1-Quote Request 26-7009-ELD - 25kv Rated Elbow.docx
DOCX document 200 KB Posted
- Attached to
- Quote Request 26-7009-ELD 25kV Rated Elbow
- Solicitation number
- 267009
- Issued by
- Harris County, Texas
About this file
This is a Quote Request document issued by Lubbock Power & Light (LP&L), a municipal utility in Texas, for the procurement of 25kV Rated Elbows. The quote request seeks fifty units of 25kV Rated Cold Shrink 600A Deadbreak Elbow Kits, Item #594040312, manufactured to ANSI/IEEE Standard 386 specifications. The equipment must be a split-resistant EPDM polymer unit qualified for 15/25kV cold shrink deadbreak applications, featuring a rigid holdout core, capacitive test point, integrated cable jacket cutback seal, 350 KCMIL compact tinned aluminum compression lug, and a QR code label identifying individual test results. The preferred manufacturer is Richards Manufacturing (Part #62CSHT2P14G) or approved equal, with specification sheets required for any substitute products. Quotations were due no later than May 13, 2026, at 1:00 P.M. through the Bonfire Portal, with late submissions not accepted. Delivery time is a significant evaluation factor, and factory stock will not be considered. Quote prices must remain firm for a minimum of ten days.
Pricing shall be quoted on a Free On Board (F.O.B.) Destination basis with freight pre-paid and allowed. Bidders must certify most favored pricing, ensuring quoted prices do not exceed the lowest prices charged to other customers for like quality and quantity. Payment terms are Net 30 days unless a prompt payment discount is offered. LP&L reserves the right to make payments using its MasterCard purchasing card without surcharges. The quote request includes standard terms and conditions addressing packaging, shipment, title and risk of loss, inspection rights, warranty obligations, indemnification, compliance with OSHA standards, and adherence to Texas Government Code requirements regarding ownership, firearm entity non-discrimination, and energy company boycott prohibitions. All correspondence must occur through the designated email address, and offerors are prohibited from directly discussing proposals with LP&L board members or staff outside of LP&L-sponsored inquiries, with violations resulting in immediate dismissal from consideration.
View the file
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
26-7009-ELD
Date: 05/07/2026 Quote Request
26-7009-ELD
25kV Rated Elbow Contact Name: Felix Orta
Please submit to Bonfire Portal no later than: 05/13/2026 @ 1:00 P.M. Late quotes will not be accepted.
This Quote is valid for: ___________ (days)
| ITEM |
| DESCRIPTION |
QTY
(more or less)
U/M
| UNIT COST* |
| EXTENDED COST |
| DELIVERY DAYS ARO** |
| 1. |
| 25KV RATED ELBOW Item # 594040312 as specified herein. |
| 50 |
| EA |
| $ |
| $ |
25KV RATED COLD SHRINK 600A DEADBREAK ELBOW KIT SHALL BE MANUFACTURED OUT OF A SPLIT RESISTANT EPDM POLYMER. KIT SHALL BE QUALIFIED TO ANSI/IEEE STD. 386 15/25KV COLD SHRINK DEADBREAK. ELBOW SHALL HAVE A RANGE TAKING SHRINKABLE CABLE ENTRANCE THROAT THAT DOES NOT REQUIRE THE USE OF A CABLE ADAPTER. COLD SHRINK DEADBREAK ELBOW SHALL INCLUDE A CAPACITIVE TEST POINT, AND AN INTERGRATED CABLE JACKET CUTBACK SEAL. COLD SHRINK DEADBREAK ELBOW SHALLUTILIZE A RIGID (NON-SPIRAL WOUND) HOLDOUT CORE THAT EASILY EJECTS FROM THE HOUSING AND COMES AWAY FROM THE CABLE IN 2 HALF SHELLS. KIT SHALL INCLUDE A 350 KCMILL COMPACT TINNED ALUMINUM COMPRESSION LUG, THREADED ALUMINUM STUD, AND AN INSULATING PLUG AND CAP. KIT SHALL INCLUDE A SOLDERBLOCKED TINNED COPPER GROUNDING STRAP. THE ELBOW BODY SHALL BE 100% FACTORY VOLTAGE WITHSTAND TESTED TO 3 PRODUCTION VOLTAGE WITHSTAND TESTS (PARTIAL DISCHARGE TEST, DC IMPULSE WITHSTAND, AND ELEVATED VOLTAGE AC TEST) HOUSING SHALL INCLUDE A QR CODE LABEL THAT IDENTIFIES TEST RESULTS SPECIFIC TO THE INDIVIDUAL PART. KIT SHALL BE SUITABLE FOR USE IN EITHER COPPER OR ALUMINUM MEDIUM VOLTAGE POWER CABLES.
15/25 KV 350KCMIL RICHARDS MANUFACTURING: PART #62CSHT2P14G OR APPROVED EQUAL. IF SUBMITTING AN EQUAL, MANUFACTURER, PART NUMBER AND SPEC SHEET MUST BE INCLUDED.
* Prices quoted are Free On Board (F.O.B.) Destination, Freight Pre-Paid and Allowed.
**Days After Receipt of Order (ARO), delivery time is also a deciding factor on which vendor will be awarded, Factory Stock will not be considered and may result in your quote being deemed non-responsive.
Unless otherwise specified herein, LP&L may award the quote either item-by-item or on an all-or-none basis for any item or group of items shown on the Quote Form.
Quote prices must be firm for a minimum period of ten (10) days. Quotes subject to price increases will not be considered.
Lubbock Power & Light reserves the right to reject any or all bids, reject any particular item on a bid, and to waive immaterial formalities.
The undersigned hereby offers to furnish and deliver the articles or services as specified above at the prices and terms there stated and in strict accordance with the specifications and general conditions of bidding, all of which are made a part of this offer. This offer is not subject to withdrawal.
MATERIAL SAFETY DATA SHEETS: Seller shall provide LP&L with current Material Safety Data Sheets (MSDS) for each chemical sold and defined as hazardous under the Texas Hazard Communication Act (every chemical bearing any manner of warning label on the container).
MOST FAVOURED PRICING: The Bidder certifies that the price quoted is not in excess of the lowest price charged anyone else, including its most favoured customer, for like quality and quantity of the products/services; does not include an element of profit on the sale in excess of that normally obtained by the Bidder on the sale of products/services of like quality and quantity; and does not include any provision for discounts to selling agents. If at any time during the contract period, the supplier should sell or offer for sale to any other customer, an equal or less quantity of similar contract products of like or better quality, at a lower net price(s) than provided herein, supplier agrees to notify LP&L and sell same product(s) at the lower price(s) on all deliveries made during the period in which such lower price(s) is effective.
PAYMENT TERMS – Bidder offers a prompt payment discount of %, net calendar days to apply after receipt of invoice or final acceptance of the goods or services provided, whichever is later. If no prompt payment discount is offered, enter 0 in the % space to indicate Net 30 days, otherwise payment terms shall be Net 30 days. Discounts will not be considered in determining low bid. LP&L MAY MAKE PAYMENTS FOR PURCHASES USING THE CITY’S MASTERCARD PURCHASING CARD (PCARD). THE SELLER AGREES TO ACCEPT PCARD PAYMENTS WITHOUT ANY ADDITIONS OR SURCHARGES.
|_| Agree to accept Lubbock Power & Light’s terms & conditions.
Name of Business (Stamp may be used):
Address: City: State: Zip
DBE Firm:
Woman
Black American
Native American
Hispanic American
Asian Pacific American
Other (Specify)
| By: | Title: | |
| Authorized Representative – Please Print |
| By: | Date: | |
| Authorized Representative – must sign by hand |
Phone Number: Fax Number:
Email Address:___________________________________________________________________________________________
Submit completed form to LP&L Bonfire Portal by the above due date
Delivered FOB To:
City of Lubbock Central Warehouse 306 Municipal Drive Lubbock, TX. 79403 Attn: Paul/Celesta
LUBBOCK POWER & LIGHT TERMS AND CONDITIONS
**** PLEASE READ CAREFULLY ****
These Terms & Conditions apply to all bids and become a part of the terms and conditions of any bid submitted and any Purchase Order submitted hereunder. LP&L shall mean Lubbock Power & Light. As used herein, Seller and Bidder shall mean one and the same person or entity.
1. SELLER TO PACKAGE GOODS. Seller will package goods in accordance with good commercial practice. Each shipping container shall be clearly and permanently marked as follows (a) Seller’s name and address, (b) Consignee’s name, address and purchase order or purchase release number and the supply agreement number if applicable, (c) Container number and total number of containers, e.g. box 1 of 4 boxes, and (d) the number of the container bearing the packing slip. Seller shall bear cost of packaging unless otherwise provided. Goods shall be suitably packed to secure lowest transportation costs and to conform to requirements of common carriers and any applicable specifications. LP&L’s count or weight shall be final and conclusive on shipments not accompanied by packing lists.
2. SHIPMENT UNDER RESERVATION PROHIBITED. Seller is not authorized to ship the goods under reservation and no tender of a bill of lading will operate as a tender of goods.
3. TITLE AND RISK OF LOSS. The title and risk of loss of the goods shall not pass to LP&L until LP&L actually receives and takes possession of the goods at the point or points of delivery.
4. NO REPLACEMENT OF DEFECTIVE TENDER. Every tender of delivery of goods must fully comply with all provisions of this contract as to time of delivery, quality and the like. If a tender is made which does not fully conform, this shall constitute a breach and Seller shall not have the right to substitute a conforming tender, provided, where the time for performance has not yet expired, the Seller may reasonably notify LP&L of his intention to cure and may then make a conforming tender within the contract time but not afterward.
5. INVOICES & PAYMENTS. Seller shall submit separate invoices, in duplicate, one each purchase order or purchase release after each delivery. Invoices shall indicate the purchase order or purchase release number and the supply agreement number if applicable. Invoices shall be itemized and transportation charges, if any, shall be listed separately. A copy of the bill of lading, and the freight waybill when applicable, should be attached to the invoice. Mail To: Lubbock Power & Light, Accounts Payable, P. O. Box 2000, Lubbock, Texas 79457. Payment shall not be due until the above instruments are submitted after delivery.
6. GRATUITIES. LP&L may, by written notice to the Seller, cancel this contract without liability if it is determined by LP&L that gratuities, in the form of entertainment, gifts or otherwise, were offered or given by the Seller, or any agent or representative of the Seller, to any officer or employee of Lubbock Power & Light with a view to securing a contract or securing favorable treatment with respect to the awarding or amending, or the making of any determinations with respect to the performing of such a contract. In the event Seller gives or offers gratuities, as set forth, Seller shall be in breach of this contract, and, LP&L shall be entitled, in addition to any other rights and remedies, to recover or withhold the amount of the cost incurred by Seller in providing such gratuities.
7. SPECIAL TOOLS & TEST EQUIPMENT. If the price stated on the face hereof includes the cost of any special tooling or special test equipment fabricated or required by Seller for the purpose of filling this order, such special tooling equipment and any process sheets related thereto shall become the property of the LP&L and to the extent feasible shall be identified by the Seller as such.
8. WARRANTY-PRICE.
a. The price to be paid by LP&L shall be that contained in Seller’s bid which Seller warrants to be no higher than Seller’s current process on orders by others for products of the kind and specification covered by this agreement for similar quantities under similar of like conditions and methods of purchase. In the event Seller breaches this warranty, the prices of the items shall be reduced to the Seller’s current prices on orders by others, or in the alternative, LP&L may cancel this contract without liability.
b. The Seller warrants that no person or selling agency has been employed or retained to solicit or secure this contract upon an agreement or understanding for commission, percentage, brokerage, or contingent fee, excepting bona fide employees of bona fide established commercial or selling agencies maintained by the Seller for the purpose of securing business. For breach or violation of this warranty, LP&L shall have the right, in addition to any other right, of rights to cancel this contract without liability and to deduct from the contract price, or otherwise recover without liability and to deduct from the contract price, or otherwise recover the full amount of such commission, percentage, brokerage or contingent fee.
9. WARRANTY-PRODUCT. Seller shall not limit or exclude any implied warranties and any attempt to do so shall be void and of no effect, and shall further render this contract voidable at the option of the LP&L. Seller warrants that the goods furnished will conform to the specification, drawings, and descriptions listed in the bid invitation, and to the sample(s) furnished by the Seller, if any. In the event of a conflict or between the specifications, drawings, and descriptions, the specifications shall govern. Notwithstanding any provisions contained in the contract, the Seller represents and warrants fault-free performance and fault-free result in the processing date and date related data (including, but not limited to calculating, comparing and sequencing) of all hardware, software and firmware products delivered and services provided under this Contract, individually or in combination, as the case may be from the effective date of this Contract. Also, the Seller warrants the year2000 calculations will be recognized and accommodated and will not, in any way, result in hardware, software or firmware failure. Lubbock Power & Light, at its sole option, may require the Seller, at any time, to demonstrate the procedures it intends to follow in order to comply with all the obligations contained herein. The obligations contained herein apply to products and services provided by the Seller, its sub-Seller or any third party involved in the creation or development of the products and services to be delivered to Lubbock Power & Light under this Contract. Failure to comply with any of the obligations contained herein, may result in Lubbock Power & Light availing itself of any of its rights under the law and under this Contract including, but not limited to, it’s right pertaining to termination or default. The warranties contained herein are in addition to, and separate and discrete from, any other warranties specified in this Contract, and are not subject to any disclaimer of warranty, implied or expressed, or limitation of the Seller’s liability which may be specified in this Contract, its appendices, its schedules, its annexes or any document incorporated in this Contract by reference.
10. SAFETY WARRANTY. Seller warrants that the products sold to LP&L shall conform to the standards promulgated by the U. S. Department of Labor under the Occupational Safety and Health Act of 1970. In the event the product does not conform to OSHA standards, LP&L may return the product for correction or replacement at the Seller’s expense. In the event Seller fails to make the appropriate correction within a reasonable time, correction made by LP&L will be at the Seller’s expense.
11. NO WARRANTY BY LP&L AGAINST INFRINGEMENTS. As part of this contract, Seller agrees to ascertain whether goods manufactured in accordance with the specifications attached to this agreement will give rise to the rightful claim of any third person by way of infringement of the like. LP&L makes no warranty that the production of goods according to the specification will not give rise to such a claim, and in no event shall LP&L be liable to Seller in any way including, without limitation, for indemnity, in the event that Seller is sued on the grounds of infringement of the like. If Seller is of the opinion that an infringement or the like will result, he will notify LP&L to this effect in writing within two weeks after the signing of this agreement. If LP&L does not receive notice and is subsequently held liable for the infringement or the like, Seller will indemnify and save LP&L harmless from and against any loss, damage or claim of any kind or type. If Seller in good faith ascertains the production of the goods in accordance with the specifications will result in infringement or the like, this contract shall be null and void.
12. RIGHT OF INSPECTION. LP&L shall have the right to inspect the goods at delivery before accepting them.
13. CANCELLATION. LP&L shall have the right to cancel for default all or any part of the undelivered portion of this contract if: (a) Seller breaches any of the terms hereof, including warranties of Seller; (b) the Seller becomes insolvent or commits acts of bankruptcy; or (c) in the event the approval of this contract is subject to ratification by the LP&L Electric Utility Board, this contract is not ratified by the Electric Utility Board when duly presented at a meeting of the Electric Utility Board for ratification. Such right of cancellation is in addition to and not in lieu of any other remedies which LP&L may have in law, equity, contract or otherwise.
14. TERMINATION. The performance of work, or purchase of goods under this contract may be terminated in whole, or in part, by LP&L in accordance with this provision and/or for the grounds set forth in Clause 13, herein. Such termination shall be effected by the delivery of the Seller of a “Notice of Termination” specifying the extent to which the performance of work, or purchase of goods is terminated and the date upon which such termination becomes effective. Such right or termination is in addition to and not in lieu of the rights of LP&L set forth in Clause 13, herein.
15. FORCE MAJEURE. Neither party shall be held responsible for losses, resulting if the fulfillment of any terms of provisions of this contract is delayed or prevented by any cause not within the control of the party whose performance is interfered with, and which by the exercise of reasonable diligence said party is unable to prevent.
16. ASSIGNMENT-DELEGATION. No right or interest in this contract shall be assigned or delegation of any obligation made by Seller without the written permission of LP&L. Any attempted assignment or delegation by Seller shall be wholly void and totally ineffective for all purpose unless made in conformity with this paragraph.
17. WAIVER. No claim or right arising out of a breach of this contract can be discharged in whole or in part by a waiver or renunciation of the claim or right unless the waiver or renunciation is supported by consideration and is in writing signed by the aggrieved party.
18. INTERPRETATION-PAROLE EVIDENCE. This contract, including without limitation, the Invitation to Bid Form, Instruction to Bidders, Terms and Conditions, Specifications and Purchase Orders issued hereunder, and any other documents provided by Seller as part of his bid, is intended by the parties as a final expression of their agreement and intended also as a complete and exclusive statement of the terms of their agreement. Whenever a term defined by the Uniform Commercial Code is used in this agreement, the definition contained in the Code is to control.
19. PUBLIC INFORMATION ACT. The requirements of Subchapter J, Chapter 552, Government Code, may apply to this contract and the contractor or vendor agrees that the contract can be terminated if the contractor or vendor knowingly or intentionally fails to comply with a requirement of that subchapter.
20. To the extent Subchapter J, Chapter 552, Government Code applies to this agreement, Seller agrees to: (1) preserve all contracting information related to the contract as provided by the records retention requirements applicable to the governmental body for the duration of the contract; (2) promptly provide to the governmental body any contracting information related to the contract that is in the custody or possession of the entity on request of the governmental body; and (3) on completion of the contract, either: (A) provide at no cost to the governmental body all contracting information related to the contract that is in the custody or possession of the entity; or (B) preserve the contracting information related to the contract as provided by the records retention requirements applicable to the governmental body.
21. APPLICABLE LAW. This agreement shall be governed by the laws of the State of Texas, including the Uniform Commercial Code as adopted in the State of Texas as effective and in force during the term of this agreement.
22. RIGHT TO ASSURANCE. Whenever one party to this contract in good faith has reason to question the other party’s intent to perform he may demand that the other party give written assurance of his intent to perform. In the event that a demand is made and no assurance is given within five (5) days, the demanding party may treat this failure as an anticipatory repudiation of the contract.
23. INDEMNIFICATION. Seller shall indemnify, keep and save harmless LP&L, its agents, elected and appointed officials and employees, against all injuries, deaths, loss, damages, claims, patent claims, suits, liabilities, judgments, costs and expenses, which may in anywise accrue against LP&L in consequence of the granting of this Contract or which may anywise results therefrom or is related thereto, whether or not it shall be alleged or determined that the act was caused through negligence or omission of the Seller or its employees, or of the sub Seller or assignee or its employees, if any, and the Seller shall, at his own expense, appear, defend and pay all charges of attorneys and all costs and other expenses arising therefrom of incurred in connection therewith, and, if any judgment shall be rendered against LP&L in any such action, the Seller shall, at its own expenses, satisfy and discharge the same. Seller expressly understands and agrees that any bond required by this contract, or otherwise provided by Seller, shall in no way limit the responsibility to indemnify, keep and save harmless and defend LP&L as herein provided.
24. TIME. It is hereby expressly agreed and understood that time is of the essence for the performance of this contract, and failure by contract to meet the time specifications of this agreement will cause Seller to be in default of this agreement.
25. MBE. Lubbock Power & Light hereby notifies all bidders that in regard to any contract entered into pursuant to this request, minority and women business enterprises will be afforded equal opportunities to submit bids in response to this invitation and will not be discriminated against on the grounds of race, color, sex or natural origin in consideration for an award.
26. In the event Seller shall fail to perform under this contract, as provided herein, Seller shall be in default hereunder. In the event of default, LP&L shall be entitled to exercise any right or seek any remedy available to it by law, equity, contract, or otherwise. The remedies are cumulative and non-exclusive and may be exorcised concurrently.
27. OWNERSHIP REPRESENTATION AND WARRANTY. To the extent Chapter 2274, Texas Government Code applies to this contract, Contractor represents and warrants that it is not, and during the term of this contract will not be (1) owned by or the majority of stock or other ownership interest of Contractor will not be held or controlled by (i) individuals who are citizens of China, Iran, North Korea, Russia, or a designated country, as defined in Section 2274.0101, Texas Government Code; or (ii) a company or entity, including a governmental entity, that is owned or controlled by citizens of or is directly controlled by the government of China, Iran, North Korea, Russia, or a designated country as defined in Section 2274.0101, Texas Government Code; or (2) headquartered in China, Iran, North Korea, Russia, or a designated country as defined in Section 2274.0101, Texas Government Code. Contractor warrants and represents that LP&L’s contract with Contractor therefore does not and will not violate Texas Government Code Section 2274.0101, et seq.
28. NON-DISCRIMINATION AGAINST FIREARM ENTITIES/TRADE ASSOCIATIONS. Contractor hereby warrants that it is in compliance with Chapter 2274, Subtitle F, Title 10 of the Texas Government Code by verifying that: (1) it does not have a practice, policy, guidance, or directive that discriminates against a firearm entity or firearm trade association, and (2) it will not discriminate during the term of the contract against a firearm entity or firearm trade association.
29. NON-BOYCOTT OF ENERGY COMPANIES. Contractor hereby warrants that it is in compliance with Chapter 2274, Subtitle F, Title 10 of the Texas Government Code by verifying that: (1) it does not boycott energy companies, and (2) it will not boycott energy companies during the term of this agreement.
Failure to comply with the listed Terms & Conditions will result in disqualification of quote.
Communications and Anti-Lobbying Provision during the Proposal Process
ALL CORRESPONDENCE CONCERNING THIS QUOTE REQUEST SHALL ONLY OCCUR THROUGH THE ESTABLISHED PROCESS BY E-MAILING 45TUmmoniz@mylubbock.usU45T. VIOLATIONS ARE A CAUSE FOR IMMEDIATE DISMISSAL FROM FURTHER CONSIDERATION IN THIS PROCESS.
DURING THE PERIOD BETWEEN THE PROPOSAL RELEASE DATE AND THE AWARD, OFFERORS, INCLUDING THEIR AGENTS AND REPRESENTATIVES, SHALL NOT DIRECTLY DISCUSS OR PROMOTE THEIR PROPOSAL WITH ANY MEMBER OF THE LP&L ELECTRIC UTILITY BOARD, LP&L CONSULTANT OR LP&L/CITY STAFF EXCEPT IN THE COURSE OF LP&L-SPONSORED INQUIRIES, BRIEFINGS, INTERVIEWS, OR PRESENTATIONS, UNLESS REQUESTED BY LP&L.
THIS PROVISION IS INTENDED TO HELD MAINTAIN A LEVEL PLAYING FIELD FOR ALL PARTICIPANTS, TO HELD CONFIRM THAT RESOURCE DECISIONS ARE MADE ACCORDING TO THE ESTABLISHED PROCESSES, AND TO OTHERWISE PROTECT THE INTEGRITY OF THE RFP PROCESS. VIOLATION OF THIS PROVISION IS CAUSE FOR IMMEDIATE DISMISSAL OF A PARTICIPANT.
8 | Page image1.png
File details come from the government source that posted it. Updated .