD SHX Text C.0.
AutoCAD SHX Text F.D.
AutoCAD SHX Text F.D.
AutoCAD SHX Text F.D.
AutoCAD SHX Text F.D.
AutoCAD SHX Text F.D.
AutoCAD SHX Text C.0.
AutoCAD SHX Text 4"
AutoCAD SHX Text F.D.
AutoCAD SHX Text S
AutoCAD SHX Text 6"
AutoCAD SHX Text F.D.
AutoCAD SHX Text F.D.
AutoCAD SHX Text F.D.
AutoCAD SHX Text 6"
AutoCAD SHX Text C.0.
AutoCAD SHX Text C.0.
AutoCAD SHX Text S
AutoCAD SHX Text C.0.
AutoCAD SHX Text C.0.
AutoCAD SHX Text F.D.
AutoCAD SHX Text F.D.
AutoCAD SHX Text F.D.
AutoCAD SHX Text C.0.
AutoCAD SHX Text 4"
AutoCAD SHX Text F.D.
AutoCAD SHX Text F.D.
AutoCAD SHX Text F.D.
AutoCAD SHX Text 4"
AutoCAD SHX Text F.D.
AutoCAD SHX Text 3"
AutoCAD SHX Text 3"
AutoCAD SHX Text F.D.
AutoCAD SHX Text 3"
AutoCAD SHX Text F.D.
AutoCAD SHX Text 2"
AutoCAD SHX Text F.D.
AutoCAD SHX Text 3"
AutoCAD SHX Text 3"
AutoCAD SHX Text F.D.
AutoCAD SHX Text F.D.
AutoCAD SHX Text 3"
AutoCAD SHX Text 3"
AutoCAD SHX Text 3"
AutoCAD SHX Text 3"
AutoCAD SHX Text 4"
AutoCAD SHX Text F.D.
AutoCAD SHX Text F.D.
AutoCAD SHX Text 3"
AutoCAD SHX Text 3"
AutoCAD SHX Text F.D.
AutoCAD SHX Text 4"
AutoCAD SHX Text 3"
AutoCAD SHX Text 3"
AutoCAD SHX Text F.D.
AutoCAD SHX Text S
AutoCAD SHX Text 3"
AutoCAD SHX Text F.D.
AutoCAD SHX Text C.0.
AutoCAD SHX Text 4"
AutoCAD SHX Text C.0.
AutoCAD SHX Text C.0.
AutoCAD SHX Text 3"
AutoCAD SHX Text C.0.
AutoCAD SHX Text S
AutoCAD SHX Text 2"
AutoCAD SHX Text F.D.
AutoCAD SHX Text F.D.
AutoCAD SHX Text 3"
AutoCAD SHX Text F.D.
AutoCAD SHX Text F.D.
AutoCAD SHX Text C.0.
AutoCAD SHX Text F.D.
AutoCAD SHX Text F.D.
AutoCAD SHX Text 3"
AutoCAD SHX Text F.D.
AutoCAD SHX Text 3"
AutoCAD SHX Text 4"
AutoCAD SHX Text C.0.
AutoCAD SHX Text 2"
AutoCAD SHX Text F.D.
AutoCAD SHX Text F.D.
AutoCAD SHX Text F.D.
AutoCAD SHX Text C.0.
AutoCAD SHX Text 3"
AutoCAD SHX Text 3"
AutoCAD SHX Text C.0.
AutoCAD SHX Text 3"
AutoCAD SHX Text 3"
AutoCAD SHX Text S
AutoCAD SHX Text 6"
AutoCAD SHX Text 3"
AutoCAD SHX Text F.D.
AutoCAD SHX Text F.D.
AutoCAD SHX Text 4"
AutoCAD SHX Text F.D.
AutoCAD SHX Text F.D.
AutoCAD SHX Text 3"
AutoCAD SHX Text 3"
AutoCAD SHX Text F.D.
AutoCAD SHX Text S
AutoCAD SHX Text S
AutoCAD SHX Text F.D.
AutoCAD SHX Text F.D.
AutoCAD SHX Text F.D.
AutoCAD SHX Text 6"
AutoCAD SHX Text S
AutoCAD SHX Text F.D.
AutoCAD SHX Text 3"
AutoCAD SHX Text F.D.
AutoCAD SHX Text 3"
AutoCAD SHX Text C.0.
AutoCAD SHX Text F.D.
AutoCAD SHX Text 2"
AutoCAD SHX Text 3"
AutoCAD SHX Text F.D.
AutoCAD SHX Text F.S.
AutoCAD SHX Text F.S.
AutoCAD SHX Text F.D.
AutoCAD SHX Text F.S.
AutoCAD SHX Text F.D.
AutoCAD SHX Text C.0.
AutoCAD SHX Text C.0.
AutoCAD SHX Text F.S.
AutoCAD SHX Text F.S.
AutoCAD SHX Text
1. COMPLETE DEMO OF CAST IRON SANITARY LINE IN REFERENCED AREAS COMPLETE DEMO OF CAST IRON SANITARY LINE IN REFERENCED AREAS 2. FURNISH AND INSTALL NEW 6" PIPE AND FITTINGS, ALL WITH CHEMDRAIN SOLUTION FURNISH AND INSTALL NEW 6" PIPE AND FITTINGS, ALL WITH CHEMDRAIN SOLUTION 3. REPLACE ALL EXISTING CLEAN OUTS AND DRAINS IN THE REFERENCED AREAS REPLACE ALL EXISTING CLEAN OUTS AND DRAINS IN THE REFERENCED AREAS 4. AREA MUST BE TREATED WITH THE HIGHEST LEVEL OF INFECTION CONTROL AS THE KITCHEN WILL BE IN USE. AREA MUST BE TREATED WITH THE HIGHEST LEVEL OF INFECTION CONTROL AS THE KITCHEN WILL BE IN USE. 5. ALL CONCRETE CUTTING AND POURING MUST BE SCHEDULED AND MUST FOLLOW THE ROUTE PROVIDED. ALL CONCRETE CUTTING AND POURING MUST BE SCHEDULED AND MUST FOLLOW THE ROUTE PROVIDED.
AutoCAD SHX Text
DEMO PHASE 1A PHASE 1B PHASE 2A PHASE 2B PHASE 3
PHASE 4 PHASE 5A PHASE 5B
MECHANICAL
G R
O U
N D
F L
O O
R H
A L
IF
A
X H
E A
L T
H
D A
Y T
O N
A C
A M
P U
S
D E
M O
P
H A
SE
D A
T E
: J U
N E
5, SC
A
L E
: 1 /2
'-0
H A
L
IF
A X
H E
A L
T H
D R
A W
N B
Y : C
. M O
O R
E
T H
IS
D
R A
W
IN
G
IS
N O
T T
O B
E R
E
PR
O D
U
CE
D A
N D
/O R
D
IS
T R
IB
U
T E
D W
IT
H
O U
T W
R
IT
T E
N C
O N
SE
N
T F
R O
M H
A
LI
FA
X
H E
A
LT
H
R E
V
IS
E D
W
N
E
S
KEY NOTES LEGEND
PHASE 2 AREA PHASE 3 AREA
AutoCAD SHX Text H
AutoCAD SHX Text D
AutoCAD SHX Text
SCRAPPING TABLE
AutoCAD SHX Text
DISHWASHING MACHINE
AutoCAD SHX Text 3"
AutoCAD SHX Text C.0.
AutoCAD SHX Text 4"
AutoCAD SHX Text F.D.
AutoCAD SHX Text F.D.
AutoCAD SHX Text F.D.
AutoCAD SHX Text F.D.
AutoCAD SHX Text F.D.
AutoCAD SHX Text F.D.
AutoCAD SHX Text F.D.
AutoCAD SHX Text F.D.
AutoCAD SHX Text F.D.
AutoCAD SHX Text F.D.
AutoCAD SHX Text 3"
AutoCAD SHX Text F.D.
AutoCAD SHX Text F.D.
AutoCAD SHX Text F.D.
AutoCAD SHX Text 3"
AutoCAD SHX Text 4"
AutoCAD SHX Text F.D.
AutoCAD SHX Text 3"
AutoCAD SHX Text 3"
AutoCAD SHX Text C.0.
AutoCAD SHX Text F.D.
AutoCAD SHX Text 3"
AutoCAD SHX Text
1. COMPLETE DEMO OF CAST IRON SANITARY LINE IN REFERENCED AREAS COMPLETE DEMO OF CAST IRON SANITARY LINE IN REFERENCED AREAS 2. FURNISH AND INSTALL ALL PIPE AND FITTING WITH CHEMDRAIN SOLUTION FURNISH AND INSTALL ALL PIPE AND FITTING WITH CHEMDRAIN SOLUTION 3. REPLACE ALL EXISTING CLEAN OUTS AND DRAINS IN THE REFERENCED AREAS REPLACE ALL EXISTING CLEAN OUTS AND DRAINS IN THE REFERENCED AREAS 4. UNINSTALL AND RELOCATE SINK TO EXISTING UTILITIES IN PHASE 3 AREA FOR UNINSTALL AND RELOCATE SINK TO EXISTING UTILITIES IN PHASE 3 AREA FOR TEMPORARY USE DURING CONSTRUCTION. 5. AREA MUST TREATED WITH THE HIGHEST LEVEL OF INFECTION CONTROL AS THE AREA MUST TREATED WITH THE HIGHEST LEVEL OF INFECTION CONTROL AS THE KITCHEN WILL BE IN USE. 6. ALL CONCRETE CUTTING AND POURING MUST BE SCHEDULED AND MUST FOLLOW THE ALL CONCRETE CUTTING AND POURING MUST BE SCHEDULED AND MUST FOLLOW THE ROUTE PROVIDED.
DEMO SINK TO RELOCATE TEMP AREA FOR SINK
R
O U
N D
F L
O O
R H
A L
IF
A
X H
E A
L T
H
D A
Y T
O N
A C
A M
P U
S
D E
M O
P
H A
SE
D A
T E
: J U
N E
5, SC
A
L E
: 3 /4
'-0
H A
L
IF
A X
H E
A L
T H
D R
A W
N B
Y : C
. M O
O R
E
T H
IS
D
R A
W
IN
G
IS
N O
T T
O B
E R
E
PR
O D
U
CE
D A
N D
/O R
D
IS
T R
IB
U
T E
D W
IT
H
O U
T W
R
IT
T E
N C
O N
SE
N
T F
R O
M H
A
LI
FA
X
H E
A
LT
H
R E
V
IS
E D
W
N
E
S
KEY NOTES LEGEND
AutoCAD SHX Text 7'-7"
AutoCAD SHX Text 3'-6"
AutoCAD SHX Text 10'-9"
AutoCAD SHX Text 5'-0 "14"
AutoCAD SHX Text 11'-5 "14"
AutoCAD SHX Text 10'-8"
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
1. REMOVAL OF THE EXISTING METAL WALL PROTECTION. REMOVAL OF THE EXISTING METAL WALL PROTECTION. -WALL TO BE PREPARED FOR THE INSTALLATION OF FLOOR TO CEILING WALL PROTECTION -CONTINUUM RIGID SHEET- COLOR WHITE-THICKNESS 0.080-WITH REQUIRED TOP CAP, DIVIDER BAR, INSIDE CORNER AND OUTSIDE CORNER TRIM PIECES. 2. REMOVAL OF EXISTING DRAIN AND TILE FOR THE INSTALLATION OF A NEW 8' TRENCH REMOVAL OF EXISTING DRAIN AND TILE FOR THE INSTALLATION OF A NEW 8' TRENCH DRAIN.FLOOR MUST SLOPE IN THE DIRECTION OF THE NEW DRAIN.TILE TO MATCH EXISTING - RED QUARRY. 3. ADD VALVES FOR THE WATER LINES TO CONNECT A HOSE AND DEMO/ CAP ANY ADD VALVES FOR THE WATER LINES TO CONNECT A HOSE AND DEMO/ CAP ANY ABANDONED PIPING BACK TO SOURCE 4. REMOVAL OF SINK AND DEMO/ CAP PIPING BACK TO SOURCE REMOVAL OF SINK AND DEMO/ CAP PIPING BACK TO SOURCE 5. REMOVAL OF 7 FT OF TRAY LINE REMOVAL OF 7 FT OF TRAY LINE
DEMO
O U
N D
F L
O O
R H
A L
IF
A
X H
E A
L T
H
D A
Y T
O N
A C
A M
P U
S
D E
M O
P
H A
SE
D A
T E
: 5 /8
/2
SC
A
L E
: 3 /4
'-0
H A
L
IF
A X
H E
A L
T H
D R
A W
N B
Y : A
. R E
Y E
S
T H
IS
D
R A
W
IN
G
IS
N O
T T
O B
E R
E
PR
O D
U
CE
D A
N D
/O R
D
IS
T R
IB
U
T E
D W
IT
H
O U
T W
R
IT
T E
N C
O N
SE
N
T F
R O
M H
A
LI
FA
X
H E
A
LT
H
R E
V
IS
E D
W
N
E
S
KEY NOTES LEGEND
AutoCAD SHX Text H
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
CART WASHER
AutoCAD SHX Text
1. REMOVAL OF THE EXISTING CART WASH - TURNKEY REMOVAL OF THE EXISTING CART WASH - TURNKEY REMOVAL OF ALL EXISTING PLUMBING AND ELECTRICAL CONNECTIONS TO THE EXISTING CART WASH BACK TO SOURCE. 2. AREA WILL BE UNDER DEMO FOR PLUMBING RENOVATIONS FOR NEW CART WASH AREA WILL BE UNDER DEMO FOR PLUMBING RENOVATIONS FOR NEW CART WASH DEMO OF WALL MOUNTED TILE BASE. DEMO OF EXISTING WALL PROTECTION IN BOTH WALLS. 3. DEMO OF CONCRETE TO FIND PLUMBING CONNECTION FOR THE INSTALLATION OF TWO DEMO OF CONCRETE TO FIND PLUMBING CONNECTION FOR THE INSTALLATION OF TWO NEW 8' TRENCH DRAINS AND ONE SQUARE 12" X 12" DRAIN. SLOPE FLOORS IN THE DIRECTION OF EACH DRAIN AND REPLACE TILE WITH EXISTING RED QUARRY. 4. DEMO OLD DECOMMISSIONED ELECTRICAL BOX BACK TO SOURCEDEMO OLD DECOMMISSIONED ELECTRICAL BOX BACK TO SOURCE
AutoCAD SHX Text
DEMO
AutoCAD SHX Text
DEMO TO PLACE TRENCH DRAIN
AutoCAD SHX Text
EXISTING CART WASHER
AutoCAD SHX Text
WALL PROTECTION
AutoCAD SHX Text
ELECTRICAL TO BE REMOVED
AutoCAD SHX Text
CART WASH ELECTRICAL
DECOMMISSIONED ELECTRICAL BOX
LINE
TRAY
OFFICE
OFFICE
G R
O U
N D
F L
O O
R H
A L
IF
A
X H
E A
L T
H
D A
Y T
O N
A C
A M
P U
S
D E
M O
P
H A
SE
D A
T E
: J U
N E
5, SC
A
L E
: 3 /8
'-0
H A
L
IF
A X
H E
A L
T H
D R
A W
N B
Y : C
. M O
O R
E
T H
IS
D
R A
W
IN
G
IS
N O
T T
O B
E R
E
PR
O D
U
CE
D A
N D
/O R
D
IS
T R
IB
U
T E
D W
IT
H
O U
T W
R
IT
T E
N C
O N
SE
N
T F
R O
M H
A
LI
FA
X
H E
A
LT
H
R E
V
IS
E D
W
N
E
S
LEGENDKEY NOTES
AutoCAD SHX Text C.0.
AutoCAD SHX Text S
AutoCAD SHX Text C.0.
AutoCAD SHX Text 2"
AutoCAD SHX Text 2"
AutoCAD SHX Text C.0.
AutoCAD SHX Text 3"
AutoCAD SHX Text C.0.
AutoCAD SHX Text F.D.
AutoCAD SHX Text F.D.
AutoCAD SHX Text F.D.
AutoCAD SHX Text S
AutoCAD SHX Text 6"
AutoCAD SHX Text F.D.
AutoCAD SHX Text F.D.
AutoCAD SHX Text F.D.
AutoCAD SHX Text 6"
AutoCAD SHX Text C.0.
AutoCAD SHX Text F.D.
AutoCAD SHX Text 3"
AutoCAD SHX Text 4"
AutoCAD SHX Text 3"
AutoCAD SHX Text S
AutoCAD SHX Text C.0.
AutoCAD SHX Text 4"
AutoCAD SHX Text 4"
AutoCAD SHX Text F.D.
AutoCAD SHX Text F.D.
AutoCAD SHX Text 3"
AutoCAD SHX Text 3"
AutoCAD SHX Text F.D.
AutoCAD SHX Text 6"
AutoCAD SHX Text S
AutoCAD SHX Text C.0.
AutoCAD SHX Text
DEMO
1. COMPLETE DEMO OF CAST IRON SANITARY LINE IN REFERENCED AREAS COMPLETE DEMO OF CAST IRON SANITARY LINE IN REFERENCED AREAS 2. FURNISH AND INSTALL ALL PIPE AND FITTING WITH CHEMDRAIN SOLUTION FURNISH AND INSTALL ALL PIPE AND FITTING WITH CHEMDRAIN SOLUTION 3. REPLACE ALL EXISTING CLEAN OUTS AND DRAINS IN THE REFERENCED AREAS REPLACE ALL EXISTING CLEAN OUTS AND DRAINS IN THE REFERENCED AREAS 4. REMOVE, REPLACE AND LEVEL FLOORING FOR PROPER DRAINAGE IN HATCHED AREA REMOVE, REPLACE AND LEVEL FLOORING FOR PROPER DRAINAGE IN HATCHED AREA 5. AREA MUST TREATED WITH THE HIGHEST LEVEL OF INFECTION CONTROL AS THE KITCHEN AREA MUST TREATED WITH THE HIGHEST LEVEL OF INFECTION CONTROL AS THE KITCHEN WILL BE IN USE. 6. ALL CONCRETE CUTTING AND POURING MUST BE SCHEDULED AND MUST FOLLOW THE ALL CONCRETE CUTTING AND POURING MUST BE SCHEDULED AND MUST FOLLOW THE ROUTE PROVIDED.
O U
N D
F L
O O
R H
A L
IF
A
X H
E A
L T
H
D A
Y T
O N
A C
A M
P U
S
P H
A
SE
-C
O N
ST
R
U C
T
IO
N
D A
T E
: J U
N E
5, SC
A
L E
: 3 /4
'-0
H A
L
IF
A X
H E
A L
T H
D R
A W
N B
Y : C
. M O
O R
E
T H
IS
D
R A
W
IN
G
IS
N O
T T
O B
E R
E
PR
O D
U
CE
D A
N D
/O R
D
IS
T R
IB
U
T E
D W
IT
H
O U
T W
R
IT
T E
N C
O N
SE
N
T F
R O
M H
A
LI
FA
X
H E
A
LT
H
R E
V
IS
E D
W
N
E
S
KEY NOTES LEGEND
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
1. INSTALLMENT OF FLOOR TO CEILING FRP WALL PROTECTION INSTALLMENT OF FLOOR TO CEILING FRP WALL PROTECTION -CONTINUUM RIGID SHEET- COLOR WHITE-THICKNESS 0.080-WITH REQUIRED TOP CAP, DIVIDER BAR, INSIDE CORNER AND OUTSIDE CORNER TRIM PIECES. 2. INSTALLMENT OF A TRENCH DRAIN IN AREA- WILL BE INSTALLMENT OF A TRENCH DRAIN IN AREA- WILL BE TEMPORARY CART WASH CLEANING AREA DURING DEMO AND CONSTRUCTION OF THE NEW CART WASH AREA 3. INSTALLMENT OF THE MOTOR FOR THE TRAY LINE, TRAY LINE INSTALLMENT OF THE MOTOR FOR THE TRAY LINE, TRAY LINE MUST BE FUNCTIONAL
AutoCAD SHX Text
INSTALLMENT OF WALL PROTECTION
AutoCAD SHX Text
LOCATION OF THE TRENCH DRAIN
LOCATION OF THE TRAY LINE MOTOR
MECHANICAL
ROOM
G R
O U
N D
F L
O O
R H
A L
IF
A
X H
E A
L T
H
D A
Y T
O N
A C
A M
P U
S
P H
A
SE
IN
F
IL
L
D A
T E
: J 5/
8/
SC
A
L E
: 1 /2
'-0
H A
L
IF
A X
H E
A L
T H
D R
A W
N B
Y : A
. R E
Y E
S
T H
IS
D
R A
W
IN
G
IS
N O
T T
O B
E R
E
PR
O D
U
CE
D A
N D
/O R
D
IS
T R
IB
U
T E
D W
IT
H
O U
T W
R
IT
T E
N C
O N
SE
N
T F
R O
M H
A
LI
FA
X
H E
A
LT
H
R E
V
IS
E D
W
N
E
S
KEY NOTES LEGEND
AutoCAD SHX Text H
AutoCAD SHX Text
DISHWASHING MACHINE
AutoCAD SHX Text 12'-10"
AutoCAD SHX Text 8'-1"
AutoCAD SHX Text
1. INFILL 13 FT X 8 FT X 17 IN PIT WITH CONCRETE INFILL 13 FT X 8 FT X 17 IN PIT WITH CONCRETE 2. PLACE TILE TO COVER AREA WITH EXISTING RED QUARRY PLACE TILE TO COVER AREA WITH EXISTING RED QUARRY 3. INSTALLMENT OF FLOOR TO CEILING FRP WALL PROTECTION INSTALLMENT OF FLOOR TO CEILING FRP WALL PROTECTION -CONTINUUM RIGID SHEET- COLOR WHITE-THICKNESS 0.080-WITH REQUIRED TOP CAP, DIVIDER BAR, INSIDE CORNER AND OUTSIDE CORNER TRIM PIECES.
AutoCAD SHX Text
AREA THAT MUST BE INFILL
WALL PROTECTION
O U
N D
F L
O O
R H
A L
IF
A
X H
E A
L T
H
D A
Y T
O N
A C
A M
P U
S
P H
A
SE
P L
U M
B
IN
G
D A
T E
: 5 /8
/2
SC
A
L E
: 3 /4
'-0
H A
L
IF
A X
H E
A L
T H
D R
A W
N B
Y : A
. R E
Y E
S
T H
IS
D
R A
W
IN
G
IS
N O
T T
O B
E R
E
PR
O D
U
CE
D A
N D
/O R
D
IS
T R
IB
U
T E
D W
IT
H
O U
T W
R
IT
T E
N C
O N
SE
N
T F
R O
M H
A
LI
FA
X
H E
A
LT
H
R E
V
IS
E D
W
N
E
S
KEY NOTES LEGEND
AutoCAD SHX Text 8'
AutoCAD SHX Text 8'
AutoCAD SHX Text 1'-0 "34"
AutoCAD SHX Text 9'-4 "34"
AutoCAD SHX Text 2'-5 "14"
AutoCAD SHX Text 3'-11 "14"
AutoCAD SHX Text 4'-11 "12"
AutoCAD SHX Text 4'-11"
AutoCAD SHX Text 1'-2"
AutoCAD SHX Text
1. INSTALL (2) 8' TRENCH DRAINS AND (1) 12 IN X 12 IN INSTALL (2) 8' TRENCH DRAINS AND (1) 12 IN X 12 IN SQUARE DRAIN 2. SLOPE FLOORS IN DIRECTION TOWARDS THE DRAIN AND SLOPE FLOORS IN DIRECTION TOWARDS THE DRAIN AND AWAY FROM THE WALL. 3. PLACE TILES THAT MATCH EXISTING- RED QUARRYPLACE TILES THAT MATCH EXISTING- RED QUARRY
LOCATION OF THE PROPOSED DRAINS
O U
N D
F L
O O
R H
A L
IF
A
X H
E A
L T
H
D A
Y T
O N
A C
A M
P U
S
P H
A
SE
B U
IL
T
I N
S T
R U
C T
U R
E
D A
T E
: 5 /8
/2
SC
A
L E
: 3 /4
'-0
H A
L
IF
A X
H E
A L
T H
D R
A W
N B
Y : A
. R E
Y E
S
T H
IS
D
R A
W
IN
G
IS
N O
T T
O B
E R
E
PR
O D
U
CE
D A
N D
/O R
D
IS
T R
IB
U
T E
D W
IT
H
O U
T W
R
IT
T E
N C
O N
SE
N
T F
R O
M H
A
LI
FA
X
H E
A
LT
H
R E
V
IS
E D
W
N
E
S
KEY NOTES
LEGEND
AutoCAD SHX Text 20'-6"
AutoCAD SHX Text 10'
AutoCAD SHX Text 4'
AutoCAD SHX Text 4'
AutoCAD SHX Text 2'-6"
AutoCAD SHX Text 1'
AutoCAD SHX Text 6"
AutoCAD SHX Text 4'-6"
AutoCAD SHX Text 6"
AutoCAD SHX Text 6"
AutoCAD SHX Text 9'-6 "12"
AutoCAD SHX Text 5"
AutoCAD SHX Text 9'-6 "12"
AutoCAD SHX Text 4'
AutoCAD SHX Text 8'-3 "12"
AutoCAD SHX Text 2'-3 "14"
AutoCAD SHX Text 2'-9 "12"
AutoCAD SHX Text 1'-6"
AutoCAD SHX Text 9'
AutoCAD SHX Text 3'-11 "34"
AutoCAD SHX Text 8'
AutoCAD SHX Text 1'
AutoCAD SHX Text 10'
AutoCAD SHX Text 1'-6"
AutoCAD SHX Text 4'-6"
AutoCAD SHX Text 3'-11 "34"
AutoCAD SHX Text 10"
AutoCAD SHX Text 1'
AutoCAD SHX Text
INFILL INCLINE FOR CART DRYING AREA
AutoCAD SHX Text
1. BUILD 6" PARTITIONS WITH FRAMING THAT MEETS FCD BUILD 6" PARTITIONS WITH FRAMING THAT MEETS FCD STANDARDS AND MOISTURE RESISTANT DRYWALL. 2. AREA MUST BE ENCLOSED WITH WASHABLE CEILING TILE. AREA MUST BE ENCLOSED WITH WASHABLE CEILING TILE. 3. INSTALL FRP WALL BOARD WALL PROTECTION COLOR INSTALL FRP WALL BOARD WALL PROTECTION COLOR WHITE. FLOOR TO CEILING COVERING. 4. INSTALL 4' WIDE BY 8' HIGH PVC STRIP CURTAIN DOOR, INSTALL 4' WIDE BY 8' HIGH PVC STRIP CURTAIN DOOR, COLOR CLEAR 5. INSTALL (2) RUBBER CAR STOPPER SIDE BY SIDE. INSTALL (2) RUBBER CAR STOPPER SIDE BY SIDE. 6. INSTALL STAINLESS STEEL CORNER GUARDS ON WALL AND INSTALL STAINLESS STEEL CORNER GUARDS ON WALL AND FLOOR BOLTED CORNER GUARDS 7. CONNECT NEW EXHAUST GRILL TO EXISTING EXHAUST CONNECT NEW EXHAUST GRILL TO EXISTING EXHAUST DUCT
AutoCAD SHX Text
CART WASH WALLS
AutoCAD SHX Text
PVC CLEAR PANEL DOOR
AutoCAD SHX Text
WALL CORNER GUARD AND FLOOR BOLTED CORNER GUARD
AutoCAD SHX Text
CAR RUBBER STOPPER
EXHAUST FAN
O U
N D
F L
O O
R H
A L
IF
A
X H
E A
L T
H
D A
Y T
O N
A C
A M
P U
S
P H
A
SE
B U
IL
T
I N
S T
R U
C T
U R
E E
L E
V A
T
IO
N V
IE
W
D A
T E
: 5 /8
/2
SC
A
L E
: 1
/2
'-0
H A
L
IF
A X
H E
A L
T H
D R
A W
N B
Y : A
. R E
Y E
S
T H
IS
D
R A
W
IN
G
IS
N O
T T
O B
E R
E
PR
O D
U
CE
D A
N D
/O R
D
IS
T R
IB
U
T E
D W
IT
H
O U
T W
R
IT
T E
N C
O N
SE
N
T F
R O
M H
A
LI
FA
X
H E
A
LT
H
R E
V
IS
E D
W
N
E
S
LEGENDELEVATION VIEW
KEY NOTES
CART DRYING AREA
AutoCAD SHX Text 3'-11 "34"
AutoCAD SHX Text 8'
AutoCAD SHX Text 1'
AutoCAD SHX Text 10'
AutoCAD SHX Text 1'-6"
AutoCAD SHX Text 4'-6"
AutoCAD SHX Text 3'-11 "34"
AutoCAD SHX Text 10"
AutoCAD SHX Text 1'
AutoCAD SHX Text
INFILL INCLINE FOR CART DRYING AREA
AutoCAD SHX Text
1. FLOORING ON THE DRYING FLOORING ON THE DRYING SECTION OF THE CART WASH MUST BE INCLINED AND INFILL TO HOLD TWO CARTS PLACE RED QUARRY TILE 2. WASHING AREA WILL HAVE WASHING AREA WILL HAVE SLOPPED FLOORS TOWARDS THE DRAINS TO CATCH THE WATER 3. INSTALLATION OF THE CART INSTALLATION OF THE CART STOPPER 1' FROM THE WALL
AutoCAD SHX Text
CART WASH WALLS
AutoCAD SHX Text
PVC CLEAR PANEL DOOR
AutoCAD SHX Text
WALL CORNER GUARD AND FLOOR BOLTED CORNER GUARD
CART RUBBER STOPPER
O U
N D
F L
O O
R H
A L
IF
A
X H
E A
L T
H
D A
Y T
O N
A C
A M
P U
S
P H
A
SE
B U
IL
T
I N
S T
R U
C T
U R
E U
T
IL
IT
IE
S
D A
T E
: 5 /8
/2
SC
A
L E
: 1
'-0
H A
L
IF
A X
H E
A L
T H
D R
A W
N B
Y : A
. R E
Y E
S
T H
IS
D
R A
W
IN
G
IS
N O
T T
O B
E R
E
PR
O D
U
CE
D A
N D
/O R
D
IS
T R
IB
U
T E
D W
IT
H
O U
T W
R
IT
T E
N C
O N
SE
N
T F
R O
M H
A
LI
FA
X
H E
A
LT
H
R E
V
IS
E D
W
N
E
S
LEGEND KEY NOTES
AutoCAD SHX Text
CART WASH AREA
AutoCAD SHX Text
CART
AutoCAD SHX Text
CART DRYING AREA
AutoCAD SHX Text
1. WATER CONNECTION TO EXISTING WILL BE REQUIRED WATER CONNECTION TO EXISTING WILL BE REQUIRED AND A ROLL UP WATER HOSE 2. UTILIZE EXISTING EXHAUST FAN CONNECTIONS AND UTILIZE EXISTING EXHAUST FAN CONNECTIONS AND RELOCATE TO WASHING AREA IF NECESSARY
AutoCAD SHX Text
ROLL UP WATER HOSE
AutoCAD SHX Text
WATER HOSE
AutoCAD SHX Text
ECO LAB CLEANING STATION
AutoCAD SHX Text
ECO LAB CLEANING STATION
AutoCAD SHX Text
EXHAUST FAN
EXHAUST
| Cart Wash-GR.complete scope |
| Sheets and Views |
| Cart Wash-GR.complete scope |
| Cart Wash-GR.SCOPE NOTES |
| Sheets and Views |
| GR.SCOPE NOTES |
| Cart Wash-GR.DEMO -PP (GR2) |
| Sheets and Views |
| Cart Wash-GR.DEMO -PP (GR2) |
| Cart Wash-GR.DEMO -P2 |
| Sheets and Views |
| Cart Wash-GR.DEMO -P2 |
| Cart Wash-GR.DEMO -P3 |
| Sheets and Views |
| Cart Wash-GR.DEMO -P3 |
| Cart Wash-GR.DEMO -P4 |
| Sheets and Views |
| Cart Wash-GR.DEMO -P4 |
| Cart Wash-GR.DEMO -P5 |
| Sheets and Views |
| Cart Wash-GR.DEMO -P5 |
| Cart Wash-scope-p1 |
| Sheets and Views |
| Cart Wash-scope-p1 |
| Cart Wash-scope-p2 |
| Sheets and Views |
| Cart Wash-scope-p2 |
| Cart Wash-scope-p3 |
| Sheets and Views |
| Cart Wash-scope-p3 |
| Cart Wash-GR.scope-p4 |
| Sheets and Views |
| Cart Wash-GR.scope-p4 |
| Cart Wash-scope-p5 |
| Sheets and Views |
| Cart Wash-scope-p5 |
| Cart Wash-GR.scope-p6 |
| Sheets and Views |
| Cart Wash-GR.scope-p6 |
File details come from the government source that posted it. Updated .