1-EPR-1_SDS_US.pdf

PDF 181 KB Posted

Attached to
Competitive Selection OH|DOT101L26-5
Contract number
DOT101L26-5
Issued by
Ohio

About this file

This document is a Safety Data Sheet (SDS) for EPR-1 PRIME®, a product manufactured by D & D Emulsions, Inc., located in Mansfield, Ohio. The SDS provides comprehensive safety and technical information about the product, which is an asphalt restorative seal, recycling emulsion, and asphalt cold pour crack filler. The document is not a contract itself, but a regulatory compliance document detailing the chemical composition, safety precautions, handling instructions, and potential hazards associated with the product.

The product contains less than 30% asphalt and less than 35% petroleum distillates, with additional proprietary ingredients. It is classified as a brown liquid with a mild petroleum odor and is not considered environmentally hazardous. The product has specific handling recommendations, including using protective eyewear, gloves, and chemical-resistant clothing. The SDS indicates that while the product is not classified as particularly dangerous, it may cause temporary eye or skin irritation and is listed as a potential carcinogen under California Proposition 65. The manufacturer provides a 24-hour emergency contact number through CHEMTREC for any safety-related inquiries.

View the file

Other files

File Type Posted
1-2022-03-01_SDS_US_-_CYCLOGEN__ME__1_.pdf PDF
1-Cyc_ME_Tech_Data_Page_2.pdf PDF
1-DB_Safety__Health__Envir._page_1.pdf PDF
1-Dust_Bond_Specs.pdf PDF
1-Dust_Bond_Tech_Data_page_2.pdf PDF
1-EPR-1_Tech_Data_page_1.pdf PDF
1-EPR-1_Tech_Data_page_3.pdf PDF
1-101LPricing_26_2025.xls XLS spreadsheet
1-2022-01-04_SDS_US_-_C-23.pdf PDF
1-Cyc_ME_Tech_Data_Page_1.pdf PDF
1-DB_Safety__Health__Envir._page_3.pdf PDF
1-EPR-1_Tech_Data_page_2.pdf PDF
101L-26.pdf PDF
101L__26__recommend.pdf PDF
1-2022-01-04_SDS_US_-_DUST_BOND.pdf PDF
1-C-23_Brochure_5_26_11.pdf PDF
1-C-23_Specs.pdf PDF
1-C-23_Tech_data_page_2.pdf PDF
1-Cyc_ME_Tech_Data_Page_3.pdf PDF
1-DB_Safety__Health__Envir._page_2.pdf PDF
1-Dust_Bond_Tech_Data_page_1.pdf PDF
1-Affirmation_20250321145336.pdf PDF
1-C-23_Tech_data_page_1.pdf PDF
1-C-23_Tech_data_page_3.pdf PDF
1-Cyclogen_ME_Spec.pdf PDF
1-EPR-1_Prime_Specs.pdf PDF
1-New_Cyclogen_Brochure.pdf PDF
1-Proposal___1-prop_answer.xls XLS spreadsheet
Signature__4___1___002_.pdf PDF
Show all 29

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file

Text version

SAFETY DATA SHEET

1. Identification Product identifier EPR-1 PRIME®

Other means of identification Not available

Recommended use Asphalt Restorative Seal/Recycling Emulsion/Asphalt Cold Pour Crack Filler

Recommended restrictions Follow the manufacturer’s instructions.

Manufacturer/Importer/Supplier/Distributor information

Manufacturer

Manufacturer: D & D Emulsions, Inc.

Address: 270 Park Avenue East

P.O. Box 1706

Mansfield, OH 44901

24- Hour Telephone Number:

CHEMTREC: 1-800-424-9300 (USA and Canada)

CCN794154

2. Hazard(s) identification Physical hazards Not classified

Health hazards Not classified

Environmental hazards Not classified

OSHA defined hazards Not classified

Label elements

Hazard symbol None

Signal word Not applicable

Hazard statement Not applicable

Prevention Not applicable

Response Not applicable

Storage Not applicable

Disposal Not applicable

Hazard(s) not otherwise None known classified (HNOC)

Supplemental information Not applicable

3. Composition/information on ingredients Mixtures

Chemical name Common name and synonyms CAS number %

ASPHALT 8052-42-4 <30

DISTILLATES (PETROLEUM), 64742-52-5 <35

HYDROTREATED HEAVY

NAPHTHENIC

PROPRIETARY INGREDIENTS N/A <35

4. First-aid measures Inhalation Move to fresh air. Call a physician if symptoms develop or persist.

Skin contact Wash off with soap and water. Get medical attention if irritation develops and persists.

Eye contact Rinse with water. Get medical attention if irritation develops and persists.

Ingestion Rinse mouth. Do not induce vomiting without the advice from poison control center. If vomiting occurs, keep head low so that stomach content doesn’t get into the lungs.

Most important Direct contact with eyes may cause temporary irritation.

symptoms/effects, acute and delayed

Indication of immediate Treat symptomatically medical attention and special treatment needed

General information Ensure that medical personnel are aware of the material(s) involved, and take precautions to protect themselves.

Material name: EPR-1 PRIME® SDS US

5712 Version #: 04 Revision date: 04-16-2015 Issue date: 12-23-2014 1 / 6

5. Fire-fighting measures Suitable extinguishing media Water fog. Foam. Dry chemical powder. Dry chemicals. Carbon dioxide (CO2).

Unsuitable extinguishing media Do not use water jet as an extinguisher, as this will spread the fire.

Specific hazards arising from During fire, gases hazardous to health may be formed.

the chemical

Special protective equipment Self-contained breathing apparatus and full protective clothing must be worn in case of fire.

and precautions for firefighters

Fire-fighting Cool containers exposed to heat with water spray and remove container, if no risk is involved.

equipment / instructions

Specific methods Use standard firefighting procedures and consider the hazards of other involved materials.

6. Accidental release measures Personal precautions, Keep unnecessary personnel away. For personal protection, see section 8 of the SDS.

protective equipment and emergency procedures

Methods and materials for Large Spills: Stop the flow of material, if this is without risk. Dike the spilled material, where this is possible. Cover containment and cleaning up with plastic sheets to prevent spreading. Absorb in vermiculite, dry sand or earth and place into containers. Following product recovery, flush area with water.

Small Spills: Wipe up with absorbent material (e.g. cloth, fleece). Clean surface thoroughly to remove residual contamination.

Never return spills to original containers for re-use. For waste disposal, see section 13 of the SDS.

Environmental precautions Avoid discharge into drains, water sources or onto the ground.

7. Handling and storage

Precautions for safe handling Avoid prolonged or repeated contact with skin. Avoid prolonged exposure. Use only in well- ventilated areas.

Conditions for safe storage, Keep away from heat and sources of ignition. Store in original tightly closed container. Store away from incompatible including any incompatibilities materials (see section 10 of the SDS).

8. Exposure controls/personal protection Occupational exposure limits

US. OSHA Table Z-1 Limits for Air Contaminants (29 CRF 1910.1000)

Components Type Value Form

DISTILLATES PEL 5mg/m3 Mist.

(PETROLEUM),

HYDROTREATED HEAVY

NAPHTHENIC (CAS

64742-52-5)

US. ACGIH Threshold Limit Values

Components Type Value Form

ASPHALT (CAS 8052-42-4) TWA 0.5mg/m3 Inhalable fraction

US. NIOSH: Pocket Guide to Chemical Hazards

Components Type Value Form

ASPHALT (CAS 8052-42-4) Ceiling 5mg/m3 Fume.

DISTILLATES STEL 10mg/m3 Mist.

(PETROLEUM),

HYDROTREATED HEAVY

NAPHTHENIC (CAS 64742-52-5)

TWA 5mg/m3 Mist.

Biological limit values No biological exposure limits noted for the ingredient(s).

5712 Version #: 04 Revision date: 04-16-2015 Issue date: 12-23-2014 2 / 6

Appropriate engineering Provide adequate ventilation, including appropriate local extraction, to ensure that the defined occupational exposure controls limit is not exceeded.

Individual protection measures, such as personal protective equipment

Eye/face protection Wear safety glasses with side shields (or goggles).

Hand protection Wear protective gloves.

Skin protection

Other Wear appropriate chemical resistant clothing.

Respiratory protection Not available

Thermal hazards Wear appropriate thermal protective clothing, when necessary.

General hygiene Always observe good personal hygiene measures, such as washing after handling the material and before eating, drinking, considerations and/or smoking. Routinely wash work clothing and protective equipment to remove contaminants.

9. Physical and chemical properties

Appearance Brown Liquid

Physical state Liquid

Form Not available

Color Brown

Odor Mild Petroleum Odor

Odor threshold Not available pH Not available

Melting point/freezing point Not available

Initial boiling point and 212 °F ( 100 °C ) boiling range

Flash point Not available

Evaporation rate Not available

Flammability (solid, gas) Not available

Upper/lower flammability or explosive limits

Flammability limit – lower Not available

Flammability limit - Not available upper ( % )

Explosive limit – lower Not available

Explosive limit – upper Not available

Vapor pressure Not available

Vapor density Not available

Relative density Not available

Solubility (ies)

Solubility (water) Readily Dispersible

Partition coefficient Not available

(n-octanol/water)

Auto-ignition temperature Not available

Decomposition temperature Not available

Viscosity Not available

Other information

Specific gravity 1.0

10. Stability and reactivity Reactivity The product is stable and non-reactive under normal conditions of use, storage and transport.

Chemical stability Material is stable under normal conditions.

Possibility of hazardous No dangerous reaction known under conditions of normal use.

reactions

Conditions to avoid Avoid temperatures exceeding the flash point. Contact with incompatible materials.

Incompatible materials Strong oxidizing agents.

Hazardous decomposition No hazardous decomposition products are known.

products

5712 Version #: 04 Revision date: 04/16/2015 Issue date: 12-23-2014 3 / 6

11. Toxicological information Information on likely routes of exposure

Ingestion Expected to be a low ingestion hazard.

Inhalation Prolonged inhalation may be harmful.

Skin contact No adverse effects due to skin contact are expected.

Eye contact Direct contact with eyes may cause temporary irritation.

Symptoms related to the physical, Direct contact with eyes may cause temporary irritation.

chemical and toxicological characteristics

Information on toxicological effects

Acute toxicity Not available

Skin corrosion/irritation Prolonged skin contact may cause temporary irritation.

Serious eye damage/eye irritation Direct contact with eyes may cause temporary irritation.

Respiratory or skin sensitization

Respiratory sensitization Not available

Skin sensitization This product is not expected to cause skin sensitization.

Germ cell mutagenicity No data available to indicate product or any components present at greater than 0.1% are mutagenic or genotoxic.

Carcinogenicity Contains a substance/a group of substances which may cause cancer.

IARC Monographs. Overall Evaluation of Carcinogenicity

ASHPALT (CAS 8052-42-4)

US. OSHA Specifically Regulated Substances (29 CRF 1910.1001-1050)

Not Listed

Reproductive toxicity This product is not expected to cause reproductive or developmental effects.

Specific target organ toxicity Not classified

- single exposure

Specific target organ toxicity Not classified

- repeated exposure

Aspiration hazard Not available

Chronic effects Prolonged inhalation may be harmful.

12. Ecological information

Ecotoxicity The product is not classified as environmentally hazardous. However, this does not exclude the possibility that large or frequent spills can have a harmful or damaging effect on the environment.

Persistence and degradability No data is available on the degradability of this product.

Bioaccumulative potential No data available

Mobility in soil No data available

Other adverse effects No other adverse environmental effects (e.g. ozone depletion, photochemical ozone creation potential, endocrine disruption, global warming potential) are expected from this component.

13. Disposal considerations

Disposal instructions Collect and reclaim or dispose in sealed containers at licensed waste disposal site.

Local disposal regulations Dispose in accordance with all applicable regulations.

Hazardous waste code The waste code should be assigned in discussion between the user, the producer and the waste disposal company.

Waste from residues/unused products Dispose of in accordance with local regulations. Empty containers or liners may retain some product residues. This material and its container must be disposed of in a safe manner (see: Disposal instructions)

Contaminated packaging Empty containers should be taken to an approved waste handling site for recycling or disposal.

Since emptied containers may retain product residue, follow label warnings even after container is emptied.

5712 Version #: 04 Revision date: 04-16-2015 Issue date: 12-23-2014 4 / 6

14. Transport information

DOT

Not regulated as dangerous goods.

IATA

Not regulated as dangerous goods.

IMDG

Not regulated as dangerous goods.

Transport in bulk according to Not available

Annex II of MARPOL 73/78 and the IBC Code

15. Regulatory information

US federal regulations All components are on the U.S. EPA TSCA Inventory list.

TSCA Section 12 ( b ) Export Notification (40 CRF 707, Subpt. D)

Not regulated

CERCLA Hazardous Substance List (40 CRF 302.4)

ASPHALT (CAS 8052-42-4)

US. OSHA Specifically Regulated Substances (29 CRF 1910.1001-1050)

Not listed

Superfund Amendments and Reauthorization Act of 1986 (SARA)

Hazard categories Immediate Hazard – No

Delayed Hazard – Yes

Fire Hazard – No

Pressure Hazard – No

Reactivity Hazard – No

SARA 302 Extremely hazardous substance

Not listed

SARA 311/312 No

Hazardous chemical

SARA 313 (TRI reporting)

Not regulated

Other federal regulations

Clean Air Act (CAA) Section 112 Hazardous Air Pollutants (HAPs) list

Not regulated

Clean Air Act (CAA) Section 112 ( r ) Accidental Release Prevention (40 CRF 68.130)

Not regulated

Safe Drinking Water Act Not regulated

(SDWA)

US state regulations

US. Massachusetts RTK – Substance List

ASPHALT (CAS 8052-42-4)

DISTILLATES (PETROLEUM), HYDROTREATED HEAVY NAPHTHENIC (CAS 64742-52-5)

US. New Jersey Worker and Community Right-to-Know Act

Not regulated

US. Pennsylvania RTK – Hazardous Substances

ASPHALT (CAS 8052-42-4)

US. Rhode Island RTK

Not regulated

US. California Proposition 65

WARNING: This product contains a chemical known to the State of California to cause cancer.

US – California Proposition 65 – CRT: Listed date/Carcinogenic substance

ASPHALT (CAS 8052-42-4) Listed: January 1, 1990

5712 Version #: 04 Revision date: 04-16-2015 Issue date: 12-23-2014 5 / 6

International Inventories

Country (s) or region Inventory name On inventory ( yes/ no)*

Australia Australian Inventory of Chemical Substances (AICS) Yes

Canada Domestic Substances List (DSL) Yes

Canada Non-Domestic Substances List (NDSL) No

China Inventory of Existing Chemical Substances in China (IECSC) Yes

Europe European Inventory of Existing Commercial Chemical Substances Yes

(EINECS)

Europe European List of Notified Chemical Substances (ELINCS) No

Japan Inventory of Existing and New Chemical Substances (ENCS) No

Korea Existing Chemicals List (ECL) Yes

New Zealand New Zealand Inventory Yes

Philippines Philippine Inventory of Chemicals and Chemical Substances (PICCS) Yes

United States & Puerto Rico Toxic Substances Control Act (TSCA) Inventory Yes

*A “Yes” indicates that all components of this product comply with the inventory requirements administered by the governing country(s)

A “No” indicates that one or more components of the product are not listed or exempt from this listing on the inventory administered by the governing country(s).

16. Other information, including date of preparation or last revision Issue date 12-23-2014

Revision date 04-16-2015

Version # 04

Disclaimer The information provided in this Safety Data Sheet is correct to the best of our knowledge, information and belief at the date of its publication. The information given is designed only as a guidance for safe handling, use, processing, storage, transportation, disposal and release and is not to be considered a warranty or quality specification. The information relates only to the specific material designated and may not be valid for such material used in combination with any other materials or in any process, unless specified in the text.

Revision Information Composition / Information on Ingredients: Ingredients

Physical & Chemical Properties: Multiple Properties

GHS: Classification

5712 Version #: 04 Revision date: 04-16-2015 Issue date: 12-23-2014 6 / 6

File details come from the government source that posted it. Updated .